User Assigned to Org.unit

Hi all...
I have list of user ..i want to find these users assigned to org.unit ?
i need the list in production.. so i can't write the code...
how can i find? any view or direct table which will list these stuff..
thanks...

Hello,
Use HRP1001 table:
SELECT objid FROM hrp1001 WHERE sobid = 'user ID' AND plvar = 'active PLVAR'
SELECT sobid FROM hrp1001 WHERE objid = objid
SELECT sobid FROM hrp1001 WHERE otype = 'S' AND objid = sobid AND sclas = 'O'.
Regards.
Laurent.

Similar Messages

  • User inconsistencies when re-assigning users to another org. unit

    Hi
    I am getting error messages whenever i re-assign a user to another org. unit. I use drag and drop. When I check the user with users_gen I get 3 different error messages. I try the repair but the repair does not work. Has anyone else experienced this problem. Does anyone know any notes that can be used to fix this?
    We are on extended classic, SRM 5.0
    Kind regards

    Deepa,
    Please check for non-inherited values.  We maintain values at the org unit level, so that when we drag/drop a user to another org unit, most to all of the values are re-inherited. You can which ones are by the inherited flag.
    See if that is your problem.
    Regards, Dean.

  • Unassign users from a Org unit and reassign to another org unit

    Hello Friends,
    There are users in my org who are already assinged to a org unit through USERS_GEN transaction (from SU01 users) and are creating shopping carts for the past four months without any issue.
    Now there is a requirement to assign few of the users to another org unit.
    I have created that org unit but not sure how to reassign it to a new org unit.
    I am new to SRM. Any help will be appreciated.

    Hi Dihsa,
    Thanks for the fast reply.
    In that link it has been mentioned that users can be unassigned from a org unit through USERS_GEN txn or drag and drop.
    I already unassigned a user by clicking on delete assignment in PPOSA_BBP. While I am trying to reassign the user through USERS_GEN to new org unit, I am getting the error: Central Person for this user already exists with E BBPU_MESSAGES 042 &.
    After going through some of the threads I realized that I should not do like that for deleting a assignment.
    Also I found one thread which is telling that ....new org unit has to be selected and then by clicking on the Assign button --> Incorporates..Postion.. a user can be reassigned.
    Is it a right way to do that.... I don know how to unassign using USERS_GEN txn.
    Also it would be great if you could help me to resolve the above error.
    Please guide me.

  • Assignment of org units from feeder system to Legal units

    Hi All,
    in GTS system , IMG,  assignment of legal units having two options are available.
    1,Assign plant at feeder system level/ feeder system group level
    2, Assign combination of plant and storage location at feeder system level/ feeder system group level
    as assigning the org units we need to assign the option 1 and option 2 or do we need to assign the any one from the above two options.
    can you please give some inputs which is the best assignment.
    Thanks,
    Sriman

    Hi Sriman,
    In SAP GTS, a Feeder system plant or a plant and Storage location combination can either be assigned to a GTS Legal Unit.
    In this case, you can either assign a single plant ( or Plants) to a Legal Unit to complete the Organisational Mapping or you can also assign a combination of plant and Storage location ( of a group of plant and respective storage locations)  to a GTS Legal Unit if storage location is of further significance while interacting with the SAP GTS System,
    I hope you got it now.
    Regards,
    Aman

  • How to find users logged on Org Unit

    Hi All,
    We are setting up printing on our CRM 5.0 system (Web interaction centre) and was wondering if anyone knows of a way to find out what Org unit the users is logged on as ??
    We are using Actions to print specific smartforms off for the users and need the prints to go to an assigned printer.. We are hoping to use a printer that is assigned to the 'Default Printer' attribute in the org structure (PPOMA_BBP)
    As you will be aware users can be in many positions (under the org units) in the org structure and when we log onto the Web IC we get the option of which one we would like to use... Is there a function that can read this Org unit so we can use it in the printer determination BADI to decide what printer the prints will go to ???
    Many Thanks
    Gaz

    In case anyone is still looking for this solution, here is how:
      data: lr_usett type ref to cl_crm_ui_user_cb.
      lr_usett = cl_crm_ui_user_cb=>get_instance( ).
      call method lr_usett->get_org_object
        importing
          ev_org_objid   = lv_objid
          ev_org_objtype = lv_otype.

  • User defective after org. unit change-Dont want to change BP

    Hi,
    We are on SRM 4.0 and we replicate our org. strcture from backend R/3.
    Whenever any user in the org. structure is moved from one org. unit to another the user becomes defective and it needs to be repaied at level 02.
    The repair level 02 requires deletion of old BP and creation of new BP. We dont want the deletion of BP to happen.
    Some of the forum answers have been to unassign the BP and assign it again in the new org. unit. But I'm not sure why but it's not helping in my case.
    I would appreciate if someone can send me a screenshots of the above steps(Unassign and reassigning BP) .
    Best regards,
    Sam

    Hi,
    Please follow the below procedure for unassign and reassign BP.
    1- Goto Tcode PPOMA_BBP.
    2- Right Click on the BP which you want to unassing.
    3- Select Delete-->Assignment.
    By doing the above steps you can unassign the BP.
    Now for re-assigning the BP to the ORG.
    1- Goto TCode USERS_GEN.
    2- Choose "copy user and employee datafrom template".
    3- Choose the option "Create Users from Existing SU01 Users".
    4- Give the Org Unit (ID) in which you want to reassign the BP.
    Now your BP will assign to the given Org Unit
    Regards,
    Sachin

  • Employee resposnsibles Org unit Determination  (Employee is assigned to Org Unit)

    Hi ,
    We want to determine Org unit based on employee responsible but not on basis of USER.
    Employee responsible will be assigned to a particular position in Organization .
    We want to determine Organization unit where Employee is assigned .
    When in transaction Partner Function employee responsible is selected then Organization unit to which employee is assigned should get determined.
    When employee resposnsible is changed Org unit (Service ) should change .
    Please suggest solution.
    Thanks & Regards,
    Anup Reche

    Hi
    first u need to do the filter settings in object BUPA_MAIN to stop the employee replication to R3.
    When u create the no. ranges in r3 u can remove the filter so that the process will continue.
    Regards
    Manohar

  • EBP Security -  Users under single org unit

    Hi All,
    My Client has a question on EBP Security and I want you experts to help me in this regard, as I did not work on it before.
    Initial screen of transaction code USERS_GEN, its better says to limit number of users under a single Organizational Unit to 200, just to avoid performance issues.  (EBP Version 4.0)
      Right now my client has over 300 users under a single Organizational Unit and they are planning to add more. They want to find out, what potential problems or performance issues can be expected if, they go beyond 200.
    Thanks in advance.
    MK

    There is no performance involved in the number of users sharing the same org unit.
    The number of different Org Objects  in a single role make an impact on performance, but can be ignored.
    What has an impact is the number of Org units you want to segregate on as it will impact the number of role variants to create and maintain, this is not a system performance issue, but a personnel/cost issue!

  • Inheritance of a role assigned to Org Unit

    Dear Experts,
    Im facing the following issue: via TA PFCG i assign roles to orgunits which works fine. But once i create a new orgunit with  a position and a person underneath the existing orgunit, i doesnt inherit the assigned role of the orgunit above. The same problem occurs while assigning a new person to an existing position (for example 3 instead of 2 consultants).
    I have updated the assignment evry time i changed something, and all the prerequisites are fullfilled.
    Is there a way to solve this problem? Do i have do change the evaluation path?
    I would be very grateful if someone postet.
    Thanks alot in advance.
    Christian

    Hi,
    Please run report RHPROFL0 after you made new assignments in OM. There you need to select right evaluation path to assign roles from positions and org.units.
    Cheers

  • How does workflow retrieve users under an org. unit when sending email

    Dear All:
    Workflow supports sending email activity where you can specify the receipt type and receipt ID. For example, the email is supposed to send to the users within an organizational unit.
    I am just wondering how SAP workflow determines the users within an organizational unit? Does it use HR-ORG evaluation path to get objects under an org. unit?
    Many Thanks in advance!
    Haifeng

    Hi,
    For example, the email is supposed to send to the users
    within an organizational unit.
    Yes workflow template and standard task are also part of organizational unit. As you mentioned that the if the recipient type is choosen as Organizational Object then the workflow system will try to fetch the data from the organizational unit based on the recipient ID you provided in the mail step let say if you are using the recipient id as position Id then workflow system will try to get the data from the organizational unit
    Org object types supported by the workflow system are US, C, S, O....
    If at all the you choose the workflow recipient type as email address which can be a external address then in that case it just simply makes use of BCS communication methods and and in this case your SCOT settings must be configured properly.
    The difference between the first and second  is, in the first case the work items or mails/documents will be sent to sap inbox (SBWP) in the second case it depends on the mail ID you mention for example a outlook mail ID.
    Regards
    Pavan

  • How to assign & changed org. unit to employee Id

    Hi
    We want to move some employees from one organizational unit to newly created one in transaction code PPOM_OLD.
    In PPOM_OLD i created new Org. unit ,assign position then assigned existing employee pernr.
    But when i see in PA30 the organizational unit remains same.
    Even when i observed in PA0001 table i can see two entries for one employee number the old entry is with organizational unit where as new one doesn't have organizational unit at all
    Please guide me how can i do changes.
    Best Regards

    Dear Raza,
    Go to pa30- given the Perner-select infotype action 0000-period- all-click on overview
    Now you can view all records related to infotype action-select the new created records-choose icon delete.
    Now create the new organization unit, Position & their relationships through t-code pp01.
    now transfer of employee from old position to new position through action tcode –pa40- select appropriate personal action (promotion, reorganization, transfer etc.)
    Put the perner and effective date –execute –in next steps change details as per requirement i.e. in second part- organ. Assignment –
    New position details –xxxxxxxx  /Personnel area-xx/Employee group-x/Employee sub group-xx
    Save.
    System goes to next info type  0001-
    In the same way give the require details & save.

  • Business Partner number not assigned to ORG unit

    hello colleagues,
    I cretaed an Org Unit at the highest level, i have assigned Basic data, address data and i have assigned  function and attribute, but when i save the Org unit,I am not getting the BP number,
    can anyone tell me what could be reaosn for this, but normally whenever a new org unit is created
    a BP has to be assigned to it right
    please help me with this problem
    regards
    chandu

    Hi Chandu,
    To create a bp number & relationship for org unit follow the below process
    ==> SPRO
    ==> Customer Relationship Management
    ==> Master data
    ==> Business Partner
    ==> Integration Business Partner-Organization Management
    ==> Create Business Partner Initially
    Click on Organisational Unit(s) and provide the input as 'ID' of the ORG and Execute
    Click on the line and right click and select 'Start Repair'
    If Bp is already existing, u wnat to build only relation ship follow the below process.
    ==> Use Tcode SE37
    ==> Use functional module as 'HR_OBJECTBUPA_INSERT' and Execute
    ==> Click on the value button and enter OT as 'O', OBJID as ID of the org BUPAGUID as
    Businesspartner GUID and Execute
    Regards,
    PePe

  • Positions assigned to Org Units

    Dear Consultants,
    There are some designations / Positions (like Clerk / Assistant etc) common in more than one departments. How can we assign it in System?? When we assign any designation to the second department, the first assignment is delimited automatically.
    can we specify that a person is working in a specific org unit? I think it is determined upon the Position.
    Regards
    Bindumadhav
    9869028264

    Hi Bindumadhav,
    Expecting that you are still looking out for replies, let me clarify one thing.
    The Positions that you have mentioned here (like Clerk / Assistant etc) are not Positions, but Jobs. Jobs generally tell you what kind of activity is involved, whereas positions are specific individual employee assignments. You can create a Job and use that to Describe various positions. But each of these positions can Belong to one Org Unit (Department) only.
    Kindly revert back if you require further clarification.
    Thanks and Regards,
    Leena

  • Users within an org unit

    Hi,
    is there a function module or a table by which we can find all the users within a purchasing group of purchasing organisatiopn unit.
    Looking for a quick response.
    Regards,
    Neha

    Hi Neha,
    Just run this FM
    BBP_OM_STRUC_GET_USER_FROM_ORG
    2.click on  START_OBJECTS
    3. Under OT just type O and under OBJID provide the Org Unit Number for ex 50000123
    4.Click on Back Button and Execute
    5. Under Export Parameters you wil find  a internal table called "USER_TAB" with list of entries
    6.Click on that , there you will find the list of users under that particular Org unit
    Sameer

  • Not able to view reports by users under top org unit- Interactive Reports

    HI,
    We are using CRM interactive reports.
    In my project the client is having 3 Sales Org with two sales office and two sales group for each office respectively.
    When the document is created by the  sales Executiv, he and his manager is able to see it in the reports but the top person of that org unit is not able to see  the report.
       Some say the report can be viewed by only employee responsible and his manager. In my project the core team is sitting in the top ORG unit. They want to see the reports of all the sales org units.
    With Regards,
    Selvam T

    Dear Luke,
    I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
    Is there any specific step that needs to be done to see these branches.
    By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
    Regards
    Hkishan

Maybe you are looking for