User Assignment in Portal

Hi,
I am trying to assign a user in the BI system to a user in the portal (all other steps of BI-EP integration have been done).
After I Iog in to the portal and go to iView User Management, I am not able to find User Mapping option anywhere.
I am having the admin rights for this system and the EP version is 7.
Please can anyone guide where I can find user mapping option or if there is any other way to do so.
Thanks,
CD

hi,
If you have configured SSO using tickets then u dont have to do any mapping for the system.
If you want SSO to be acheived using UserMapping:
Go to you BI system->open permissions->Add your user or group-> Dont forgot to CHECK end user checkbox-->save
Go to User Administation->select the group or user->In bottom details of the User or Group will be opened --> System Mapping Tab from left hand corner -->> assign the username and password of BI for that User of Group.
Regards
Parth
==**Points will be appreciated===

Similar Messages

Issue in Step 12-Maintain User Assignment in Portal (RSPOR_SETUP)

Hi,
I had issue with step 12--Maintain User Assignment in Portal when running prog RSPOR_SETUP [to setup BEx Web configuration] with error " System failure during call of function module RSWR_RFC_SERVICE_TEST".
Note: BI certificate was already exported & imported to Portal.
Evaluate Ticket Login Module is done with trustedsys, trustediss & trusteddn.
Evaluate Assertion Ticket Login Module is done with trustedsys, trustediss & trusteddn.
User-id: bex_admin with SAP_ALL in ABAP and mapping is done in Portal as per step 12 intruction.
Error in dev_jrfc.trc:
Exception thrown [Tue Jan 16 09:24:46,102]:Exception thrown by application running in JCo Server
com.sap.engine.services.rfcengine.RFCException: Incoming call is not authorized
 at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:74)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Authentication failed.
Caused by: com.sap.security.core.server.jaas.DetailedLoginException: Authentication failed: Issuer of SAP Logon Ticket is not trusted. Authentication stack: evaluate_assertion_ticket
 at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:167)
It looks like the issue with evaluate_assertion_ticket & somehow Portal is not trusted the BI certificate. I tried SAP note 917950, 888687, 878455, 721815, etc. & many more but cannot resolved the issue.
SAP system: NW04s with Java add-in in the same server.
SP stack 9
I appreciate if someone already resolved the same issue and share the solution. I already opened a ticket with SAP but they have no solution yet.
Thanks.
Mimosa

Hi
Try maintaining the following property values for the SAP BW System:
Authentication Ticket Type = SAP Assertion Ticket
 Logon Method = SAPLOGONTICKET
 User Mapping Type = admin,user
Regards,
Trikanth Basetty

If user login in portal we need to assign him, the perticular system

Hi all,
i have the requirement
if user logins in portal, depending on the user we need to assign him a system( bapi or rfc),
the user database is maintained in a table in MDM. if an user login in portal it should check in MDM to which region(america, asia.europe....) it belog,s to. according to that we need to assign the system(rfc or bapi). if the user belong's to two regions we need to assign the two links(rfc's or bapi's) regions,
help me in doing step by step
Thanks in advance
Best Regards
charan

Hi Charan,
This is same thread as - Depending on the user we need to assign the system
Regards,
Sen

Your user has no SAP Support Portal user assigned

Hi all,
in transaction SM37 I found a job that almost everytime ends with error. Name of the job is "SM:SYNC SAP SESSIONS" and it's executed daily. The error message is :
Job started
Step 001 started (program RDSWPCISERVICEPLAN, variant &0000000000452, user ID SYS_JOBYSAP)
Your user has no SAP Support Portal user assigned
Job cancelled after system exception ERROR_MESSAGE
Everyday the job is scheduled automatically by another job "SM:SCHEDULER". I suppose that is same on your systems.
I know the error message say that I should try to assign S-user to user SYS_JOBYSAP but I think it should not be the problem because some days the job ends with no errors. Also when I duplicate some old job (with status Cancelled) and execute it immediately the job ends in green.
Do you have any idea what could be wrong? Is it possible that there is some problem with connection to SAP almost regularly everyday in same time?
Best regards,
Zbynek

I would like to check whether the SAP service that is used by job SM:SYNC SAP SESSIONS is running in given time. I need to re-schedule job SM:SYNC SAP SESSIONS to other time. How is it possible? I think the job SM:SCHEDULER uses some table that contains detail informations about scheduled jobs. Is it right? Do you know name of the table?
Regards
Zbynek

How do assign the user of Consumer Portal to the role of Product Portal?

Hello All:
Use FPN, now I want to assignment the role of Consumber Product Portal the user of Consumer Portal to the user of Consumer Portal(RRA) .But because There are too many user that needed be configured.It is arduous work.
So Pls help me and tell me how to import the role of Product portal to the user of Consumter Portal,
Thanks In addvance.
jideliang

Thank all:
Because I want assign the Remote Role of Produce to user of Consumer with FPN.Use:
[Role]
rid=Role1
rdesc=Role description
user=MarcPeters;JackSmith;Alan_Fox;
group=HappyBuyersOf2003;HappyBuyersOf2002
Can not import.
I have find the document "How to Automate Content Creation via XML Content and Actions (NW7[1].0).pdf", it help me to use XML to import the role,the following format:
<Action id="com.sap.portal.roleassignment">
<Roles>
<Role name="pcd:portal_content/myFolder/myRole" producer.alias = "myProducer">
<Principal type="user" id="test"/>
But when I import the XML file.There is a error.
Have someone used it ?
jideliang
</Role>
</Roles>
</Action>
How

Hide Top level navigation if user assigned only one role

Hi,
I would like to hide the top level navigation if user assigned with only one role.
I can create role based rule to show desktop using Master rule collection, but is it possible by doing to with role count.
If user has multiple roles show desktop1 else show desktop2

not sure if this possible ,you may check feasibility of creating a application which checks user role count and if role count is = 1 load the Portal url (URL alais) which had TLN iview invisible in the same window else do nothing and load the portal with the desktop which has tln.
Put the application in framewrk page which has TLN visible.
create a URL alias and create a desktop -framework page which dont have TLN ,assign this desktop to this URL alias in rule collection set its priority before user conditions check in rule collection so that it has high priority before user or group check in rule collection.
you can create a poc in sandbox and check if it wiorks?

Delete User assigned to a task

Hi experts,
I would like to delete a user assigned to a task using the Administration area in guided procedures tab of the portal.
So I go to : Guided procedures TAB --> Administration --> Maintain Processes --> Running process list --> Change Authorization --> New User Assignments
But unlike this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/173dceea-0c01-0010-0698-819d627fed79
on page 7,
the "Remove User" button is not present.
Can someone explain why?
Is this an error of the document or is it possible to remove a user assigned to a task?
Thanks,
Luca

Thank you very much for your answer Sudhir.
Now I know why the button is not present in my portal.
Luca

How to view a BI query with anonymous user in the portal

Hi Gurus,
Does anybody knows how to view a BI query in the portal with anonymous user?
Cause when i try to view a query the portal always ask for authentification. And i don't want to sign with a user cause my portal is for everybody and if the user logged in it shows the roles that previously were assigned.
I have the Netweaver 2004 with SP9
Thank you Very Much

do you have sso configured between portal and BW server, if yes the authentication pop up should not come.
if you dont want to do sso between portal and bw server and still want to logon to BW query with anonymous user,
in you bw server go to transaction sicf and navigate to DEFAULT_HOST->SAP->BW->BEX and double click on bex node in the resulting window, log on details section provide a default userid/password
Raja

TLN missing for users in Federated Portal Network Setup

Hello All,
We are facing a weird problem in our Federated portal Production setup; when the users login to portal they are not able to see the TLN. On further investigating we found that this issue is happening when the user id is locked in any of the producer portals within our FPN environment due to which the users are not able to view roles related to other systems as well in which there id is active.
This issue is reproducable but only occur once the ID are locked and password is expired in one of the assigned system.
Our FPN setup is as below:
Consumer C connects to Producers
1. A (RDL)
2. B (RDL) - BI Dual Stack
3. D (RRA) - BI Dual Stack
In turn A (producer) connects to 4 ECC systems (F3, M1, R1, R5)
We are using RRA and RDL both in our environment.We have connected all federated portal with P4 Port, so if required we
can use RDL.
Please note our consumer C is EHP1 SP5 and both BI systems B and D are EP 7 sp13.
Any help in this regard is highly appreciated as this is critical issue affecting users in our production environment badly.
Regards,
Priyanka

Hello,
This was an SAP bug. We raised an OSS message and it is taken care now. User now gets TLN and then portal runtime error if the id is locked.
Regards,
Priyanka

How to enable create user option in portal under user administration?

Hi,
In Portal, in user administration tab, always the create user and Copy to New user option is disabled, how can i enable those?
-Siva

If the AS ABAP is your datasource for your users there is NO WAY you can create users in the portal UME.
● If the UME has read-only access, you cannot modify user attributes stored in the ABAP system, like first name and last name. You can modify attributes stored in the UME database, like street. Even if read-only access is assigned, users can still change their own passwords.
● If the UME has read-write access, you can create users using the tools of the J2EE Engine. Users created in this way are stored as users in the ABAP system. Extended user data that cannot be stored in the standard ABAP user record is stored in the database of the UME.
in the read/write access the users are created only in the ABAP side and not the java. If you have the read access you cannot create users in the abap side. hence you need the SAP_BC_JSF_COMMUNICATION role to create users in the AS ABAP.....
Trust me .......bottomline ....you cannot create users in the JAVA UME if you have AS ABAP as your datasource !!!!
hope this helps..
\m/

How to restrict Basis from User admin in Portal

Hi,
Iam looking to delete action Manage ALL action from Administrator role and add ReadALL so that basis is not given access to User admin in Portal. we already have Manage_All in a role that is assigned to security. However iam not sure of the problems. please advise if there would be any problem in tweaking the Administrator role as these are standard UME roles.
Thanks in advance.

Hi,
Please try to modify User adminitrator role in the portal.
Content Administrator>>Portal Content>>Content Provided by SAP>>Admin Content>>User Administrators>>Right click on "User Admin" role >>Permission>> IN "Everyone" Group, Uncheck the 'End User' column. then SAVE your permision.
Hope this will helps you to resolve your issue.
Thanks
Arun Jaiswal

Dynamic role Assignment in Portal using Web dynpro Java?

Hi All,
We have following requirement for dynamic role assignment.
1) User Login to Portal.
2) User Clicks on Home Tab in Portal, through RFC/BAPI, get Role from Backend(ECC) and compare the role ID with Portal Object ID through UME.
Role gets assigned in Portal after comparison, if it exists in Portal.
Can you please let me know what all steps I need to do to complete the above assignment.
Thank you
Ravi

Thanks Tobias.
To be precise I will explian my requirement.
1) User Login ( User ID will be input to RFC)
2) RFC will get Role for that user ID from Backend(ECC) and return that role ID to Portal.
3) Now With the help of UME API, need to search role ID in Portal, If it exists, no action.
If Role ID does not exists, then it shuld assign that role in Portal.
Sorry for tedious comment.
I am a bit new to webdyn pro.
Can you please tell me each step i need to follow to complete the above requirement.
Many Thanks,
Ravi

OIM 9.1.0.2: Remove user assigned to a task in Provisioning Process

I have read Note: Ability to Have Multiple Approvers Per Resource Object in OIM [ID 429999.1], and executed each steps described in it. But when grant these resource object to some user. First the request was not sended directly to a approval process, as had been expected that I would. The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
I need to send directly to a approval process, because that's where I have defined my levels of approval.
I'm using oim 9.1.0.2 BP18 running on OC4J 10.1.3.5 on AIX 6.1 64-bit clustered install with two nodes, Oracle Database 10.2.0.4 on AIX 6.1 64-bit on RAC.

Hello Everyone,
Thanks for your response. Actually i have a Approval Process, where i have defined my levels of approvals. In Resume I have this Env. :
1.- A Resource: ResourceA
2.- A Provisioning Process in relation with ResourceA.
3.- A Approval Process in relation with ResourceA.
The request was send to a provisioning process, specifically to user has been assigned a task, when the user approves the request until the request is then sent to approval process.
I need to send directly to a approval process, because that's where I have defined my levels of approval. In other words i need to bypass the user assigned a task in provisioning process.

How to restrice ananymous user access to portal link /irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?

Hi experts,
We had an issue with portal access. I wonder if portal is venerable for security threats?
Could you please let me how to restrict the unauthorized users (anonymous user) to the portal URL.
https://HOST:50001//irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default .
Appreciate your help.
Regards
Maruti

Hi Maruti,
Hope you are doing good.
Can't you just amend the portal permissions so that this access is not possible.
The PCD location should be:
com.sap.portal.system/security/sap.com/NetWeaver.Portal/no_safety/com.sap.portal.navigation.portallauncher....
Hope this helps.
Thank you and have a nice day!
Kind Regards,
Hemanth

Getting error while creating the user in user administration in portal

Hi folks,
i am unable to create the user in user administration in portal due to the following error,
could you please help regarding this issue
"Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".

Hi All,
I am closing this thread as this is not in the correct forum. This should be opened in LDAP or UME. Please open the thread under the correct heading.
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
http://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

User Assignment in Portal

Similar Messages

Maybe you are looking for