User Attribut doesn't get removed

Hello Experts
I recently added a new user attribut to the "Active Directory User Discovery" which i use in a new query based user collection. This actually works pretty well and the attribut shows up in the user properties.
But if i remove the attribute value in active directory via the attribute editor, the old value still exists in configuration manager 2012 r2 even after a week. I manually initiated a Full User Discovery but the value is still there and doesn't show
as empty.
Is this a normal behaviour?
Thanks in Advance
Regards,
Simon

Hi,
I guess that SCCM doesn't remove the existed attribute value if you remove the user attribute from Active Directory User Discovery and it just detects these attributes you added. You could try to discover a new user to see whether there is a value for
the attribute after removing the attribute. If there is no value, I think Narcoticoo's suggestion could help you to clear the old value.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

ASP getting removed when updating Template

Hello,
I have a strange problem I can seem to find an answer for.
I'm using Dreamweaver Templates, and on some of my individual pages I am also using ASP code for contact forms.
In theory this code is outside the template and shouldn't be removed when I do a template update because codeOutsideHTMLIsLocked is set to false.
The bolded line of code is the ASP code on my child pages, and everytime I update the template this line of code gets removed. It seems that if I remove the @ symblo the code doesn't get removed. But I don't think it's valid ASP anymore.
<%@ Page Language="C#" CodeFile="default.aspx.cs" Inherits="contactform" ResponseEncoding="utf-8" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
Now when I run an update on my main template, and check my child page, the ASP code will be removed.
The strange thing is that if I use placeholder text instead, it won't be stripped/removed out of the template.
The pain is I have about 10 pages (for now) to add this line to everytime I update the template, which is actually happening more and more now.
Does anyone know why this particular ASP code gets removed any time I update my Main template?
Thanks,
M
/edit: It seems that if I remove the @ from this line, I can the code to "stick" and not be removed.

If I understand correctly, Dreamweaver will treat the area outside the HTML as an editable region when codeOutsideHTMLIsLocked is set to false?
If my maintemplate has this code: /Templates/mainTemplate.dwt
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

And my child page has this code: /products/index.php
<%@ Page Language="C#" ContentType="text/html" CodeFile="default.aspx.cs" inherits="contactform" ResponseEncoding="utf-8" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
Theoretically now when I update the mainTemplate.dwt Dreamweaver shouldn't strip this code out. Correct?
If this being correct, when I use Dreamweaver and update the mainTemplate.dwt it strips this editable region out of the child pages. This is not excepted result, I was excepting that Dreamweaver to leave this code alone in its editable region.
Thanks in advance David,
-M.

Problem in maintain attributes for position in maintain user attributes

Hi All ,
I am facing a problem in Maintain User Attributes
I should get only 5 values for any user in attributes dropdown of attributes for position
But for some users I am getting as 10 values
and for some users I am getting it as 20 values ..
What my doubt is
will it be based on role dependency or anyother one ..
Pls let me know if u have any idea ..
Thanks
Kumar

Hello,
The ability of changing attributes via User settings depends on the role
assigned to the user and whether this role has the appropriate rights to
change the attributes.
In this regard, check the customizing below:
SRM -> SRM Server -> Cross Application Basic Settings -> Roles ->
Maintain Attribute Access Rights by Role.
Here you define which parameter can be changed depending on the role
assigned to user in question.
Regards,
Ricardo

How to get user attributes from LDAP authenticator

I am using an LDAP authenticator and identity asserter to get user / group information.
I would like to access LDAP attributes for the user in my ADF Taskflow (Deployed into webcenter spaces).
Is there an available api to get all the user attributes through the established weblogic authenticator provider or do i have to directly connect to the LDAP server again?
Any help would be appreciated

Hi Julián,
in fact, I've never worked with BSP iViews and so I don't know if there is a direct way to achieve what you want. Maybe you should ask within BSP forum...
A possibility would be to create a proxy iView around the BSP iView (in fact: before the BSP AppIntegrator component) which reads the user names and passes this as application params to the BSP component. But this is
Beginner
Medium
Advanced
Also see http://help.sap.com/saphelp_nw04/helpdata/en/16/1e0541a407f06fe10000000a1550b0/frameset.htm
Hope it helps
Detlev

My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

you can change the accounts of different apps in the phone's settings menu.

How to get the users list that can Add/Remove or modify Vendors in Oracle?

How to get the users list that can Add/Remove or modify Vendors in Oracle?
I need to generate a report like name and responsibility. Thanks

That query gives the Supplier information.
But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
I assume it should be based on the Responsibility.

Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

Got the "apple firewire ntsc" choice to show up even if grayed out and "missing" under "audio/visual" menus by recreating choices in Easy Setup under "final cut pro" MENU thank GOODNESS because I was reading horror stories on here about this under another thread with someone trashing preferences, reinstalling and the works and still not getting it to show up...on my search now for an analog/digital converter up at b&h...find it odd that the s video connector wouldn't show the crt monitor when I put both displays through the 3870...I switched it back to see if it worked again when only the one dell monitor display was there and there it is again mirroring the screen display on my desktop...just can't be seen as an "external monitor" in fcp...couldn't find anything specific in the shane ross threads to this. I'm sad the program doesn't just see the s video connection though the 3870 though my computer does fine and will query up at b&h in regard to what might be affordable as far as a digital/analog converter. It's also weird in itself that when I put the two dell monitors on the one card my computer no longer could see the s video crt connection...makes no sense. Will report in later as to what I discover up at b&h as I'm sure there's a world of people out there using this sony crt monitor still even into the upgrades with computers and software so I imagine therein lies the solution. Thanks again and I'll report in as to what hardware might be suggested for me.

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Satellite L20: Modem doesn't get dial tone

Hi,
My L20 notebook doesn't get a dial tone whem I'm trying to dial up. On antoher pc the connection works well, so I'm sure that the line has a dial tone and that the other computer is 'listening'.
I also tried to uncheck the 'wait before dial tone' option, tried to remove it from the Device manager, but after this all the modem still doesn't work. The current driver that is installed is version 7.20.00.00, because I can't install the latest version (7.25.00.00) (setup doesn't finish well, no specific error is given).
Does anybody knows what to do??

Open the system control panel and choose the Phone and modem options.
There check the Modems tab. The modem should be placed in the list.
If not, so you need to install the modem driver.
Check the Modem function by pressing the "Query Modem" button.
If the Modem Information window contain a list of AT commands (including ATI2, ATI3, ATI4 etc.), then the modem is correctly installed. The ATI5 command ends in with the number for the selected Regional settings (for example Germany = 06).
To change the Regional Setting please use the Toshiba Internal Modem Region Select Utility.

Report on Active Directory User Attributes in SCCM 2012

I need to output a list of all users in a collection, along with certain user attributes from Active Directory. I can get part of what I need with the following query:
SELECT v_FullCollectionMembership.ResourceID,
v_R_User.Windows_NT_Domain0,
v_R_User.Distinguished_Name0,
v_R_User.Full_User_Name0,
v_R_User.Mail0,
v_R_User.User_Name0
FROM v_FullCollectionMembership, v_R_User
WHERE v_FullCollectionMembership.ResourceID = v_R_User.ResourceID
AND v_FullCollectionMembership.CollectionID = 'SMS00002'
If possible I need to add:
Last logon timestamp
User account status (enabled or disabled)
I have added "lastLogon" and "lastLogonTimestamp" as additional attributesunder Active Directory User Discovery. This discovery method is enabled and I have run a full discovery about a month ago, and again today. I read in
another thread that these attributes should appear in the table v_R_User, however they have not. Is v_R_User the right place to look for this or is there another view or table I can query?
Once I have the above sorted out, how can I find the user account status in SCCM? I have done reports in the past directly from AD and used the 'useraccountcontrol' attribute and I noticed there is a column named 'User_Account_Control0' in v_R_User, however
the values do not match those found in Active Directory.
Thanks.

Have you checked the attribute from the Active Directory in decimal format? Check that and compare it to the value ConfigMgr has stored in its 'User_Account_Control0'...
User Account Control tells you multiple things of the account, for example does the account have "Smart card login required" -option checked from the account properties.
The tricky part here is to actually get the report show you what you really want, because "useraccountcontrol" -attribute is a numeric value, you have to calculate what decimal combination means what in readable text.
More info on the attribute can be found from here
http://support.microsoft.com/kb/305144 and from there you can also find the values for different settings. For example:
account is enabled = 512
account is disabled = 514
account is enabled with smart card = 262656

OIF11g - Help on sending user attributes in HTTP header

Hello, I have a OIF11g setup configured for both IdP and SP. Upon successfull authentication against LDAP, I need to end some user attributes on the HTTP header to the SP application. I do no have OAM in my setup, so there is no option of Webgate or Policy Manager to do that. As far as I read the config doc, I'm in the impression that we need to write a custom authentication engine to accept user credentials and code to authenticate against LDAP and also add attributes to the response header.
Before I go down that path, just wanted to confirm if anybody has done this with OIF?
Thanks,
Sunil.

Bernhard:
Actually the headers are not set to null. I have an intermediate index.jsp page which is the first page that is redirected to by the AM - it is this page which calls my LoginServlet.
The value appears consistently on this index.jsp page but after it is forwarded to the LoginServlet it starts behaving inconsistently. I check the system.out log in my websphere /logs folder and that tells me that LoginServlet does not consistenly get these values from the header.
The wierd part is that if I use cookies or attributes, it works perfectly - each time every time. However, only in the case of headers (which is the method i am required to do) it behaves inconsistently.
ANY feedback/help on this would be really appreciated bern.. thanks..
~saahil

All the steps involved in creating user attributes

where is it documented on how to create user attributes that are stored in the ldap?
I created a jspprovider channel, and I can get data out of the user attributes in the samplecontent.jsp by:
JSPProvider p = (JSPProvider)pageContext.getAttribute("JSPProvider");
SSOTokenManager mgr = SSOTokenManager.getInstance();
SSOToken token = mgr.createSSOToken(request);
AMStoreConnection dpc = new AMStoreConnection(token);
String name = token.getPrincipal().getName();
AMUser user = dpc.getUser(name);
Map attMap = user.getAttributes();
Collection valueCollection = attMap.values();
Iterator valueIterator = valueCollection.iterator();
int iSize = attMap.size();
Set attKeySet = attMap.keySet();
Iterator keyIterator = attKeySet.iterator();
and then iterate through to display them all.
I then tried to store a value using the sampledoedit.jsp file:
JSPProvider p = (JSPProvider)pageContext.getAttribute("JSPProvider");
SSOTokenManager mgr = SSOTokenManager.getInstance();
SSOToken token = mgr.createSSOToken(request);
AMStoreConnection dpc = new AMStoreConnection(token);
String name = token.getPrincipal().getName();
AMUser user = dpc.getUser(name);
String aname = request.getParameter("attributeName");
Object aval = request.getParameter("attributeValue");
HashMap attMap = new HashMap();
attMap.put(aname,aval);
user.setAttributes(attMap);
user.store(true);
response.sendRedirect((String)pageContext.getAttribute("url"));
For whatever reason, I get an error, and in the debug I just get couldn't set attributes.
Then, when I try to retreive the list of attributes, the new name/value pair is created, but the value is blank.....
Any ideas? Or a link on a step by step process on how to create user attributes?

BTW, here is the error I get in the debug log:
01/06/2005 12:43:47:232 PM AST: Thread[service-j2ee,5,main]
ERROR: DesktopServlet.handleException()
com.sun.portal.providers.ProviderException: JSPProvider.processJSPFile(): jsp=doedit.jsp, com.sun.portal.providers.ProviderException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp, com.iplanet.am.sdk.AMException: Unable to set attribute(s) com.sun.portal.desktop.taglib.DesktopTaglibException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp,
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:880)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:644)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
com.sun.portal.providers.ProviderException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp, com.iplanet.am.sdk.AMException: Unable to set attribute(s) com.sun.portal.desktop.taglib.DesktopTaglibException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp,
at com.sun.portal.desktop.taglib.provider.ProcessEditTag.doStartTag(ProcessEditTag.java:28)
at jsps.etc._opt._SUNWps._desktop._AnyWarePortal_en_CA._JSPEditContainer._html._doedit_jsp._jspService(_doedit_jsp.java:193)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:863)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:644)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
com.sun.portal.providers.ProviderException: JSPProvider.processJSPFile(): jsp=sampledoedit.jsp, com.iplanet.am.sdk.AMException: Unable to set attribute(s)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:880)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.taglib.provider.ProcessEditTag.doStartTag(ProcessEditTag.java:26)
at jsps.etc._opt._SUNWps._desktop._AnyWarePortal_en_CA._JSPEditContainer._html._doedit_jsp._jspService(_doedit_jsp.java:193)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:863)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:644)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)
com.iplanet.am.sdk.AMException: Unable to set attribute(s)
at com.iplanet.am.sdk.AMDirectoryManager.processInternalException(AMDirectoryManager.java:247)
at com.iplanet.am.sdk.AMDirectoryManager.setAttributes(AMDirectoryManager.java:2151)
at com.iplanet.am.sdk.AMCacheManager.setAttributes(AMCacheManager.java:867)
at com.iplanet.am.sdk.AMObjectImpl.store(AMObjectImpl.java:1573)
at jsps.etc._opt._SUNWps._desktop._AnyWarePortal_en_CA._WebFolders._html._sampledoedit_jsp._jspService(_sampledoedit_jsp.java:118)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:863)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.taglib.provider.ProcessEditTag.doStartTag(ProcessEditTag.java:26)
at jsps.etc._opt._SUNWps._desktop._AnyWarePortal_en_CA._JSPEditContainer._html._doedit_jsp._jspService(_doedit_jsp.java:193)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:863)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:777)
at com.sun.portal.providers.jsp.JSPProvider.processEdit(JSPProvider.java:673)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:644)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:320)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)

Accessing user attributes from a pipeline component

Hello,
I'm using WLCS & WLPS 3.1. I use webflow and I have implemented the page
transition myself to work with the portal. Everything is working fine.
I'm planning to implement a complex step of a business process as a pipeline
component. For various reasons, this PC will be implemented as an EJB. To
perform its job, this PC needs to get information about the user that is
currently logged in. More specifically, it needs to lookup custom attributes
from the user profile (i.e. user property set).
So my question is : is this possible directly from the PC, or do I have to
populate the pipeline session with required information in the input
processor?
Thank you for your advice
Nicolas

Hello Ture,
Thanks for both posts.
Nicolas
"Ture Hoefner" <[email protected]> wrote in message
news:[email protected]..
... To perform its job, this PC needs to get information about the userthat
is
currently logged in. More specifically, it needs to lookup customattributes
from the user profile (i.e. user property set).
So my question is : is this possible directly from the PC, or do I haveto
populate the pipeline session with required information in the input
processor?Hello Nicolas,
I have not tried this myself. I think that the disconnect between the
pipeline session and the portal session is probably the fact that theattributes
in the portal session have their keys "fixed up" by prepending the portal
request URI. This is made possible by the
com.beasys.commerce.foundation.flow.jsp.DefaultDestinationDeterminer,which the
PortalDestinationDeterminer extends. It puts a "TRAFFIC.URI" attributeinto the
each request that goes through the FlowManagerServlet for the portal. Inthe
Acme exampleportal, the "SERVICEMANAGER.USER" attribute is put into theportal
HttpSession as "exampleportal.SERVICEMANAGER.USER".
If you want to get to the cached profile from your portal from yourpipeline
component (PC) then you would have to know that the name is "fixed up" tobe
"exampleportal.CACHED_PROFILE". There are probably several different waysyou
could get the "TRAFFIC.URI" information to your PC.
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

Inject User Attributes into SAML Credential Mapper V2 Assertions

We are using SAML CMV2 on 10.0 MP1 and we would like to add user attributes in SAML assertions '<attributestatement>'.
How do we inject attribute statements in assertions?
[url http://e-docs.bea.com/wls/docs100/dvspisec/credmap.html]
AT:
- Do You Need to Develop a Custom Credential Mapping Provider?
- 3rd paragraph, 4th sentence...
States that the AttributeStatement can be configured to house user information. I have looked all over on how I can 'configure' the SAMLCMV2 to inject the user info we want (DN, favorite color, anything).
Any input would be great,
Thanks!
Edited by dejavuuuuu at 03/18/2008 5:57 AM
Edited by dejavuuuuu at 03/18/2008 5:59 AM

Looks like it is not available in Weblogic 10 MP1 and we might have to wait for 10.3 where you get the SAMLCredentialAttributeMapper.
http://edocs.bea.com/wls/docs100/javadocs/weblogic/security/providers/saml/SAMLCredentialAttributeMapper.html

User Attribut doesn't get removed

Similar Messages

Maybe you are looking for