User availabilty while creating a Property Category

Hi,
We have the current system with Authentication mode set as Mixed, while creating a Property Category I can see only the Users with Internal Authentication mode are available for selection as part of Property Category not the one with CSS mode, please suggest.
Thanks,
MM

off cource Yes, but I am curious why the users are not shown for selection while creating/modifying the Property category,
Murali

Similar Messages

User id while creating a purchase order

Hello all,
I would like to know whether there is any option to enter the user id or user name while creating a purchase order. If so could anyone post on how to do that.
Thanks,
Maxx

If you are creating PO in foreground, you dont have the option of giving user id.
But if you create POs in background using a scheduled job, then when you are scheduling the job, you can overwrite the default user id and give the user id you want. In this case all the POs created by the job, will have the user id created by you.
But if you have to create a PO through background job, you have to give the inputs to PO through some programs may be BDCs or LSMW.
Reward if this helps. you

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri

User exit while creating delivery (VL01N)

Hi Experts,
Is there any User Exit, While creating Outbound Delivery with reference to Sales order using VL01N,subitem cannot be created without the related H.Level item.
So my requirement is:
Check Higher Level Item (VBAP-UEPOS), If Higher Level Item value is set for an item, ensure that the related item that the Higher Level Item value refers to is also on the same delivery. If not, then issue an error that sub item cannot be created without the related HLI item.
How to achieve this, Any user exit ? Help will be appreciated.
Thanks,
Ranjith.

Hi,
You may use Report ZNEGI16 given in below link to find out the user exits and BADIs associated with the above T code.
How to find BADIs
Kindly let me know if this was of any help to you.
Regards,
Shayeree

Error Mssg while creating Org Model Category

Hello guru's
When i am creating Org madel Category in spro, after filling all the fields at last i am getting an errot message stating "Prefix Number :entry missing for the system CD1 clint150.
Can u please help out in this regards
Best Regards
Sreeram

Hi,
You need to maintain a setting in transaction OOW4. The path for this is :
SAP Web Application Server  SAP Web Application Server  Business Management  SAP Business Workflow  Basic Settings  Maintain Prefix Numbers
Prefix number: <number between 900 and 999 (customer namespace)> (e.g., 900)
SAP System ID: <ID of your CRM system> (CD1)
Client Number: <Number of your CRM client> (150)
This shall remove the error.
Regards,
Shalini Chauhan

Use resource user attributes while creating a user

Hi All,
I'm developing a resource adapter for our rescource, and need to input attribute to real create that user in the rescoure. by modify skeleton resource adapter I have no where to fonud the field to input attributes for my resorce user, but for ldap there is form in tab Attribute for ldap user create, how can I do same thing in my adapter?
Thanks a lot,
Alice
Message was edited by:
Alice_1234

If you are creating PO in foreground, you dont have the option of giving user id.
But if you create POs in background using a scheduled job, then when you are scheduling the job, you can overwrite the default user id and give the user id you want. In this case all the POs created by the job, will have the user id created by you.
But if you have to create a PO through background job, you have to give the inputs to PO through some programs may be BDCs or LSMW.
Reward if this helps. you

User exit while creating delivery from sales order

Hi Guys ,
Is there any user exit in sales order which triggers when we try to DELIVER(from the menu bar) .
My requirement is to not include some line items(base on some condition) before they are included in the delivery .
Thnx in advance .
Anil

Hi Naimesh ,
Thnx for your reply.
I'm not sure of the functionality in VOFM .Can u please tell me how can i acheive my current functionality as explained above in my question .
I'll tell u my requirement .
When creating delivery , I have to check for some condition and depending upon this condition , the line items must not be included in the delivery .
I have acheived this by BADI LE_SHLP_DELIVERY~SAVE_DOCUMENT_PREPARE.
if suppose any line items gets deleted in the delivery(based upon my condition) , and then if I look at the status of the slaes order(VA03) , it shows partially confirmed at the header level and the item which is rejected(in delivery) shows OPEN .
Can u tell me how to update the status of the sales order header and item level (if any item is deleted) during creation of delivery .
Thnx .
Anil

User exit to prevent delivery while creating (VL01N).

Hi Experts,
Is there any User Exit, While creating Outbound Delivery with reference to Sales order using VL01N,subitem cannot be created without the related H.Level item.
So my requirement is:
Check Higher Level Item (VBAP-UEPOS), If Higher Level Item value is set for an item, ensure that the related item that the Higher Level Item value refers to is also on the same delivery. If not, then issue an error that sub item cannot be created without the related HLI item.
How to achieve this, Any user exit ? Help will be appreciated.
Thanks,
Ranjith.

Hi
I think that creating your own VOFM copying requirement from SO to delivery and setting it in copy rules (tcode VTLA) you can achieve. Take an standard as a template and develop the algorithm.
I hope this helps you
Regards
Eduardo

Error while creating OLAP connection in IDT

Hi friends,
I am facing error while creating OLAP connection in IDT (BO 4.1 sp2)
I am using sql server 2012.In the screen shots you can observe server name and user name of the Sql server
I am creating OLAP connection to connect CUBE
Check the screen shots for the error
Plz help me
Here you can see the server name and user name
While creating OLAP connection I gave these credentials
This is the error I am getting

Hi..
To create connection and access the BW data, developer must have the password. and while create connection using Authentication Mode: Single Sign On, need to loin the username has pattern <SID~client/SAP userid>,
User Name: SID~client/SAP userid
Password for the SID,
Authentication as SAP.
Plese find the below link for more info: http://scn.sap.com/community/semantic-layer/blog/2014/06/19/pre-requisite-authorizations-in-sap-bw-side-before-develop-the-universe

Error in the ISA User Admin to create users

Hi all
i am not able to create the users thru the ISA user admin. while creating the user for new contact persons we are getting the error as " User Does not Exist" and also while creating the user for existing contact persons we are getting error as " User already Exists". in our project landscape CUA also part along with CRM and Portal. i am not able to find out from where exactly we are getting the error either from CRM side or else from CUA side.
Regards
suresh babu

Hi,
You can open any process in an iview which is assigned to a page and to a role. Once you click on this role, the process will get initiated and the webdynpro application will be displayed.
If you open the instantiating url, it will ask for the input parameters that are to be passed to the application and initiates the application. It does not display your webdynpro page.
For the iview you have created, Assign this iview to a page, and then assign it to a role. Assign the role to your user id and then open the role. Also mention in the iview parameters if any role based information has to be passed.
Award points if helpful.
Regards,
Sujana

To through custumize warning messages while creating PO

Hi All,
I want to through some warning message throgh user exit while creating PO is there any standar message id i can use to through warning message i know '00' with number 398 but that is working only for error message.
Regards
Sagar

If you're doing these in an exit, you decide in your code whether A,E,I,W, message type. Beware though, how you present...you might want to do I messages with the "display like E" addition. I utilize message 016 from message class GR a lot...It's just placeholders and you can then issue messages with three or four values, like:
message e016(gr) with
<document> <item> 'text' 'more text'
etc.... mix and match up to four values, literals, constants, text-elements, etc.

How to customize Category and Category items list while creating New Model

Hi,
what the most convenient way to customize the Category and Category items list while creating New Model?
This is standard:
Now, what we want to achieve, is to customize this menu, to:
1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
1. Customize the standard New Model menu window
2. Create copies of City Planning Diagrams with different set-ups
3. Set the relationship between diagrams
Is such a configuration change possible?
Thanks a lot for your help!
Regards,
Rafal

Now, what we want to achieve, is to customize this menu, to:
Question #1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
Click on Tools => General Options=> Model Creation
Click on Properties => at right of Default category set
Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
To create a new category set with BPMN choice
a) Copy default.mcc in MyNewDefault.mcc file.
    Go to Tools=>General Options=>Model Creation : Select your new category
    Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
or
b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
    Quit the window.
    Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
    Edit properties and remove all things you does not want keep.
    Save you new category
Question #2. How to define copies/replicas of existing diagrams
     Wrote an extension
Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
     Specify yours conditons in your extension attached to your model
     Example : When the user want create a child diagram : You can display a list of Parent Diagrams to select from.
     You can set in your extension by VBScript parent-child relationship
Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
If I understand well your question. I suggest to take a look in
Repository=>Administration=>Objects Permission Profile
You can specify objects to show, mask, deactivate at model level.
You can specifiy your own metadata.
But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
Message was edited by: Benoit Le Nabec

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

An Unexpected Error while creating a new user...

Hello everyone.
          Recently a customer of ours received an error while creating a new user. I believe the page bombed out on him while he was creating the user and this is the error he received:
          ============================================================
          Error opening /error.jsp.
          The source of this error is javax.servlet.ServletException: Cannot find message resources under key org.apache.struts.action.MESSAGE at weblogic.servlet.jsp.PageContextImpl.handlePageException(PageContextImpl.java:323) at jsp_servlet.__error._jspService(error.jsp:17) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilter.java:246) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.wlw.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:120) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:533) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:408) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:106) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:512) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._kichler.__adminpagelayout._jspService(adminpagelayout.jsp:15) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:146) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:321) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:184) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:767) at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:135) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
          Caused by
          javax.servlet.jsp.JspException: Cannot find message resources under key org.apache.struts.action.MESSAGE at org.apache.struts.util.RequestUtils.retrieveMessageResources(RequestUtils.java:1103) at org.apache.struts.util.RequestUtils.message(RequestUtils.java:1043) at org.apache.struts.taglib.bean.MessageTag.doStartTag(MessageTag.java:294) at jsp_servlet.__error._jspService(error.jsp:14) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilter.java:246) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.wlw.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:120) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:533) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:408) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:106) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:512) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._kichler.__adminpagelayout._jspService(adminpagelayout.jsp:15) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:146) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:321) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:184) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:767) at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:135) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
          ==========================================================
          Here is the error that I have found in the logs.
          ==========================================================
          ####<Jan 26, 2006 10:49:40 AM EST> <Info> <Usermgmt> <clv1upw02> <DealerManaged2
          > <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <weblogic> <BEA1-1E
          26AFA61CCE> <BEA-402301> <User [email protected] was created with prof
          ileType null>
          ####<Jan 26, 2006 10:49:40 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
          yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
          sp.>
          ####<Jan 26, 2006 10:50:33 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '10' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
          yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
          sp.>
          ####<Jan 26, 2006 10:50:45 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '10' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
          yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
          sp.>
          ####<Jan 26, 2006 10:52:32 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '9' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsupply
          inc.com> <> <BEA-423137> <There was an error loading the requested URI /error.js
          p.>
          ####<Jan 26, 2006 10:52:53 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
          <ExecuteThread: '9' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsupply
          inc.com> <> <BEA-423137> <There was an error loading the requested URI /error.js
          p.>
          ==========================================================
          Now the weird thing is this. He got this error, and the user WAS STILL added to our user lists. This doesn't happen all the time, as in the logs he created a user minutes before this one and he did not receive any errors.
          This is just something that we do not want to have happen. Does anyone have any idea of what may have caused this and what I can do to prevent this from happening again.
          I cannot find any info on this BEA-423137 error anywhere on the site and I was wondering if someone would be able to help me out.
          Thanks,
          Garret

Nevermind everyone. I figured out that I can do a manual change and just add the user to one of the groups and everything should be ok. Something happened silently within the system that caused it.

Portal runtime error while creating users in portal content administrator

I am getting this error while creating new users in portal.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_admin_ws/com.sap.portal.user_management/com.sap.portal.createNewUser/com.sap.portal.createNewUser
Component Name : com.sap.portal.usermanagement.admin.CreateNewUser
com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z.
Exception id: 03:51_27/08/08_0028_7431850
See the details for the exception ID in the log file
any help is appreciated...

log file look something like
this
2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception in PortalRequestManager.dispatchRequest without timeout
[EXCEPTION]
#1#java.lang.NoSuchMethodError: com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z
     at com.sap.security.core.admin.util.checkEmail(util.java:110)
     at com.sap.security.core.admin.UserBean.checkFieldValidity(UserBean.java:695)
     at com.sap.security.core.admin.UserBean.checkUser(UserBean.java:591)
     at com.sap.security.core.admin.UserAdminLogic.performUserModify(UserAdminLogic.java:3226)
     at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:552)
     at com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent.doContent(UserAdminComponent.java:71)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
     at java.security.AccessController.doPrivileged(AccessController.java:241)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:758)
#1.5#001125A6576A008C00000015000550E2000455943BAE9D63#1219995051656#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#197794##irconepd_EPD_7431850#Administrator#f4d062d0759411ddb89b001125a6576a#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception ID:01:00_29/08/08_0043_7431850
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_admin_ws/com.sap.portal.user_management/com.sap.portal.userSearch/com.sap.portal.userSearch
Component class : com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent
User : Administrator
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
     at java.security.AccessController.doPrivileged(AccessController.java:241)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:758)
Caused by: java.lang.NoSuchMethodError: com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z
     at com.sap.security.core.admin.util.checkEmail(util.java:110)
     at com.sap.security.core.admin.UserBean.checkFieldValidity(UserBean.java:695)
     at com.sap.security.core.admin.UserBean.checkUser(UserBean.java:591)
     at com.sap.security.core.admin.UserAdminLogic.performUserModify(UserAdminLogic.java:3226)
     at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:552)
     at com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent.doContent(UserAdminComponent.java:71)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 7 more

User availabilty while creating a Property Category

Similar Messages

Maybe you are looking for