USER Cancelled message while navigating report.

Post Author: sreeraj_vinod
CA Forum: General
One of our clients are facing a peculiar problem. We have a VB 6 application with crystal report 9 reports assocaited to it. When the user generates a report which has a large amount of data, and he tries to navigate to the next page, he gets and message "User Cancelled". If it is sent to printer directly, it says "Error printing". This report has 3 small sub reports embeded into it.
Request you to let us know, what could be casing this issue.
Thanks in advance.
Sreeraj

Post Author: ygregersen
CA Forum: General
It's possible that one of the items in your scenario has a time out limit. When it goes beyond that limit the error message defaults to a 'user canceled' message. This happens in Access all the time because the queries in there default to 60 seconds - your scenario seems to be a similar issue. Maybe look for something about a time out limit.

Similar Messages

Roll=0.00 Em=20.95 Heap=0.00 [Mbyte] as message while running reports

This morning our reports are showing
>>> Roll=0.00 Em=20.95 Heap=0.00 [Mbyte]
in the message area while the reports are running. Own messages send to the bottom of the gui via message or via the gui progress indicator are shown for 0.5 seconds, then the above message overwrites evrything again. Where does this come from? For our users this is complete worthless.

Hi sapbasis sv,
Is there any recent support pack updation done in your system.
I believe this error has something to do with your existing SAPGUI patch.
BR
Prabhith

Can we show some user defined message while cube loading in OBIEE

Hi All,
Currently we are building OBIEE dashboards from Essbase ASO Cube as datasource.
During Essbase Cube loading ,Essbase will "Disable all Administrative Commands".In this mean time,When users are trying to run the dashboards,OBIEE will thorws severe error.
Can we dispaly some user defined message something like "Cube is loading.Please wait...." or any other alternative.
Time taken to load the cube is 1hr.Please suggest
Thanks,
SatyaB

Yes, You can better try replacing the whole OBIEE dashboard with a custom message. Whenver the load happens...you shud trigger or set a flag value to 'Y'. Using guided navigation when Flag value is matched to Y...right a JS to replace the whole dashboard.
[html]
[head]
[script type="text/javascript"]var strStatus="@1";
if(strStatus =='Y')
location.replace('saw.dll?PortalPages&_scid=in6lPJnWWNk&PortalPath=/shared/Framework/_portal/Cube%20Status%20&Page=Cube%20Status');
[script]
[head]
Replace square bracket with curly brackets in above replace code..
BTW, you shud mark the previous post on Implicit fact. Follow https://forums.oracle.com/forums/ann.jspa?annID=939

PI 7.1 RWB - find user cancelled message

hi,
simple question.
Where can i find the username of a cancelled message in the RWB (adapter engine monitor) ?
I can´t find the username in the audit log, message log or somewhere else.
The audit log is only showing the entry: Admin action: The message was successfully set to status failed.
I ´ve searched the nwa logs without success.
any ideas ?

Therefore please apply the patches recommended on the note below.
> 1401840 - User name in Audit Log entries for administrative actions
"Symptom
When a user performs administrative actions on XI messages of the
Adapter Engine, the user name is not included in the Audit Log entries.
It's afterwards impossible to determine the user who canceled or retried
an XI message."

Error messages while generating reports

I am using CR XI SP4 and i get the following message when generating reports:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt:
Unknown Database Connector Error---- Error code:-2147482942 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException (Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.t.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
In the RAS log file i see:
ErrorLog 2009 7 21 17:45:16.188 732 3648 (\servers\ras\dtsagent\cdtsagent.cpp:3113): CDTSagent::doOneRequest reqId=250: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:13209 ErrorCode:706 ErrorMsg:"Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt: Unknown Database Connector Error"
Any assistance would be appreciated
Thanks

hi,
You are able to login in to application, Means your authentication is working.
Open RPD in online mode and try to view data.
Check your connection pool setting in General tab.
Check you have selected appropriate Data Source Name, Call Interface.
Thanks,
Sainath Baludu.

How to provide custom messages while viewing reports in obiee.

Hi,
I would like to show some custom message in all Dashboards. For instance when a user logs into the Dashboard, the report would take long time to get processed. So what to do so that we could provide custom message stating that.."Please select the required parameters..." or something else.. After selecting the necessary prompts, he would get what he wants..Is there some option in OBIEE where we can place mentioned messages.Thanks in advance...
Regards,
Ajay

One thing
You set default value which is not a database value... like Select Prompt Value something like this...
You set this kind of text as default value for all dashboard prompts.
So, when you click first time dashboard, it runs but leads to get No Results.
Here you can select prompt values and can run reports..
Or else
see this..
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-selecting-reports-from-dashboard-prompts-and-guided-navigation-sections/
Use this logic and in writing SQL for prompt, write a custom message that you want to write and then the report name while doing union.
like (let's say your report name is: "Rgn Dlrs")
select case when 1=0 then Markets.region else 'Select Prompt values and Report' end from paint
union all
select case when 1=0 then Markets.region else 'Rgn Dlrs' end from paint
now implement the guided navigation for section and try....

Wrong message while running report in bex analyzer

Hi Experts,
I have created an authorization object based on compnay code. I use the option RSECADMIN => Analysis => Execute As, to test this authorization object. When I give incorrect company code value, it displays correct message that is 'No authorization'.
But when I test in bex analyzer for same report, with same incorrect company code value instead of showing 'No authorization' message, it shows 'No applicable data found' message. Is there anything wrong here?
How can I show the correct authorization message 'No authorization' in bex analyzer, when incorrect company code is supplied?
Thanks,
Purvang

Hi Pratap,
thanks for reply.
I also thought that way initially but then was skeptical of different message received while testing in RSECADMIN. If SAP is going to show 'No applicable data found' message then how will a user have any idea that actually he is not authorized for the supplied value of company code.
does anyone know if this is bug or is there any workaround to show right message i.e. no authorization.
Thanks,
Purvang
Edited by: Purvang on Oct 19, 2011 3:18 AM

Errro message while running report in Web I rich client

Hi,
I am using Web I rich client XI R3.1 version and generating the report based on stored procedure universe. After giving the parameter information and while trying to run the report am seeing the error message as follows:
An internal error occurred while calling 'answerprompts' API. (Error: ERR_WIS_30270)
I appreciate your inputs for resolving this issue.
Thanks,
Eswar

Hi,
I am not BOBJ Admin so I don't have on the top of my head that how to do but here two links which might help you.
[http://blog.mastering-sap-and-businessobjects.com/]
[http://www.forumtopics.com/busobj/viewtopic.php?p=165424]
Regards,
Bashir Awan

Error message while running reports. Reports are failing

Does anyone knows what could be the reason for this error messages. We are using BOXI R2 with IIS. We are getting this message on the boxi processing server not on web server.We are getting this on al the three clustered processing servers. This has started happening recently else it was working perfectly till now.
Thanks,
ErrorLog 2009 4 14 12:12:41.263 9680 10848 (.\dts\corbaclientrequestcommadapter.cpp:424): EXCEPTION: IDL:omg.org/CORBA/UNKNOWN:1.0: Corba client dropped connection prematurely. reqType=103 agentId="{69B8A766-F098-4B17-B81B-020B8973E75F};1624;"
ErrorLog 2009 4 14 12:17:32.316 9680 11956 (.\dts\corbaclientrequestcommadapter.cpp:419): CORBA communication failure: reason[error number WSAECONNRESET] minor[1330577409] reqType[128] agentId=["{69B8A766-F098-4B17-B81B-020B8973E75F};1620;"]
ErrorLog 2009 4 14 12:17:32.316 9680 12164 (.\dts\corbaclientrequestcommadapter.cpp:419): CORBA communication failure: reason[error number WSAECONNRESET] minor[1330577409] reqType[280] agentId=["{69B8A766-F098-4B17-B81B-020B8973E75F};1622;"]

We did multiple changes which I have mentioned in other thread. We used -port and -ns command line on each server. We have deifned CMS by IPAddress:6400 in command line.
It seems to have resolved this issue.. When we do IPCONFIG on the server then we see 2 NIC cards ( 2 IP address). It seems that BO was confused to which one to use. So we hard coded the values of the NIC card ( IP address) in the command line of CMS and on all services.
Thanks,

Error message while navigating from Dashboard to BI Publisher

Hi,
We have a environment setup as , Using Ebusiness application authentication for OBIEE and Bi publisher.
But when we navigate from OBIEE to BI Publisher we are facing an error as java exception:connection refused.
i had seen everything but the issue is not getting resolved.
Can any one please help me out with the issue and for more analysis if you need anything else please let me know.
Thanks.

Some formats that play in iTunes are not compatible with the 1st generation iPod shuffle, Aiff and Apple Lossless for instance. Apple Lossless is not supported on the 2nd generation shuffle: iPod shuffle: Compatible audio formats
I don't use a shuffle but it has a function that other iPods don't have, on-the-fly conversion, the option to "Convert higher bit rate songs to 128 kbps AAC". You should check this out, this should save you converting your lossless files in iTunes. You can find details on pages 12 and 13 of the manual: iPod shuffle User Guide
Quote: "If this option is selected, songs encoded in AIFF or Apple Lossless format are
converted to 128 kbps when transferred to iPod shuffle (the song files in iTunes aren’t
affected). Otherwise, iPod shuffle doesn’t play songs encoded in those formats"

Error message while navigating around AD

I'm running into this more and more as I navigate around AD. There isn't a pattern that I can see as to when it will pop up.
"We're sorry, Apple Discussions is temporarily unavailable. We'll be back soon.
Until then, please visit http://www.apple.com/support"
Sometimes on log in, sometimes when replying, sometimes when moving between posts in a thread, etc.
Any clues?
Mac OS 10.5.8, Firefox 3.6.13

Barbara Daniels1 wrote:
Sheesh, now I'm completely confused - I thought California was a bonafide state ???? This sounds like it's a separate country...
We WERE! (in 1846) We still use a modern version of the flag as our state flag.
https://secure.wikimedia.org/wikipedia/en/wiki/California_Republic
Unfortunately, its become a nanny state, thus I call it a "Peoples" republic.
Meanwhile, I haven't encountered the error message for the last few hours. Hopefully, they fixed whatever they were fixin'.

Error while Executing reports in Portal

Hello All,
We are facing the following Error message while running reports in Portal.
We have recently updated the EP Patch to 17.. since then we are facing the issue.
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
com/sap/portal/services/api/connectorgateway/IConnectorGatewayService
Log ID
001A4B0717C8005E0000014900002E07000498168CA315E3
While checking the KM Content, we are getting the following error:
Runtime Error
An exception occured while processing the request.
Additional information: com/sapportals/wcm/util/uri/RID
Exception ID = 7004f63e-daf3-2d10-689e-add88da33d97 Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:27_27/12/10_0014_49226950
Refer to the log file for details about this exception.

Hi Sneha,
Please check the default trace log file in NWA. Also verify that BI System and portal system should be same SP level.
If there is any mismatch in the SP level then issue might comes. So check SP level for Bi and Portal.
Regards, Arun Jaiswal

Bypass the error messages while opening the Web Analysis 9.3.1 Report

I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
Thanks

Karen,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot

Error while navigating from a report in OBIEE

I get the below error while navigating from one report to another report
Odbc driver returned an error (SQLExecDirectW).
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 16001] ODBC error state: 37000 code: 1101 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate a new page for database 'TEMPDB'
because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup
, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup..
[nQSError: 16015] SQL statement execution failed. (HY000).
Any inputs on this is highly appreciated.
Thanks,
Vasavi

Hi Vasavi,
There is no Temp space in Data base to run queries .Please contact your DBA to increase your db size
thanks,
saichand.v
Edited by: Saichand Varanasi on Jul 14, 2010 7:35 AM

Need User friendly message, when there is no data selected in report.

Hi,
Can we able to set user friendly message in place of system generated message in reports, while report generated with no data.
I am using OBIEE 11.1.1.3.0
Thanks,
Archie.

Hi,
Go to your Results tab, and then click on the icon "Edit Analysis Properties" and select "Display Custom Message" from the "No Results Setting" drop down. Here you can edit and have your own custom message.
Hope this Helps you.
Regards,
MuRam

USER Cancelled message while navigating report.

Similar Messages

Maybe you are looking for