User cann't view own photo in Lync 2013, but other people can see.

Dear Expert,
Please advise where to check for this case. We set AD profile with Pic file 96 x96. Pic shown in Office 2010 but not in Lync.
I cannot see my own pic in Lync.( Capture 1) . But other user can see me ( Capture 2).  All users in CMT faces same issue
Capture 1: from my Lync
cont.

Capture 2 from other user Lync – can see my picture.
My Lync setting.
cont.

Similar Messages

  • Firefox will not allow me to view my own domains. Other people can see them.How do I get access?

    Every since I got my new computer, running windows 7, firefox will not allow me to see my own domains. If I unplug Netgar and plug directly into the Wild Blue modem, I can see them with IE or Chrome - but still not with Firefox.
    My Old computer, running XP can see my domains via the Netgear router. Computers running Vista cannot
    GoDaddy is my host.

    Hi cor-el,
    Thanks for the reply. I tried those things with no result. Then I followed the link you sent and found something that MIGHT be the answer if I can find someone to show me how to "send a ping" and "define the subnetmask."
    I have no idea what a subnetmask is, let alone how to define it!
    But I do feel that the problem has some connection to the router. My old computer has one IP address, while the 3 that won't work all share a different one.
    It would really help if I spoke "compuetreze," but I don't.
    Thanks again,
    Marte

  • Lync 2013 client - Set people to "Blocked Contacts" relationship by default?

    We are in the process of implementing Lync Server 2013 (on-premises). We have already implemented one front end pool and one edge pool and successfully tested the basic functionality.  Now we are moving on to configuring the various policies based
    on our requirements. One requirement that has come late in the planning is to prevent people from receiving IMs unless they explicitly allow people to IM them and to have the ability to whitelist IMs from people on an individual basis.  This is a feature
    that was submitted as a requirement by way of our IT HelpDesk manager.
    From what I gather, this could be accomplished if someone had the ability to set the default to the "Blocked Contacts" relationship for everyone instead of "Colleagues".  In my research on how to set that as the default, I found
    a setting "ShowManagePrivacyRelationship" in Set-CsClientPolicy.  I created a new per-user client policy called "TEST" and applied it to myself.  Then I set ShowManagePrivacyRelationShip to $true via PowerShell on the TEST policy. 
    However, even hours after making the change and signing out and back into the Lync 2013 client, I still don't see any change in functionality or new options.
    Now, if I instead sign in with the Lync 2010 client, I can indeed see a "Manage Privacy Relationships" option in a drop-down near the right side of the client which takes me to a view where I can see and move "People in my company" and
    "People in domains connected to my company" pseudo-contacts from the "Colleagues" relationship to "Blocked Contacts" and this accomplishes exactly what we want to do.
    Where can I find the "Manage Privacy Relationship" setting in Lync 2013 client?  If there is no setting called that, how can I accomplish what I am trying to do using Lync 2013?
    I would rather not use the Lync 2010 client, as our HelpDesk technicians all use Windows 8.1 and Office 2013.

    David:
    Yes, I have all of those relationships categories in Lync 2013.  What I am missing is the ability to set the rest of the organization to
    Blocked Contacts by default.  I can do this with the Lync 2010 client using the same user login and the same Lync Server 2013 environment.
    The following image demonstrates the location of the Manage Privacy Relationships option I would like to leverage in Lync 2013.  The image is of the Lync 2010 client.
    https://www.dropbox.com/s/i0g83i9su9e5zox/Manage_Privacy_Relationships.png
    If I click that Manage Privacy Relationships option, I end up on the following screen.  Note that there is a
    People in my company object under Colleagues.
    https://www.dropbox.com/s/kkatgtoexea7evt/Default_Privacy_Relationships.png
    I am able to move that People in my company object to another relationship option.  I moved it to
    Blocked Contacts, as you can see below.
    https://www.dropbox.com/s/956kw0ih15uksgr/People_In_Company_Blocked.png
    As you can see in the following image, after making this change if I do not have a person on my Contacts list, they are unable to IM me.  As you can see in my Lync 2013 client relationships list, no one is in my
    Blocked Contacts list yet the Lync Test Account is being blocked due to the fact that I put People in my company there and haven't added them to my Contacts list.
    https://www.dropbox.com/s/cue09wjj8tidbau/Blocked.png
    After adding the Lync Test Account to my Contacts list, the Lync Test Account is able to IM me.
    https://www.dropbox.com/s/nalju5ia980lc30/Unblocked.png
    I hope these images help make clear that there seems to be a capability present in the Lync 2010 client that I am unable to locate in the Lync 2013 client.  I can't find this
    Manage Private Relationships option anywhere in the Lync 2013 client or any other option that lets me see those People in my company and People in domains connected with my company objects.
    With regards to the EnablePrivacyMode option, I am already aware of it and that is not what we are looking for.

  • How do I see other subscribers photos on a shared photo stream on iPad Air? I can see all people on Mac book pro, but not iPad Air.

    How do I see the other subscribers photos on a shared photo stream on iPad Air? I can see everyone on mac book pro, but not ipad. I can only see myself and the owner. Please help.
    thanks

    Hello there, missjanellez.
    The following link from the online iCloud Help menu provides some practical information in regards to shared stream functionality:
    Manage Subscribers to your shared streams.
    http://help.apple.com/icloud/#/mmc0cd7bfa
    On an iOS 7 device
    In the Photos app, tap Shared at the bottom of the screen, then tap Streams at the top of the screen.
    Tap the shared stream whose subscribers you want to manage, then tap People.The Activity stream doesn’t have subscribers.
    Do any of the following:
    To invite more people, tap Invite People, enter email addresses or tap the Add button to select from your contacts, then tap Add.
    To remove a subscriber, tap the subscriber, then tap Remove Subscriber.
    To choose whether subscribers can add photos and videos, tap Subscribers Can Post.
    If the subscriber list doesn’t include Invite People, you don’t own the shared stream.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • I cannot open a photo in my CS6 product.  I can see the photos on the bottom of my screen, but when

    I cannot open my photos in my CS6 product.  I can see the photos at the bottom of my sdcreen, but when I try to open one, I see the little blue circulating circle for about three seconds, then it changes to a plus sign, and nothing else happens. 

    Which Creative Suite 6 software title in specific are you referring too?

  • I've a MacBook, iPhoto 09, Kodak Easyshare camera. Importing photos working last wk, but today says can't import unrecognized format but it's jpg. Only change since last wk is I downloaded updates. Works fine if I attach camera to unupdated iMac

    I've a MacBook, iPhoto 09, Kodak Easyshare camera. Importing photos working last wk, but today says can't import unrecognized format but it's jpg. Only change since last wk is I downloaded updates. Works fine if I attach camera to unupdated iMac

    What update are you referring to?  If you do a search for "Kodak" in the iPhoto community you'll find numerous posts regarding problems with Kodak cameras. 
    So far there's no known fix.  The best workaround is to use a card reader with the memory card of the camera.
    OT

  • I would like to share my photo's titles and descriptions in the photo streams into which I place these carefully labeled photos. I do this so clients can see the names of the things they're swiping through. Is this even possible?

    I would like to share my photo's titles and descriptions in the photo streams into which I place these carefully labeled photos. I do this so clients can see the names of the things they're swiping through. Is this even possible?

    No.  Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
    OT

  • AA unable to transfer to Lync 2013, but only on User dial plans

    The current environment has two Lync 2013 standard edition servers.  Lync 2010 is still in existence, and both pools are connected to an Exchange 2010 SP2 UM server.
    UserA is part of the default Global dial plan in Lync and part of a UM dial plan named Global.  UserA has been moved to Lync 2013 pool.
    UserB is part of a user dial plan in Lync named UserDialPlan and a UM dial plan named UserDialPlan.  UserB has been moved to Lync 2013 pool.
    Both dial plans have their own route/pstn usage tied to their own sip trunk from Intelepeer.  Both UM dial plans have an AA identically configured with key mapping #1 tied to dial the 11 digit phone number of the user.  Both users can successfully
    be dialed directly via PSTN.
    If I call Global’s AA and press 1, the call is successfully connected and rings through to UserA.
    If I call UserDialPlan’s AA and press 1, I get “Sorry I couldn’t transfer you to the extension” and the UM server logs shows errors 1079 and 1136:
    1079 The VoIP platform encountered an exception Microsoft.Rtc.Signaling.OperationFailureException: Failed to transfer, successful refer notification not received
    1136 An error occurred while transferring a call to "15552735555". Additional information: The call transfer type is "Blind.", the transfer target is "phone number", and the caller
    ID is: "0ed8114d-a068-41be-9790-9342d0a02d7b".
    If I switch the ip address of our sip trunk back to the Lync 2010 mediation server and alter the Lync topology to connect that trunk back to the 2010 server, then these transfers start working again.  This goes for other
    user dial plans as well.  What I don’t understand is why the Global dial plan would work on 2013 and the user dial plans will not.  Refer is disabled on the trunk config (has been for
    over 2 years).  I assume if it was a general setting like that, the Global plan wouldn’t work either, but what is it that’s special about the Global plan vs. user plans?
    Any thoughts would be great, thanks!

    I have the same issue. I can actually transfer to extensions when it is speech enabled and I say the person's name. However if I try a key mapping to transfer to the same user using the Extention I get the same "Sorry I couldn't transfer you to the extension"
    An error occurred while transferring a call to "151". Additional information: The call transfer type is "Blind.", the transfer target is "phone number", and the caller ID is: "4813feae-2a10-4d33-9612-ee4bccf7c0f9". 
    The VoIP platform encountered an exception Microsoft.Rtc.Signaling.OperationFailureException: Failed to transfer, successful refer notification not received
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result, String operationId)
       at Microsoft.Rtc.Collaboration.Call.EndTransferCore(IAsyncResult result)
       at Microsoft.Rtc.Collaboration.AudioVideo.AudioVideoCall.EndTransfer(IAsyncResult result)
       at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.BlindTransferSessionState.Call_TransferCompleted(IAsyncResult r)
       at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.SubscriptionHelper.<>c__DisplayClass5f`1.<>c__DisplayClass62.<WrapCallback>b__5e()
       at Microsoft.Exchange.UM.UcmaPlatform.UcmaCallSession.<>c__DisplayClassd.<CatchAndFireOnError>b__9()
       Detected at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Signaling.OperationFailureException..ctor(String message)
       at Microsoft.Rtc.Collaboration.Call.CallTransferAsyncResult.Refer_StateChanged(Object sender, ReferStateChangedEventArgs e)
       at Microsoft.Rtc.Signaling.ReferStateChangedEventArgs.Microsoft.Rtc.Signaling.IWorkitem.Process()
       at Microsoft.Rtc.Signaling.WorkitemQueue.ProcessItems()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessing()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessingCallback(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    FailureReason = 0 during the call with ID "4813feae-2a10-4d33-9612-ee4bccf7c0f9". This exception occurred at the Microsoft Exchange Speech Engine VoIP platform during an event-based asynchronous operation submitted by the Unified Messaging server. The Unified
    Messaging server will attempt to recover from this exception. If this warning occurs frequently, contact Microsoft Product Support.

  • I lost an xcel doc. Tried to find the Library folder in Users not there when use Finder. But when trying to upload a photo, iphoto found the library folder I can see my doc in Office 2011 Autorecov, but can't access it! How do I get User to show Library

    I lost an xcel doc a couple of days ago. Tried to find the Library folder in Users but not there when I use Finder (even when I do shift-command-G). But when trying to upload a photo in iphoto I found the library folder in Users. I can see my doc in Office 2011 Autorecovery, but can't access it! How do I get User to show Library then I can get to my long lost document?

    The auto recovery dat should be in the Microsoft User Data folder in your documents folder, not in the Library. However, I Haven't had to look recently.

  • Unable to view all photos in version 8.1.2. Can only see last 18 month.

    Unable to view ALL photos in V 8.1.2  Only able to view past 18 months.

    Wild guess:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Move Users from OCS 2007 R2 to New Lync 2013

    I am trying to move users from OCS to Lync 2013 from within the Lync 2013 Control Panel and am getting an error that states "Cannot find Registrar pool. Verify that "FQDN of old pool" is a valid registrar pool.

    Give this Lync powershell command a go:
    Move-CsLegacyUser <user> -Target <Lync2013 Pool Name>
    Move-CsLegacyUser -Identity "Pilar Ackerman" -Target "atl-cs-001.litwareinc.com"
    Have you reviewed the OCS to 2013 migration documents?
    http://technet.microsoft.com/en-us/library/jj205375.aspx
    Did you add the OCS pool to the 2013 topology?
    Have you visited Lync News lately? All of the latest Lync news, articles, and tips collected in one giant aggregator. http://lyncne.ws

  • HT4759 My photo stream is on but i don't see any photos when i log onto icloud

    My photo stream is shown on my iphone and ipad but when i log into icloud on my pc i dont see photos as an option.

    Photo stream photos are not available on icloud.com.  If you want to view your photos on the web from a computer browser, you have to add them to a shared stream with the "public website" option enabled (see http://help.apple.com/icloud/#/mmc0cd7e99).  This will give you a private web to use and/or share with other for viewing them on the web.

  • Lync 2013 mobile client. Can't verify the certificate from the server. Please contact your support team

    We upgraded Lync Server 2010 to Lync 2013.
    Users are able to login on desktop clients but unable to connect on mobile client. We get following error message:
    Can't verify the certificate from the server.
    Please contact your support team

    Please check the Root CA is installed on your mobile device.
    Can you sign in externally?
    Please check you have updated the DNS records for Lync mobile autodiscover service.
    Lisa Zheng
    TechNet Community Support

  • Is there a way to overlay a photo onto an existing movie so you can see both at the same time?

    I'm trying to create an effect, which I'm sure can be done, which at various points of a 3 minute movie, i can overlay still photos  where you can see the photo overplayed onto the movie at the same time.  What technique is used?

    marks
    What version of Premiere Elements on what computer operating system?
    Assuming Premiere Elements 11, 12, or 13 Windows details...
    Supplemental contribution to your question...
    Please review and consider the merits of using a PiPs preset (Picture in Picture)
    These are presets found under fx Effects/Presets/25% or 40% category). They come in static version as well as spin in and other motion versions.
    Adobe Premiere Elements Help | Creating a picture-in-picture overlay
    ATR

  • I subscribed to a photo stream in iPhoto but I'm not seeing any photos

    I'm using iPhoto 9.6 on a Macbook using Yosemite.  Someone shared a photostream with me.  I subscribed (using Yosemite) without any errors but I'm not seeing any photos.  I've confirmed with the person who created the photostream that there are photos in it (I've seen them first hand).  I've had this issue before on Mavericks so .  Anyone seen this before?  Any idea how to solve?

    Not occurring for me, but you could try this:
    This solved my question by adamnash on Oct 19, 2014 6:52 PM
    Solution:
    I took a brute force approach:
    - I quit iPhoto
    - I launched Settings, went to iCloud, turned off Photo
    - I launched iPhoto
    - I verified that iCloud was off
    - I quit iPhoto
    - I went back to Settings, went to iCloud, turned on Photo
    - I launched iPhoto
    It's now synching all the albums, although the one I published while in this broken case seems to have now disappeared.

Maybe you are looking for