User cant mount USBstick
Hi,
I have tried find my answere in the wiki but failed.
Installed Arch with Gnome.
When insering a usbstik i can see it (monitoring tail -f /var/log/messages)
But then I get an error Unable to mount NAMEOFDEVICE, Not Authorized.
Must I add the user to a group? tried storage, hal, disk but did'nt work!
Suggestions?
Try https://wiki.archlinux.org/index.php/GN … n_Nautilus
Have you tried https://wiki.archlinux.org/index.php/Udiskie or pmount?
Last edited by karol (2011-01-29 16:23:01)
Similar Messages
-
I am experiencing problem with our v480 server, as ocasionally it fails to boot and gives cant mount /var error and goes into single user mode. (Log file is attached below). Once this happens, it doesnt come back into runlevel 3 until it is completely powered off and on.
I fixed the (ufs log for / changed state to Error ) message by removing the patch 113073-14 and making / as nologging in /etc/vfstab file. But the problem with not mounting /var still comes up. I am attaching the log file below with the ufslog error message included (which doesnt show up after patch removal).
I am looking for any suggestions or hints, what would be causing this. Thanks a lot.
Sun Fire 480R, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.0, 4096 MB memory installed, Serial ##
Creating CPU memory layout properties.
Initializing 1MB of memory at addr a0ffb92000 - Initializing 12MB of memory at addr a0ff002000 - Initializing 16MB of memory at addr a0fe002000 - Initializing 4064MB of memory at addr a000000000 \ | / - \ | / - Reading temperature limits from FRUPROMs: CPU0/2 BACKPLANE
Environmental monitor is ON
Rebooting with command: boot
Boot device: disk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Sun-Fire-480R/ufsboot
Loading: /platform/sun4u/ufsboot
| / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ SunOS Release 5.9 Version Generic_117171-12 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
| / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <0>
Can't find clone devinfo node
jnic146x0: Hba: JNI,FCR Model: FCE-6460-N
jnic146x0: FCode: Version 3.9 [3505]
jnic146x0: IRQ: 1 Channel: 1
jnic146x0: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
jnic146x0: WWNN: 100000017301494A WWPN: 200000017301494A
jnic146x0: Auto-negotiating link speed
jnic146x0: Configured as Fabric port
jnic146x0: JNIC v5.2.1.HIT.M05 (03082100)
jnic146x0: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
jnic146x0: Link Up: 2Gig
jnic146x0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
jnic146x0: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
jnic146x0: Network Port FFFC01 (WWN 100000051E341635:20FD00051E341635) available.
WARNING: Cannot create minor node for <JNI,FCR> <jnic146x> <1>
Can't find clone devinfo node
jnic146x1: Hba: JNI,FCR Model: FCE-6460-N
jnic146x1: FCode: Version 3.9 [3505]
jnic146x1: IRQ: 1 Channel: 1
jnic146x1: SubVend: 1242 Sub: 6460 Rev: 100 Vend: 1242 Dev: 1460
jnic146x1: WWNN: 10000001730146A9 WWPN: 20000001730146A9
jnic146x1: Auto-negotiating link speed
jnic146x1: Configured as Fabric port
jnic146x1: JNIC v5.2.1.HIT.M05 (03082100)
jnic146x1: Copyright(c) 1995-2003 JNI Corp, All Rights Reserved.
jnic146x1: Link Up: 2Gig
jnic146x1: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
jnic146x1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
jnic146x1: Network Port FFFC01 (WWN 100000051E344E7D:20FD00051E344E7D) available.
jnic146x0: Target0: Port 010200 (WWN 50060E80004417B1:50060E80004417B1) online.
jnic146x0: Target1: Port 010600 (WWN 50060E80004417B3:50060E80004417B3) online.
jnic146x1: Target0: Port 010200 (WWN 50060E80004417B0:50060E80004417B0) online.
jnic146x1: Target1: Port 010600 (WWN 50060E80004417B2:50060E80004417B2) online.
jnic146x0: Target0: Lun0 present.
jnic146x1: Target0: Lun0 present.
jnic146x0: Target0: Lun1 present.
jnic146x1: Target0: Lun1 present.
jnic146x0: Target0: Lun2 present.
jnic146x1: Target0: Lun2 present.
jnic146x0: Target0: Lun3 present.
jnic146x1: Target0: Lun3 present.
jnic146x0: Target0: Lun4 present.
jnic146x1: Target0: Lun4 present.
jnic146x0: Target1: Lun0 present.
jnic146x1: Target1: Lun0 present.
jnic146x0: Target1: Lun1 present.
jnic146x1: Target1: Lun1 present.
jnic146x0: Target1: Lun2 present.
jnic146x1: Target1: Lun2 present.
jnic146x0: Target1: Lun3 present.
jnic146x1: Target1: Lun3 present.
jnic146x0: Target1: Lun4 present.
jnic146x1: Target1: Lun4 present.
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run fsck(1M)
VxVM sysboot INFO V-5-2-3390 Starting restore daemon...
VxVM sysboot INFO V-5-2-3409 starting in boot mode...
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
NOTICE: VxVM vxdmp V-5-0-34 added disk array D6001A6B, datype = HDS9500V
configuring IPv4 interfaces: ce0 ce1.
Hostname: beta23
VxVM INFO V-5-2-3247 starting special volumes ( swapvol rootvol usr var opt )...
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
mount: /dev/vx/dsk/bootdg/var is already mounted, /var is busy,
or the allowable number of mount points has been exceeded
mount: mount-point /var/run does not exist.
VxVM vxvm-startup2 INFO V-5-2-503 VxVM general startup...
Dec 13 22:09:04 vxvm:vxconfigd: V-5-1-1589 enable failed: Error in disk group configuration copies
Dec 13 22:09:04 vxvm:vxconfigd: Database file not found; transactions are disabled.
VxVM vxvm-startup2 ERROR V-5-2-3656 Vold is not enabled for transactions
No volumes started
INIT: Cannot create /var/adm/utmpx
INIT: failed write of utmpx entry:" "
INIT: failed write of utmpx entry:" "
INIT: SINGLE USER MODEThank you so much for your response.
This error doesnt occur in all boots, but once it occurs , we have to power off the machine and power back on and machine boots normally into run level 3 without this /var error. otherwise a simple reboot doesnt help and we get the same error.
Here is the /etc/vfstab file, may be you can suggest further.
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/vx/dsk/bootdg/swapvol - - swap - no -
/dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no nologging
/dev/vx/dsk/bootdg/usr /dev/vx/rdsk/bootdg/usr /usr ufs 1 no -
/dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no -
/dev/vx/dsk/bootdg/opt /dev/vx/rdsk/bootdg/opt /opt ufs 2 yes -
swap - /tmp tmpfs - yes -
#/dev/odm added for support of Oracle access to VxFS
/dev/odm - /dev/odm odm - no -
#NOTE: volume rootvol (/) encapsulated partition c0t0d0s0
#NOTE: volume swapvol (swap) encapsulated partition c0t0d0s1
#NOTE: volume usr (/usr) encapsulated partition c0t0d0s3
#NOTE: volume var (/var) encapsulated partition c0t0d0s4
#NOTE: volume opt (/opt) encapsulated partition c0t0d0s5
/dev/vx/dsk/dxdbdg/u01 /dev/vx/rdsk/dxdbdg/u01 /u01 vxfs - yes suid
/dev/vx/dsk/dxdbdg/u02 /dev/vx/rdsk/dxdbdg/u02 /u02 vxfs - yes suid
/dev/vx/dsk/dxdbdg/u04 /dev/vx/rdsk/dxdbdg/u04 /u04 vxfs - yes suid
/dev/vx/dsk/dxdbdg/u05 /dev/vx/rdsk/dxdbdg/u05 /u05 vxfs - yes suid
/dev/vx/dsk/dxdbdg/u06 /dev/vx/rdsk/dxdbdg/u06 /u06 vxfs - yes suid
Thanks again -
How to allow users to mount a Samba shares on a WXP
Through lots of reading I've managed to get an understanding of how to mount SMB shares at bootup by placing the proper edits in /etc/fstab. While having the shares of the server, running Contribs.org SME Server 6.01 (recently known as Mitel SME Server) and acting as a samba server, being mounted at startup is perfect since the server is always on. This is not the best idea for the XP workstation since it isn't always on. Here is a copy of my present fstab file with x's replacing the passwords.
fstab [B---] 0 L:[ 1+19 20/ 21] *(1085/1086b)= . 10 0x0A
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /proc proc defaults 0 0
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
sysfs /sys sysfs defaults 0 0
usbdevfs /proc/bus/usb usbdevfs defaults 0 0
/dev/cdroms/cdrom0 /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/cdroms/cdrom0 /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/floppy/0 /mnt/fl vfat user,noauto,unhide 0 0
//192.168.2.2/stuff /mnt/silicon2 smbfs username=kingnubian,password=xxxxxxx,user
//192.168.2.105/e-smith /mnt/silicon1 smbfs username=kingnubian,password=xxxxxxx,users,noauto
/dev/discs/disc0/part5 swap swap defaults 0 0
/dev/discs/disc0/part1 / xfs defaults 0 1
I would like users with an account on the Linux box to mount the remote share on the XP box without needing to SU and consequently need the root password. When trying now to mount "e-smith" (The share on the XP box) as a user using "mount /mnt/silicon1" I get a message about needing to be SU.To allow users to mount smb shares you need to make smbmnt suid:
# chmod +s /usr/bin/smbmnt
Note however that the user needs to own the directory used as mountpoint. So I don't know how to make 'mount /mnt/silicon1' in your setup work for all users.
For the users to be able to unmount the smb shares as well you need:
# chmod +s /usr/bin/smbumount
Now users can do 'smbmount //server/share mountpoint -o username=whatever' or simply 'mount mountpoint' if the details are specified in fstab. To unmount root can do 'umount mountpoint' or users can do 'smbumount mountpoint'.
Don't confuse smbmount with smbmnt - the first is the command you use to mount shares manually, the second is the one that should be suid and is used both by smbmount and by mount -t smb.
Hope this helps.
-bogomipz -
Cant mount ntfs drive in os x 10.8.4
I've tried with several drives and bought software but still cant mount a pc hdd.
Needed strongly to work.NTFS is a windows format, not Mac. You will have to reformat it to ExFat on a PC or use software such as this:
http://www.paragon-software.com/home/ntfs-mac/
Ciao.
Note that these are recommendations for use as an external HDD.
Message was edited by: OGELTHORPE -
Selection screen default value maintain,user cant chage the default value
hi Friends
SELECTION-SCREEN BEGIN OF BLOCK SCLDBLOCK WITH FRAME.
SELECT-OPTIONS: S_WERKS FOR EBAN-WERKS DEFAULT 'IN01' NO INTERVALS NO-EXTENSION ,
S_MATNR FOR EBAN-MATNR,
S_BANFN FOR EBAN-BANFN,
S_EBELN FOR EBAN-EBELN,
S_LIFNR FOR EBAN-LIFNR,
S_BSART FOR EKKO-BSART DEFAULT 'IN03' OBLIGATORY NO INTERVALS NO-EXTENSION,
S_EINDT FOR EKET-EINDT OBLIGATORY.
SELECTION-SCREEN END OF BLOCK SCLDBLOCK.
here i need to maintain bsart in03 ,user cant able to chage anything instead of in03.what can i do for that one
Regards
dsHI,
REPORT ZETA LINE-SIZE 350.
TABLES : EBAN , EKKO,EKET.
SELECTION-SCREEN BEGIN OF BLOCK SCLDBLOCK WITH FRAME.
SELECT-OPTIONS: S_WERKS FOR EBAN-WERKS DEFAULT 'IN01' NO INTERVALS
NO-EXTENSION ,
S_MATNR FOR EBAN-MATNR,
S_BANFN FOR EBAN-BANFN,
S_EBELN FOR EBAN-EBELN,
S_LIFNR FOR EBAN-LIFNR,
S_BSART FOR EKKO-BSART DEFAULT 'IN03' OBLIGATORY NO INTERVALS
NO-EXTENSION,
S_EINDT FOR EKET-EINDT OBLIGATORY.
SELECTION-SCREEN END OF BLOCK SCLDBLOCK.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'S_BSART-LOW'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'S_BSART-HIGH'.
SCREEN-INPUT = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP. -
ISE and AD.. Users Cant login with domain credentials after changing password
Hello guys,
I have ISE 1.2 running in a live environment. I have a problem that users cant login after password has expired and changed. i have enabled password change under AD settings and have also checked the allow password change in the allowed protocols settings for PEAP with retries set to 3.
thanks for any help i can get in resolving this issue.You have the option to allow guests to change password in the portal settings?
-
Exchange 2013 Sp1 some users cant access owa
After I install new exchange 2013 with sp1 on windows 2012 R2 server one for mail boxes and the second Client Access, i move all mail boxes to it, then i uninstall the old server (exchange 213 with cu3).
All may exchange server’s virtual machines on hyper-v 2012R2
I install certificate and configure virtual directories
I notice some users can’t open there mail boxes from OWA they get a blank page after the enter username and password (from internal and external) (the same users can open outlook anywhere) at the same times many users can access owa.
After many restarts they can access OWA.
After some days some other users can’t access owa.
I remove ECP and OWA virtual directories, Then Recreate and configure it.
But the same problem some users cant access owa
I install a new client access server, configure it
But the same problemHI
YOu can check below things to resolve the problem
Disable SSL from Default Web Site if you have enabled them
Check if you have set any redirection in the Default Website if so remove redirection and see the results
Ensure that you have a valid certificate for owa VD
check correctly the authentication type - windows authentication is enabled or if you have form based authentication enabled
Below is an example for enabling WA
set-Owavirtualdirectory -identity "servername\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
Set-EcpVirtualDirectory -Identity "servername\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you -
Cant mount /dev/sda2 /mnt
hello,everybody
I'm a beginner
I want to install ArchLinux in my Dell notebook ,the sda1 had installed window xp,i want to make a dual system .
I burn a Arch Linux ISO cd and enter the live system,then the questions are coming....
After partitioning the drive by cfdisk tool,i cant mount the sda2 on the /mnt
the error code list this :
SQUASHFS error: Cant find a SQUASHFS superblock on sda2
EXT4-fs(sda2) : cant find ext4 filesystem
What's meaning ? I have partition the drive like this .Please other Linuxer help me or tell me how to solve this problem
cfdisk
name flags partType fsType size(MB)
sda1 Primary ntfs 30000
sda2 Boot Primary Linux 100
sda3 Primary Linux 10000
sda5 Logical Linux swap 2000
sda6 Logical Linux 70000After you partitioned the drive, did you put filesystems on the partitions? Follow the steps in the Beginners' Guide, and use mkfs to put filesystems on the partitions. If sda2 is your boot partition, it's not the partition you want to mount at /mnt (you should mount your root partition there). Read the Guide.
https://wiki.archlinux.org/index.php/Beginners'_Guide
Last edited by 2ManyDogs (2012-12-16 04:48:46) -
Hi, i was surprised when i figured out that i cannont mount my cdrom.
I have 2 DVD trays. I cant mount cd's in one of them. But in the other i get this:
org.freedesktop.hal.storage.mount-removable no <-- (action, result).
I did some chmod there and i got this error:
(exo-mount:5520): Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «ubuntulooks»,
(exo-mount:5520): Gtk-WARNING **: Imposible encontrar el motor de temas en la ruta al _modulo: «crux-engine»,
org.freedesktop.hal.storage.mount-removable no <-- (action, result)
For the one who doesnt speak spanish, the traslation will be:
(exo-mount:5520): Gtk-WARNING **: Cannot find theme at al _module: «ubuntulooks»,
(exo-mount:5520): Gtk-WARNING **: Cannot find theme at al _module: «crux-engine»,
org.freedesktop.hal.storage.mount-removable no <-- (action, result)
I googled this, but all that i found was "chmod a+rwx /dev/cdrom0.. " and things like that, but still dont workhttp://forums.opensuse.org/archives/sls … ost1801686
You could also try with http://aur.archlinux.org/packages.php?ID=26195 which does the job without the whole policykit mess. -
IPhone 5 broke switched to old iPhone 4 but cant receive texts from other iPhone users cant do anything with iPhone 5 screen does not work
I'm guessing that you turned off the iPhone 5? If so, then are you using the same phone number as the 5? You need to go into Settings>Messages>make sure that iMessage is turned on and activated. Then go the Send & Receive and find out if your current number is checked.
-
Fstab: Allowing users to mount DVD-Rom - how?
Hello ... a silly question i know ...
i had following in my fstab (generated by Archinux install)
/dev/cdroms/cdrom0 /mnt/dvd udf ro,user,noauto,unhide 0 0
But i cannot mount the dvd as user i get following error message:
mount: only root can mount /dev/cdroms/cdrom0 on /mnt/dvd
I thought the options "user" allows all users to mount it?
CU ActionNewswhen i try this as user i get following:
mount /dev/cdroms/cdrom0
/dev/cdroms/cdrom0: Input/output error
mount: I could not determine the filesystem type, and none was specified
EDIT: oh sorry audio-cds cannot be mounted . with a dvd-rom it works .
Thanks.
CU ActionNews -
Users cant connect??
Hello,
For some reason user cant connect to the DB. some say the are using idap and not tnsnames.ora file. But for some odd reason the idap and the sqlnet.ora file were missing in my $ORACLE_HOME/network/admin location. So i copyed some other server file into here. here are the files.
# SQLNET.ORA Network Configuration File: /u01/oracle/9.2.0/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
#NAMES.DEFAULT_DOMAIN = xxx.xxxxx.net
#SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP,TNSNAMES,ONAMES)
#NAMES.DIRECOTY_PATH= (TNSNAMES)
and here is the idap file
# LDAP.ORA Network Configuration File: c:\orant\92\network\admin\ldap.ora
# Generated by Oracle configuration tools.
DEFAULT_ADMIN_CONTEXT = "dc=world"
DIRECTORY_SERVERS= (oidldap:389:636)
DIRECTORY_SERVER_TYPE = OID
this is 10g on AIX. As metion i have moved these files from a different server into this box. What is wrong and why cant user connect ???Hi,
I think both sqlnet.ora and ldap.ora are in different OS.
/u01/oracle/9.2.0/network/admin/sqlnet.ora
c:\orant\92\network\admin\ldap.oraI hope listener,ora and tnsnames,ora files are in any one of the OS.
Regards
Jafar -
Single User Mode - mount external drive and make it r/w
How can I access a USB disk and make it read/write?
I can't +mount -uw /Volumes/"Time Machine Backups"+ because it says that the disk is a special type.
Can I just use chmod because the disk is automounted?
When I attempt to chmod my USB disk, I get this message:
chmod: /Volumes/Time Machine Backups: Read-only file system
chmod: /Volumes/Time Machine Backups/.autodiskmounted: Read-only file system
I know that I can cp from the internal disk, since I can cat the pictures to the terminal. But I can't make the external hard disk writeable.
I need to do this from single user mode, because the machine won't boot from the DVD.
-MichaelJust got back from the apple store. The genius found these things:
* My DVD is fine. It loaded in another computer
* My computer is mostly fine, except for the hard disk. It was able to boot off of an external Firewire disk.
* The DVD drive is fine. When the computer was booted off the external disk, it was able to mount my DVD.
* The internal HD is definitely bad. Drag/drop copy to an external HD was going to take 3 hours for about 30 files. Disk Utility shows it in red.
* He suspects that the failing HD prevented the machine from being able to load a DVD. (?)
His advice:
1 Buy a new 2.5" SATA disk at Frys.
2 Buy a USB sled for the old disk
3 Replace the failing HD in the laptop with the new, unformatted disk
4 Boot from the OS X DVD
5 Install the OS from the DVD
6 Reboot from the internal HD
7 Insert the failing HD in the sled, and connect it to the computer once it's booted off the new HD. Copy everything from the /users directory
8 But a new HD for the sled and use it for Time Machine backups
9 Teach the daughter the importance of regular backups
Let's hope this works. -
Trying to share library across 2 user, cant edit info on users though?
Ok, I have followed instructions to allow all users on my Mac to share the one iTunes music folder. I put the iTunes folder in the HD>Shared>Music folder.
I then added the library to the other use, and can see the music ok. However I click on get info to edit a song, and it wont let me change any info. I've checked the permission on the folder and it says user xx(me) has read and write access.
So why cant I edit it please?
Also this is what Im trying to do ultimately, add a song in either user and then who ever is logged on, can add a song and all users will see it in the iTunes library, also any changes (if I can get it too work!!) to the file info, album art etc, I want changed so all users get this update.
*update* just tried to add an album under my non admin account, and it said cant as dont have write access. But according to the info on the folder (click>get info) it shws (me) to have read and write access.
ive done a repair permissions if that was some issue, please please help
Please help, Im brand new to iMac (Xmas pressie) and always been a Windows user so be gentle!!
thanks
LocHi Loc..
I share my music over 3 Macs..with 4 accounts on each, one for each member of the family..as long as all the itunes are open and they are all set to 'sharing' then everybody can see and play any music on any account on any mac, it shows up as 'shared music' in you itunes sidebar. If my son downloads or imports an album or a cd into his itunes then anyone can play it.
I've tried to keep all the music on the 20" dualcore which frees up memory on the G5 and ibook...it seams to work quite well.
Did a similar thing with iphoto and that works ok, only problem I have had with both setups is Leopards glitchy networking but i'm hoping that will settle down in time, it's still a bit new, I should have waited till 10.5.3 at least...but christmas got in the way..
Hope this helps
Chris.... -
[SOLVED]Creative Zen V - libmtp regular user cant access
Anyone know how to configure libmtp so that a regular user (not root) can access the device? I have searched the forum/wiki but didnt find anything usefull.
When I run mtp-detect as root it prints alot of info about the device, so I guess its working correctly. Same command as non-root user gives
[fester]$ mtp-detect
Found non-autodetected device "Creative Zen V" on USB bus...
usb_claim_interface(): Operation not permitted
Connection error.
No devices.
[fester]$
Cant access through amarok either as non-root user.
Thanks for any help I get!:DLOL...solved it myself :oops:
And incase someone else runs into the same problems, heres how I solved it...
Make sure you have libmtp installed "pacman -Q libmtp". Add the udev rule one post above and reboot. Plug in player. Start amarok, then go to Settings->Configure Amarok->Media Devices, click Add Device. Choose MTP Media Device from the pulldown menu, give it a name and click OK. Then click Apply then OK. Amarok should now detect the device and you will be able to add files to the player.
I was clicking Autodetect Device and thats why it wasnt working.... Now I love linux again
Maybe you are looking for
-
I have been having troubles with iTunes in general and it telling me it can't find my files(by showing an exclaimation point)although they play just fine. Now, when I try to download episodes of new podcasts, the file has an exclaimation point next t
-
Source monitor and program monitor boxes will not display video in full only half
I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half. So the top half of both monitors are black and the bottom half is where the video displays. But you can see that the video is missi
-
Option Change Prit out put in QA03
Hi all, I want to change standard print out of "Inspection Instruction " to a custom smart form is it is possible to add a button in QA03 screen to call this smart form or any other method to call a smart from. from this screen Regards Nausal
-
ORA-27102: out of memory SVR4 Error: 12: Not enough space
We got image copy of one of production server that runs on Solaris 9 and our SA guys restored and handed over to us (DBAs). There is only one database running on source server. I have to up the database on the new server. while startup the database I
-
Creating Packages Recource Name Question
I am trying to create a package combining the data grim a LightSwitch control. I have the following code in my application folder. but I don't know what to put in for the string ResourceName. I am trying to add this data to the excel Zip file in a wa