User Concern Problems with BEx

Hi to all,
Can you please share some of <b>User Concern issues with BEx</b> and the <u>Solution</u> for those.
Thanks in advance.

check sap note 1007360 and the related notes. also check sap note 1089582
we are getting odd results in very simple formula and also some rows in a query have no data when it should.

Similar Messages

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

IP - Various problems with BEX Analyser - help would be nice

Hi,
we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below:
1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is outside the query when clicking on the button, it is executed once (like it should).
2) Locking: we don't have locking problems, but from the moment two people lock each other once, they need to close their analyser and re-open it (so logon again) in order to be able to start planning again in a non-locked part. If they just change their selection (to the not-lock part) they remain locked!!!
3) planning function with multiple variables: system cannot retrieve values of all variables.
details of function:
CMD                                               1       EXECUTE_PLANNING_FUNCTION
PLANNING FUNCTION NAME           1      AG10_COPY01
DATA PROVIDER_FILTER                 1     DATA_PROVIDER_1
VAR_NAME                                     1       PROF_CTR
VAR_VALUE                                    1       510
VAR_NAME                                     2     PERIOD
VAR_VALUE                                    2        012
VAR_NAME                                     3       CUSTOMER
VAR_VALUE                                    3     1000
-> following the instruction of the SAP course, in case of multiplle variables they should start from 0 and have an incremental increase. But the system only recognizes the variable with index = 1
regards
D

Dear Dries,
could it be that the variable type you use require a different set of commands?
In general the parameters of the BEx Analyzer follow the rules of the SAp BW 3.5 Webruntime. When reading this detailed documentation you find that depending on the type of variable other names have to be used, e.g. when using a selection option variable you need something line varname_low, varname_high, ...
The documentation can be found in the online-help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm</a>
Best regards, Olaf Fischer

Problem with BEx Analyzer

Hi,
I have a problem with the Bex Analyzer. It is showing th details in German Language and i am not able to do anything on it.
Can anyone help me in this issue.

Dear Tinkugeo,
I also faced same problem, but i Installed latest patch so i got solved my problem.
But if you are running Office 2003 then you required patch from Microsoft. that is related to frame work.
Hope this information will help you.
Thanks
Kiran Patel
SAP BI Consultant
TCS-Ahmedabad

Chrome (Windows NT 6.1 6.2) users reporting problems with loading and mouseevents - any insights?

For several years now, I have created simple studies (I do psychological stuff) to run online, recruiting participants through Amazon Mechanical Turk (AMT). I have had no problems until recently (last 6 to 9 months). Now, some AMT users are reporting problems with stimuli loading or buttons not responding immediately when clicked (e.g., advancing to a new screen). What is common amongst all the users experiencing problems is that they use Chrome, and they also tend to be Windows NT 6.1 or 6.2 users running Flash Player 12.0. But not a single Firefox, Safari, or MSE user has ever reported an issue. I'm just looking for help in troubleshooting this problem. Again, the studies I run are incredibly simple (e.g., no videos being loaded from server, etc.), mostly word presentation where I record time and x,y coordinates of mouse movements as they respond to questions. Would attempting to publish for another target version of Flash Player help? The default setting is to publish the .swf and .html wrapper for Flash Player version 11.7. Any ideas? I also use version 13.0.1 of Flash Professional CC to create my studies if it helps.

This is helpful. Thanks. So it would be to my advantage to play around with something like SWFObject 2?
http://www.adobe.com/mena_fr/devnet/flashplayer/articles/swfobject.html
Or is there something else you would recommend?
What I've been doing is a far cry from actual web development, but quite interested in learning more. This swfobject seems to get at what you are suggesting (I think).

Intel iMac 20' users - any problems with noise on your firewire interfaces?

Someone please tell me that they have a quiet intel iMac 20'/Firewire interface set up, I'm having problems with a lot of digital noise from my Saffire LE & badly am hoping it's 'fixable' or just a faulty unit but more so, praying it's not noise from the iMacs Power supply that will interfere with any firewire interface I get???
I've read many posts about G5's suffering from noisy psu's which was one factor in my choosing an intel iMac & I chose the Saffire on it's great reviews for sound quality, there's no way I can work with the noise I'm getting & I'm pretty much panicking that if it IS the iMac & firewire thats the problem I'll be screwed as i only have 6 pin firewire as a useable option (really don't want to use usb2)
Incidentally, the 'budget' set up I had previously (PC & soundblaster audigy) didnt suffer from any noise like this (at least not that was even audible with the mixer levels at conversational level!) which i guess rules out any blame of this on 'mains hum/interference'?
The noise is there with the saffire's monitor output knob at any setting & with no inputs connected, it;s even worse if i power the saffire with it's external psu instead of off buss power. I'm not using a firewire hub & I've tried switching firewire leads & removing the firewire hard drive i have in the other port in case this was affecting it.
Would really appreciate hearing from anyone with similar troubles or even better anyone thats NOT having this problem with a 20' intel iMac & firewire interface so at least i know there's light (& quiet!) at the end of the tunnel
Adam
Intel iMac 20' Mac OS X (10.4.7)

funnily enough I'm going the other way, I have a rack of external modules/>sampler/fx etc & a crate of looms I've just unplugged as they've not been >turned on in so long!!!
I hear you there!
The noise is there without any inputs at all to the interface, its defiantely >digital though, its like a toned version of the sound of an old telephone >modem.
What I mean, is try disconnecting everything, drives and all. You might even disconnect the interface and crank up the iMacs volume to see if it is there. If it is, you can try the UPS and see if that takes care of it. Then add them in one at a time. All it takes is one cheap power brick in the mix to cause all kinds of trouble (if your using powered monitors, that brick too). Noisy components can actually send noise back into the source power.
I know it can be really frustrating, especially if you have noise coming from more that one source. The key is to strip everything until it is quiet and then add them back in to see where the worst is. Then come up with a plan to try to get rid of the noise.

OID users ( EUS) problem with grant create table with admin

Hi,
We activated enterprise users in the OID.
There is a role APP_ADMIN that has the following grants:
create user
drop user
create table with admin option
this is for an application that creates BI schemas, so it needs to be able to create other users.
I have granted these to a local role, and the user has access to the local role, thanks to the OID setup.
The create and drop user work.
however, the grant create table to another user does not work.
Is there an issue with 'with admin option' grants in Enterprise user security?
Regards,
Peter

If I grant
grant create table to test_role with admin option;
it does not work
if I grant
GRANT GRANT ANY PRIVILEGE to test_role WITH ADMIN OPTION;
it does work.
The test command as user with test_role is:
grant create table to test_usr;
very strange!
If the user is a standard user and I create role test_role
and grant create table to test_role with admin option it works.
but if I convert the user to an EUS user and the same privilege is given to the role ( role is granted to a global role to an enterprise role)
it doesnt work
Edited by: Peter on Dec 7, 2012 2:36 PM

For users having problems with Mail functionality...

Hello! I have been having problems with Mail functionality as well, so, I took a few steps to see if I could solve the problem on my own.
My problems were:
Mail would freeze when sending mail, or, when I pressed quit, it would freeze.
If I toggled between inboxes too much it would freeze up.
Even after trying the many techniques others offered on this board, Mail still froze up. So.. here's what I did:
1.) Turn off the auto-retrieve mail function in the preferences/general menu. Set it to a manual check. Just check it yourself every once in awhile. It may not be as convenient, but it works, trust me.
2.) Under the fonts and colors menu, set all three fonts to the SAME font (mines Century Schoolbook, but anything works) and turn off fixed-width font. Sometimes mail has a tough time decoding and working with texts, and causes it to freeze.
3.) Clean our your main inbox! Place the emails that you want to keep, but don't need to be in your inbox in a new folder on your inbox bar (mines aptly named 'Saved Messages.' That way, when you open up Mail to your default account, it doesn't have 1,000+ messages to index. Also, try to keep the inboxes from having more than 100-200 messages per. It seems to frown on any more than that.
After trying these three easy, steps, restart mail and see if things run smoother. I have had no problems since these changes, and mail runs a ton better. Plus you don't have to worry about deleting your library/mail folder anymore. Let me know if things work out so I can see if my theory is a universally proven thing. Thanks and good luck!
iMac G5 20" Mac OS X (10.4.5)

Good question. I have worked very little with IMAP other than as a testing device, so, on a daily routine I cannot say how it would function. However, I can only expect that by having the option to download all emails for offline viewing selected, you are right in it being a lag creator. Another suggestion would be, if you are running a single-computer setup, to have the account delete emails from the server after recieving them on your computer. Thus, you reduce the risk of repeat downloads or unnecessary build-up on the server end. DO NOT select this option if you run multiple computer set ups on one AppleMail account system or you will cause some discrepancies and/or data loss from system to system. Or, if you have emails redirected from a seperate server to Mail (i.e. I redirect mail from my university email account into Mail so that I don't have to go to the web-mail site to check it--> just like Gmail or Yahoo etc etc) you won't be able to check them from the web-based email system if you have the system delete them. Ok that sounded confusing. Solution: have the system remove emails from the server after a week (or any period of time, just not immediately) so that, in the off-chance you need to use the online system, you will have access, and will give you a chance to check the emails on other systems without a threat of data corruption (by corruption i mean that frustrating feeling you get when you can't find that super important email that was in your inbox just 10 seconds ago on your desktop etc.)
I will see if I can learn anything more about IMAP Ernie. Its definitley the biggest problem source for Mail, POP and .Mac being simple and functional as long as you don't play with the settings too much. As far as the issue of Offline viewing goes, try turning it off and seeing how Mail functions.
BEFORE you turn it off, however, I recommend saving all of your emails in your inbox as a text file or something so, in case the server burps and has a brain flatuence, you don't lose anything. Been there, done that, thrown the books against the wall in a frustrated rage.
My only reserve about the Offline Viewing is whether or not Mail will, when you click "recieve mail," have to re-download the emails from the server each time. If so, then it may end up taking longer and lagging more. The issue here is obviously minimizing the amount of activity between Mail and the email server without jeapordizing information on the server or multiple Mail programs on the same account. When we can find that balance, I think Mail's potential will be realized. Keep the questions coming.

First time user..problem with compatibility mode

Old problem with a twist. Like others have experienced, when I open itunes I get a message that reads itunes.exe is set to run in compatibility mode and I need to turn it off. The problem I have is that I DON'T FIND a compatibility option when I right-click on Properties. Any ideas???

Refer to this article:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489

Problem with BEx Web Application Designer

Hi,
we use since last week the Web Application Designer with the SAP GUI 7.2.
Now I have a big problem since last week. I can call existing templates but unfortunately not change! I make a change in the template and save it. When I viewed the template again but no change is saved!
A new template I can create and change
Does anyone know the problem? The behavior also occurs with the old Gui 7.1.
Regards
Edited by: Jana VOGL on Oct 18, 2010 10:14 AM

Hi Jana,
Do you get any error before opening of an existing template in WAD? Doesn't look to be a problem with the different SAP GUI versions. Maybe somethings gone wrong with the Java - ABAP config settings or Java Portal communication settings. Maybe you should check with your BASIS team on the same. Tell them what the problem is & they will run a trace to figure out.
--Priya

Multiple user login problem with ADF

Hi All,
I am using Jdev 11g. I have an ADF application which is running inside JDev enbedded WLS. I implemented "Authentication Only" security into the application and created a few users. If I try to login/logout/re-login with individual user, all of users work perfectly. However, when I have one user already logged in, I open another browser and try to login with another user (or the same user), I always get an "Error 403--Forbidden" error. Basically I have an application which can only work for one user at one time. Does anyone know how to fix this problem so that I can have multiple users logged in at the same time?
Thank you very much in advance,
John

Chris,
Thank you for your response.
I am using Firefox version 2.0.0.20. When I add the security component into my ADF application, I just take whatever it has by default without any customization. That includes default login.html and error.html. Here is my experience,
1) Execute my starting task flow activity inside the JDeveloper. This will invoke a new login page in my default browser Firefox.
2) Login the application with user "abc" and do something. Keep this session open.
3) Open another Firefox browser and enter login URL. and then Login the application with user "xyz" (or even "abc"). I got the error page.
To me, it should be basic web application behavior. I can do things like this in other J2EE application. This one doesn't make sense at all. I am not sure if this is the behavior I would see when I deploy it to a standalone WLS.
Any ideas?
Thanks,
John

Problem with bex query listing sales "this month" and "same month last year

Hi,
I've created a query in BW BEx, where I have a mandatory variable for 0calmonth, and I list 0material and sales (in volume, liter). And I have a restricted key figure giving me sales (volume in liter) restricted with 0calmonth = variable - 12, to give me the sale for the same month the user select, previous year.
This seems to be working, the sum is correct, but when adding up the number for the sales in the month previous year, the numbers does not fit the sum in the end.
I think the report only lists materials with sales the month selected in the variable, if a material has not been sold that month, but in the same month last year, it's not listed in the reports, but it's added in the sum in the end.
Example.
We have three records like this:
material - calmonth - volume
101 - 01.2010 - 5
101 - 01.2011 - 8
201 - 01.2010 - 7
The report will give the following (calmonth variable = 01.2011)
Material - volume this month - volume same month last year
101 - 8 - 5
Sum 8 - 12
Any way to solve this issue? We noticed because we run BO - Webi on top of the BEx query, and BO sum's the values per material, and in webi the report would give us the sum 8 and 5.
Any input is appreciated.
Regards,
Øystein

Hi,
thanks for your reply.
The error is that the report only seems to list materials that has been sold "this month", and if the same material was sold the same month last year, it will also list the volume for this.
But if the material is only sold in the same month last year, it's not listed in the report, but it's calculated into the sum at the end.
The report is listing material, which is why the error presents itself, as you said
Getting 8 minus 12 is correct unless you drill down by material. In that case, it should be 8 minus 5 and 0 minus 7.
The row with 0 - 7 is not shown, and my guess is that the report will only list materials that has sales this month (which has been selected in the variable)
Regards,
Øystein
Edited by: Oystein Gundersen on Mar 21, 2011 4:36 PM

Problem with bex analyzer v7

Hello,
I have installed SAP GUI 7.10 and everything is working fine, but the bex analyzer. The problem is that I can see the Toolbox but when Im clicking on the icons of the toolbox it does not work at all, it does not execute anything, so i can not open or edit queries and so on. I have tried to install the last patches (bw 11 and 12), but I can not, I got a message that the patches already exist.
I would like to know what should I install for making it works..hopefully someone could help because I have tried almost everything and I dont know what is the problem.
Thanks in advanced,
Luis

Hi,
I do not mean it, i do not need to launch the correct version of the analyzer from the bw system via rrmx transaction. My problem is that wehn i launch the analyzer via windows like this:
start -> Business explorer -> Analyzer
I can not use the functionalities of the analyzer, they are inactive. The point is: Is it something related with the SAP GUI installion? Have something to do with excel? Or with the windows service pack??
I have installed in my computer the following:
- SAP GUI 7.10
-Windows service pack 2
- Microsoft office 2003.
Thanks and Regards,
Luis

Problem with Bex Customer Exit Variable

Hi Friends,
I have a customer exit variable which is getting filled based on the User Input. I have written the code inside the If condition checking i_step = 2. The code is working as required.
But the problem is when I try refreshing the query or change the user variable selection, the Customer exit variable is not changing. I tried to debug the code and realized that the values for the exit variable based on the previous selection is not cleared and the i_step = 2 is not being executed for the variable.
While I close and reopen the query, the code is working fine.
Does anyone know why this is happening? Please suggest..
Thanks in advance..
Regards,
Priya

Hi Binu,
Here is the code sample. I am trying to populate the month based on the input Week number '0I_WEKIN'
. For eg. If I give 37.2011, the month value should be 08.2011. If I give 39.2011, month should be 09.2011.
WHEN 'ZC_MONTH'.
    IF i_step = 2.     "after the popup
        READ TABLE i_t_var_range INTO lw_var_range WITH KEY vnam =
    '0I_WEKIN'.
       IF lw_var_range-high IS NOT INITIAL.
          l_week = lw_var_range-high.
          l_week = l_week - 3.
          CALL FUNCTION 'WEEK_GET_FIRST_DAY'
            EXPORTING
              week = l_week
            IMPORTING
              date = l_date.
          lw_range-low = l_date+0(6).
        ENDIF.
        lw_range-sign = 'I'.
        lw_range-opt = 'BT'.
        APPEND lw_range TO e_t_range.
    ENDIF.
Regards,
Priya

User Concern Problems with BEx

Similar Messages

Maybe you are looking for