User/connection list

is it possible to get a list from the router to see what is connected to it? (wrt54G)
i see the dhcp list..but it lists only 2 computers and i can communicate with a gaming adapter that is out there but does not show up on the list.

Under DHCP client table it will only list the IP addresses provided by the DHCP server hence your gaming adapter will not be listed.
To view the device connected to you network you can enable log on your router which would also display the devices connected to the network along with their IP address.

Similar Messages

List the total users connected at point of time (portal admin)

Hi Dev2Dev team
Is there any way to get List of total users as well as specific users connected to portal at point of time
is there any way to get the list from portal admin
or from weblogic server
is there any tool available for this
can anyone provide me with the sample or code or tool
Thanks
Surya

Hi All
Is that the data's of login and logout details are stored in Pointbase db by default.
I am using oracle where i have all my default portal tables.
any info appreciated
Thanks
Surya

Displaying a list of Portal users connected and their connection time

We are using Portal version 10.1.2.0.2 and I cannot find in App Server Control (EM Website) how I can track the number of users connected to my portal site as well as their connection time. Are there reports available that will provide the requested information?
Can anyone tell me what other reports are available in this version of Portal that would be useful to an administrator of a portal site?
Thank you,
Denise

select attrvalue as id from ods.CT_UID
give that a burl

How to provide access to multiple users connected to a Dumb switch? (multi-auth/multi-domain)

Good morning everybody,
I am writing on behalf of not being able to implement a desired outcome in our company network. In fact the situation is as follows:
What I want to do is to be able to authenticate users (802.1x authentication) in our company radius server and authorize them access by having a dynamic VLAN assignment in a multi-user environment on one and the same port of a Cisco 2960 switch. So far, the authentication and authorization has been working completely smoothly (there are no problems with itself). The concept involves the configuration of both DATA and VOICE VLANs as I there is also phone authentication implemented. In order to simulate this environment I introduce a Dumb switch connected to my Cisco 2960 Catalyst.
What I have successfully managed to get to work so far is this:
1) On one switch port I have tried the “authentication host-mode multi-domain” and it worked perfectly for a PC behind a telephone, or with one PC connected to a the dumb switch + the telephone connected to another port of the dumb switch. Logically it is the same situation as there is a separation in two domains – DATA and VOICE. Bellow is an output from show authentication sessions for this scenario.
Interface MAC Address Method Domain Status Session ID
Fa0/23 0021.9b62.b79b dot1x DATA Authz Success C0A8FF69000000F3008E (user1)
Fa0/23 0015.655c.b912 dot1x VOICE Authz Success C0A8FF69000000F9009F (phone)
2) On the other hand, when I try the same scenario with the “authentication host-mode multi-auth”, the switch still separates the traffic in two domains and is able to authenticate all users, AS LONG AS they are in the same VLAN.
show authentication sessions:
Interface MAC Address Method Domain Status Session ID
Fa0/23 0021.9b62.b79b dot1x DATA Authz Success C0A8FF69000000F3008E (user1)
Fa0/23 b888.e3eb.ebac dot1x DATA Authz Success C0A8FF69000000F8008C (user2)
Fa0/23 0015.655c.b912 dot1x VOICE Authz Success C0A8FF69000000F9009F (phone)
However, I cannot succeed authentication of many users from DIFFERENT VLANs, neither in multi-auth nor in multi-domain modes.
What I want to get is an output like this:
Interface MAC Address Method Domain Status Session ID
Fa0/23 0021.9b62.b79b dot1x DATA Authz Success C0A8FF69000000F3008E (user1)
Fa0/23 b888.e3eb.ebac dot1x DATA Authz Success C0A8FF69000000F8008C (user2)
Fa0/23 0015.655c.b912 dot1x VOICE Authz Success C0A8FF69000000F9009F (phone)
I want the switch to authenticate the users anytime they connect to itself and for them to have an instant access to the network. (I tell this because I tried scenario 1) with multi-domain mode and authentication violation replace, and it worked but, two users never had access to the “Internet” simultaneously!!!
The configuration of the interface connected to the Dumb switch is as follows.
interface FastEthernet0/x
description Connection to DUMBswitch
switchport mode access
switchport voice vlan XXX
switchport port-security maximum 10
switchport port-security
switchport port-security violation protect
authentication host-mode multi-auth
authentication priority dot1x
authentication port-control auto
authentication timer reauthenticate 4000
authentication violation replace
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
The way I see it is explained in the following steps:
- PC1 connects to the Dumb switch. This causes the Cisco switch to authenticate user1. This creates an auth. session with its MAC address linked to a domain DATA.
- When PC2 connects to the Dumb switch, this causes the violation replace which replaces the recent authenticated MAC address with the MAC of PC2. I would like it once authenticated to appear in the authentication sessions with a link to a new DATA domain linked to the VLAN assigned from the RADIUS server.
Is this possible? I think (in theory) this is the only way to provide authenticated access to multiple users connecting through Dumb switch to the network.
Has anybody ever succeeded in such a configuration example and if yes, I would be love to get some help in doing so?
Thank you
Stoimen Hristov

Hi Stoimen,
I have done a setup similar to yours with the only exception being VLAN assignment. When I used dACLs only, it makes things somewhat easier as the VLAN no longer matters. Remember that the switchport is in access mode and will only allow a single VLAN across it (with the exception of the voice VLAN). I think that is the real cause of your problem.
From what I can see, you have 2 options available to you:
1) Use dACLs instead of VLAN assignment. This means that an access list will be downloaded from the radius server straight to the authenticated user's session. I have tested this and it works perfectly. Just Google Cisco IBNS quick reference guide and look for the section that deals with Low Impact mode.
2) Get rid of the dumb switches and use managed switches throughout your network. Dumb switches will always be a point of weakness in your network because they have no intelligence to do advanced security features like port security, 802.1x, DHCP snooping, etc.
Hopefully someone else will chime in with another option.
Xavier

HT2479 Ok so imovie 11 won't let me export my movie anywhere, no matter what it seems. all it says is he project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list).

Any help would help.

Hi
Error -50 paramErr - Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ?
Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Corrupted preference file: The "com.apple.iMovie.plist" file - trash it
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
• I only use PAL (25fps
Yours Bengt W

What does "error in user parameter list" mean? how do i fix it?

Can't burn my movies to iDVD because this message keeps showing up "Unable to prepare project for publishing". The project could not be prepared for publishing because an error occurred. Error in user parameter list. Please tell me how to fix this.

The first thing I test to do when iMovie doesn't behave as it should is to trash the preference file.
It's a very common way to try to solve problems with Applications that has problems.
Reg iMovie that file is named as one or more of these
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
com.apple.iMovie9.plist
com.apple.iMovieApp.plist
Not always all of them are present - but many can be
I also trash
com.apple.iApps.plist
and clean out the Cache folder
All of them are in a folder named Library - BUT as there are more than one - most people chose the wrong one.
The obvious one is Library on Root level - first window that opens when You open Your Start-Up Hard Disk.
AND - that is the wrong one
The one to find is the one in Your User Account folder - and in Mac OS X.7 and so on - it is HIDDEN.
Easiest way to find the correct one is to go up to the top row Menu (Apple symbol to the top Left hand corner of screen) and here go to the right to GO and keep Option-key DOWN and it will Show You the correct Library.
Now - here find the folder Preferences to move out the com.apple.xxxxxx files to the desktop WHEN APPLICATION IS NOT RUNNING ! IMPORTANT !
then find the folder named Caches - here too - try to identify the cache files that are connected to the application - and move them too to desktop.
Now try to run Your application e.g. iMovie
There is an easier way to test if this is the real problem by
• Goto Apple menu and down to System preferences
• Select Accounts
• Click on the Plus sign and create a new user e.g. test1
• Apple menu - and down to Log out
• Now log into the new user test1
• Now see if application runs as intended
If so - then the problem to 99% is in the Pref or Cache files.
Yours Bengt W

ParamErr: error in user parameter list

I am trying to finalize an iMovie11 project, and I get this error message: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list).
I rebooted and relaunched iMovie to no effect. What does this mean?
L

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Cannot publish iMovie project paramerr: error in user parameter list

When trying to publish imovie project, getting message:
Unable to prepare project for publishing.
The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
Can anyone help explain what to do? My first project.
Thanks!
Rick

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Unable to prepare project for publishing. Error in user parameter list

After editing the project in iMovie '09 I am getting strange problems.
1) If I try to share the project to iDVD I get the Error Message: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". The same error message I get when trying to "Export Movie".
2) If I play the movie (either in the preview window or in full screen), I hear the audio, but the video remains on the picture, I was, when I start playing. This wasn't the case until yesterday. I don't know, what has changed this.
I am not sure, if both problems are connected.
If I try to play a clip, everything still works well, means audio and video are playing as expected.
Any ideas, what I could try to solve this (I already tried to restart iMovie, checked that I have the newest version 8.0.1 (740) and tried to restart my iMac?
Leela

I'm having the same problem, though it wasn't triggered by me importing anything. I had an almost complete project that I was just editing down and tightening up. I was making some deletions and moving some clips around when the project just went all wonky. If I hit the space bar the video will play. Audio, video and titles are all as they should be. But the editing window is frozen. The raw clips have disappeared from the upper left. When I restart the app the editing window is sometimes blank. But if I drag another application across the screen (like Mail or iTunes) the clips regenerate in the viewer window. This is a HUGE disappointment for me. After wasting an hour trying to solve this I now have to start completely from scratch with this project.

Error in user parameter list!!!

I have been trying to upload a video on to youtube from imovie and everytime i hit publish, a box comes up that says:
Unable to prepare project for publishing.
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
I have no idea what this means, nor do i know what to do to fix it. I have searched everywhere online for an explanation and each is either completely confusing or doesn't apply to my situation. I cannot export the movie in any form either, except when i go to export it, there isn't an error message it just doesn't do anything.
PLEASE PLEASE HELP AS I NEED TO UPLOAD THIS VIDEO AND I AM ON A VERY TIGHT DEADLINE!!!!!!

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Can also be a working - way around.
NEW INFO from: Apple Geek 0819
• First, you do need to relaunch iMovie.
• Second, rather than opening the movie you want to export, you right-click on it and select export in the Project Gallery.
• This obviates the need for iMovie to load your project into memory, and allows it to commit all of the computer’s memory to the rendering task.
Yours Bengt W

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

I made an IMovie project and I can't now make a DVD of it. A window says there are problems and that they are shown in the User Parameter List. I am at a loss. Don't know what to do. HELP

I have made an IMovie consisting of slides and some video. I cannot create a DVD with it. A window tells me there is a problem and that the problem is listed in the User parameters.....I am at a loss. There are hours of work in the Movie. Anyone have a thought? HELP

problem and that the problem is listed in the User parameters
Can it be
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

A question about tracing users' connections

Dear all,
I would like to know, whether there is a report in SAP
providing information about users connection. What we
are looking for in terms of information is:
1) How many times each user connected to the system?
(for example how many times during each day or each week)
2) How long each session lasted?
3) What standard transactions did each user execute during
each connection?
Is there any report providing such information?
Thanks in advance,
Kind Regards,
Dariyoosh

Hi Dariyoosh,
1) How many times each user connected to the system?
SM20 (Information security audit logs ) In USER Statistics and Terminal statistics , you can get enough information .
ST03N
In ST03N (Workload distirbution monitor ) you can find ,what is the workload of individual users and which actions users performed ?
2) How long each session lasted?
In tcode - SM20,you can find detaild activites about users in Users statistics field . Secondly For transcation details ,Please select Transactions statisitcs field .It
will provide you enough information
AL08 Shows you Tcodes using by user time ,external & internalsessions .Also with tcode SM04 You can find list of users .There is USER TAB on top left hand side
You can click on that and select " Techincal Information , you will get informatoin STATE , MODES ,MEMORY COnsumption etc .
3) What standard transactions did each user execute during
each connection?
Pleae use these tcodes :SM20, SM04(users overview) , AL08
Thanks in advance,
Kind Regards,

Simulate Multiple users connecting to same session

Hi All,
Is there anyway we can simulate multiple users connecting to the same session in oracle using PL/SQL.
Thanks,
MK.

As per the architects in our company, lots of users connect to the same session and access the database.Exactly what does this mean? A single session can service one user at a time. I would wager that the architects are envisioning (or describing) a connection pooling setup where the middle tier server maintains a relatively small number of connections to the database (each with its own session most likely) and users operate by getting a connection from the pool, making a request, and returning the connection back to the pool. At any given point, only one user can be using a connection.
If that's the case, you would simulate this by simply executing code in a loop in PL/SQL.
Of course, if this is the case, each connection in the connection pool would its own copy of the collection and so each connection would get its own list of order numbers. You'd have to develop some way to ensure that each session populated its collection with a different set of order numbers.
Justin

Cannot view history of direct access users connecting to Forefront UAG

Hi, I'm trying to get a list of the users that have been connecting through UAG Direct Access for the past month. I've tried using the methods shown in the technet articles about monitoring of UAG Direct Access either using Powershell or the TMG event loggin
console, using this links:
http://technet.microsoft.com/en-us/library/gg313776.aspx
http://technet.microsoft.com/en-us/library/gg313783.aspx
Using the TMG event logging I see a lot of data from a few days back, even if the filter is set to 30 days, and the log is supposed to be up to 8GB in size before overwriting. The info that it shows is only about sessions to the portal trunk and not direct
access. I know this because on the UAGModuleID column there is no there are no "connected" or "managed" sessions, all are SessionMgr, UserMgr, Filter and RDG mainly.
Through powershell I tried running the following commands after importing the module according to the article:
Get-Directaccessusers -showhistory $true and no results are shown.
Get-Directaccessusers -showhistory $true -starttime "1/6/2015 8:00AM" and no results shown
Get-Directaccessusers -showhistory $true -starttime "1/6/2015" no results
Get-Directaccessusers -showhistory $true -starttime "1/2/2015 8:00AM" -Endtime "1/11/2015 8:00PM" no results
Get-Directaccessusers -showhistory $true -username user = no results.
Get-Directaccessusers -username user = no results
the only command that shows any data is just Get-Directaccessusers but that shows the current Direct Access users, no history.
I checked the Registry HKEY_LOCAL_MACHINE\SOFTWARE\WhaleCom\e-Gap\von\MonitorMgr\sql-builtin-log registry key and it is on 1.
Any ideas on how can I get more history data on the direct access users connecting through UAG?
Please let me know.
Appreciated it.
Thank you!
Eduardo Rojas

Russel,
the problem has been solved now! The final thing missing was just a check in a checkbox.
Below a comprehensive explanation that may help others.
We basically did what you proposed:
We sent a ping from one of the DA-Clients to the TS-Farm members. Since we got replies, we knew that IPv6 communication generally is okay. The answer received was an IPv6. In this scenario we had not yet given any IPv6 to the farm-members! Thus we knew it must
be comming from the DA DNS-Proxy. There are a number of DA-GPOs and one of them is dictating the net portion of the IPv6 to be used in DA-communication, appended by a hex-translation of the target computers IPv4. Therefore the DA DNS-Proxy is taking the GPO-set
IPv6-value, adds the IPv4 in hex and sends it back as an ICMP echo.
With this in place and working correctly one can ping any domain host from any DA-Client. This is configured when initially setting up DA and is handled by the wizzard. Once DA is installed this should all be in place without extra user interaction.
We then took those IPv6 answeres and turned them into fixed IPv6es of the farm-members (each member its own IPv6). So far so good, but this is where it still did not work. Evaluation of the Connection Broker log showed that the redirect reply still included
only the IPv4 of the target farm-member. With that (after a short while) we realized that one has to set a
check in the Connection Brokers Settings, so that the IPv6 LAN-Connection will be used for redirects as well and not only the IPv4 LAN-connection..... How stupid is that? :-)
But as we all know - in dealing with server configuration - you should always "know before you go". But even though you may think you do, when finally arriving you know you didn't.... And that's what we call experinece.
Thanks to Russel for your interest and help.
Brgds Ralf

User/connection list

Similar Messages

Maybe you are looking for