User creation error after installing Local portal

Hi Everyone,
I am presently running ECC 600, with Netweaver nw04s and J2E engine.
I have installed MSSQL and then the J2E engine. I have also activated the SAP* superuser account.
I would like to create users now. When i logon with SAP*, a register link appears on the portal logon page. When I click, it gives me a message telling me that "You are not authorized to perform this action. Contact your system administrator".
What should I be checking/activating in the setings in order to be allowed to create new users with SAP* account.
Thank you.

What is the datasource you are using?
If your default datasouce is ABAP..then assign SAP_J2EE_ADMIN to the user ID for User administration and make sure that your sapjsf ID has the roles SAP_BC_JSF_COMMUNICATION in ABAP stack.
Try out these links. It may be helpful.
http://help.sap.com/saphelp_nw70/helpdata/en/ce/3ba49112f044509fcd46a2e90fe6ec/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ce/3ba49112f044509fcd46a2e90fe6ec/frameset.htm

Similar Messages

OIM User Creation Error After OIM and OID Intregation

Hi,
I am new in oim and i am getting popup error message for user creation from OIM application after oim and oid intregation through libovd.
Error message : LDAP create event failed : orclguid attribute has duplicate value.
please guide me for resolving error.
Thanks & Regards,
Rajeev

Hi,
Thanks for reply...i checked1307549.1 in metalink, In that link they are telling us to modify some tables in the data base.i have some question regarding the following steps please help.
=== ODM Solution / Action Plan ===
1. Use the following query to find fields with "plain text" values:
select svr.svr_name, spd.spd_field_name, svp.svp_key, svp_field_value
from svp
inner join spd on spd.spd_key = svp.spd_key
inner join svr on svr.svr_key = svp.svr_key
2. Set these plain text values to null after making backup of table.
*(kashyap:: Which fields values we have to change)*
3. Edit the Directory Server to re-set values.
*(kashyap:: could you please explain this)*
Expected error at this stage:
-- no "System Error call admin...", but that makes sense since the values in question pertained directly to the Directory Server --

Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet HWaddr 00:15:17:F7:81:53
          inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
          inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

Error after Install SAP NetWeaver 7.01 ABAP Trial Version

Hi Everyone,
I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
Someone could help me?

Hello Marques Polastri ,
->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
Try to connect to the database NSP & let us know the results.
-> Please update with output of the following commands:
dbmcli db_enum
dbmcli -d NSP -u <control>,<pwd> db_state
Thank you and best regards, Natalia Khlopina

CFGFWK-60850 Error while installing weblogic portal 10.3.5

I am getting below error while installing weblogic portal 10.3.5 configuration wizard for creating domain. Please help me resolve this issue.
OS: Windows 2008 64 bit
Installable file: portal103_generic.jar
This is the first weblogic installation.
Installtion command applied: java -d64 -jar portal103_generic.jar
Test JDBC data sources.
Data Source=cgDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=cgDataSource-nonXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=p13nDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceAlwaysXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceNeverXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Why I am getting this error ? How can i resolve this ?
Edited by: Prajeesh Kumar KM on Feb 25, 2013 12:26 AM

I'm getting this error as well.
Did you resolve this problem?

My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?

*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.

Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena

Error while installing weblogic portal

I am getting the following error while installing weblogic portal 10.3.2 generic.jar on existing weblogic server 10.3.2 generic.jar installation on RHEL5 with jrockit mission control 3.1.2 as jdk.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at com.bea.plateng.common.ui.console.DelegateConsoleWidget.invokeWidgetCallback(DelegateConsoleWidget.java:200)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.onLeave(ConsoleInteractTask2.java:439)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.okNext(ConsoleInteractTask2.java:361)
at com.bea.plateng.wizard.WizardController.nextTask(WizardController.java:642)
at com.bea.plateng.wizard.WizardController.run(WizardController.java:519)
at java.lang.Thread.run(Thread.java:636)
Caused by: java.lang.NullPointerException
at java.io.File.<init>(File.java:239)
at com.bea.plateng.wizard.installer.diskspace.TempDir.<init>(TempDir.java:55)
at com.bea.plateng.wizard.installer.diskspace.TempDir.getInstance(TempDir.java:41)
at com.bea.plateng.wizard.installer.helpers.DiskSpaceHelper.checkDiscSpaceForProductInstallation(DiskSpaceHelper.java:255)
at com.bea.plateng.wizard.installer.helpers.ProductDirHelper.setStoreKeysAndValidateDiskSpace(ProductDirHelper.java:474)
at com.bea.plateng.wizard.installer.helpers.ProductDirHelper.validateAndSet(ProductDirHelper.java:278)
at com.bea.plateng.wizard.installer.console.tasks.ProductDirChooserConsoleTask.onLeave(ProductDirChooserConsoleTask.java:235)
... 10 more
anyone please help

I'm getting this error as well.
Did you resolve this problem?

Relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express)

Hi,
I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
=========================
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
appr60ue.LIST
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Unable to get the objects for module "APPR60UE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
=========================================
Has anyone faced something similar in the past?
Regards,
Neeraj

Hi Helios,
That got resolved after I added the location of the dll in the PATH.
Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
The log looks like:
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe
-MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
gnumake: ***
[D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Regards,
Neeraj

Getting error after installing admt 3.2

hi team
i am getting error after installing the admt 3.2 on server 2008 R2 where i have installed sql server 2008 sp1 with express edition
the server is a DC
the error is "Unable to check for failed actions. :DBManager.IManageDB.1 Unable to retrieve the database file pagth from the registry. the system cannot find the file specified"
Thanks,
viraj

You should change the forum type on this to a question. The way you have this labled as a discussion not a problem.
See if the link below helps you out.
http://support.microsoft.com/kb/2266373
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
http://www.pbbergs.com Twitter @pbbergs
http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided "AS IS" with no warranties, and confers no rights.

Getting a reistry error after installing telling me to reinstall itunes

I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
Thanks,

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HP4501e "print spooler off" error after installing printer update

Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

I get a 213.10 error after installing Captivate

Why do I get a 213.10 error after installing Captivate 7 on a Windows 7 32 bit workstation?

These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?

Read/Write errors after installing SSHD

After installing a Seagate Thin 500GB SSHD into my Late 2008 MacBook Pro, I would get errors after my computer had been asleep for several hours. The error codes end with -50. I thought that limiting the speed of the drive with a jumper would work, but it hasn't.

This is from the Toshiba knowledge base : http://forums.toshiba.com/t5/Computer-Troubleshooting/Errors-after-installing-new-advanced-format-ha...
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

'CRT not initialized' error after installing MS Office 2010

Hi,
I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
- OS : windows 7 Enterprise (32bit)
- Labwindows/CVI (v12.0.0 (422))
- MS Office 2010 (word, powerpoint, excel)
#1. clean install windows 7 (32 bit)
#2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
#3. compile and run attached test program : SUCCESS
#4. online update windows 7 (service pack, explorer 9, and etc)
#5. compile and run attached test program : SUCCESS
#6. install MS Office 2010
#7. compile and run attached test program : 'CRT error'
#8. uninstall MS Office 2010
#9. compile and run attached test program : SUCCESS
I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
Thank you in advance.
Attachments:
step7-CRT error.jpg ‏31 KB
test program.zip ‏3305 KB

More specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
Could you tell me why this problem occur?

User creation error after installing Local portal

Similar Messages

Maybe you are looking for