User defective after org. unit change-Dont want to change BP

Hi,
We are on SRM 4.0 and we replicate our org. strcture from backend R/3.
Whenever any user in the org. structure is moved from one org. unit to another the user becomes defective and it needs to be repaied at level 02.
The repair level 02 requires deletion of old BP and creation of new BP. We dont want the deletion of BP to happen.
Some of the forum answers have been to unassign the BP and assign it again in the new org. unit. But I'm not sure why but it's not helping in my case.
I would appreciate if someone can send me a screenshots of the above steps(Unassign and reassigning BP) .
Best regards,
Sam

Hi,
Please follow the below procedure for unassign and reassign BP.
1- Goto Tcode PPOMA_BBP.
2- Right Click on the BP which you want to unassing.
3- Select Delete-->Assignment.
By doing the above steps you can unassign the BP.
Now for re-assigning the BP to the ORG.
1- Goto TCode USERS_GEN.
2- Choose "copy user and employee datafrom template".
3- Choose the option "Create Users from Existing SU01 Users".
4- Give the Org Unit (ID) in which you want to reassign the BP.
Now your BP will assign to the given Org Unit
Regards,
Sachin

Similar Messages

  • Unassign users from a Org unit and reassign to another org unit

    Hello Friends,
    There are users in my org who are already assinged to a org unit through USERS_GEN transaction (from SU01 users) and are creating shopping carts for the past four months without any issue.
    Now there is a requirement to assign few of the users to another org unit.
    I have created that org unit but not sure how to reassign it to a new org unit.
    I am new to SRM. Any help will be appreciated.

    Hi Dihsa,
    Thanks for the fast reply.
    In that link it has been mentioned that users can be unassigned from a org unit through USERS_GEN txn or drag and drop.
    I already unassigned a user by clicking on delete assignment in PPOSA_BBP. While I am trying to reassign the user through USERS_GEN to new org unit, I am getting the error: Central Person for this user already exists with E BBPU_MESSAGES 042 &.
    After going through some of the threads I realized that I should not do like that for deleting a assignment.
    Also I found one thread which is telling that ....new org unit has to be selected and then by clicking on the Assign button --> Incorporates..Postion.. a user can be reassigned.
    Is it a right way to do that.... I don know how to unassign using USERS_GEN txn.
    Also it would be great if you could help me to resolve the above error.
    Please guide me.

  • Org unit changes but position not  when emp move from 1 org unit 2 other

    Hi,
    We have a scenario in which when an employee moved from org unit to another (temporarily) his position doesn't get changed but org. unit changes. How to manage it???
    Thanks in advance
    Anand

    Hi Naveen,
    Let me expain the process in details when you enter "Position" in IT 0000 & 0001  in Emp. Master (PA30) it inherites Org. Unit, Org Key and Cost Center. To get inheritance of org unit, org key, cost center along with position you have to assign all to org. unit in PPOM.
    I want "Position" to be remained unchanged when an employee moves from one org unit to other only organization unit need to be changes.
    Please suggest
    Thanks a lotttttttt

  • User Assigned to Org.unit

    Hi all...
    I have list of user ..i want to find these users assigned to org.unit ?
    i need the list in production.. so i can't write the code...
    how can i find? any view or direct table which will list these stuff..
    thanks...

    Hello,
    Use HRP1001 table:
    SELECT objid FROM hrp1001 WHERE sobid = 'user ID' AND plvar = 'active PLVAR'
    SELECT sobid FROM hrp1001 WHERE objid = objid
    SELECT sobid FROM hrp1001 WHERE otype = 'S' AND objid = sobid AND sclas = 'O'.
    Regards.
    Laurent.

  • How can I format my intell based imac without the original Tiger discs? I have a user account on it that I dont want. I have upgraded to Snow Leopard but I want to to star affresh. Thank you.

    How can I format my intell based imac without the original Tiger discs? I have a user account on it that I dont want. I have upgraded to Snow Leopard but I want to to start affresh. Thank you. I have tried loading the Snow Leopard disc whilst holding down th C key but it goes straight into install mode. I am new to Macs and I have inherited this machine.

    Hello, many options...
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion do a new install.
    Or...
    Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

  • Not able to view reports by users under top org unit- Interactive Reports

    HI,
    We are using CRM interactive reports.
    In my project the client is having 3 Sales Org with two sales office and two sales group for each office respectively.
    When the document is created by the  sales Executiv, he and his manager is able to see it in the reports but the top person of that org unit is not able to see  the report.
       Some say the report can be viewed by only employee responsible and his manager. In my project the core team is sitting in the top ORG unit. They want to see the reports of all the sales org units.
    With Regards,
    Selvam T

    Dear Luke,
    I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
    Is there any specific step that needs to be done to see these branches.
    By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
    Regards
    Hkishan

  • Org Unit Change Report

    Hi,
    I have an requirement, need to create report which specifies all the list of Org Units that are created and delimited during the given period.
    The report has to display any changes for Org. Unit in HRP1000, HRP1001 and HRP1008.
    Please suggest how to find out any changes occured for Org. Unit.
    Standard report RHCDOC_DISPLAY needs to be used for Org unit change history report.
    Regards,
    Sunil

    You need to maintain the Settings for "CHANGE DOCUMENTS" in the Config;
    use this IMG Path :
    Personnel management -
    > Organization management -
    > Basic Settings -
    >Activate Change Documents
    Execute the link Activate Change Documents and maintain all the settings as below;
    Plan Version : 01
    Object Type : S , O , (all the objects that you like to put )
    Infotype : 1001 / 1008
    Subtype : *
    Active :  Tick the check Box.
    You need to create One line per Object type;
    Ex :   
    01(Plan)                                   S (OTYPE)                         1001(ITYPE)                             *  (STYPE)                         Tick Mark (Active)
    Hope this would give you clarity.
    Regards,
    Anirban

  • User inconsistencies when re-assigning users to another org. unit

    Hi
    I am getting error messages whenever i re-assign a user to another org. unit. I use drag and drop. When I check the user with users_gen I get 3 different error messages. I try the repair but the repair does not work. Has anyone else experienced this problem. Does anyone know any notes that can be used to fix this?
    We are on extended classic, SRM 5.0
    Kind regards

    Deepa,
    Please check for non-inherited values.  We maintain values at the org unit level, so that when we drag/drop a user to another org unit, most to all of the values are re-inherited. You can which ones are by the inherited flag.
    See if that is your problem.
    Regards, Dean.

  • EBP Security -  Users under single org unit

    Hi All,
    My Client has a question on EBP Security and I want you experts to help me in this regard, as I did not work on it before.
    Initial screen of transaction code USERS_GEN, its better says to limit number of users under a single Organizational Unit to 200, just to avoid performance issues.  (EBP Version 4.0)
      Right now my client has over 300 users under a single Organizational Unit and they are planning to add more. They want to find out, what potential problems or performance issues can be expected if, they go beyond 200.
    Thanks in advance.
    MK

    There is no performance involved in the number of users sharing the same org unit.
    The number of different Org Objects  in a single role make an impact on performance, but can be ignored.
    What has an impact is the number of Org units you want to segregate on as it will impact the number of role variants to create and maintain, this is not a system performance issue, but a personnel/cost issue!

  • How to find users logged on Org Unit

    Hi All,
    We are setting up printing on our CRM 5.0 system (Web interaction centre) and was wondering if anyone knows of a way to find out what Org unit the users is logged on as ??
    We are using Actions to print specific smartforms off for the users and need the prints to go to an assigned printer.. We are hoping to use a printer that is assigned to the 'Default Printer' attribute in the org structure (PPOMA_BBP)
    As you will be aware users can be in many positions (under the org units) in the org structure and when we log onto the Web IC we get the option of which one we would like to use... Is there a function that can read this Org unit so we can use it in the printer determination BADI to decide what printer the prints will go to ???
    Many Thanks
    Gaz

    In case anyone is still looking for this solution, here is how:
      data: lr_usett type ref to cl_crm_ui_user_cb.
      lr_usett = cl_crm_ui_user_cb=>get_instance( ).
      call method lr_usett->get_org_object
        importing
          ev_org_objid   = lv_objid
          ev_org_objtype = lv_otype.

  • Problem with Org Unit Change

    Hello Experts.
    We have a problem here.
    There is an employee say : X in position ABC which belongs to Org Unit XYZ.
    Now, there is a change in the Org Structure. The postion has not changed, the employee belongs to the same position. But the Org Unit has changed to PQR and has a new chief.
    The problem is, in the SAP Portal, the Organization assignment is picking up the Chief of XYZ instead of the new chief.
    What could be the reason for this?
    Regards
    Avik

    Hi Avik,
    Check dates on records for ABCu2019s A|003 relationship to PQR and chiefu2019s A|012 relationship to PQR. Maybe the old records were not delimited and hence they are getting picked up.
    Donnie

  • How does workflow retrieve users under an org. unit when sending email

    Dear All:
    Workflow supports sending email activity where you can specify the receipt type and receipt ID. For example, the email is supposed to send to the users within an organizational unit.
    I am just wondering how SAP workflow determines the users within an organizational unit? Does it use HR-ORG evaluation path to get objects under an org. unit?
    Many Thanks in advance!
    Haifeng

    Hi,
    For example, the email is supposed to send to the users
    within an organizational unit.
    Yes workflow template and standard task are also part of organizational unit. As you mentioned that the if the recipient type is choosen as Organizational Object then the workflow system will try to fetch the data from the organizational unit based on the recipient ID you provided in the mail step let say if you are using the recipient id as position Id then workflow system will try to get the data from the organizational unit
    Org object types supported by the workflow system are US, C, S, O....
    If at all the you choose the workflow recipient type as email address which can be a external address then in that case it just simply makes use of BCS communication methods and and in this case your SCOT settings must be configured properly.
    The difference between the first and second  is, in the first case the work items or mails/documents will be sent to sap inbox (SBWP) in the second case it depends on the mail ID you mention for example a outlook mail ID.
    Regards
    Pavan

  • Users within an org unit

    Hi,
    is there a function module or a table by which we can find all the users within a purchasing group of purchasing organisatiopn unit.
    Looking for a quick response.
    Regards,
    Neha

    Hi Neha,
    Just run this FM
    BBP_OM_STRUC_GET_USER_FROM_ORG
    2.click on  START_OBJECTS
    3. Under OT just type O and under OBJID provide the Org Unit Number for ex 50000123
    4.Click on Back Button and Execute
    5. Under Export Parameters you wil find  a internal table called "USER_TAB" with list of entries
    6.Click on that , there you will find the list of users under that particular Org unit
    Sameer

  • Error in el01 after MR unit change

    Hi,
    I need your help :
    Partner with BP period 2011-01-01 to 2011-04-30.
    An advance invoice has been made out with payment date 2011-02-28. Now BB plan is inactive.
    Creating interim billing in 2011-03-05  (interim meter reading with billing)
    MR unit change from 06.03.2011 (MR unit with BB cycle=0)
    Error (el01) while creating MR order for installation (data: 20.03.2011)- interim with billing (02) ; message E9 035 'No objects
    corresponded to the selection criteria'.
    The only way is to do it with the device. Is there any way to do it for installaton?
    From 2011-06-01 everything is OK. (for both)
    Thanks.

    Hi,
    If you would like to enter the MR result with MR reason 02 - Interim billing, you do not need to create MR order. Just enter the installation number, date of MR. After that you can enter the MR results and save.
    The MR order will be created immediately.
    Best regards
    Vlado

  • Function Module for finding all the users in an org unit?

    Hi,
    is there a function module or a table by which we can find all the users within a purchasing group of purchasing organisatiopn unit.
    Looking for a quick response.
    Regards,
    Neha

    Please use the function module BBP_OM_STRUC_GET_USER_FROM_ORG.  You have to pass the Org Ids in the parameter START_OBJECTS. Then USER_TAB will give you all the users.
    Note:
    OTYPE = 'O'.
    OBJID = <Org Id say 50002323>.
    Regards
    Kathirvel
    Edited by: Kathirvel Balakrishnan on Sep 24, 2008 2:25 PM

Maybe you are looking for