User defined macro in SNP PB abends

Hello
We ahve a simple macro to clear a key figure value in the initial column. Macro works fine in Interactive planning. Maco abends with the error "Assertion Failed", when we run in the background.. Any pointers / help would be appreciated.
Raghu

I have seen this assertion failed error specifically with alert macros. We had the problem because we used to run 12 alert macros in parallel. Then we put in a performance intensive alert macro - that is 13 alert macros in parallel and we started getting the assertion failed error. We then removed the performance intensive macro and started running it separately and it solved the issue. Run the macro and ask your basis team and dba's to monitor the utitlization of memory and see if the macro is failing because of performance reasons
Thanks
Aparna

Similar Messages

2960s switch gui and smartport user defined macro

Hi,
I have a few 2960s switches and would like to use the GUI to configure ports using the smartport function. These seem to be based on predefined macro's which I can't edit. I have created my own macro, how do I enable the macro in the GUI so I can use the use my own macro?
Regards,
Paul

Ok, SmartPort macro is now a HIDDEN command, since 12.2(58)SE and later.
If you've got a macro you want to use, you have to enter it using CLI. Here's how you do it:
config t
macro name <BLAH>
[ENTER YOUR MACRO HERE]
[Use the "@" to end your macro]
end
To envoke the macro:
config t
interface <BLAH>
macro apply <MACRO NAME>
end
To view the macro:
sh pars macro name <MACRO NAME>

User exit macro - Program name

Hi,
In the APO macro builder, we have a USER EXIT MACRO defined and i just see the description of the macro there. Where do we see which User exit (Program) it is executing if i run the macro?
Thanks,
Shankar.

Hi,
Refer to the note 418801 which explains in detail about user exit macro.
Regards,
Sunitha

Numbers assigned to user defined dimensions

Dear Experts
I have created application set from APPSHELL and created three user defined dimensions viz., A, B and C
Then removed all not required dimensions including 'P_ACTIVITY' which was a User defined dimension.
System has assigned numbers as U4, U8 and U9 to these dimensions on its own (I do not know what is the logic system is following to assign numbers to these dimensions)
Questions:
1. What is the logic system is following for assignment of the numbers to User defined dimensions?
2. Can I change these numbers to U1, U2 and U3 (for ease in ad-hoc reporting). If YES how can I do that?
Thanks

Hi,
The userdefined dimensions are named Sequentially as they are created and these are not constant for them, the same dimension may have different names in different applications.
Also the user defined dimensions are named as Ua to Ux in NW.
For example, in App1 some dimension X may be named as Uc, the same dimension X in App2 may be named as Ud or some other.
We need to manually work betweeen "a to x" with the below macro to find the exact name for the user defined dimension in the application.
"MNU_eTOOLS_MEMBERSELECTOR_X"
Eg:
MNU_eTOOLS_MEMBERSELECTOR_Ua
Also as suggested in earlier replies i dont think this naming can be changed.
Hope this helps,
Regards,
G.Vijaya Kumar

User exit macro

Hi ,
I am Working in APO, I am just trying to create a User function macro that will fetch the values from a row in the plan book to do some maniplulation.
Can anybody tell me how to go out doing that and also want to know
What is the stored in VAL_TAB and PLOB_VALUES.

Hi!
Did you have any reply on your problem about the user function in a macro?
I'm facing the same problem now.
I have my macro, I've defined my function module but I don't how how to save data in my planning book from the function.
I would like to fill in a specific key figure in my plannig book (so that users see a specific, calculated value).
But I don't know how I should pass this from within my function module to my planning book.
Thanks a lot
Caroline,

Error while processing a user defined screen

Dear Experts,
We have developed an add on for our client in which we have a user defined screen before adding the GRPO. While adding that we are getting the error to generate this document first define the numbering series in the administration module.
this is happening only after we upgraded to the 2007 B PL 10 version. till that there was no problem. We are unable to remove and replace the UDO and UDT as we have data in it.
due to this we are unable to proceed with the GRPO.
Please help us.
thanks and regards,
Yeshwanth Prakash

Hi,
Please search the forum before posting a new message.
There are endless posts about that error.
Regards,
Vítor Vieira

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Error in conditional map using User Defined Function

All,
In my mapping I basically have a user defined function that returns the filename of my inbound file from the adapter-specific message attributes (file adapter). I know this is coded properly because if I simply assign this function to my destination field I can see the filename in the payload XML.
However if I conditionally check that returned value using if,then,else I get an error message stating:
"During the application mapping com/sap/xi/tf/_MaterialData2ZcustProdMastMulti_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation"
Essentially in my if I'm checking if the value returned by my user defined function is equal to the constant "SOMECONSTANT" then I'm setting my destination field to some other constant value. Otherwise it's equal to a different constant value.
Any thoughts?

Claus,
Thanks for the help. I actually had figured the problem out on my own. Sorry for not updating the thread sooner. What happened was this (as I suspected it wasn't related to my user defined function). For the newbies out there (of which I'm one) the problem was I was comparing strings in the graphical mapping tool using the Boolean "EQUALS" rather than the Text "EQUALSS".
Can you give yourself points for solving

Using user-defined data types in Forms 6i

When I use the following code in Oracle Forms 6i
PROCEDURE test IS
prcl prcl_ty;
BEGIN
prcl := prcl.setParcel('xxx-xx-xxxx');
END;
I get 'Error 801'. However the above does work in SQL editor. The online help says PL/SQL8 client-side program units cannot support Oracle 8 object-related functionality and I suspect this is the reason I get the error from Forms. Is there a work-around for this.
The TYPE is defined as:
CREATE OR REPLACE
TYPE PRCL_TY AS OBJECT
(parcel VARCHAR2(11),
MEMBER FUNCTION getBook RETURN VARCHAR2,
MEMBER FUNCTION getMap RETURN VARCHAR2,
MEMBER FUNCTION getItem RETURN VARCHAR2,
MEMBER FUNCTION getItem_NS RETURN VARCHAR2,
MEMBER FUNCTION getSplit      RETURN VARCHAR2,
MEMBER FUNCTION find RETURN VARCHAR2,
MEMBER FUNCTION find (yr in VARCHAR2) RETURN VARCHAR2,
MEMBER FUNCTION isValid RETURN BOOLEAN,
MEMBER FUNCTION toString                     RETURN VARCHAR2,
MEMBER FUNCTION toString (par IN VARCHAR2) RETURN VARCHAR2,
STATIC FUNCTION setParcel (istr IN VARCHAR2 DEFAULT '000-00-000A') RETURN prcl_ty) -- to be used as a constructor
NOT FINAL
CREATE OR REPLACE
TYPE BODY PRCL_TY AS
MEMBER FUNCTION getBook RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,1,3);
END;
MEMBER FUNCTION getMap RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,4,2);
END;
MEMBER FUNCTION getItem RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,6);
END;
MEMBER FUNCTION getItem_NS RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,6,3);
END;
MEMBER FUNCTION getSplit RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,9,1);
END;
MEMBER FUNCTION find RETURN VARCHAR2 IS
found varchar2(1);
BEGIN
begin
select 'x'
     into found
     from casrp
     where cp_book_num = self.getBook
     and cp_map_num = self.getMap
     and cp_item_num = self.getItem
          and rownum = 1;
     return 'CASRP';
     exception
     when NO_DATA_FOUND then
     begin
select 'x'
     into found
     from pro_prop
     where pp_book_num = self.getBook
     and pp_map_num = self.getMap
     and pp_item_num = self.getItem
          and rownum = 1
          and NOT EXISTS (select 'x'
                              from cncl_prcl
                              where cr_book_num = self.getBook
                              and cr_book_num = self.getMap
                                   and cr_book_num = self.getItem
                                   and rownum = 1);
     return 'PRO_PROP';
     exception
     when NO_DATA_FOUND then
          return '';
     end;
end;
END;
MEMBER FUNCTION find (yr IN VARCHAR2) RETURN VARCHAR2 IS
found varchar2(1);
BEGIN
begin
select 'x'
     into found
     from casrp
     where cp_book_num = self.getBook
     and cp_map_num = self.getMap
     and cp_item_num = self.getItem
          and cp_tax_yr = yr
          and rownum = 1;
     return 'CASRP';
     exception
     when NO_DATA_FOUND then
     begin
select 'x'
     into found
     from pro_prop
     where pp_book_num = self.getBook
     and pp_map_num = self.getMap
     and pp_item_num = self.getItem
          and pp_tax_yr = yr
          and rownum = 1
          and NOT EXISTS (select 'x'
                              from cncl_prcl
                              where cr_book_num = self.getBook
                              and cr_book_num = self.getMap
                                   and cr_book_num = self.getItem
                                   and cr_tax_yr = yr
                                   and rownum = 1);
     return 'PRO_PROP';
     exception
     when NO_DATA_FOUND then
          return '';
     end;
end;
END;
MEMBER FUNCTION isValid RETURN BOOLEAN IS
i number;
BEGIN
for i in 1..8 loop
     if substr(parcel,i,1) not between '0' and '9' then
     return FALSE;
     end if;
     end loop;
     if nvl(substr(parcel,9,1),'#') not between 'A' and 'Z' and
     nvl(substr(parcel,9,1),'#') != '#' then
     return FALSE;
     end if;
     return TRUE;
END;
MEMBER FUNCTION toString RETURN VARCHAR2 IS
BEGIN
return self.toString('-');
END;
MEMBER FUNCTION toString (par IN VARCHAR2) RETURN VARCHAR2 IS
BEGIN
return self.getBook||par|| self.getMap||par|| self.getItem;
END;
STATIC FUNCTION setParcel (istr IN VARCHAR2 DEFAULT '000-00-000A') RETURN prcl_ty IS
len number;
pos number;
     lastch varchar2(1);
temp varchar2(30);
invalid_format exception;
     pragma exception_init(invalid_format,-9001);
BEGIN
temp := upper(istr);
-- Find 1st occurance of '-'. If not in correct postion, pad book num with zeros.
     pos := instr(temp,'-',1,1);
if pos > 0 then
     if pos != 4 then
temp := lpad(substr(temp,1,pos-1),3,'0')||substr(temp,pos);
     end if;
-- Find 2nd occurance of '-'. If not in correct postion, pad map num with zeros.
     pos := instr(temp,'-',1,2);
     if pos != 7 then
temp := substr(temp,1,4)||lpad(substr(temp,5,1),2,'0')||substr(temp,pos);
     end if;
     -- Pad item num
     len := length(temp);
     lastch := substr(temp,len);
     temp := substr(temp,1,7)||lpad(substr(temp,8,len-1),3,'0');
     if lastch between 'A' and 'Z' then
          temp := temp||lastch;
     end if;
end if;
temp := replace(temp,'-','');
     if prcl_ty(temp).isValid then
return (prcl_ty(temp));
     else
     raise invalid_format;
     end if;
END;
END;
Rich Hall
[email protected]

You are correct in your assumptions. Client side PLSQL does not support user defined types like the one you are trying to use.
There are no workarounds I am afraid.

How to pop-up a text box for a grid item on a user defined table?

Hello,
I have a user defined table with a grid & one of the columns is for comments. What I'm trying to do is to pop up a text box when double clicking in the column field. This would be the same as the Item Details column in the Sales Order ittems grid.
Thanks,
Ron

Please post your question on SDK forum. Only SDK could meet your need.
Thanks,
Gordon

Adding user-defined number of text fields.

Okay I am having problems, obviously. I am developing a program where the user will enter X and Y values and the program will calculate the relational data. However, I can't even get a start.
First of all, the user defines the number of pairs of points they want to define. For example, they have 20 points, each with its own X and Y, so they click on 20 and then okay in the first window.
The next window will then take their answer and display X and Y text fields for as many points as they defined. However, I can't figure out any way to do this.
Feel free to run the program, the problem lies in the method setTextFields(). Help please!
import javax.swing.*;               //FOR SWING COMPONENT CLASSES
import java.awt.*;                  //FOR CONTAINER CLASS
import java.awt.event.*;            //FOR EVENT HANDLING
public class RegressInput extends JFrame
    private JComboBox listJComboBox;        //COMBO BOX TO HOLD HOW MANY PAIRS OF DATA POINTS THE USER HAS TO ENTER
    private JButton answerButton;           //BUTTON TO CLICK AFTER SELECTING PAIRS OF DATA POINTS
    private JPanel textFieldTopPanel;       //TEXT FIELD TOP PANEL
    private JPanel textFieldBottomPanel;    //TEXT FIELD BOTTOM PANEL
    private JPanel textFieldPanel;           //TEXT FIELD PANEL
    private CardLayout cardSelector;        //DECLARE CARD LAYOUT OBJECT
    private JPanel cardDeck;                //DECLARE CARD PANEL OBJECT
    public RegressInput(String title)
        super(title);               //CALL SUPERCLASS CONSTRUCTOR
        //CREATE A CONTAINER
        Container container = getContentPane();
        //INSTANTIATE CARD LAYOUT OBJECT
        cardSelector = new CardLayout();
        //INSTANTIATE PANEL OBJECT
        cardDeck = new JPanel();
        //SET LAYOUT OF CARD DECK PANEL TO CARD LAYOUT
        cardDeck.setLayout(cardSelector);
        //DEFINE LABEL FOR FIRST CARD
        Label question = new Label("How many PAIRS of data would you like to enter?");
        //BUTTON TO SUBMIT NUMBER OF POINTS TO PLOT
        answerButton = new JButton("OK");
        listJComboBox = new JComboBox( getArray() );//USE getArray() METHOD TO SET ITEM LIST OF THE COMBO BOX
        listJComboBox.setMaximumRowCount(10);       //SETS THE VISIBLE NUMBER OF ITEMS TO THE USER
        Label xValues = new Label("X Values");      //LABEL FOR X values
        Label yValues = new Label("Y Values");      //LABEL FOR Y values
        //BUILD CARD DECK
        JPanel comboBoxCard = new JPanel();     //CREATE FIRST CARD
        comboBoxCard.add(question);             //ADD question LABEL TO FIRST CARD
        comboBoxCard.add(listJComboBox);        //ADD listJComboBox TO FIRST CARD
        comboBoxCard.add(answerButton);         //ADD answerButton TO FIRST CARD
        textFieldTopPanel = new JPanel();       //CREATE TOP PANEL OF SECOND CARD
        textFieldTopPanel.add(xValues);         //ADD xValues Label TO SECOND CARD
        textFieldTopPanel.add(yValues);         //ADD yValues Label TO SECOND CARD
        textFieldBottomPanel = new JPanel();    //CREATE BOTTOM PANEL OF SECOND CARD
        textFieldBottomPanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,10));    //SET LAYOUT FOR BOTTOM PANEL
        textFieldPanel = new JPanel();          //CREATE PANEL FOR SECOND CARD
        textFieldPanel.setLayout(new BorderLayout(10, 10)); //SET LAYOUT FOR SECOND CARD
        textFieldPanel.add(textFieldTopPanel, "North"); //ADD textFieldTopPanel TO NORTH
        textFieldPanel.add(textFieldBottomPanel, "South"); //ADD textFieldBottomPanel TO SOUTH
        cardDeck.add(comboBoxCard, "Step 1");       //ADD FIRST CARD TO DECK
        cardDeck.add(textFieldPanel, "Step 2");     //ADD SECOND CARD TO DECK
        container.add(cardDeck);                    //ADD CARD DECK TO CONTAINER
        //DEFINE BUTTON HANDLER OBJECT
        ButtonHandler buttonHandler = new ButtonHandler();
        //ADD ACTION LISTENER FOR BUTTONS
        answerButton.addActionListener(new ButtonHandler());
    }//END RegressInput() CONSTRUCTOR
    //METHOD TO CREATE AND RETURN AN ARRAY OF VALUES FOR JComboBox
    private String[] getArray()
        //CREATE ARRAY TO HOLD 30 VALUES
        int numbers[] = new int[29];
        //CREATE int IN ORDER TO START THE ARRAY AT 2 INSTEAD OF 1
        int number = 2;
        //ASSIGN VALUES FROM 2 TO 30 TO numbers[] ARRAY
        for(int count=0; count < 29; ++count)
            numbers[count] = number;        //SETS EACH INDEX TO number
            number++;                       //INCREMENTS number
        }//END for LOOP
        //CREATE pairs[] ARRAY TO HOLD 30 STRINGS
        String pairs[] = new String[29];
        //ASSIGN VALUES 1 TO 30 IN STRING ARRAY FOR COMBO BOX
        for(int count = 0; count < 29; ++count)
            pairs[count] = "" + numbers[count];
        }//END for LOOP
        return pairs;//RETURNS pairs[] ARRAY FOR THE LIST ITEMS IN listJComboBox
    }//END getArray() METHOD8
    //RETURNS THE ITEM SELECTED BY THE USER FROM THE JComboBox
    private int getValue()
        //ASSIGNS STRING VALUE OF THE JComboBox TO A WRAPPER
        Integer v = new Integer((String) listJComboBox.getSelectedItem());
        //ASSIGNS WRAPPER VALUE TO int
        int value = v.intValue();
        //RETURN VALUE OF SELECTED ITEM
        return value;
    }//END getValue()
    private void setTextFields()
    {//HERE LIES THE PROBLEM! WHAT GOES IN THIS METHOD????
        for(int count = 0; count < (2 * getValue()); ++count)
    }//END setTextFields()
    //BUTTON EVENT HANDLER CLASS
    private class ButtonHandler implements ActionListener
     //PROCESS EVENT
        public void actionPerformed(ActionEvent e)
            //WHICH BUTTON CAUSED THE EVENT?
            if(e.getSource() == answerButton)
                cardSelector.last(cardDeck);
                cardDeck.setSize(600,600);
            }//END if STATEMENT
        }//END actionPerformed()
    }//END ButtonHandler CLASS
}//END RegressInput CLASSHere is main:
import javax.swing.JFrame;
public class TestSharpStats
     public static void main(String[] args)
        //DEFINE FRAME OBJECT
        RegressInput window = new RegressInput("Hi");     //SETS TITLE BAR
        window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);      //CLOSES WINDOW
        window.setSize(400, 600);    //SET FRAME SIZE
        window.setResizable(true); //PREVENTS USER FROM RESIZING WINDOW
        window.setVisible(true);     //SETS window TO VISIBLE
    }//END main()
}//END TestSharpStats CLASS

muit-post: http://forum.java.sun.com/thread.jspa?messageID=4442652

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

How do you use user defined error messages in Value Help?

Hi,
I'm currently working on a Modifiable Value Help Selector in Web Dynpro Java, and I want to use a user defined error message when I validate the values entered by a user. Currently, it's returning its default error message ("Character <string> does not match...").
Since the project requires a different error message, is there a way to override the default error message and use my defined error message instead?
Thanks!

Hi Angelo,
I am not sure why message area is showing both Custom and inbuilt messages but you can try the following:
i guess you must be using reportContextAttribute exception for showing Error messages on the input fields as well.in that case you can disable the message area so messages will appear only on the Context level ie; on input fields.
For other messages apart from validation messages you can enable the message area before reporting the exception.
make sure the boolean context variable which will be used for enabling and disabling the message area should have Readonly property set as true.
I am not sure whether this is the only solution for this but you can try and see if it works.
Siddharth

How to provide value to a User Defined field thru java code

I am using OIM 11.1.1.5.
I have a user defined field called Unique-Customer-Number. This field need to be pre-populated during user creation (using OIM Web UI) and the value comes from a java code.
Can any of you tell me the high level steps to implement this.
Thanks!
Kabi

Thanks Rajiv,
I just followed everything on metalink 1262803.1. My console shows the followings during Metadata import.
weblogicImportMetadata.bat :-
Starting import metadata script ....
Please enter your username :weblogic
Please enter your password :
Please enter your server URL [t3://localhost:7001] :t3://10.10.99.99:7001
Connecting to t3://10.10.99.99:7001 with userid weblogic ...
Successfully connected to Admin Server 'adm_server01' that belongs to domain 'server01'.
Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.
Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.For more help, use help(domainRuntime)
Disconnected from weblogic server: adm_eimsdv1s01
End of importing metadata script ...
Exiting WebLogic Scripting Tool.
How I will I know that my plugin/ event-Handler is registered successfully. Is there any screen where I can see all registered plugins ?

Adding user-defined data

Okay I am having problems, obviously. I am developing a program where the user will enter X and Y values and the program will calculate the relational data. However, I can't even get a start.
First of all, the user defines the number of pairs of points they want to define. For example, they have 20 points, each with its own X and Y, so they click on 30 and then okay in the first window.
The next window will then take their answer and display X and Y text fields for as many points as they defined. However, I can't figure out any way to do this.
Feel free to run the program, the problem lies in the method setTextFields(). Help please!
import javax.swing.*;               //FOR SWING COMPONENT CLASSES
import java.awt.*;                  //FOR CONTAINER CLASS
import java.awt.event.*;            //FOR EVENT HANDLING
public class RegressInput extends JFrame
    private JComboBox listJComboBox;        //COMBO BOX TO HOLD HOW MANY PAIRS OF DATA POINTS THE USER HAS TO ENTER
    private JButton answerButton;           //BUTTON TO CLICK AFTER SELECTING PAIRS OF DATA POINTS
    private JPanel textFieldTopPanel;       //TEXT FIELD TOP PANEL
    private JPanel textFieldBottomPanel;    //TEXT FIELD BOTTOM PANEL
    private JPanel textFieldPanel;           //TEXT FIELD PANEL
    private CardLayout cardSelector;        //DECLARE CARD LAYOUT OBJECT
    private JPanel cardDeck;                //DECLARE CARD PANEL OBJECT
    public RegressInput(String title)
        super(title);               //CALL SUPERCLASS CONSTRUCTOR
        //CREATE A CONTAINER
        Container container = getContentPane();
        //INSTANTIATE CARD LAYOUT OBJECT
        cardSelector = new CardLayout();
        //INSTANTIATE PANEL OBJECT
        cardDeck = new JPanel();
        //SET LAYOUT OF CARD DECK PANEL TO CARD LAYOUT
        cardDeck.setLayout(cardSelector);
        //DEFINE LABEL FOR FIRST CARD
        Label question = new Label("How many PAIRS of data would you like to enter?");
        //BUTTON TO SUBMIT NUMBER OF POINTS TO PLOT
        answerButton = new JButton("OK");
        listJComboBox = new JComboBox( getArray() );//USE getArray() METHOD TO SET ITEM LIST OF THE COMBO BOX
        listJComboBox.setMaximumRowCount(10);       //SETS THE VISIBLE NUMBER OF ITEMS TO THE USER
        Label xValues = new Label("X Values");      //LABEL FOR X values
        Label yValues = new Label("Y Values");      //LABEL FOR Y values
        //BUILD CARD DECK
        JPanel comboBoxCard = new JPanel();     //CREATE FIRST CARD
        comboBoxCard.add(question);             //ADD question LABEL TO FIRST CARD
        comboBoxCard.add(listJComboBox);        //ADD listJComboBox TO FIRST CARD
        comboBoxCard.add(answerButton);         //ADD answerButton TO FIRST CARD
        textFieldTopPanel = new JPanel();       //CREATE TOP PANEL OF SECOND CARD
        textFieldTopPanel.add(xValues);         //ADD xValues Label TO SECOND CARD
        textFieldTopPanel.add(yValues);         //ADD yValues Label TO SECOND CARD
        textFieldBottomPanel = new JPanel();    //CREATE BOTTOM PANEL OF SECOND CARD
        textFieldBottomPanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,10));    //SET LAYOUT FOR BOTTOM PANEL
        textFieldPanel = new JPanel();          //CREATE PANEL FOR SECOND CARD
        textFieldPanel.setLayout(new BorderLayout(10, 10)); //SET LAYOUT FOR SECOND CARD
        textFieldPanel.add(textFieldTopPanel, "North"); //ADD textFieldTopPanel TO NORTH
        textFieldPanel.add(textFieldBottomPanel, "South"); //ADD textFieldBottomPanel TO SOUTH
        cardDeck.add(comboBoxCard, "Step 1");       //ADD FIRST CARD TO DECK
        cardDeck.add(textFieldPanel, "Step 2");     //ADD SECOND CARD TO DECK
        container.add(cardDeck);                    //ADD CARD DECK TO CONTAINER
        //DEFINE BUTTON HANDLER OBJECT
        ButtonHandler buttonHandler = new ButtonHandler();
        //ADD ACTION LISTENER FOR BUTTONS
        answerButton.addActionListener(new ButtonHandler());
    }//END RegressInput() CONSTRUCTOR
    //METHOD TO CREATE AND RETURN AN ARRAY OF VALUES FOR JComboBox
    private String[] getArray()
        //CREATE ARRAY TO HOLD 30 VALUES
        int numbers[] = new int[29];
        //CREATE int IN ORDER TO START THE ARRAY AT 2 INSTEAD OF 1
        int number = 2;
        //ASSIGN VALUES FROM 2 TO 30 TO numbers[] ARRAY
        for(int count=0; count < 29; ++count)
            numbers[count] = number;        //SETS EACH INDEX TO number
            number++;                       //INCREMENTS number
        }//END for LOOP
        //CREATE pairs[] ARRAY TO HOLD 30 STRINGS
        String pairs[] = new String[29];
        //ASSIGN VALUES 1 TO 30 IN STRING ARRAY FOR COMBO BOX
        for(int count = 0; count < 29; ++count)
            pairs[count] = "" + numbers[count];
        }//END for LOOP
        return pairs;//RETURNS pairs[] ARRAY FOR THE LIST ITEMS IN listJComboBox
    }//END getArray() METHOD8
    //RETURNS THE ITEM SELECTED BY THE USER FROM THE JComboBox
    private int getValue()
        //ASSIGNS STRING VALUE OF THE JComboBox TO A WRAPPER
        Integer v = new Integer((String) listJComboBox.getSelectedItem());
        //ASSIGNS WRAPPER VALUE TO int
        int value = v.intValue();
        //RETURN VALUE OF SELECTED ITEM
        return value;
    }//END getValue()
    private void setTextFields()
    {//HERE LIES THE PROBLEM! WHAT GOES IN THIS METHOD????
        for(int count = 0; count < (2 * getValue()); ++count)
    }//END setTextFields()
    //BUTTON EVENT HANDLER CLASS
    private class ButtonHandler implements ActionListener
     //PROCESS EVENT
        public void actionPerformed(ActionEvent e)
            //WHICH BUTTON CAUSED THE EVENT?
            if(e.getSource() == answerButton)
                cardSelector.last(cardDeck);
                cardDeck.setSize(600,600);
            }//END if STATEMENT
        }//END actionPerformed()
    }//END ButtonHandler CLASS
}//END RegressInput CLASS
Here is main:
import javax.swing.JFrame;
public class TestSharpStats
     public static void main(String[] args)
        //DEFINE FRAME OBJECT
        RegressInput window = new RegressInput("Hi");     //SETS TITLE BAR
        window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);      //CLOSES WINDOW
        window.setSize(400, 600);    //SET FRAME SIZE
        window.setResizable(true); //PREVENTS USER FROM RESIZING WINDOW
        window.setVisible(true);     //SETS window TO VISIBLE
    }//END main()
}//END TestSharpStats CLASS

If your teacher taught you to program like this they should be shot. There is no need to comment every single line (especially in upper case). The comments stand out more that the code does and doesn't add any usefull information. Obviously comments are important, but you need to pick and choose when to use them.
Swing related questions should be posted in the Swing forum.
Also, don't use AWT components in a Swing application. Label is AWT. JLabel is Swing.
I would use a JTable to input the matching pairs of data. Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/table.html]How to Use Table to get started.

User defined macro in SNP PB abends

Similar Messages

Maybe you are looking for