User Defined Paper Size, Windows 7, PSC 2110 all in one printer

I am trying to print a 5x7 photo using the user defined paper size of my PSC 2110 All-in-One printer. When I used X
P os, it was easy to do. Since upgrading to Windows 7, I have been using the default drivers that load with that, but it doesn't have the ability to define paper size. Is there a driver available that would let me do this? I've tried to use compatability mode to get the original drivers from the installation disc to work, but it won't do it.

Hi,
The last update was for Vista, 5 years ago:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4220...
At this stage, Windows 7 only supplies a very basic and generic print driver for this printer just for print. You may want to keep that way or buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

Hp psc 2110 all in one printer

The printer sounds like it is stuck. I've turned it off and on and also unplugged and replugged it in. I cann't print or scan.

Hiya @jazee,
Do you see any error messages on the computer or printer? If you have a Windows operating system please run the HP Print and Scan Doctor. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
Source: Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
Once we identify the issue, you can use one of the following documents;
A 'Paper Jam: Clear Jam, and then Press Enter' Message Displays for the HP PSC 2100, 2110, 2170, and...
'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
A 'Paper Mismatch' or 'Paper too Narrow' Error Occurs While Receiving a Fax
An 'Open Door, Clear Carriage Jam, and then Press Enter' Error Message Displays for HP PSC 2100, 217...
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
A 'Scanner Failure' Message Displays on the All-in-One Control Panel and You Cannot Scan, Copy, or F...
A 'No Scan Options' or 'Scan settings are not set' Message Displays for HP All-in-One Printers When ...
'Ink Alert' or 'Low on Ink' Message Displays on the Computer or the Control Panel
The Control Panel Display Always Reads 'Initializing', or the Product Does Not Start
Low Ink Warning Message Appears after Installing a New Ink Cartridge
'Turn Power Off then On' Message Displays on the Control Panel
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How xpsdrv support user defined paper size

hi,I am developing a xpsdrv,the xpsdrv has inculde some system paper like A4.But I need paper defined by users themself.
so I add
*Option: CUSTOMSIZE
*rcNameID: =USER_DEFINED_SIZE_DISPLAY
*Name: "Custom size"
*MinSize: PAIR(1200, 4800)
*MaxSize: PAIR(32400, 19200)
*MaxPrintableWidth: 32400
*MinLeftMargin: 0
to the gpd file,but after install,no "user defined" button and no "user defined" dialog appear. the "user defined" button or "user defined" dialog should program by myself? how program user defined
paper size in xpsdrv?

This printer does not support custom size papers. We need to use only those papers which are available in the drop down for paper size in the software. Open below link to see the list of paper sizes supported by this printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02231304&cc=us&lc=en&dlc=en&product=4066377&tmp...
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Psc 2110 all-in-one, Windows Vista 32-bit,

psc 2110 all-in-one, Windows Vista 32-bit, Tried to scan and now printer will not scan or print. I have uninstalled and reinstalled and it still doesn't work. HP diagnostic said I needed a new driver and HP by passes that request.
Scanner hasn't worked very well since I put the printer on Vista. How do I get a download for a new driver from HP?

Hello 2_old ,
Please let me take a moment to say "Welcome Back" to the HP Forums.
I see that you are receiving an error message about the left ink cartridge on the printer.
It is possible that the ink cartridge is low or even empty.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If the error is still on the printer after the unit has been connected to a wall outlet, I suggest you try another cartridge.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
I hope you have a great day and thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP psc 2110 all in one and Windows 7

I have an old HP psc 2110xi all in one printer that worked fine on Windows XP. I followed the HP site instructions and did not try to load the install disc that came with it on my new Windows 7 64-bit computer. I just plugged it in and Windows 7 was supposed to have a drive for it, but there would be limited functionality of the tools per the web site.
Well actually I can now only scan to image files. The windows scan program offers only: BMP, JPG, PNG and TIF as file choices in the drop down menu. I can no longer scan to pdf files.
I have lost a lot more functionality than just not being able to see the ink level,clean the cartridges and print a test image. I am most interested in the lost ability to scan to a pdf file.
Does anyone know how I can get this back?

Hi,
Indeed the provided functionality offered by Windows Image Aquision scanning is more limited and does not PDF support.
If you Have MS Office you might be able to scan PDF files with it in some of the editions (I believe MSOffice should support WIA scanners as well):
For example, Office 2007 can provide those capabilities as you may see within the linked document.
You may also check 3rd party software (as VueScan for example) which support your scanner and provide PDF and OCR scan capabilities.
For ink level, i believe the Extended Self Test report should provide the ink levels, however i'm not perfectly sure.
You may try printing a report as following:
Press Setup and Start Color . Press the Right Arrow to scroll to Model Number and Press Enter or OK
You will not be able to get any functionality back, as te device does is not fully compatible with Windows7..
Hope it helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp psc 2110 all-in-one -best, normal fast lights just flash continually

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

hi there sorry to learn that you are having this issue.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Windows RT and HP PSC 1510 All-in-One printer connection

Hi, I have a Windows 8.1 RT tablet (Microsoft Surface 2) and a wired HP PSC 1510 All-in-One printer. Now when I plug in the printer via the USB, there is no driver that can be found to make this printer work with my device. Anyone have this problem or any solutions? I've tried looking at HP support and nothing there has been helpful.
Let me add that on the Microsoft Surface, you cannot run .EXE files which are the file types of the HP drivers.
Thanks ahead
This question was solved.
View Solution.

Hi,
I afraid the printer is not supported on Windows RT, as you may find listed within the following support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Does hp support a HP psc 1500 all in one printer

I can not print in black. I've re uninstalled and re installed my printer at least 6 times, can not find my printer which is a HP psc 1500 all in one listed therefore I used software for 1510 all in one. It prints all text in light blue. I've tried changing my printing preferences many different ways. Nothing seems to correct this problem. I've run a test page and it printed two lines in black( black print read HP PSC 1500 series and my serial number on the second line) and 3 color blocks and the rest was small squares and small lines in 3 columns. My frustration level is at an all time high. I've literally spent an entire day trying to fix this problem. Please help before I do something RASH. Thank You, Greta2

Hey @greta2,
Welcome to the HP Support Forum. I understand you're having a print quality issue with your HP PSC 1500 All-in-One Printer. I would like to assist you in resolving this and have some steps that may improve your print quality. You were correct in using the 1510 All-in-One drivers as they are compatible with your printer. Additionally, you were very diligent in approaching the problem from a software perspective - this rules out printer settings as being the most likely cause of the absence of black ink in your printouts.
From what you're describing with the test-page printout, I would recommend that you troubleshoot the issue at the hardware level. For starters, click on the following article heading and work your way through Steps 2 through 6 to better diagnose the issue:
Missing, Faded, or Dull Colors
As I suspect your print diagnostic page (Steps 3-6) will be lacking black ink in some parts as before, proceed with the following steps:
Run the clean print cartridges utility
Open the Printer Toolbox. There are two ways to do this:
Open HP Director (or HP Solution Center), select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox.
Open Printers and Faxes in the Windows Control Panel, then right-click your printer icon and choose Properties. Click on Printing Preferences. Click the Services tab, then the Service This Device icon.
The Printer Toolbox opens. On the Device Services tab, click Clean the Print Cartridges , then follow the on-screen instructions. Up to three levels of cleaning are available. Discard or recycle the page that prints.
Clean the contacts
Gather the following items to clean the cartridge and carriage:
Clean distilled water. Use bottled or filtered water if distilled water is not available. Tap water can contain contaminants that damage the cartridge.
Clean cotton swabs or any soft, lint-free material that will not stick to the cartridges (coffee filters work well).
Sheets of paper or a paper towel to rest the cartridge on during cleaning.
Open the cartridge access door and wait until the carriage is idle and silent.
Disconnect the power cord from the back of the printer.
Remove the cartridge and place it on a piece of paper with the nozzle plate facing up.
NOTE:Do not leave the cartridges outside of the printer for more than 30 minutes. If the cartridge is outside of the printer for too long, the ink can dry and clog the nozzles.
Dip a clean foam-rubber swab or lint-free cloth into distilled water, and then squeeze any excess water from it.
Clean only the copper-colored contacts
Figure : Clean the contacts
Copper-colored contacts
Ink nozzles (do not clean)
Repeat these steps for the other cartridge.
Lightly moisten another cotton swab with distilled water, and then squeeze any excess water from the swab.
Use the swab to clean the electrical contacts in the carriage, located inside the printer on the carriage slots.
Figure : The electrical contacts in the cartridge slots
Wait 10 minutes to allow the cartridge and carriage electrical contacts to dry.
Reinstall the cartridges.
Close the cartridge access door.
Reconnect the power cord to the back of the printer.
Press the Power button to turn on the printer.
Try to print a page.
If you are still unable to print, repeat these steps to clean and reseat the cartridges. Multiple cleanings might be necessary to restore printing.
Black cartridges only: remove and rest for two hours
NOTE:The procedure below will not fix missing lines or streaked bars printed by the tri-color, photo, or gray photo cartridges, or other color printing problems. Only perform the steps below if the black print cartridge has printed defective patterns, or if you notice non-uniform black text darkness.
In the black print cartridge, this problem may be caused by sediments collecting in the nozzle area. Follow the steps below to solve this problem:
Remove the black print cartridge.
If the carriage has a latch, relatch it and then close the printer - this is important. If the printer is not closed, it cannot adequately protect the remaining tri-color cartridge.
Place the cartridge on a level surface with the nozzles up (label down).
Figure : Cartridge with the nozzles up
Allow the cartridge to sit undisturbed for two hours.
Reinstall the cartridge and print another self test page.
Click the Windows Start button, then click Control Panel.
Double-click the Printer and Faxes folder.
Right-click the icon for your printer and choose Preferences.
Choose the Services tab and click Service this Device. The printer Toolbox opens.
On the Devices Services tab, click Print a Diagnostic Page.
Look for defects on the page.
If the self test page shows no defects for the black cartridge, and if the cartridge was new, align the cartridge. To align the cartridge, follow the steps below:
Load fresh, white paper.
Click the Windows Start button, then click Control Panel.
Double-click the Printer and Faxes folder.
Right-click the icon for your printer and choose Preferences.
Choose the Services tab and click Service this Device. The printer Toolbox opens.
On the Device Services tab, click Align the Printer.
If the cartridge was not new, there is no reason to align the printer.
If the page still shows defects, go to the next step.
Replace the problem cartridge
If a cartridge replacement was not tried previously to solve this problem, replace the problem cartridge now. Click here (c00206040) (in English) to see if the cartridge is covered under warranty.
Source: http://support.hp.com/us-en/product/hp-psc-1510-all-in-one-printer-series/428822/model/428823/docume...
Let me know the result of your troubleshooting by responding to this post. Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

Hp psc 1210 all in one printer feeding error

I have a model 1210 all in one printer and it will not feed paper. it sounds like something its working, but not gripping the paper. PLEASE ADVISE

Hello @anne0701 , and welcome to the HP Forums!
I can see you're experiencing paper feed issues. I would like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps in this video on PSC feed issues:
Fixing Paper Pick-Up Issues - HP PSC 1200 All-in-One Printer
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP PSC 1310 All-in-One Printer

Hi
I need to download the the full set of drivers & software so i can install them on a friends computer who does not have a internet connection yet and will not for a while yet..
the only ones i can see need to connect to the internet to download the drivers..
Printer = HP PSC 1310 All-in-One Printer
Operation system = Windows 8.1 x64
PS: Why do printer companies make it so difficult to download the full set of drivers\software when people have spent good money buying there printers.... i get asked this question a lot but people....
thanks
We all make mistakes said the Dalek climbing off the Dustbin.

Hello,
Full feature driver is available for download for this model. Please select the OS from the drop down list first and then select next to download the driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3745...
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

User Defined Paper Size, Windows 7, PSC 2110 all in one printer

Similar Messages

Maybe you are looking for