User defined step for polling data

Hi,
I'm creating a User Defined VI to be called from SignalExpress, that needs to poll a serial device for data.
The serial device makes new data availiable in a register-array at a rate of 10Hz, and uses an additional register as a "message ID" to indicate when new data is availiable.
This means that my VI needs to poll this MessageID, and when it increments, I can read the register array into a waveform and return it to SignalExpress.
Now, what is the best/correct way of writing this VI in regard to the polling wait time?
I see two options here for the case when my VI is called and it detects that no new message is availiable:
It immediately returns to SignalExpress ("non blocking").
In this case, should I return an empty waveform or the previous waveform?
(I do not want duplicated data logged in SignalExpress)
It blocks the SignalExpress loop where the user defined step is placed, by waiting in my VI until a new message arrives, and then returns this new data in a waveform.
My user defined step is placed in a separate loop in signal express so the blocking in case 2 should not affect other DAQ loops in my SignalExpress project, right?
/LeifS

I don't think it is directly possible for changing this at the front end level.
You might need to make changes in some SE24 Classes

Similar Messages

UDF(user defined function) for standard date transformate function,

Hi All,
Hope you are doing good !!!
I have a requirement where i need to write an UDF(user defined function). Please help me in writing the code for below logic-
I am getting my Input as 111213 where 11 denotes HH 12 denotes mm 13 denotes ss. I need ti insert : between hh:mm:ss
Please help me achieving a code for below logic
I have used standard date transformate function, there i am getting spaces as separator in my input resulting an errors i am sending without spaces.
Regards,
Vijay Kumar.

Hello,
I am getting my Input as 111213 where 11 denotes HH 12 denotes mm 13 denotes ss. I need ti insert : between hh:mm:ss
Please help me achieving a code for below logic
I have used standard date transformate function, there i am getting spaces as separator in my input resulting an errors i am sending without spaces.
What do you mean by spaces? Can you try the mapping below?
inputDate -> replaceString -> dateTrans(inputDateFormat: HHmmss outputDateFormat: HH:mm:ss) -> target
Constant: -> /
Constant:-> /
Hope this helps,
Mark

User Defined Steps / Version conflicts

Hi folks,
I am trying to get warm with my brand new software packages LV 8.6 and SignalExpress 3.0
In particulary I want to create a "user Step" in SE (SignalExpress) which means using a LV Vi in SE.
In SE I must select which LV version the VI was written with. The selection allows several Versions up to 8.5, but not 8.6.
I do not have any of the supported oder versions. When I use the "save as oder version" in LV, SE still does not accept the VI as user step.
I have read through the description "Creating SignalExpress Plug-Ins with LabView", but that did not really help me out. The paper is well written, but somewhat outdated.
Anyone who has a suggestion for me?
Thanks
Gerd

Hi Gerd,
the Sound and Vibration Assistant extends Signal Express to provide specific sound and vibration measurements and analysis.
Usually the latest LabVIEW version is supported. When version 6.0 has been released LabVIEW 8.5 was the latest. - So I assume you have version 6.0.
In version 7.0 LabVIEW 8.6 is supported - just tested.
Have fun with Signal Express and a nice weekend.
With best regards
Ralf N.
LabVIEW SignalExpress Data Types:
http://zone.ni.com/reference/en-XX/help/371268J-01/expresswb/datatypes/
Passing Data to a LabVIEW VI in SignalExpress
http://digital.ni.com/public.nsf/allkb/CAD7D7DAF2C8EA9C8625709000595594?OpenDocument
VI Guidelines for User Defined Steps In SignalExpress
http://digital.ni.com/public.nsf/allkb/16C5D8013AD8EDF486256FFE007B19BC?OpenDocument
Message Edited by ralfn on 01-16-2009 09:50 AM

User Defined Transaction in Logical Data Service

Hi
I have few physical data services created from database store procedures. I've corresponding logical services for each of the physical data services.
Now I've created a logical data service that calls 2 store procedures & trying to update this 2 store procs in a single transaction.
Also I dont have a read operation in my logical data services. In this case both store proc. should take part in a single transaction & should commit or rollback as per success/failure.
I tried testing this scenario & it fails. ALDSP was able to update first store proc. but there was an error in second store proc. so it should have rollback the entire transaction.
Is there any way that we can have user defined transaction in logical data service?
My Scenario:
InsertData(RequestA,RequestB) as response
res1 := call First Store Proc (RequestA) ;
res2 := call Second Store Proc (RequestB);
response := res1 + res2
So my question was is it possible to define user transaction before making calls & have commit/rollback define around it.
Apprecaite for your help!
Thanks
Pash

I have assumed that you realize you need XA drivers for this. What is the exception you see? Something about "mixed outcome"?
But in the case of store procedure, we cant drag & drop physical ds into logical ds. Why?Since your stored procedure updates, it should be defined in the physical ds as a "procedure" not a "function" - it sounds like it is. (procedure means it will update, function means it will not - not that it is a "stored procedure"). Because it updates it cannot be called by an xquery function because xquery is by definition read-only. It can only be called directly from the client, or from another procedure (which is XQSE, not Xquery). If you created a logical ds with a "procedure" - you could drop your procedure into that.
created a new library procedure in which i am calling 2 physical ds assuming it will be executed in a single transaction. But it does not. Please verify.
But it does not. Please verify.I won't verify it because it is not correct. It should be treated as though it is one transaction. And barring the bugs with JNDI/data source names and multi-data sources, I do not know how how it would not be. So either there is a misunderstanding or a new bug.
Either way you need to open a case with customer support to resolve this. When you open your case, the more information you provide them with (i.e the smallest possible dataspace that will reproduce the problem along with DML to create the stored procedures and the tables that they use, and also any/all exceptions/stack traces and server logs).
- Mike
ps. there are no means to explicitly create a transaction in ODSI.

User-defined fields for WBS

Hi,
Std SAP provides the following user-defined fields for WBS.
4 numeric fields
4 general fields
2 date fields
2 check boxes
We would like to use as many as 20 numeric user-defined fields for wbs.
Is there a way to do this?
Thanks in advance.
Manohar

hi,
It is not possible with user defined fields. You can achieve this using SPRO menu path Project System ->Structures->Work Breakdown Structure->Enhancement for Project Definition WBS lements -> Create customer specific fields in WBS.
You have to use enhancement CNEX0007 to create the required fields.
You will, ofcourse, need the help of an ABAPer to do this.
Muraleedharan.R

Create User-defined field for Marketing Documents

I need to create a User-Defined field for Marketing Documents under Title and Rows.
I need to do it via .NET instead of manually go into SAP to create it.
Does anyone can give me idea on how to do this?

Hi David,
There are examples of how to do this in the SDK samples (look for MetaDataOperations project in the DI samples).
There are also examples in the SDK help. Here's one:
Private Sub AddUserField()
'// The UserFieldsMD represents a meta-data object that allows you
'// to addremove fields from tables or change the fields' characteristics
    Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
'// In any meta-data operation there should be no other object "alive"
'// but the meta-data object, otherwise the operation will fail.
'// This restriction is intended to prevent a collisions.
    '// The meta-data object needs to be initialized with a
    '// regular UserFields object
    Set oUserFieldsMD = oCompany.GetBusinessObject(oUserFields)
    '// When adding user tables or fields to the SAP Business One database
    '// use a prefix identifying your partner name space
    '// this will prevent collisions between the various partners add-ons
    '// SAP's name space prefix is "BE_"
    '// Set the Fields' mandatory properties
    oUserFieldsMD.TableName = "OCRD" '// BP table
    oUserFieldsMD.Name = "BE_UserField1"
    oUserFieldsMD.Description = "A user field"
    oUserFieldsMD.Type = db_Alpha '// am alphanumeric type
    oUserFieldsMD.EditSize = 20
    '// Add the field to the table
    oUserFieldsMD.Add
End Sub
Kind Regards,
Owen

User - defined functions for calculating the taxes of state and country

hi expects,
how can write user-defined function in message mapping in which i want to calculate the states taxes (2500) and country taxes (5000) and give the result as grand total in output.please help me?

Hi,
Activities
1. To create a new user-defined function, in the data-flow editor, choose Create New Function (This
graphic is explained in the accompanying text), which is located on the lower left-hand side of the
screen. In the menu, choose Simple Function or Advanced Function.
2. In the window that appears, specify the attributes of the new function:
Name
Technical name of the function. The name is displayed in the function chooser and on the data-flow
object.
Description
Description of how the function is used.
Cache
Function type (see above)
Argument Count
In this table, you specify the number of input values the function can process, and name them. All
functions are of type String.
3. In the window that appears, you can create Java source code:
a. You can import Java packages to your methods from the Imports input field, by specifying them
separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since
all message mappings require these packages and therefore import them. You should be able to
access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the
package under Import. In other words, you do not have to import it as an archive into the Integration
Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the
SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as
archives and that are located in the same, or in an underlying software component version as the
message mapping.
b. Create your Java source text in the editor window or copy source text from another editor.
4. Confirm with Save and Close.
5. User-defined functions are limited to the message mapping in which you created the function. To
save the new function, save the message mapping.
6. To test the function, use the test environment.
The new function is now visible in the User-Defined function category. When you select this category,
a corresponding button is displayed in the function chooser pushbutton bar. To edit, delete, or add the
function to the data-flow editor, choose the arrow next to the button and select from the list box
displayed.
Regards
Seshagiri

How to create user defined metrics for SQL Server target?

The customer is not able to create a user defined metrics for SQL Server target.
This is very important for him to use this product.
He is asking how to create user defined metrics?
I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
But it would work for an Oracle DB, but his target is SQL Server DB
Not able to find the "User-Defined Metrics" link from Database home page.
How to create user defined metrics for SQL Server target?

http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm

Problem creating user-defined metric for Database

I am logged in to EM/Grid Control as SYSMAN, any user with superadmin privileges or a 'normal' user with operator/full privileges for my database target. When I go to set up user-defined metrics for the target db I get the following warning "You will only be able to view User Defined metrics because you do not have Operator Privileges on host <db target name>". The Create button is disabled.
Can anyone offer any advise on where to identify the privilege problem?
Thanks

Well I did it with a host UDM calling a local script (which will be installed on shared drives for the development/test and production systems).
The local script cats the /var/opt/oracle/oratab file eliminating lines beginning with # or $ then takes the second argument of each line and loops through all entries using a checkit procedure. The checkit procedure determines if the appropriate log directores exist for the oracle home and does a find on the diretory looking for alert*.log and *.trc. If there are any then global variables get updated with the count and directory name.
There is an if statement before exit that checks of the count of files is greater than zero and write an appropriate em_result and em_message depending on the results.
I then created the UDM in EM to call this script and check for critical/warning thresholds.
Regards
Tim

User defined fields for the Trading partner agreements

Hi,
Do we have any provision to create custom/user defined fields for the Trading partner agreements ?

Hello,
It would be great if you can provide complete details of your use case. I can suggest the possible way of implementation only after understanding your requirement.
Regards,
Anuj

Cannot Apply User Define Serial for ITEMS

hi ,
we have to generate user define serial # for items . for that we need to upload the MAC addresses as serial number from a excel spread sheet can any one help regarding that please
Thanks & regards
Moni.

Moni,
You have to do some coding to achieve this:
1. Create a table with three columns like serial_id, serial_number,taken_sts.
2. Load your serial numbers from spreadsheet to this table using an insert or SQL Loader.
3. Oracle gives you this package user_pkg_serial with nothing coded in package body. Add your logic to this body to return only one serial number at a time. That is the reason I asked you to create table with three columns. Maintain taken_sts column as N for only one serial number at a time and return that serial number (out parameter of the package body).
4. It is extremely important to return the x_return_status as 'S' otherwise this will not work.
5. Run the Generate Serial Numbers program and your serial numbers can be seen in the mtl_serial_numbers table.
Please let me know if you need more info.
Thanks
Nagamohan

User defined rule for missing triples

Hi,
i would like to know if there is a way to define a user defined rule for triples that are not contained in a model. With curly brace syntax it could be something like this:
INSERT INTO mdsys.semr_validation_rb VALUES(
'test_rule',
'{?s ?p ?o. OPTIONAL{?s rdf:type ?t}}',
't is null',
'(?s <hasType> "false")',
null);
Unfortunately this is not working. Has anybody a suggestion to solve this problem with user defined rules?

Hi,
This is related to the following post.
built-in primitives(noValue,remove) for user defined rules
Note that there is something you need to pay a bit attention to.
Say your original graph contains
:John :fatherOf :Mary
but not any type classification for :John (i.e. no match for {:John rdf:type ?t})
Assume you add the following triple according to the rule you described
(:John <hasType> "false")
Now, what happens if :John is classified as a :Person (or :Parent, :Father),
do you want to withdraw* :John <hasType> "false"?
Thanks,
Zhe

User Defined Metric for default ALERT log directory

On our system we have moved the alert log to a non-default location. If we use the wrong initialization file or something else goes haywire then trace files and alert logs get placed in the $ORACLE_HOME/rdbms/log directory.
I want to create a user defined metric for each machine that will look in all the $ORACLE_HOME/rdbms/log directories for each ORACLE_HOME on the server checking for any alert*.log or *.trc files. Creating an alert if it encounters any of these files.
I don't know if I should do it as a host UDM or an instance UDM. And more to the point how do I get it to see the multiple homes if the server has more than one.
Any ideas would be appreciated.
Thanks
Tim

Well I did it with a host UDM calling a local script (which will be installed on shared drives for the development/test and production systems).
The local script cats the /var/opt/oracle/oratab file eliminating lines beginning with # or $ then takes the second argument of each line and loops through all entries using a checkit procedure. The checkit procedure determines if the appropriate log directores exist for the oracle home and does a find on the diretory looking for alert*.log and *.trc. If there are any then global variables get updated with the count and directory name.
There is an if statement before exit that checks of the count of files is greater than zero and write an appropriate em_result and em_message depending on the results.
I then created the UDM in EM to call this script and check for critical/warning thresholds.
Regards
Tim

User defined function for getting last string in the line

Hi Experts,
I am not java expert, can anyone give me user defined function for getting last string in the line.
for example if the source field is "NEW ARBOUR SQUARE" i want to pass to target field only last string that is "SQUARE"
please help me out of this.
Kind Regards.
Praveen.

You don't even need a UDF for this. In the graphical editor look for the standard functions and once you do a scroll over on 'text functions; you will find what you are looking for.
Just a piece of advice, try keeping UDF's to minimum unless really required or it is complicated without it.
regards

Advance Queue - Define schema for Events Data

Hi All,
we want to implement oracle Advanced Queue within BPEL processes. and i want to create a Publish Event document.
now I want to define schema for events data. can anybody point me to such schema ?
Thanks,
pp

Hello,
We are using Jdeveloper 10.1.3 / oracle 10g / Oracle Fusion Middleware (BPEL) 10g and want to create a sample POC using BPEL process, any kind of Publish Event sample schema, Publish Event sample XML, Advance Queue adapter in jdev and be able to publish (enqueue) messages on sample AQ and be able to consume those messages (dequeue) by subcriber.
as you see, this is just a sample POC .... nothing concrete as yet.
I searched "Oracle By Example" for such sample code or zip that i can download. but did not find one.
Can you point me to such sample code, i can open in jdeveloper and test ?
thanks
pp

User defined step for polling data

Similar Messages

Maybe you are looking for