User deleted, data not saved

My administrator deleted my account and made me a new one to fix a printing problem. The printing problem is fixed, but all my files are gone. From what I can gather when she deleted my old account she did not choose to save the files (there is no 'deleted user' in the user folder, and no disk image). I tried to use a program to recover deleted files but it found nothing. I used Virtual Lab. Any ideas on where the data could be, and how it might be recovered? The files are primarily rtf and doc.

Most recovery programs are set up so you can read pretty much any drive. They are set up so even if your drive won't mount normally and is in its last moments you can sometimes read data. If you're not seeing files after a simple removal of a user account that's what makes me wonder if some extra step was taken. Deleting an account usually places the old account files in a special folder in deleted users. This still takes up space on the computer so your admin. may have decided to move it to the trash and empty the trash to free up the space. Even then recovery tools should be able to see file remnants (emptying trash just removes all normal reference to the files but the data stays there and can be seen by those special programs) on the drive. There's two reasons (I can think of) for their not being there. One, somebody used secure erase. Two, your computer sees such heavy use that the the space now regarded by the computer as being available was overwritten by other file creation. Ask your administrator if they are in the habit of using secure empty trash. The second case might apply if your computer sees a lot of file creation and you don't have a lot of room on the hard drive so any free space stands a good chance of being randomly used.
I haven't actually used one of those recovery programs I am also thinking of something I have heard with reference to those programs and that is sometimes the programs will find files but the names are no longer available. I have heard of people recovering lots of files from bad drives but then having to face putting names on all the files again. I may be wrong on this, but maybe you're seeing the files but not recognizing the,. Maybe somebody else with experience using those programs can provide information.

Similar Messages

Manual Layout data not saving to trx cube

Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWer

Hello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil

Xserv - user settings are not saved - help!

I've noticed that user settings do not get saved under OS Xserv...
Whenenver I login I get the default dock, with all the admin icons missing!
The desktop is saved in the root as /desktop/. (?!?)
When the machine was installed the first user was setup as Administrator (Admin) but it was deleted (against my sound advice) and since then things like the FTP server malfunctioned... The keychain seems to pop up a lot as well, and can't be opened / used. And the bookmarks don't get saved as well.
I'm assuming that user settings like the Dock should be saved somewhere.
Please help!
Everything else seems to be running but loosing all UI configurations at log-offs is taking a lot of time which I currently don't have enough of.

Anyone?
I was hoping that I'd get an answer through the forums.
I'll wait till next week and if there's still no post I'll contact Apple's Phone support.
Please post any suggestions - a Mac Server shouldn't be so fragile!

User mapping is not saved

Hi All,
i am doing user mapping in personalization window,
if i am enter my user id and password after that if i am click on save button, the logon data is not saved, so pls solve my problem.
Regards,
Jagadish Babu Kanikanti.

Hi ,
I am configuring a production Server with SP14.
When i am in user mapping section, i find the error msg as below:
There is a configuration issue which leads to problems when accessing user mapping data for the selected backend system 'ESS'. Usually, the reason is user mapping being configured for strong encryption, but the necessary additional files being missing. Check the security log file for further information and hints on how to solve the problem.
I am not able to enter any user id / pwd ; The fields are greyed out.
I did solve the same in the development server using :
Goto System administration-system Configuration-UM Configuration-Direct Editing.
In that make the ume.usermapping.unsecure as TRUE.
But on seeing your reply stating this is not suitable for Production server, i am bit confused.
Can you pls help with me an alternate solution..
Thanks in advance,
venkat.

Data not saved in database

hi,
i'v a prob. that once i create quation through va21 then it create and saved data.
now when i create sales order through va01 then it show data saved and gave the sales order no.
but when i 'm going to change it then message comes order not in data base.
when i saw the data in table like vbak/ vbap then i found no data.
what is the prob.
pl. help me.
mukesh

Hi Mukesh,
May be the data is not saved at all. Use TCODE SM12 and SM13 to check if there are entries for the corresponding table under processing
Regards

Response data not saved in PDF

Dear All,
I created an interactive form with a web service. I filled in the form and sent all the datas in SAP through the web service.
All worked properly except that I have a return message from SAP. This message is binded in my form as response field.
I saw my message in the form when the WS is finished but I saved the PDF on my PC.
When I look at my PDF later, the return message is disappeared, it is not saved in my PDF as all the other fields.
Thanks to help me
Kind regards
Véronique.

Dear all,
Can someone help me ?
All the other data are saved in the document. But I think that it is because the return message is not keyed but is only a answer in the web service, the PDF can't save it ?
If I change the field (add some character after the return value from SAP) and I save, the value is kept.
Could someone tell me how to do ?
My button is an Execute one with the data connection on my web service.
If I re-merge data, all the fields become empty except the response return message. Even in this case, the message is not saved in the PDF.
It is important !
Thanks
Kind regards
Véronique

Hierarchy Data not saved after Hierarchy Load

Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
Abhishek

Abhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks

Data not saving in Custom Infotype

Dear Experts,
I have created a custom infotype, 9003, for this I creates a structure ps9003.
And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field.
Now this key field was not coming in the infotype screen, so I added it using screen painter.
But now when I save the data the data is not saved in this key filed.
Please Suggest.
Warm Regards,
Upendra Agrawal

Hi
As of my knowledge the primary key for the PA infotypes will be MANDT+PAKEY structure. What is the need of adding the primary key.
- While creating the custom infotype using PM01 screen will be automatically generated for the fields declared in PS structure
- Screen Generation will wipe out the custom written on the fields so this is to be carefully handled.
- if you added the field check logic in PAI & PBO
- Check are you passing the data back to the infotye structure

Data not saving in flowable form

Hi,
I have created a form where there are flowable and positioned parts. In the attachment section, data entered into Attachment A (flowable) seems to save, but after saving, closing and re-opening, the data has not saved. The data entered into Attachment B and the rest of the form does save.
Can I send the file to someone to have a look?
Thanks.

Please send your form to [email protected]
I will try to look into the issue..
Nith

File- XI- IDoc: Idoc header data not saved correctly

Hi guys!
I have a very strange problem:
I have a file to xi to IDoc scenario. Everything seems to be fine, IDoc is created in target system, but with strange error: <MESCOD>XX</MESCOD> segment is not written in IDoc header segment. This segment is available in message sent to ECC (after mapping), so there is no problem with ommiting the segment in mapping. But it's not saved.
This scenario worx fine in QA, but not in PRO.
Any ideas, what to look at?
Thanx a lot! Olian

Hi,
check the IDoc which was in PROD. and see the ibound status and actual reason .
depending upon the actual status you can resolve the issue.
Chilla

User color choice not saved in export preset?

I'm currently writing my first plugin and still in a learning curve.
My export plugin has a color_well control to choose a color. I have defined a default value of LrColor(1,1,1) which works well.
However, the chosen color is not saved so every time the export dialog is used, it comes up with the default color value and the previously chosen color is lost.
What am I doing wrong?
Thanks,
Mario
Code snippet:
myPlugin.exportPresetFields = {
    { key = 'borderColor', default = LrColor(1,1,1) },
    ...more keys
function myPlugin.sectionForFilterInDialog( viewFactory, propertyTable )
    return {
        viewFactory:row {
            viewFactory:color_well {
                value = LrView.bind('borderColor'),
end

Many thanks for the reply and sorry for the delay. It took me DAYS to figure out how to save the r,g & b components.
Finally, I succeeded with this method:
myPlugin.exportPresetFields = {
    { key = 'color_r', default = 1 },
    { key = 'color_g', default = 1 },
    { key = 'color_b', default = 1 },
function myPlugin.sectionForFilterInDialog( viewFactory, propertyTable )
    return {
        viewFactory:row {
            viewFactory:color_well {
                value = LrView.bind({
                     key = 'borderColor',
                     transform = function ( value, fromTable )
                          if fromTable then
                              return LrColor(propertyTable.color_r, propertyTable.color_g, propertyTable.color_b)
                          else
                              propertyTable.color_r = value:red()
                              propertyTable.color_g = value:green()
                              propertyTable.color_b = value:blue()
                              return LrBinding.kUnsupportedDirection
                          end
                     end
end

Adobe form not saving user-input data into saved pdf file

Hi forumers,
I'm a new abap developer and I'm tasked to create an interactive adobe form that will require the user to input data in the form.
No data is passed and received from PDF, but PDF has to be u2018Fillableu2019. I am able to fill out the form but when I actually save the form, it will be saved as a blank form again. I've seen the relevance of the LS_DOCPARAMS-FILLABLE = 'X' on this forum and I have incorporated it in my code. But how should I code the abap program to enable to save the user input as well into the form.
DATA: GV_FMNAME TYPE FPNAME,
 LS_DOCPARAMS TYPE SFPDOCPARAMS,
 LS_OUTPUTPARAMS TYPE SFPOUTPUTPARAMS.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
 I_NAME = 'ZSC_ZRUFORREP'
IMPORTING
 E_FUNCNAME = GV_FMNAME
* E_INTERFACE_TYPE =
* EV_FUNCNAME_INBOUND =
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
 IE_OUTPUTPARAMS = LS_OUTPUTPARAMS
EXCEPTIONS
 CANCEL = 1
 USAGE_ERROR = 2
 SYSTEM_ERROR = 3
 INTERNAL_ERROR = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LS_DOCPARAMS-FILLABLE = 'X'.
LS_DOCPARAMS-DYNAMIC = 'X'.
CALL FUNCTION GV_FMNAME
EXPORTING
 /1BCDWB/DOCPARAMS = LS_DOCPARAMS
* IMPORTING
* /1BCDWB/FORMOUTPUT =
EXCEPTIONS
 USAGE_ERROR = 1
 SYSTEM_ERROR = 2
 INTERNAL_ERROR = 3
 OTHERS = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
 USAGE_ERROR = 1
 SYSTEM_ERROR = 2
 INTERNAL_ERROR = 3
 OTHERS = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
dgrachee

Not quite yet, I have to say...
If you check the domain "FPINTERACTIVE", you'll see these values:
 Print Form
X Interactive Form with Additional Usage Rights
N Interactive Form Without Additional Usage Rights
F
So, you are not providing "additional usage rights" (Adobe Form Credentials), meaning there could be a problem when you want to use those forms in a Production environment.

Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

Hello all,
I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields.
So, my question is how do I handle line selection in the context of these BAdIs? Is there a way to know which lines have been selected and then only change the data in those items?
I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet.
I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N. However, I haven't found a way to work with it. It doesn't get passed to any of the methods in the BAdIs, as far as I know.
January 27, 2012 **************
We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI. The lines are in the lt_models table.
So, now my issue is getting data to save in ME22N. When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save. It does work when I make a change in another field, like changing the description for instance. I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work.
I'm getting the idea that I'm the first ABAP developer to try this...
Thanks for any help.
Kind Regards,
Chris
Edited by: Chris Mowl on Jan 11, 2012 10:33 AM
Edited by: Chris Mowl on Jan 11, 2012 4:24 PM
Edited by: Chris Mowl on Jan 27, 2012 10:57 AM
Edited by: Chris Mowl on Jan 27, 2012 2:00 PM

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

User Settings are not saved

Hello,
I am setting the values in User settings. It is sucessfully changedand saved, but the changes are not appearing while creating the shopping cart. In pposa_bbp also the value is maintained as default.
We are in SRM 5.0 classi scenario. Please let me know how to overcome this issue.
Regards,
Chary

Hi
Please try saving the user defaults in Web page by using
the transaction BBPUM01 / BBPUM02 for saving user defaults.
In a productive EBP environment, you should run the program
CRM_COM_ORGMAN_BUPA_INTEGRATE on a regular basis, in
order to carry out automatic periodic matching.
Alternatively, as Disha told, try executing the report as well.
Incase it does note helps, please raise an OSS message with SAP.
Regards
- Atul

Multi-Select (drop down list) data not saving upon save/email

I have created a drop down list and modified it to allow multiple selection, i.e.
form1.BusinessAreaTable[1].Row1[4].ERP::ready:form - (JavaScript, client)
this.ui.choiceList.open= "multiSelect"; this.rawValue
= "-1"
However, when I go to save the form and/or email the list fields erase and the data / items I selected are gone.
Please help, thanks.

Okay, I have the form now.
You are using script in the form Ready event to make a dropdown list mimic a listbox. This is totally unnecessary. I have changed the ERP to a multi-select listbox in the Object > Field palette and commented out the script.
Here is the form: https://acrobat.com/#d=K*P4xKIA4kkqEHGTpgyvvw
The form has not been Reader Enabled, so user with Reader will not be able to save the data inputted or submit by email in PDF format:
Summary here:
http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
Niall

User deleted, data not saved

Similar Messages

Maybe you are looking for