User description after the user was deleted
Hello,
Im not a basis expert but have a theoretical question.
If I had a user named DAN_A, which is not working anymore in the company and I want to delete the user because I dont want to pay for its license. In a few years I would like to know that DAN_A was Dan Anilevich . Is there a way to archive its name?
Please Advice,
Amir
Hi Amir,
Maybe this info can get you started :
Tcode SU80
or read this to start off with :
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e6fc0462a11d189000000e8323d3a/frameset.htm
Similar Messages
-
"Internet Explorer Branding failed..." even after the GPO was deleted
Our environment is Server 2008 R2 on all servers and Windows 7 Pro 64bit on workstations. Both servers and workstations are on IE10. When running RSOP on the servers we get the following message under the User section:
"Internet Explorer Branding failed due to the error listed below. The specified procedure could not be found."
I found that a GPO still applied IE settings through Internet Explorer Maintenance. I've since created a new GPO using GPP and deleted the old GPO. The problem is that the error still appears when running RSOP.
How can I remove these old GPO settings?Hi,
Before going further, we need make sure that whether there is another GPO with Internet Explorer Maintenance settings configured
has been applied to the machine.
Besides, I want to confirm with you that whether the old GPO has been unlinked and permanently deleted. In order to narrow down
the cause of the issue, I suggest we could collect the following information.
GPMC.log
==================
a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please
place appropriately). (Choose computer and select the proper user in the wizard)
c. Right click the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML
file.
Once you get the report,
you may upload it to the Skydirve and provide me the download link.
In addition, after running GPupdate /force command, please try to logoff and re-logon to see what will happen.
Best regards,
Frank Shen -
my computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.
slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide -
The report generation toolkit didn't work after the vi was build to an application.exe
I write a VI using LabVIEW Report Generation Toolkit , it really works in the LabVIEW7.1 and 6.0 enviroment. but after the VI was build in to an application.exe, the LabVIEW Report Generation Toolkit didn't work even the application runs.
thanks for your help.You might want to follow the procedure here:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
(If the URL doesn't work, you can search for NI document ID: 2B87TVI8)
Dan -
I had to upload itunes on a new computer and after the iphone was updated my music was not on my phone and i don't see any music on my itunes any suggestions
iTunes- How to move your music to a new computer
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
-
Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.
Hi Benjamins,
I've checked your account—you have two ExportPDF subscriptions. One placed on October 20 2013, and the other placed on October 11 of this year. So, you were probably charged the auto renewal for the subscription placed in 2013, and then the new charge for this year's order.
Please Contact Customer Care so that an agent can help get things situated for you. There's no reason to have two subscriptions to the same service, so an agent can help you cancel one, if you'd like.
Best,
Sara -
I just downloaded a video in HD, but I found out after the download was over my computer doesn't play HD videos. Is there any way I can return the video and get the SD version, or upgrade my computer so it will play the HD video?
From http://support.apple.com/kb/HT3209
When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page. Conversely, if you purchase an HD video on an unsupported device, the SD version will be downloaded. Then, you will need to download the HD version from your Purchased page. Learn more about downloading previous purchases. -
Can be done restore from an earlier backup if the backup was deleted?
can be done restore from an earlier backup if the backup was deleted? restoring from backup is lost application
No, you cannot restore from a deleted backup, because the backup is deleted. It therefore no longer exists.
Just re-download the lost app from the AppStore. -
I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?
Synch them back from whatever contact manager or cloud service you stored them in.
-
HI,
NEED URGENT HELP !!
I installed the updates for i photo as suggested by the software updates and then restarted as displayed on the screen for successful installation . But after the restart was done , the system again displayed a grey window that says to restart in different language. I'm worried and could not understand that why this is happening as i only update what mac recommended .Moreover , I'm new to mac book and therfor i'm finding few things difficult to understand. Any help or suggestion is welcomed and much appreciated.Please reply !!Troubleshooting: My computer won't turn on
Mac doesn't boot -
My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?
Lilasil wrote:
The message displayed suggests to return the iPhone to factory settings (which I cannot do).
Why not? -
I had a friend airdrop a video to me last week from her iPhone and I saw it on my iPhone after the upload was complete. I'm looking for the video now and can't find it anywhere on my phone. Where is it and/or is it stored on my phone?
I airdropped the video again and it now shows up in my camera roll.
-
How do you recover / restore the App Store Icon on my iPhones. The icon was deleted when I upgraded to 6????
The App Store cannot be deleted...
Check in All Folders and on All Pages/Screens...
Check in Restrictions...
Settings > General > Restrictions
If no joy...
Settings > General > Reset > Reset Home Screen -
I have been trying to download Adobe Air for a website I'm trying to access (Colonial Williamsburg). After the installation was finished, I went back to the website and it still said I didn't have Adobe Air. I tried reinstalling and Adobe said I already have it on my system (Mac OSX 10.9). I can't find the app. I uninstalled, restarted, etc. and same results.
Thoughts anyone?Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer
Maybe you are looking for
-
How do I REINSTALL LaserJet 200 Scanner software to a DIFFERENT drive?
I have a Laserjet 200 M276nw. For some reason Drive D: got corrupted and I cannot either uninstall or install to this drive any longer. Drive D: is an extension to Drive C:. It is on this drive D: that the original printer software resided. My scanne
-
Macbook CD drive does periodic "seek" even when PC is asleep
My Macbook will be "fast asleep", the power light will be slowly pulsating, the machine has been inactive for so long that opening the screen does not revive the PC, you actually have to touch the power button to revive it, yet (it is in my room near
-
Multi-Master Replication Limits
I'm starting new project and would like ask your opinion. They like to have multi-master replication of a single table between Chicago and Denver. A record could be written in Denver, then same row read in Chicago. The opposite is also true. Replicat
-
Gantt Chart in Service Resource planning
Hi All, I want help on Gantt Chart.I want to modify the gantt chart .can anybody tell me plaese where we can chage the gantt chart.My basic requirement is that i want display the multiple line in tooltip.currently his display the aal the d
-
Email alert if SQL Server Services stop abruptly
Hi, I am a SQL Server DBA and I am currently working on setting up email alerts in case if SQL Server services stop abruptly.I have currently written a VB script which runs every 1 hr and checks if a SQL Server Service is running or not. This VB Scri