User device error

I have a user having problems with GMS, it has happened 4 times now. I
see an alert on the GMS console:
Invalid None folder encountered.
Response recommends the user remove the GMS account on their device and
re-add it.
User has a Samsung Galaxy s4, I'm running the s4 mini and have never
had a problem.
Any ideas?
Stevo

In article <_d9Mu.6903$[email protected] m>, Stevo
wrote:
> Invalid None folder encountered.
> Response recommends the user remove the GMS account on their device and
> re-add it.
>
> User has a Samsung Galaxy s4, I'm running the s4 mini and have never
> had a problem.
I've seen that message happen as well for different units, an iPad and a
Samsung being involved. I am investigating, but haven't found anything
of note yet.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Similar Messages

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

I am trying to burn a dvd in premiere elements 8.0 but after 96% iam getting this error :
"device error-the target device isn't suitable for use."
I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
System configration :
win vista 32 bit .
Processor :Amd athlon 64 dual core 2.60 ghz .
Ram :3 gb
Graphic card :nvidia geforce 6150 se .
Camcoder model number :JVC gz-hm320.
Format :.mts
Frame size :1920/1080
Frame rate :29.97.
Please look into this problem .
Regards
Manoj Khati

This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116

I/O device error when trying to backup system image on my K330B running Windows 7 Home Premium

I set up my Idea Centre K330B to schedule complete system backups to an external HDD once a week. This worked fine for three months, then about a month ago a scheduled backup failed due to "device error encountered with either the source or the destination (0x8078012D)". It also gave "Additional information: The request could not be performed because of an I/O device error. (0x8007045D)"
I ran chkdsk/r on both the backup drive ( E: ) and the system drive ( C: ) and no problems were found. The backup drive has plenty of available space. I tried the backup to a freshly NTFS-formated external drive. I tried the backup with my BitDefender 2012 Anti-virus disabled. I tried the backup after booting in safe mode. Nothing works.
If I specify to backup only C: and not the reserved partition the backup completes with no problems.
I get the same error condition whether I perform the backup with Windows or the Lenovo backup software.
Is it possible I have a disk corruption on the reserve partition that is not found and repaired by the chkdsk/r C: operation?
I'm thinking about saving all important user files and rebooting to the factory settings, but if the reserver partition is damaged I might end up with a dead 4-month-old PC.
I would greatly appreciate any help or advice as to how to get these backups going again.

I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

CS5 Photoshop - Adobe Save for Web & Devices Error

Hi folks,
I know similar threads exists, but this one is different. For some reason, out of the blue, I can't use 'Save for Web' anymore. When I choose 'save for web', it opens the preview dialog nicely, up until I save & get this error:
"Adobe Save for Web & Devices Error
Could not complete this operation. An unknown operating system error has occurred."
Cleared all my settings, and the error remains.
I uninstalled PS CS5, installed it again... still get this error.
Hope someone knows how to fix it!
Tx!
MacBookPro3,1, running all the latest updates (OSX 10.6.4), CS5 Master Collection.
Luckily still have CS4 Master Collection installed (and Flash CS3).
(I've just got to get this off my chest, CS5 has so much issues that I stopped using it, I'm not getting paid for playing crashtestdummie. Please don't rush any future CS collections and try fixing bugs instead. )

Hi Wade,
Tx, but 99% of my time, I work on my local system (scratch disk also). Already had problems working with the company's network (files get locked or corrupted while trying to save), so we've learned the hard way not to use the network.
I guess that's somewhat expected if you work with a Mac, in a professional Windows environment.
Meanwhile, I'm a step closer in finding a solution myself. A colleague gave me a great tip, if you create an extra user account on the system, you start with a clean library. On my second account, PS CS5 is working just fine. So clearly, something went wrong in my library. Maybe permissions like you've said. At this point, I could try to fix it by copying files from the one user to the other. But I would like to wait for that connect session so they can see what's wrong.

"device error" at 99% burning bluray content to Phantom burner - any ideas? DVD works

Im am currently investigating PrE 11 after having PrE 5 and leaving out PrE 9 due.
PrE 11 is almost a pleasure to use, but I consistantly fail in checking bluray support.
One major lack of PrE 11 is that it does not allow to burn blurays to disk, wheras this option is available for AVCHD and for DVD - Adobe: why the hell did you do this?
So - I downloaded the Phantom Burner 2.0.0.0 which perfectly runs for DVD and AVCHD burning.
But when I "burn" a bluray on the phantom burner, it consistently fails with "device error" at 99%.
I included menues and removed them just to be sure whether this is the cause.
But: I can burn exactly the same footage as AVCHD in to folders as well as into a disc with phantom burner. Always in 50i 1920x1080.
The only problem exists with bluray - so I am in a deadlock - I cannot test bluray support.
Any ideas?
System: Windows 7 Enterprise, 64 Bit, PrE 11 Trial.
Thanks!

Please don't create two separate threads with virtually the same topic. It makes it very hard to keep up with what has been suggested to you and what you've already tried.
>Adobe: why the hell did you do this?
Also, this is a user to user forum. Please direct any communications for Adobe directly to Adobe the clicking the Contact Adobe button.
Please continue this discussion in your other thread so that we aren't chasing two threads at once. With your permission, I'd like to lock this thread to avoid confusion and cross-talk.

How to create Unique Identifier and save it to identify user(device)

I want to create unique identifier on iOS 5 and use it for identifying user (user device) every time app is started. I am able to create a unique identifier by following code
CFUUIDRef theUUID = CFUUIDCreate(NULL);
CFStringRef string = CFUUIDCreateString(NULL, theUUID); CFRelease(theUUID);
But unable to save it on user device so that particular identifier is not deleted even when app is uninstalled. I tried using SSKeychain approach but it gives Apple Mach-o Linker error.
Please let me know the the way I can accomplish the same.
Any help is appreciated.

I want to create unique identifier on iOS 5 and use it for identifying user (user device) every time app is started. I am able to create a unique identifier by following code
CFUUIDRef theUUID = CFUUIDCreate(NULL);
CFStringRef string = CFUUIDCreateString(NULL, theUUID); CFRelease(theUUID);
But unable to save it on user device so that particular identifier is not deleted even when app is uninstalled. I tried using SSKeychain approach but it gives Apple Mach-o Linker error.
Please let me know the the way I can accomplish the same.
Any help is appreciated.

Device error "sequence contains no matching element"

Hallo,
I just received the VirtualBench and I could use it as I connect it for the first time. I then downloaded and run the program for Window7, so that I would be able to run the program from my PC.
Since then, I cannot work anymore more with the virtualbench. It always give the same error: device error: sequence contains no matching element.....
What it wronf what shall I do?
Note: I read a similar question, but it seemed that the error disppeared somehow for unexplained reason. So, there were actually no solution mentionned for this problem.
Thanks in advance for any support.
Solved!
Go to Solution.

For anybody that has this problem in the future, we'd really like to get to the root of the problem. To help with that I have created a small utility that will pull the configurations from your device and save them to files. These configurations appear to be corrupted in these situations.
The easiest way to use the utility is to run it from the command line. It will find the first USB VirtualBench on your system and save any configuration files it has to your temporary directory. For example:
C:\Users\User\Desktop>nivb_cfgutil.exe
Saving files to C:\Users\User\AppData\Local\Temp\
Connecting to device 'vbzach'
Found config: ni-virtualbench-preferences.vbconfig
Wrote config to file C:\Users\User\AppData\Local\Temp\ni-virtualbench-preference
s.vbconfig
Found config: test_cfg.vbconfig
Wrote config to file C:\Users\User\AppData\Local\Temp\test_cfg.vbconfig
Found config: test_cfg2.vbconfig
Wrote config to file C:\Users\User\AppData\Local\Temp\test_cfg2.vbconfig
It also has some options that allow you to specify the device to connect to (either by name, IP address, or hostname), where to put the files, and whether or not to overwrite existing files on your PC. For example:
C:\Users\User\Desktop>nivb_cfgutil.exe --help
Usage: nivb_cfgutil.exe [options]
Main options:
-h, --help
      Shows help.
-d, --dev=device
      Device name to target.
-o, --out=directory
      Output directory to save config files. If not specified, the temporary di
rectory is used.
-w, --overwrite
      Overwrite existing files.
What we would like is that when people run into this issue they perform the following steps:
Attach the application preferences files:
Open a file explorer
In the address bar, enter this path (copy/paste can help):
XP: %USERPROFILE%\Local Settings\Application Data\National Instruments\NI-VirtualBench
Vista, 7, 8: %USERPROFILE%\AppData\Local\National Instruments\NI-VirtualBench
Attach the file ni-virtualbench-preferences.vbconfig to a post here so we can inspect it.
Run the nivb_cfgutil.exe utility attached to this post, and post any *.vbconfig files it creates to a post here so that we can inspect it.
Once you have done that, you should be able to fix the issue by doing the following:
Use the reset button on the back. The application also uses information stored on the PC when it starts. If the problem is there, then resetting the device alone won't help.
NI VirtualBench Help :: Reset Button http://zone.ni.com/reference/en-XX/help/371526A-01/vbhelp/wirelessbutton/
Launch the app. If it works, you're done.
If the issue was not resolved, you may also need to delete the file mentioned above.
Open a file explorer
In the address bar, enter this path (copy/paste can help):
XP: %USERPROFILE%\Local Settings\Application Data\National Instruments\NI-VirtualBench
Vista, 7, 8: %USERPROFILE%\AppData\Local\National Instruments\NI-VirtualBench
Delete the file ni-virtualbench-preferences.vbconfig
Zach Hindes
NI R&D
Attachments:
nivb_cfgutil.zip ‏991 KB

User Device Affintiy is set up in SCCM, but it is only dribbling into SCSM at about 150 machines per night???

Hi all,
Our Environment = System Centre Suite 2012 SP1, on the most recent CU release as appropriate
we have a PR1 site which is our desktop estate and in this one, Config Manager PR1 client settingshas been configured for user device affinity has been set to 900 mins over 7 days (we reduced this from the default in the hope it would speed things
up)
UDA was not configured initially in PR1 but it has been configured for almost 2 months and in an estate of just over 7000 machines in Service Manager there are only just over 3000 PC's with Primary Users. This number appears to increase by about
150 each night as the connector runs.
Configuration Manager on the other hand has primary user info for all machines.
Has anyone out there come across this and has a solution or can suggest a solution to this issue.
Thanks in Advance,
Ed
Ed

Have you checked the event log to see if there are any errors during the connector processing? The events will be logged in Application and Services Logs\Operations Manager. Look for any error messages during the time the connector was syncing. Most events
dealing with the ConfigMgr connector have a source of "Data Connectors" or "Lfx Service", but I would suggest looking through all of them from that time period. Let us know if you find anything there.
Matthew Dowst |
Blog | Twitter

[Forum FAQ]How to troubleshoot common issue when configuring user device affinity from usage data

Symptom:
Some clients might fail to automatically configure user device affinity from usage data if you have manually configured user device affinity before.
When you check the UserAffinity.log, you can find the similar error messages as below:
User 'XXXXX\XXXXX' has xxxxx usage minutes UserAffinity
Setting auto affinity for user 'XXXXX\XXXXX'. UserAffinity
Found same state message existing. (was sent before) Skip sending same state message for user 'XXXXX\XXXXX'.. UserAffinity
Figure 1. Error Message in UserAffinity.log
Cause:
As the log said, there is a user affinity state message existing in WMI which prevents client from sending new user affinity state message.
Resolution:
We can delete the user affinity state message in WMI to force the client to resend the user affinity state message.
We can follow the steps below:
1. Run Windows Management Instrumentation Tester (“Wbemtest”).
2. In Windows Management Instrumentation Tester dialog box, click “Connect”.(Figure 2)
Figure 2.
3. Type “root\ccm\statemsg” under the Namespace table and then click “Connect”.(Figure 3)
Figure 3.
4. Click “Enum Classes”. (Figure 4)
Figure 4.
5. Choose “Recursive”
in Superclass Info dialog box.(Figure 5)
Figure 5.
6. Double-click “CCM_StateMsg” in Query Result dialog box.(Figure 6)
Figure 6.
7. Click “Instances”
in Object editor for CCM_StateMsg dialog box. (Figure 7)
Figure 7.
8. Choose the messages that contain "domain/user_Auto" and click “Delete” in the Query Result dialog box.(Figure 8)
Figure 8.
After you delete user affinity state message in WMI, the user affinity state message for the user will be resent. After a period time, we can check the UserAffinity.log to
see if the user affinity state message has been successfully sent. The related information would be similar as below:
Successfully sent user affinity state message for user 'xxxxx\xxxxx'.
Successfully created pending user affinity for user 'xxxxx\xxxxx' into WMI.
Figure 9.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I'm not sure whether this is the appropriate place to add this but - a (possible) cause that I have seen which is not mentioned above is a request for an AAAA record (IPv6 address)
being responded to with an A record (IPv4 address).
DNS debug logging (Windows 2008 R2 SP1) captured requests to
192.225.156.200 and the corresponding responses. In each case the response was followed in the debug log by the event “The DNS server encountered an invalid domain name
in a packet from 192.225.156.200. The packet will be rejected. The event data contains the DNS packet.”
The domain name in the response was the same as that in the query, and looks OK.
The logged query shows an AAAA record (IPv6 address) request and the logged response returned an A record (IPv4 address).
http://www.rfc-editor.org/rfc/rfc4074.txt “Common
Misbehavior Against DNS Queries for IPv6 Addresses” says, under “Expected Behavior”:
   Suppose that an authoritative server has an A RR but has no AAAA RR
   for a host name. Then, the server should return a response to a
   query for an AAAA RR of the name with the response code (RCODE) being
   0 (indicating no error) and with an empty answer section (see
   Sections 4.3.2 and 6.2.4 of [1]). Such a response indicates that
   there is at least one RR of a different type than AAAA for the
   queried name, and the stub resolver can then look for A RRs.

CUCM 10.5: User Device Profiles provisioning possible?

Recently we've Upgraded our CUCM Cluster from 8.6.2 to 10.5 to gain some new features. In the feature list there is a lot of stuff for provisioning and making admin things easier. Right now, if there is a new employee in our company, we manually create the specific UserDeviceProfile for this user and make the settings needed, but it's more or less some standard procedure, which in my opinion, can be created by a template for example.
The phones itself will still be manually created as we need to assign the company logo to the background, installing certificates and stuff like that, which can't (can it be?) be done remotely.
In 10.5 I've seen that under "User Management - User/Phone Add" there are some points where to define different templates. So is there any way in automatically create the user device profiles, for example if the user has been created in the MS Active Directory with the proper filds (ipphone, name, ...)? I haven't found a manual for this scenario (just for the self-provisioning with IVR, which I don't want)
Thanks in advance :)

We are experiencing the same issue in our organisation. Is this simply a limitation of the Self Care Portal? If so, is it on the roadmap to support configurations with multiple Remote Destination Profiles in the future?
Error message attached.
Regards,
John.

E71 device error and music library is deleted and ...

When i removed my usb cable, the phone said device error then when i went to playlist all the music were gone. If i try to refresh nothing happens, i have removed the data from the card, and put it back still nothing. When i connect with usb cable i can see and even play the music on my laptop. There is still nothing under my playlist the music is still playing under tones but its not showing in my music files and not refreshing. Please let me know what to do to fix this.

Hi shez2012,
Welcome to the Nokia Discussion boards!
We suggest you to move a few songs into the mass memory or phone memory to see if the files are recognised by the music player. If they are and then are still not being picked up from the memory card, you should format the card and put the files back and test it.
Hope this helps you with your issue.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Adobe Save for Web and Devices Error

I had a problem with Save for Web and Devices in Photoshop CS4 - and am posting the solution for anyone else that might encounter this (posted previously for Mac but not Windows). This problem suddenly occurred - and I'm not sure why. I had the most updated Photoshop CS4 version: 11.0.2.
Issue: When I tried to overwrite an existing image using Save for Web and Devices, I received an "Adobe Save for Web & Devices Error": "Could not write the file. A file system error has occurred"
This error prevented any file (originally created using Save for Web &Devices) from being saved again with the same name. I figured out the solution by finding the resolution for Mac Photoshop and adapting it for the PC version. The solution for me was to delete the following files: "Default Settings.iros" and "Recently Used Optimizations.irs" (the only two files present) in the following directory:
C:\Documents and Settings\[user profile name]\Application Data\Adobe\Adobe Illustrator CS4 Settings\en_US\Save for Web Settings\
Note that there were other sub-directories of the "Save for Web Settings" folder - I didn't touch any of those. The problem is now resolved and Photoshop seems to function normally.

Honestly, I haven't had problems with reading/writing files to/from network drives, but I have read on this forum that there are times when it causes problems for people.
And yes, if you used the command line NET USE (or the Explorer Map Network Drive) function to create the drive, it is actually using Windows Networking behind the scenes.
-Noel

Bat multiple BLF with User Device Profiles

Has anyone able to BAT in multiple Speed Dial/BLF into a user device profile. I have CUCM 7.1 and trying to BAT in a line with multiple SD/BLF for the other buttons. I get this error
Error : Missing key in referenced table for referential constraint (informix.fk_blfspeeddial_fknumplan).
I checked my phone template and it has 1 line with 5 SD/BLF
My phone type is 9951
Thanks

Juergen,
Do your fields look like this?
Busy Lamp Field Label 3
Busy Lamp Field Label ASCII 3
Busy Lamp Field Destination 3
Busy Lamp Field Directory Number 3
J. Nelson
J. Nelson
2303 in INTERNAL-PT
Nurse
Nurse
4062 in INTERNAL-PT
Library
Library
4017 in INTERNAL-PT
B. Hipsher
B. Hipsher
4092 in INTERNAL-PT
C. Kirkland
C. Kirkland
8246 in INTERNAL-PT
L. Stoner
L. Stoner
2040 in INTERNAL-PT
South Lounge
South Lounge
2637 in INTERNAL-PT
Ginger W
Ginger W
6043 in INTERNAL-PT
K. Jaffie
K. Jaffie
4609 in INTERNAL-PT
L. Cornwall
L. Cornwall
2755 in ES-ClassRm-PT
NA Counselor
NA Counselor
2123 in ES-ClassRm-PT
S. Brigman
S. Brigman
8262 in INTERNAL-PT
D. Sorden
D. Sorden
8205 in INTERNAL-PT
J. Brandel
J. Brandel
8105 in INTERNAL-PT
J. Brandel
J. Brandel
8105 in INTERNAL-PT
S. Pebley
S. Pebley
5512 in INTERNAL-PT
S. Pebley
S. Pebley
5512 in INTERNAL-PT
Wanda B
Wanda B
6072 in INTERNAL-PT

Inserting User Device Profiles via BAT

I have been trying to insert User Device profiles using the BAT utility. When I select the Insert User Device Profiles Specific Details, select the file, and run the job it fails. However when I select the "Insert User Device Profiles All Details" the spreadsheet I chose is not uploaded but all new profiles are created and added. I am very confused because I am including all the details that are oulined as required on the "specific details" file I am trying to insert and it fails every time with a "device name" error but when I select the "all devices" the same uploaded file works fine?? Any advice/feedback would be very much appreciated.
Thank you!

Hey Vicky,
I just spent some time browsing the numerous Bugs related to BAT in the CUCM 5.1(x) versions. There are well over 250 Bugs :( I'm guessing that you may be hitting this one that does not identify * Mandatory Fields properly (like Device Name);
CSCsj74131 Bug Details
BAT.xlt UDP work sheet need changes.
Symptom:
BAT.xlt UDP work sheet need changes
Conditions:
Steps to Reproduce:
1. Download BAT.xlt.
2. Open it and goto UDP work sheet.
3. You could find "Device Profile name " as "optional"
It should be mandatory.
Also create file format for UDP missing "service".
work Around:
none
Status
Fixed
Severity
4 - minor
Last Modified
Any Time
Product
Cisco Unified Communications Manager (CallManager)
Technology
1st Found-In
5.1(2.9901.30)
Fixed-In
Release-Pending
Hope this helps! Just a guess here (sorry),
Rob

User device error

Similar Messages

Maybe you are looking for