User Dictionary for hyphenation of unknown language, CS3
Hi,
With ID CS3, I'm trying to build a User Dictionary for Armenian (no plugin exists for this). Armenian is well typed in the document with unicode chars (not with old fonts with ASCII code).
I tried using many languages (English, French) as selection both in Characters panel and in Dictionary preferences. (I read in help that user dictionary are used only for languages using Proximity as Hyphenation Vendor).
I can add hyphenated words in the dictionary, but the words in the text are not hyphenated.
I guess it could be linked with some hidden definition of what characters are allowed in each language, hence excluding armenian unicode chars.
Anyway, is there a solution to this ?
Here's a painful workaround:
1) Export an RTF from your perfectly styled InDesign doc. (If your styles are less than perfect, this method will cause you lots of pain.)
2) Open that RTF in Word.
3) Use Armenian hyphenation macro to insert discretionary hyphens in Word.
4) Find/replace the discretionary hyphens in Word with some character that won't drop when placing the doc. (Word's discretionary hyphen probably will.)
5) Resave the RTF.
6) Place in InDesign.
7) Find/replace placeholder with InDesign discretionary hyphen.
8) Clear overrides. (I told you this would hurt if your styles weren't impeccable, didn't I?)
Similar Messages
-
Unknown indexes in ABAP dictionary for a BW SAP_BW 350 ?????????
Hi all,
can anyone help me with the procedure to handle unknown indexes in ABAP dictionary for a BW SAP_BW 350 Production system?
The list of some of the indexes are as follows :
/BI0/E0CCA_C11~P
/BI0/E0FIGL_C01~P
/BI0/E0OPA_C11~P
/BI0/E0PS_C04~P
/BIC/EIEFERC~P
Thanks a lot in advance ....
Madhavi RaneYou should be able to delete and recreate indexes from the infocube performance tab, RSRV or DB02. The bigger question is why these e fact table indexes are not being handled properly. I would try searching OSS Notes to see if yo ufind one relevant for your DB;
This older Notes provides some good background
Note 594287 - DB6: Corrections to the primary index of fact tables -
A resource in this file uses an unknown language (for default MFC project)
Visual Studio 2013. I created a default MCF project and tried to open rc-file via Resource View. No custom changes were made.
I got an error: "A resource in this file uses an unknown language: Neutral (Default) (unknown sub-lang: 0x3). Unable to open this file." I used AFX_TARG_ENU: language 9 (english), sublanguage 1. There is no language value
in my project defined as 0x3 in winnt.h.Hi JGANOL,
Based on your issue, could you please tell me if you get same error when you re-create a new Resource Script File in the MFC project?
https://msdn.microsoft.com/en-us/library/hcctd63y.aspx
https://msdn.microsoft.com/en-us/library/sxdy04be.aspx
(1) If you get same error message, I suggest you try to reset the VS setting file by going to the Tools->Import and Export Settings... check this issue again.
If it still could not help you, maybe you will need to repair or re-install the VS2013 check this issue again.
(2)If you did not get same error message, I think that the issue may be related to the specified the MFC project. So I suggest you can tell me the detail steps about how you create a MFC project.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to use a dictionary for multi languages when displaying mess
how to use a dictionary for multi languages when displaying messages??
1st you have to define new messages in the dictionary:-
1. We have to open the application.
2. Functional administrator responsibility.
3. Core services.
4. Messages.
• Create message button.
• Now fill the name of the message that we want to call it from our code in the Code field.
• Fill the application name with short name of the application.
• Choose the language.
• Set the text you want to be displayed.
2nd, Now in the CO in the in the process form request you will code throw new OAException ("application short name","Code").
Now run and see the result.
3rd we want to use Arabic messages, use the same one you have created for saving as an example but you choose duplicate and set the language Arabic.
• Run the page.
• Choose preferences.
• Current Session language = Arabic.
Now you can see the result. -
English Language dictionary for 6300
can anybody in the house help me out with an english language dictionary dt's smaller than 1MB so i can install it on my 6300. i got this oxford concise english dict ver 11e but cant get the registration number. if can help me with reg number fro dt one, i will appreciate.
can you forward me the English Language dictionary for 6300 application
thanks -
Language Pack for Premiere Pro CS2 or CS3
Hei everybody,
i´m looking for a language pack for Premiere Pro CS2 or CS3.
Cant find anything in the net.
Thanks for help.
Best Regrads
AdOk, thanks.
On an other page, some wrote about a language pack.
First he had to copy the files into the C./ Adobe directory and than he had to activate it on HKEY_local_machine..
BG -
Error in compiling a custom dictionary for text analysis
I got a error when I tried to compile the custom dictionary for the Text Data Processing transformor. I am looking for help to solve the problem or work around the error.
The error is as follows:
[ERR] Can not create file [C:/ws_sclg.1]
Here is the command I was using:
C:\Program Files (x86)\SAP BusinessObjects\Data Services\bin> tf-ncc -d ..\TextAnalysis\languages -o C:\Sample Source\Dictionary C:\Users\jack\Documents\Visual Studio 2008\Projects\XMLFile1.xml
It appears to me that the command was trying to create a log file or some temporary file in my C drive root directory, and the OS denied the action. The Data Services is running on a Windows 2008 Server R2. I wonder if there is a way to specify where to create this log file or tempory file?
Any insight or help is appreciated. JackInstead of calling the command from the windows shell command interface, I was able to call the compilier from Data Services; this problem is now resolved.
-
How to use the User Dictionary---Pls help me......
User dictionary how to use?
1. I have typed all the words in the Oxford hyphenation dictionary and saved text file.
2. I have created new dictionary in the preference file.
3. i have imported all the typed words in the created dictionary file.
4. I have faced the problem. User dictionary is not supporting properly. Can i disable the System dictionary.
5. Most of the words are hyphenating by system dictionary only
Can any one help me out. how to handle this.One thread is sufficient, please. If noone responds it means they don't have an answer for you.
If you can help the OP, please see his original post at http://forums.adobe.com/message/2169036#2169036
I am locking this thread. -
How to use the User Dictionary
User dictionary how to use?
1. I have typed all the words in the Oxford hyphenation dictionary and saved text file.
2. I have created new dictionary in the preference file.
3. i have imported all the typed words in the created dictionary file.
4. I have faced the problem. User dictionary is not supporting properly. Can i disable the System dictionary.
5. Most of the words are hyphenating by system dictionary only
Can any one help me out. how to handle this.Please any one help me for this user dictionary how to use. I am very struggling.
-
User Dictionary choice snaps back to Main Dictionary choice....
...despite my user dictionary choice showing up in the "currently selected dictionary" window (and, of course, it's one of the user dictionary choices available ans showing in the Appleworks Essentials folder/Dictionaries.)
But every time I prompt "done' and re-open the "select dictionaries" window, my choice has disappeared and has toggled back to the 'main dictionary' window, showing what is chosen as "main dictionary" no matter what I try.
But if I choose my user dictionary when selecting it in the "Main Dictionary" window, it stays, and is usable for spell checking. But switching back and forth like that seems a bit cumbersome to me...
Any ideas?Adding to what Yvan has said...
AppleWorks allows you to choose one each of four dictionary types at any given time. Two of these dictionaries, the Main dictionary and the User dictionary, are used by the spell check feature in AppleWorks.
When you tell AppleWorks to Check spelling, the feature compares each 'word' in the document with all of the 'words' in both the (chosen) Main dictionary and the (chosen) User dictionary. If it finds a match, it accepts the word as correctly spelled and moves on to the next word. If it does not find a match, it displays the 'word' as a "questionable word", offers some possible spellings, and waits for you to tell it what to do. If you tell it to 'Learn', then the 'word' is added to the current User dictionary, and will be recognized as correctly spelled in future searches.
The remaining two dictionary types, Hyphenation and Thesaurus, are not used by the spell check feature.
Hyphenation is used by the auto-hyphenation feature to determine where to split multi-syllable words when they extend beyond the available space at the end of a line of print.
Thesaurus offers a choice of synonyms to replace a selected word.
Changing your choice of one type of dictionary has no effect on the current dictionaries of other types.
Regards,
Barry -
Hi. I recently upgraded a user from CS3 to CS4 and he would like his InDesign user dictionary to be moved so he can access it in CS4. I've been unsuccessful in locating the dictionar in CS3, does anyone have any suggestions on where it might be located? Thanks!
On XP it's \Documents and Settings\<user>\Application Data\Adobe\InDesign\Version [No.]\Dictionaries\<dictionary vendor>
I was just trying to clarify, because I wasn't sure from the response, that everyone understood the user dictionaries would be stored in the user-specific location, not the program folder.
Edit: sorry, I forgot to change the specific version number in the path to indicate to choose the version you're looking for . That path is good for versions 3 or 4. for version 2 (and I think version 5 -- I don't seem to have any version 5 user dictionaries defined) you'd need to look under \Documents and Settings\<user>\Local Settings\Application Data\Adobe\InDesign\Version [No.]\Dictionaries\<dictionary vendor>. I wish Adobe would pick one location for this stuff and stick with it!
Anyway, the bottom line is to do the search in your user data area. -
Can I add repeating words to my user dictionary?
I use Dynamic Spelling when I work in InDesign, and it brings up a somewhat unique issue for me. I live and work in a town called Walla Walla and since where I work has Walla Walla in it's name, you can guess I have "Walla Walla" numerous times in a document. I can add "Walla" to my user dictionary so Dynamic Spelling doesn't think "Walla" is spelled wrong, but it always seems to think "Walla Walla" is an incorrect repeating word and gives me a squiggly green line.
Is there any way to add a two word 'word' to the User Dictionary so it doesn't think Walla Walla is a repeating word? ...even though it technically is.
I realize this is a very uncommon issue, and if there isn't a way to add Walla Walla to my user dictionary I suppose I can just put my big girl pants on and ignore the squiggly. I mean, I don't imagine too many people run into this problem as much as I do!
(using InDesign CS5.5)Have you tried:
* entering Walla Walla with a non-breaking space between the Wallas into the dictionary? The non-breaking space will also assure that Walla Walla doesn't split across like breaks.
* applying a character style to Walla Walls with find and replace that uses no language, so the dictionary skips spell checking it?
* creating a text variable with the content Walla Walla? Text variables don't wrap across line breaks and they aren't spell checked.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
GoaliGrlTilDeath wrote:
I use Dynamic Spelling when I work in InDesign, and it brings up a somewhat unique issue for me. I live and work in a town called Walla Walla and since where I work has Walla Walla in it's name, you can guess I have "Walla Walla" numerous times in a document. I can add "Walla" to my user dictionary so Dynamic Spelling doesn't think "Walla" is spelled wrong, but it always seems to think "Walla Walla" is an incorrect repeating word and gives me a squiggly green line.
Is there any way to add a two word 'word' to the User Dictionary so it doesn't think Walla Walla is a repeating word? ...even though it technically is.
I realize this is a very uncommon issue, and if there isn't a way to add Walla Walla to my user dictionary I suppose I can just put my big girl pants on and ignore the squiggly. I mean, I don't imagine too many people run into this problem as much as I do!
(using InDesign CS5.5) -
Can i change the dictionary for spell checking
Hi,
I am using the trial version of robo help and I am testing
how the support for german is.
I changed my project to german (file / project setings /
language). The result up to now is, that there is german spell
checking, but the dictionary used doesn't know all words that I' m
using. Of course I can add word by word to the dictionory, but I
dont't like to do this hard job.
Is there a way to use the dictionary which MS Word is using,
which would be very fine for me?
If anyone can help me, thanks for this.
Kindly regards
FritzjHi all
I did a bit of digging around and here is what I've
discovered. Hopefully it will help?
I am using Word 2003, so the method outlined here is for that
version. Note that I'm not a particularly rabid Word user, as I
tend to avoid it if at all possible, so I suppose other versions
may differ. Additionally, I'm assuming here that you are referring
to the personal dictionary and not one that is supplied by virtue
of installing Word or some other component.
In Word, I located the personal dictionary. (Tools >
Options... > Spelling & Grammar tab > Custom
Dictionaries... button) This listed the "Full path" of
C:\...\Application Data\Microsoft\Proof\CUSTOM.DIC. I find this
mildly amusing, as I can't truly see the "full path" and am left
wondering what lies between C:\ and \Application Data. I mean, ...
could be anything, no?
So on a hunch, I looked in the following location:
C:\Documents and Settings\Rick Stone\Application
Data\Microsoft\Proof
As luck would have it, there was CUSTOM.DIC all big as life
and twice as natural.
Suspecting it was a simple ASCII text file as the RoboHelp
HTML personal dictionary is, I tried opening it using Windows
Notepad. Sure enough, it popped open. Seems to simply list terms
with no other information.
So at this point, we know how to access the contents of the
personal dictionary for Word 2003. Now let's look at RoboHelp HTML,
shall we?
In RoboHelp HTML, you click Tools > Spelling Options...
> Dictionaries tab. Here, you should see Personal Dictionary.tlx
listed in the left panel bearing the label of "Used dictionaries:"
(Sorta sounds like a library sale, eh?) To the right of the file
name, in the same pane, you should see the path listed. Mine reads:
file://C:/Documents and Settings/Rick Stone/Application
Data/eHelp/Lexicons/Personal Dictionary.tlx
I opened it using Windows Notepad and here is what I see:
#LID 30840
1boffo i
2xzxz azxzx
3ppp ApPp
4azx cxza
5winnie CWiNnIe
6garbo e
I have some really odd terms in there. And for good reason!
During my initial spelunking, it appears that a particular
structure is in place. So I tested by adding terms along with
different options for each term. The terms listed are matched to
the option used when you click the Modify... button on the Spelling
Options dialog.
1boffo i
1boffo is the term and the i means "No action" is the option
used for the term.
2xzxz azxzx
2xzxz is the term and the a means "Auto Change" is the option
used for the term. The zxzx following the a indicates the term to
automatically change to.
3ppp ApPp
3ppp is the term and the A means "Auto Change (Preserve
Case)" is the option used for the term. The pPp following the A
indicates the term to automatically change to.
4azx cxza
4azx is the term and the c means "Change" is the option used
for the term. The xza following the c inidicates the term to offer
to change to.
5winnie CWiNnIe
5winnie is the term and the C means "Change (Preserve Case)
is the option used for the term. The WINnie following the C
indicates the term to offer to change to.
6garbo e
6garbo is the term and the e means "Treat as misspelled" is
the option used for the term.
Sooo, having looked all that over, it would seem as simple as
copying the contents of the original Personal Dictionary from Word,
then opening the Personal Dictionary from RoboHelp HTML and pasting
the terms in. Then try modifying them a tad by inserting an "i"
following the term. I'm not sure if a tab is what was used between
the term and the i, so it may take a bit of trial and error.
Hopefully this helps a bit... Rick -
Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSPHi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION canceled
Dear SAP Guru,
The BG job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION is canceled every day and it´s
generating shortdump. Our system is SAP EHP1 for SAP Solution manager.
SAP ABA and SAP BASIS components are release 701 level 3.
ST is release 400 level 19
ST-PI is release 2008_1_700 level 1
ST-A/PI is release 01L_CRM570
Pls look on this shortdump.
Runtime Errors RAISE_EXCEPTION*
Date and Time 22.03.2010 06:50:11
|Short text |
| Exception condition "CUSTOMIZING_NOT_FOUND" raised. |
|What happened? |
| The current ABAP/4 program encountered an unexpected |
| situation. |
|What can you do? |
| Note down which actions and inputs caused the error. |
| |
| |
| To process the problem further, contact you SAP system |
| administrator. |
| |
| Using Transaction ST22 for ABAP Dump Analysis, you can look |
| at and manage termination messages, and you can also |
| keep them for a long time. |
|Error analysis |
| A RAISE statement in the program "SAPLDSWP_UTILITY" raised the exception |
| condition "CUSTOMIZING_NOT_FOUND". |
| Since the exception was not intercepted by a superior |
| program, processing was terminated. |
| |
| Short description of exception condition: |
| |
| |
| For detailed documentation of the exception condition, use |
| Transaction SE37 (Function Library). You can take the called |
| function module from the display of active calls. |
| - |
|How to correct the error |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "RAISE_EXCEPTION" " " |
| "SAPLDSWP_UTILITY" or "LDSWP_UTILITYU19" |
| "DSWP_GET_GLOBAL_CUSTOMIZING" |
| |
| or |
| |
| "SAPLDSWP_UTILITY" "CUSTOMIZING_NOT_FOUND" |
| |
| or |
| |
| "RDSWP_NM_SYNC_USER_DATA " "CUSTOMIZING_NOT_FOUND" |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
*|
|System environment |
| SAP-Release 701 |
| |
| Application server... "crsgrant" |
| Network address...... "10.128.32.175" |
| Operating system..... "Windows NT" |
| Release.............. "5.2" |
| Hardware type........ "2x Intel 801686" |
| Character length.... 8 Bits |
| Pointer length....... 32 Bits |
| Work process number.. 13 |
| Shortdump setting.... "full" |
| |
| Database server... "CRSGRANT" |
| Database type..... "ORACLE" |
| Database name..... "SM1" |
| Database user ID.. "SAPSM1" |
| |
| Terminal.......... " " |
| |
| Char.set.... "Czech_Czech.28592" |
| |
| SAP kernel....... 701 |
| created (date)... "Apr 12 2009 22:43:15" |
| create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00" |
| Database version. "OCI_10201_SHARE (10.2.0.4.0) " |
| |
| Patch level. 39 |
| Patch text.. " " |
| |
| Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.." |
| SAP database version. 701 |
| Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows |
| NT 6.0" |
| |
| Memory consumption |
| Roll.... 8112 |
| EM...... 4181184 |
| Heap.... 0 |
| Page.... 24576 |
| MM Used. 873664 |
| MM Free. 170296 |
|User and Transaction |
| |
| Client.............. 001 |
| User................ "SOLMAN" |
| Language key........ "E" |
| Transaction......... " " |
| Transactions ID..... "C27635DF574FF121B0470050569757E9" |
| |
| Program............. "SAPLDSWP_UTILITY" |
| Screen.............. "SAPMSSY0 1000" |
| Screen line......... 6 |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLDSWP_UTILITY" - in |
| "DSWP_GET_GLOBAL_CUSTOMIZING". |
| The main program was "RDSWP_NM_SYNC_USER_DATA ". |
| |
| In the source code you have the termination point in line 22 |
| of the (Include) program "LDSWP_UTILITYU19". |
| The program "SAPLDSWP_UTILITY" was started as a background job. |
| Job Name....... "SM:SYNCHRONIZE USER DATA FOR NOT" |
| Job Initiator.. "SOLMAN" |
| Job Number..... 00104000 |
Have you some solution or advice?
Best Regards
JakubPlease could you check the following ?
- Please ensure that the latest version of note 1172948 has been implemented
- Please follow the recommendation in note 1314587.
- Check table 'DSWPGLOBALCUSTOM' and ensure that the entry 'DTMLOG' is available. Create the entry if missing.
These procedures will solve this issue.
Maybe you are looking for
-
How to find library for a report
Hi I am suppose to change some thing in a report.We have lot of library and am not able to locate the one.I know the report name and trying to use GR32 but don't know the library name.Is there anyway to find out the lib name ? I also want to copy th
-
Hi all, Does anyone has made a backup of Oracle Database XE (ARCHIVELOG ON/OFF) directly to a flash drive(thumb drive, dvd,etc).? Is it better to backup on the local disk first and only after that to copy the backup files to the external device? Or i
-
IMac 27" Static Noise through external monitors
Hey, I recently bought a 27" iMac and I'm running a pair of Yamaha HS50Ms out for monitoring audio recording. When I'm not playing sound the speakers output static from the computer (presumably hard drive noise or something?). It's especially noticea
-
Hi, I have used one date field 'ERDAT' in generic delta and data extraction has been done through custom build function module.During delta upload , while debugging of my FM I have found that this delta field 'ERDAT' is taking the date that is 1 day
-
Why can't I see ItunesU podcasts on apple TV
Why can't I download & watch ItunesU podcast on Apple TV ?