User disabled until start date not getting ROs provisioned via AP

Here's the situation: I have a user in OIM that is disabled until start date. When the start date rolls around, and the job "Enable User After Start Date" runs followed by "Evaulate User Policies," the user is correctly enabled and the correct role gets assigned but the access policy associated with that role does not appear to get triggered so the APs resources are not assigned. However, if a user is entered the same way (via HR recon) but is on or after its start date, then the role gets assigned, the access policy fires, and the ROs are provisioned just fine.
I have noticed that if a user is moved from disabled to enabled, then the membership rules fire and any roles associated with the rules get assigned but in the DB the field USR_POLICY_UPDATE remains null. If I update that field with a '1' and re-run "Evaluate User Policies," the resources are provisioned correctly.
I am wondering if anyone has seen this before or has a suggestion as to how to resolve this.
Thanks,
Stephen

Thanks for the suggestion. As it turned out, I did not have Retrofit checked but unfortunately that did not resolve the issue. The behavior remained the same after checking and re-running 'Evaluate User Policies'.
I may have a workaround for this issue that I am in the process of implementing. I'm creating a job that will run right before 'Enable User After Start Date' that will update the USR_POLICY_UPDATE field to'1' if the status of a user is 'Disabled Until Start Date.' Then the user will get enabled, assigned the appropriate roles via rules, and 'Evaluate User Policies' should run and now find this user and apply the access policies.
Anyway, seems like there should be a simpler answer so I'll keep checking here if anyone has one. I'll also update if the above workaround works.
Thanks,
Stephen

Similar Messages

Contact person Rel.ship Data not getting updated in B2B Web User Mngt

Hi CRM Gurus,
Need some help on Web User Management functionality.
Sub: Contact person Relationship data not getting updated when we change the company (to wich contact person belong to) in ISA CRM 5.0 Web User Management.
we are currently on CRM ISA 5.0 and using Web User Managment for our B2B scenario. New creation of users is working fine. But when we want to change the company (Sold to pary) for the existing contact person, the relationship data in CRM is not getting updated and the below are the details.
Contact person No: XXXX (has a Relationship: "Is contac person for YYYY company in CRM)
Company/Sold to Party: YYYY (has a relationship "Has contact person XXXX in CRM).
When I chage the contact person's (XXXX) company from YYYY to ZZZZ,
- Relationships of the new assignment for ZZZZ in CRM not getting updated.
- Old Records in YYYY is not getting deleted (i.e. relationships.
- There is No relationship data appear in XXXX.
Appreciate any inputs on the same.
Thanks,
Rahul >>>

Hi Rahul,
I'd suggest you running a session trace / ABAP debugging to see if some information is not getting passed from the Java stack onto the ABAP stack. An alternate move would be to create a new OSS customer message.
Cheers,
Ashok.

Team view data not getting refers for some user

Hi,
We are facing an issue in team view app for mss, manager's are seeing details of employees not belonging to their Org Unit/ data not getting refreshed. This seems to be the Cache related issue where the data of perviously logged in user is displayed to the current user till browser cache are cleared manually.
User don't have permission to clear browser cache. Is there any work around.The issue is coming only for some users.I have enable the 'ABAP HTTP Security session Enabled' property of the system used.
Regards
Pallavi

Hi Karthik,
in the first view I execute the BAPI and in the second view I show the results. In the second view I also submit the modified data via another BAPI.
As I execute and display result of same BAPI in two different views I have bound the same model node to both of these views. Let me give you some sample code for understanding what have I done.
In the first BAPI's search action handler I have written:
          Zsr_Packnr_Validate_Components_Input input = new Zsr_Packnr_Validate_Components_Input();
          wdContext.nodeZsr_Packnr_Validate_Components_Input().bind(input);
          input.addT_Version(new Zsr_Packnr_Field_Values());
          input.addT_Zsr_Genbr(new Zsr_Packnr_Field_Values());
input.setZsr_Gmc(globalMaterialCode);
          input.setZsr_Mrc(mrc);
          input.setZsr_Ctry(country);
          input.setZsr_Dc(distributionChannel);
          input.setZsr_Div(commercialSegment);
wdContext.nodeOutput_Validate().invalidate(); //as u suggested
          wdContext.currentZsr_Packnr_Validate_Components_InputElement().modelObject().execute();
          wdContext.nodeOutput_Validate().invalidate();
In the second BAPI I just display the output node from the same Model context node (its mapped to the second view too).
But as I said whenever I update some values in the result set and submit it the data gets submitted properly. But when I press the search button again, the previous set of data gets populated, not the just updated data.
If anybody has some idea on why the second time search BAPI execution still shows the previous set of result it will be a great help to me.
Thanks for all your help.
Shubhadip

Data not getting populated in Payslip in ESS Portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Hello,
Do one thing for executing the PZ11_PDF trsaction please follow following steps.
1. Once you log in SAP system with same User - Id which you r using on Portal .
Once log in PUT "/N" in the command box . Then put the trasaction "PZ11_PDF" and execute it will
Call the salary statement .
Or
Once you log in SAP system put the trasction "/nsbwp" then give the trasaction "PZ11_PDF" it will
call the salary statement ..
give inputs once you done
.....The issue with Authorisations please check it ...
Add this object in ESS role "S_SERVICE' ...
and this object in ESS role "P_PERNR" ---infotype 0008
Edited by: Vivek D Jadhav on Jun 15, 2009 11:49 AM

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

HT4539 my ipad is disabled and I can not get it to open my main screen

my ipad id disabled and I can not get it to open my main screen, how can i regain access to the product

If it's showing the red disabled screen then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

In VA01 In Schedule line Delivery date not getting populated

Hello,
We have developed enhancement for VA01 tcode.
Depending upon the quatity entered for a material it should show one more item as free good.
If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
Can any one please suggest what i need to do in order to display delivery date for free good.
Thanks in advance.
Regards.

Thanks for your response.
Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

Data not getting populated in ESS Payslip in portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Asha,
Maintain Feature EDPDF which determines the SMARTFORM being used to make the payslip available for employees. This is more of a HR related issue and I believe if you post this in the ESS or HR Forum you would be able to resolve this issue.
Good Luck!
Sandeep Tudumu

Data not getting fetched from Quotation to Contract

Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael Appleby

Please add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG

I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried

I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Error AA168 Ord.dep.start date not allowed in dep.area 60 (Please correct)

Hi experts,
We upgraded to ECC6 from 4.7 version last month.
For some assets we have start deprecation date filled for area 60 with deprecation key LINV.
We would like to modify deprecation key to 0000 but we have error "AA168 Ord.dep.start date not allowed in dep.area 60 (Please correct)"
Have you any idea to resolve this issue.
Thank you in advance
Kind Regards.

Dear Shankar
here is what i have in transaction
001     01/01/02/02          01     01     02     02
002     01/01/01/01          01     01     01     01
003     01/06/02/02          01     06     02     02
004     06/06/02/02          06     06     02     02
i do not anderstand any thing in this transaction
Can you help me resolving this issue?
Thanks in advance.
Kind regards

When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

Hi
When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

When you (or someone) first switched on your computer, you (or someone) had to choose a password. This protects your computer, and you need it to install most software or change the system. We can't help you if you forget it, sorry.

Cell data not getting refreshed in which user enters data OO ALV(editable)

Hi Friends,
I am using OO ALV for editable grid display.
I am unable to change grid data in the cell in which user enters something, using OO ALV. Did through debugging of my own program and found that some problem with system program. Then I did all system debugging. Could not find out why is the grid not getting refreshed with the new data in the cell in which user had entered some value. Rest of the cell's data are getting refreshed with the values which i am updating in the final internal table. I can see that the data in the final internal table is changed for the cell in which user enters data. But even after the call of
      CALL METHOD obj_alvgrid1->refresh_table_display
does not refreshes the data in the cell in which user had entered data. Rest of the cells data are getting refreshed.
Piece of code:
SET HANDLER obj_event_receiver->handle_data_changed
                                     FOR obj_alvgrid1.
    METHODS: handle_data_changed
                   FOR EVENT data_changed OF cl_gui_alv_grid
                       IMPORTING er_data_changed
                                 e_onf4
                                 e_onf4_before
                                 e_onf4_after.
METHOD handle_data_changed.
DATA : v_valid    TYPE char1,
         v_refresh TYPE char1.
*--check mt_good_cells semantically
CALL METHOD perform_semantic_checks( er_data_changed ).
*--If PBO is again visited, just refresh the ALV grid.
CALL METHOD obj_alvgrid1->refresh_table_display
    EXCEPTIONS
      finished = 1
      OTHERS   = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
ENDMETHOD.
METHOD perform_semantic_checks.
    LOOP AT er_data_changed->mt_good_cells INTO w_good.
      v_index = sy-tabix.
      CASE w_good-fieldname.
        WHEN 'ZASCAS'.
*Now here based on some conditions I am changing my final internal table i_zamtsmatnp
                          MODIFY i_zamtsmatnp FROM w_zamtsmatnp INDEX
                                           w_good-row_id TRANSPORTING
                                             zascas modif.
User enters data in zascas field. Based on the data entered, I am changing other fields which is getting refreshed. I am also changing zascas in the program even after user had already entered the value which was bit wrong and i am correcting it in the program on the even "data_changed" even.
Please help me friends as i m strugling past hours wondering why the data is not getting refreshed for the cell in which user enter data.
Regards,
Surya

Hi Surya,
   The approach you are following is correct. You need to use the comibnation of all these things:
Event - DATA_CHANGED
Methods - CHECK_CHANGED_DATA
             - GET_CHANGED_DATA.
However, here are few standard programs which are having similar functionality.
BCALV_EDIT_03
BCALV_EDIT_07
Check out these once.
Note: If anything is helpful, dont forget to reward points
Thanks,
Adithya K
SAP Practise
[email protected]

All Data not getting viewed from one user

Hello,
I have created a user named "ABC" in SAP and have given full authorization to that user.
But while logging through that user and viewing the Sales Order all data are not viewed through the form as i haven't
defined Data Ownership for that user but still i am not able to view all data from that user login.
Please suggest what i have to do view all data from that login.
Thanks & Regards,
Amit

Hello Amit,
Data ownership authorization would not be override by general authorization. If this user has not been assigned for data ownership authorization, the sales order may not be available to the user.
Thanks,
Gordon

RAR 5.3 SP8 - Action Usage by User Report - Change Start Date?

Hello,
When we run the report "Action Usage by User" in RAR, it shows a default "Start Date" of 1/12/2009. RAR put this in there on its own. We never got the Action Usage Generation Job working correctly until a few weeks ago (we had some issues that SAP addressed and then it took time to get resources to go back and resolve some things on our side). Since we've only had the background job that pulls STAD data running successfuly since 10/3/2009 (it runs every 6 hours), we'd like to change the default "Start Date" on that Report Screen to be 10/3/2009. This way, users are not confused into thinking when they run the report and leave the date set as 1/12/2009, they are getting tcode usage data since that date. Because they're not getting tcode usage since that date. Our records really only go back to 10/3/2009.
We could instruct our users to change the date every time but we feel it'd be easier if we just changed the date so they didn't have to worry about it.
Does anyone know how we could tweak this? What table that default date would be under? How could we modify?
Thanks!!
Jes

The table where that date is is VIRSA_CC_USAGECTL
If you use the debugger tool, you'll see there's only 1 row in this table. You'll find the FROMDATE, TODATE, and FILENAME columns. I FILENAME column should be null.
Row FROMDATE TODATE FILENAME
1 2009-01-12 9999-12-31
If possible, could you confirm you are seeing similiar information?
The issue we are having is trying to figure out how to update this table...we need that FROMDATE to be 2009-10-03.
Thanks!
Jes

User disabled until start date not getting ROs provisioned via AP

Similar Messages

Maybe you are looking for