User Discovery attribute added but not showing up in v_R_User

Hi - working in 2007 here.  I added two attributes for user discovery, mail and telephoneNumber.  v_r_User.mail0 column came in fine but tel # did not show up.  Can someone point me to where I should troubleshoot this?  Thanks.

Yea, I didn't mention that.  The log only said it failed to get the optional attributes.  It ended up being right under my nose.  The container set was the root and was set to exclude groups.  So that attribute was not available
in the location it was searching.  As soon as I set to include groups I kicked off a discovery, re-ran the select for v_r_user and the column was there and starting to populate.

Similar Messages

  • Keywords added but not showing in iPhoto?

    I have just started working in iPhoto for the first time since Lion upgrade, and I've got a photo (or group of them--the behavior is the same for single image for groups) selected, info including keywords displayed to the right, move to keywords entry area, start entering a word, and the complete keyword (one I've used before) comes up in the little drop down menu, I click on the dropdown, and then the keyword sort of flashes in the keyword box, and vanishes.  The little arrow by the box is set to show keywords, the view menu shows I've selected to view keywords, but the keywords aren't 'sticking'.
    This is in an older library upgraded to this version of iPhoto, then with database rebuilt, and still the problem persists.  Suggestions?  I want to upload these to flickr and it's so much handier to have the keywords done in iPhoto and carry over....

    This behavior stopped after a restart of the computer, and I can't reproduce it with my other libraries in a similar state post-upgrade to iPhoto 11, so I will mark this one as solved.

  • I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

    i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
    thanks
    john

    Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
    tt2

  • I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

    I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

    If you only see the time then that would mean that you see an entry of the current day (today).
    History items from past days should have the date as well in the Most Recent Visit column.
    You should be able to see this changing if you open the last 7 days folder and scroll down.

  • Photo Uploaded in AD but not showing/visible in Lync 2010 client

    Photo Uploaded in AD but not showing/visible in Lync 2010 client
    bala

    Hi,
    Please also double check the size of the photograph in AD, make sure the size not overtake 48 pixels by 48 pixels, as it has a serious limitation on the size and resolution of the photos: the thumbnailPhoto attribute can only hold a photograph with
    a maximum size of 48 pixels by 48 pixels.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    how to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
    At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card.

  • My iPhone 4, bluetooth turn on in settings but not showing on home screen

    My iphone 4,bluetooth turned on in settings but not showing on home screen

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Push button ijn appraisal showing in backend but not showing inn portal

    Hi Expert,
    I would like to ask that push button in appraisal while configuring ESS/MSS package.
    It is showing in backend, but not showing in portal.
    Request you to give your inputs to bring push button on to the portal.

    Hi,
    are you using the same user to access backend and portal?. In backend, did you try from transaction PHAP_CHANGE with that user?. If you try with transaction PHAP_ADMIN in backed you are accessing as administrator, so you cannot compare the behaviour in PHAP_ADMIN and portal.
    Regards,
    Ana

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

  • Device Show in My Computer But Not Show in itunes

    My iPod Shuffle Disconnect During The Restore Process And Now Device Show in My Computer But Not Show in itunes.Please Help Me.to Solve This problem>

    Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.

  • In downloading my Events from iPhoto on my Mac to my iPad Air, the Events arrive in the proper order but not showing the Key Photo.  At the same time, the Events arrive in iPhoto on the iPad in totally random order but showing the Key Photo.Why?

    In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?

    HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
    i tried to sort it out  by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
    i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
    WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
    I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated.

  • Playing movie on tv; playing but not showing up; what output, DVD?

    1st time trying to play movie on tv; playing but not showing up; do I need to change output?  Only DVD & DVR shown. Thx

    You need to provide more information. How are you connecting your iPad to the TV. Are you using an Apple TV 2, a component AV cable, a composite AV cable or the digital AV cable?

  • Apps showing in library but not showing up in devices i pod- sync apps list. ...pls help

    apps showing in library but not showing up in devices i pod- sync apps list. ...pls help
    id: [email protected]

    Are the apps checked to be synced to the iPod and did you click on the sync button in Tunes?
    Were the apps purchased fro the same accoubnt signed into in the iPod?
    Are the apps compatible witht he iPOd model and iOS version?
    Do you have restrictions set that prohibit instaling apps?

  • Data source was activated and replicated but not showing up in RSA7.

    Hello,
    Data source was activated and replicated but not showing up in RSA7.  At what point does the data source appear in the Delta Queue?
    Thanks

    Hi,
    for LO,LIS,generic,FI data sources, delta records come from delta queue.
    if u run the INIT in BW whether it may be success or not delta queue will be maintained in RSA7. and u can check the records in RSA7 or smq2.
    when the init request goes to R/3 then it will maintains delta queue in RSA7.
    assign points if it helps,
    thanks,
    pavan.

  • HT1539 Digital copy transferred successfully to my computer, but not showing up in purchased list on other devices.

    Digital copy transferred successfully to my computer, but not showing up in purchased list on other devices. This is the first time I've encountered this issue. Package insert says copy is iPad compatible. Is there anything I can do to fix this? (The movie was Kung Fu Panda)

    it's a known issue. Everyone is experiencing this issue. Give it time for Apple to rectify the issue.

Maybe you are looking for