User dose not have Administrative rights, however the user is set as admin

Just did an Archive & Install of a MacBook Pro 3.1, upgraded from Tiger to Leopard , original thread (http://discussions.apple.com/thread.jspa?threadID=2309825&tstart=0). I did all available updates, added it to an active directory and set all network admins to be administrators (did in root admin account). I even had the user log in and manually set their account to be administrator. Yet the user tried to update their Itunes and was prompted to submit account information, the machine didn't take their info nor did it take mine, i had to use the root admin account to upgrade the software. Is there something i'm missing here? Open to any suggestions.

no one posted to this thread
i ended up making the user a new profile and manually pulling over the users documents and files

Similar Messages

  • I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update."  I have it set as adminstrator as the user.

    I am trying to install itunes for my mobile, and I keep getting the message "You do not have administrator rights, please contact the system administrator to preform an update."  I have it set as adminstrator as the user. I am running Windows 7 Ultimate. Help please?

    Thanks, but I've done that several times & it still says I need administraive privileges. I had itunes installed with no problems until I did the latest update. After that it just disappeared, so I tried reinstalling. Now I can't sync my phone. This is so frustrating!

  • This log in user does not have proper rights to use WebCenter Capture

    Hi experts,
    We have WCI 11.1.1.8.0 setup. It has WEC configured. However when I login with "weblogic" user. This is domain admin user. WEC allows user to login and shows top navigation bar. However in the body it shows below message
    "This log in user does not have proper rights to use WebCenter Capture"
    I am sure i have not gives a proper group/ role to this user. I am not sure which one is that.
    Regards,
    Vikrant Korde.

    Hi Vikrant,
    This happens if user is not in Capture Application Role.
    Check this:
    Log in to EM
    Right-click the capture_domain, select Security, and then Application Roles
    In the Application Stripe field, select capture, and then click the Search application roles icon to display the Capture application roles.
    In the Capture User add this weblogic.
    It will work now.

  • Failover cluster node - You do not have administrative privileges on the server 'servername' ?

    Hi Hello & Good morning Technet's,
    I would like to post a question which i really expecting a solution.
    I got 2 domain in one single forest.
    Domain 1: hg.corp
    Domain 2: iac.corp (iac.corp
    is a tree domain under hg.corp forest)
    Trust : Transitive
    trust between hg.corp and iac.corp
    Domain controller 1: dc.hg.corp
    (for hg.corp)
    Domain controller 2: iacdc.iac.corp
    (for iac.corp)
    I want to make a Fail-over cluster between this 2 domain controllers ( But both are in different domain literally, but in same forest )
    Process Validate cluster in dc.hg.corp
    dc.hg.corp can added, but iacdc.iac.corp failed (Error: You do not have administrative privilages on the
    server 'iacdc')
    Process Validate cluster in iacdc.iac.corp
    iacdc.iac.corp can added, but dc.hg.corp failed (Error: You do not have administrative privilages on the
    server 'dc.hg.corp')
    Technet please provide me a solution for this issue, So i can reduce server box counts.
    Thank you & Have a nice day.
    Shamil Mohamed

    Hi,
    We do not support combining the AD DS role and the failover cluster feature in Windows Server 2012.
    This behavior is by design.
    The related KB:
    You cannot add a domain controller as a node in a Windows Server 2012 failover cluster environment
    http://support.microsoft.com/kb/2795523
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The user does not have permission to perform the operation

    Hi,
    Configuration: JES Q405. Solaris 10 x86.
    My customer initially installed JES (Portal + AM + DS) on the same box.
    Now, they have a change in their requirement. They want DS to run dedicatedly in another box.
    I have successfully installed a fresh instance of DS in the new box with the same domain name (thus maintaining the same dn). I have copied over 99user.ldif and exported all the data from the original DS in the old box.
    Everything is running fine. DS in the new box is able to function properly.
    On the Portal and AM side, I have changed the following file:
    1. AMConfig.properties
    2. serverconfig.xml
    3. PSConfig.properties
    I have also changed the Primary LDAP entry in iPlanetAMAuthLDAPService, iPlanetAMAuthMembershipService, and iPlanetAMPolicyConfigService.
    However, when I started AM (which is running on Sun Web Server), I got the following error message:
    ------------------- in /var/opt/SUNWam/debug/amSDK ---------------------------
    05/01/2006 04:46:43:324 PM SGT: Thread[main,5,main]
    ConfigManager->Constructor: root DN dc=sg,dc=com
    05/01/2006 04:46:43:403 PM SGT: Thread[main,5,main]
    Invoking _ldapPool.getConnection()
    05/01/2006 04:46:43:403 PM SGT: Thread[main,5,main]
    Got Connection : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"cn=puser,ou=DSAME
    Users,dc=sg,dc=com"}
    05/01/2006 04:46:43:410 PM SGT: Thread[main,5,main]
    Invoking _ldapPool.close(conn) : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"c
    n=puser,ou=DSAME Users,dc=sg,dc=com"}
    05/01/2006 04:46:43:411 PM SGT: Thread[main,5,main]
    Released Connection : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"cn=puser,ou=
    DSAME Users,dc=sg,dc=com"}
    05/01/2006 04:46:43:411 PM SGT: Thread[main,5,main]
    ERROR: ConfigManager->Constructor: Caught exception Message:The user does not have permission to per
    form the operation.
    ------------------------------------ end --------------------------------------------------
    -------------------------- in /var/opt/SUNWam/debug/amAuth ---------------------
    05/01/2006 04:47:21:252 PM SGT: Thread[main,5,main]
    Directory Host: sg-dsq405.sg.com
    Directory PORT : 389
    05/01/2006 04:47:21:298 PM SGT: Thread[main,5,main]
    AuthD initializing
    05/01/2006 04:47:21:610 PM SGT: Thread[main,5,main]
    ERROR: AuthD failed to get auth session
    05/01/2006 04:47:21:688 PM SGT: Thread[main,5,main]
    ERROR: AuthD init()
    com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
    at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:709)
    at com.sun.identity.authentication.service.AuthD.<init>(AuthD.java:229)
    at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:494)
    at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
    at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
    at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
    at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
    at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
    at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
    ----------------------------------------- end --------------------------------------------------
    Any idea how to solve this problem? Thanks in advance!
    justCheeChong
    Message was edited by:
    justCheeChong

    check if the new DS instance has all the AM required ACI's.

  • Can't install the flash-plugin. (I do not have administrator rights - work...) In former versions I hadn't this problem I think...

    I can't install the flash-plugin... This, beacous I don't have installator rights... Earlier, in other versions of Firefox i could realy install this like other plugins. Frequently it was updated by other plugins...
    The flash-player (for Microsoft Explorer) is up to date... (supported by our helpdesk) - I could not ask the question at our helpdesk...

    If your helpdesk allows Firefox, they really need to allow Flash updates for the Firefox plugin.
    If you download the Flash plugin installer and try to install it outside the browser, does that work any better?
    http://get.adobe.com/flashplayer/otherversions/
    <br>''Windows 7 (64-bit)''
    <br>''Flash Player 11 for Other Browsers (64-bit)''
    Before hitting download, make sure to '''uncheck''' the box for the tag-along software of the day to avoid complicating things.

  • ERR_WIS_30253 and user should not have 'save' rights to public folder

    Hello
    Environment - BO XI 3.2 SP2, FP 3.6
    Source is SAP - BI 7
    I am trying to implement the security in the project for the very first time from scratch , and requirement is -
    there should be 3 type of user Groups - Super, Power and End users
    All the users have their own specifications, along with that, one common requirement is, in-spite of the group user belong to, should not have the rights to save the BO reports in the public folder but may save it to its Favorites.
    I have created one super users group and also assigned some rights to Reporting folder.
    But
    1. I am not getting any option to achieve the above mentioned requirement.
    2. I am getting Error ERR_WIS_30253 while trying to refresh the reports.
    Looking forward to have a quick reply from experts.
    Thanks in advance.
    Zeenat
    Edited by: Zeenat on Nov 14, 2011 7:20 PM

    Hi Zeenat,
    If you have observed in BO right collections are categorized as:
       General
       Content
       Application
       system
    For Err_WIS_30253:
    We generally follow the practice of creating custom access levels as per the business requirement and apply them on the folder level. If you're one of us, to resolve this issue for WEBI reports you would have to edit the custom access level applied on the folder by providing "Refresh report's data" privilege for 'Web Intelligence Report' in 'CONTENT' rights collection.
    The key is 'CONTENT' right collection. Its similar in BIP 4.x Platform with 'owner' privilege.
    Issue is resolved.:)
    If above practice is not followed in your org you could also provide above stated privilege on the folder containing the WEBI report.
    Hope this gives you some idea.
    Kind regards,
    Sandeep Rana

  • Win 2K8 R2 - Group Policy Management - Failed to Open Group Policy Object. You may not have appropriate rights. The network path was not found.

    New to Windows Server 2008 R2 Administration.
    I setup this Windows 2008 R2 Server on a Dell 2950 Poweredge server and have been migrating users off of an old NT style domain running on Samba 3.6 on CentOS.
    I have the domain setup (nicholas.sacredheartsaratoga.org), added users, and have moved users / computers over to the new domain and working.
    When attempting to setup Group Policy Objects, I continually get the "Failed to Open Group Policy Object" Error.  This is driving me nuts and seems to be a 49 error.. which I have done a ton of research on but none of the suggested fixes seem
    to be working.
    I've been working at this for a couple of weeks and really need this fixed to be able to set GPO's correctly.
    Here is my IPCONFIG /ALL
    C:\Users\Administrator.NICHOLAS.000>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : NICHOLAS
       Primary Dns Suffix  . . . . . . . : sacredheartsaratoga.org
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : nicholas.sacredheartsaratoga.org
    Ethernet adapter Local Area Connection 2:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
     VBD Client) #2
       Physical Address. . . . . . . . . : 00-1D-09-27-F1-63
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::542:43f2:2aaf:d903%13(Preferred)
       IPv4 Address. . . . . . . . . . . : 10.10.20.21(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.10.20.3
       DHCPv6 IAID . . . . . . . . . . . : 301997321
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-7D-DC-B6-00-1D-09-27-F1-61
       DNS Servers . . . . . . . . . . . : 10.10.20.21
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{41653A38-9372-4740-BB03-41950A9C9BC0}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 9:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes

    Will post the entire contents of my gpreport as soon as my account is verified... but this is the jist of the error being reported:
    Component Status<v:group alt="Error" class="vmlimage" coordsize="100,100" style="width:15px;height:15px;vertical-align:middle;"><v:oval class="vmlimage" fillcolor="red" strokecolor="red" style="width:100px;height:100px;"></v:oval><v:line
    class="vmlimage" from="25,25" strokecolor="white" strokeweight="3px" style="" to="75,75"></v:line><v:line class="vmlimage" from="75,25" strokecolor="white" strokeweight="3px" style="" to="25,75"></v:line></v:group>
    Component Name
    Status
    Last Process Time
    Group Policy Infrastructure
    Failed
    2/17/2014 2:50:06 PM
    Group Policy Infrastructure failed due to the error listed below.
    Logon failure: unknown user name or bad password. 
    Note: Due to the GP Core failure, none of the other Group Policy components processed their policy. Consequently, status information for the other components is not available.
    Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 2/17/2014 2:50:05 PM and 2/17/2014 2:50:06 PM.
    Registry
    (N/A)
    1/4/2014 1:45:29 PM
    Security
    (N/A)
    1/4/2014 1:45:35 PM
    User Configuration Summary

  • How to stop administrator rights for an user

    Hi,
    We had given the default user in all Mac systems administrator rights while installing the OS 10.3.X
    Now, as per our new policy, users should not have administrator rights. We have one administator login on the systems.
    Can someone help me on disbling the users Admin rights withour affect their data?
    Rgds
    Babu.S

    You should backup the NetInfo database before making any changes. Run the 500.daily script from the command line. You can copy the command from this post and paste it into the Terminal application:
    sudo sh /etc/daily
    Press the return key. Enter you admin password at the password prompt and press the return key.
    Open the NetInfo Manager and navigate to the group admin. You need to unlock the NetInfo Manager and enter your admin password. Remove the user from the field users. Click the lock to save the changes. If this doesn't work I'll hesitantly post the command line method.

  • Export failing with "The user does not have the required rights to perfrom

    We are testing an upgrade to BOXI 3.1.  We use the CrystalReportViewer .net web control to view the report.  When the export button is clicked and the Crystal Reports file format is selected, the following error message is displayed:
    "The user does not have the required rights to perfrom this operation. Please contact your administrator. "
    Notice that perfrom is not spelled correctly.  This is what actually gets displayed.
    I'm not too concerned about the spelling, but I do want to fix the error.  So I checked the security on the folder and the user does have full control.  Both advanced security options are selected:
    -View document instances that the user owns
    -Export the report's data
    So what else could be causing this?

    I had applied the full control access to the wrong group.  Once I applied that access to the user that actually generates the report, it worked.

  • The logged in user does not have permissions to perform this operation

    OIM 11.1.2.0.4
    Connector: Microsoft Active Directory User Management 11.1.1.5.0
    Action: revoke a provisioned AD account (logged in user is XELSYSADM member of SYSTEM ADMINISTRATIONS role)
    Error message: IAM-2050243 : Orchestration process with id 5756, failed with error message IAM-4065011 : An error occurred in oracle.iam.provisioning.spi.DOBProvisioningMechanism/revoke(Account) while revoking account with id 1 for the user with key 43 and the cause of error is The logged in user does not have permissions to perform this operation..

    The problem is missing entries into table AAD, Provisioning API uses table AAD to check administrator's scope on the user's organization.
    TEST: following SQL statement should return at least a value
    select aad_write, aad_delete
    from aad aad
    , usr usr
    where aad.act_key = usr.act_key
    and usr.usr_key = <user_key_of_user_you_wanto_to_revoke>
    and aad.ugp_key in (
    select ugp.ugp_key
    from ugp ugp
    , usg usg
    where ugp.ugp_key = usg.ugp_key
    and usg.usr_key = <user_key_of_xelsysadm>
    BUG (in my case): if you create an Organization using a OIM user that does not have any Role (except default ALL USERS Role) the system does NOT add right entries into AAD table, so you can revoke account of users that are members of this Organization
    WORKAROUND: manually insert entries for all Organizations (ACT_KEYs) for the user XELSYSADM into AAD table
    FIX: always create an Organization using a OIM users with at least one Role except ALL USERS role

  • The user does not have sufficient privileges to install Adobe Flash Player

    Hi, I'm having a very hard time installing the newest version of Adobe Flash player.  When I run the installer I get the error message "The user does not have sufficient privileges to install Adobe Flash Player".  This all started after Flash had given me several popups about a new update, but the update wouldn't install correctly.  Eventually I uninstalled Adobe Flash and I've been unable to reinstall it at all since.
    I'm running Windows 7 64 bit, and I do have an administrator account.  I'm trying to isntall the Flahs plugin for Firefox, but it also wont work in IE.  So far I've tried running the instaler as an administrator, doing a clean install and running the installer from another user account (also an administrator).  None of these things have worked, and I can't find any other suggestions.
    Thanks in advance for your assistance!

    Download the offline installers from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header and save them to disk, then right-click on each installer and select 'Run As Administrator'.

  • "The Loged On user does not have permission to use this object" error

    Hi
    I've created a form that is used by a customer which allows for certain draft documents to be approved and then once approved they are created. The problem that I am having is that when the users attempt to update the changes on the form an error is logged, which is shown below:
    "Error: -3000
    The Loged On user does not have permission to use this object
    System.Runtime.InteropServices.COMException (0xFFFFF448): The Loged On user does not have permission to use this object"
    Once the update button is pressed then a User Defined Table and Drafts are both updated with the relevant modified UDFs from the form.
    If I log onto their system then I don't seem to get any issues. To me it looks like a user authorisation problem but the ones who have used the form seem to have the relevant licences.
    Do you have any idea why this error could be occuring?
    Thanks a lot.
    Steve

    Hi,
    Go to Administration --> System Initlization > Authorizations> General Authorizations not expand all and check if the service call is given full *Read & Write * rights to the required user.
    If not then give full rights and check the add on.
    Hope it helps,
    Vasu Natari.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • 'The logged-on user does not have permission to use this object'

    Hello everyone,
    I am getting the message 'The logged-on user does not have permission to use this object' while saving the Sales Order. I am logging in as a CRM user. There is an addon also running on the server, that saves some data into a user defined table when the Sales Order is saved. Is there any authoisation for users to access user defined tables.
    Regards,
    William

    hi William,
    this is an Authorization issue. provide the user with authorization on your UDT. Definition of user authorization can be found in Administration -- >> System Initialization -->> Authorizations -->> Additional Authorization Creator.... if already defined from here you can fined the additional authorization from the General authorization window.
    regards,
    Fidel

Maybe you are looking for