User erxit error in quality server bt working proper in development

Hi ,
i enhanced user-exit in EXIT_SAPLEINR_002 for pass batch number in migo
it is working in development correct and when i transport it to quality its not working .
bt i check this function and execute it sepretely its working bt not working in migo
alos i checked it by break-point . bt program  not stoped at break-point .
tell me how i can correct it .

hai bhavesh,
all the work u have doen in developmetn might not be transported to quality,
check wether the project is active or not
regards
afzal

Similar Messages

  • Connection error detected  fulfillment server  previously worked

    I am getting the mesage connection error detected.  Digital Editions could not connect to the fulfillment server.  Please make sure you are connected to the internet.    I am able to go on line to try and figure out the problem, but i can't move downloaded library book to ADE.  Why?  Do this regularly w/not many problems.  others are visual c++ runtime library, but book eventually can be loaded onto my Nook.

    Two possibilities, not sure if either will help but worth a try ...
    1) ~~~~~
    Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
    Uninstalling and reinstalling does not help.
    Unfortunately, it often then gives misleading error messages about what is wrong.
    A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
    This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
    Restart ADE, and then reauthorize with your (old) Adobe ID.
    In extreme cases on the mac, the following extra step has helped some people.  Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
    2) ~~~~~~~~~
    There are lots of bugs in ADE2.0 (and 2.0.1).  Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
    Some people have found ADE trying to upgrade automatically. 
    It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
    Probably best to say no if 2.0.x installation asks if you want to migrate your library.

  • Addition of new fields to existing Infotype: Error in Quality Server.

    Hi Experts,
    I have added new fields by adding custom include to Infotype 4000 using t-Code PM01.  It is working perfectly fine in DEV. But, in QLT, the custom Include is not attached to the P4000 structure. Independently, CI_P4000  exists in QLT.
    I have checked all the Transport Requests, nothing is missing. However, The structure of P4000 is not getting modified as per requirement. What should I do?

    Hi Experts,
    The Error was coming with Infotype 4000. I tried adding the same field by updating Infotype 4001 and it worked. So, I have used that only, and my requirement is fulfilled.
    But, I am still not sure if we can add field in similar way in Infotype 4000.
    Thanks to all for providing me with possible solutions!!
    Regards,
    Shruti Gupta.

  • Error while starting Quality Server

    Dear All,
    I am getting the following error while starting the Quality server.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    hgazfsrv:azfadm 1> startsap
    Checking AZF Database
    ABAP Database is not available via R3trans
    Starting SAP-Collector Daemon
    open logfile '/usr/sap/tmp/dev_coll.tmp' failed... use stderri
    19:04:58 06.04.2010 ERROR:  cannot open log file /usr/sap/tmp/dev_coll.tmp
    19:04:58 06.04.2010 ERROR:  Make sure directory /usr/sap/tmp exists or specify D
    IR_PERF
    19:04:58 06.04.2010 ERROR:  in profile and run saposcol pf=<profile>
    saposcol already running
    Running /usr/sap/AZF/SYS/exe/run/startdb
    Trying to start AZF database ...
    Log file: /home/azfadm/startdb.log
    HQS database started
    /usr/sap/AZF/SYS/exe/run/startdb completed successfully
    Starting SAP Instance DVEBMGS07
    Startup-Log is written to /home/azfadm/startsap_DVEBMGS07.log
    Instance Service on host hgazfsrv started
    Instance on host hgazfsrv started
    hgazfsrv:azfadm 2> +
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Operating System: AIX:503
    SAP: ECC6
    DB: Oracle 10.2.0.2
    The application is starting and working satisfactory, but is there any effect in any ways??
    I have checked the file path   /usr/sap/tmp/ , and the file is phycally existing, even if I restart the application I get the same error every time.
    Any solution??
    Thanks in advance.
    Regards
    Bhaskar.

    Hi Uday,
    19:04:58 06.04.2010 ERROR: cannot open log file /usr/sap/tmp/dev_coll.tmp
    19:04:58 06.04.2010 ERROR: Make sure directory /usr/sap/tmp exists or specify D
    IR_PERF
    for resolving the above error , pls do the following
    1. Login to OS with sidadm user
    2. Stop saposcol ( saposcol -k )
    3. now login on OS with root user
    4.  goto exe directory ( /sapmnt/<sid>/exe )
    5.  Run command chown root:sapsys saposcol
    6. Run command chmod 4750 saposcol
    7. Login with SIDADM and run command :- sapsocol -l
    8. also check folder /usr/sap/tmp exists or not ., if folder already exists then rename file dev_coll.tmp
    An if folder /usr/sap/tmp eixits and file is not present there then , simply stop and start SAP.
    Now while starting SPA you should not get the error which you were getting previously.
    Thanks
    Anil

  • I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding."  I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

    I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding."  I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.  Thanks

    sandyzotz wrote:
    Other wise, I probably best return for a refund and get a Samsung.
    Unlikely.  Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
    Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

  • 'Screen does not exist' error after transported to Quality server.

    I have a report program which is working fine in development server. It is transported to quality server and when executed it throws dump. There is a CALL SCREEN statement in the program and the dump shows screen 1001 does not exists. I checked the program on quality server and when i double clicked on the screen number, it tells screen 1001 does not exist and do you want to create??. I rechecked the program in Development server and confirmed everything is active and have been catched in the transport request. When I checked with the basis guy, he said there was a component conflict error with the request while transporting and he overrided it.
    Please tel me what should I do to solve this issue. Its very urgent. Please help.
    Thanks
    Johan

    Hi
    You seem to have run into some trouble with transports. Did someone perhaps develop this report in the QA  server?
    I would suggest this:
    In SE80. display your report. Then in the hierarchy on the left, right click on your report and select 'write transport entry' . This option will ask you to create a new transport for your report and all objects inside it. Take that transport to the QA server. It should include the entire report, including screens.
    If you have trouble importing into the QA server, please provide the transport logs here.

  • Cannot connect to SERVER. Login failed for user 'DOMAIN\user'. (Microsoft SQL Server, Error 18456) - SQL Server 2012 on Windows Server 2008 R2

    I've seen multiple blogs and forums with similar problems and SQL 2012 or 2008. But no solutions that work for me.
    I have installed SQL Server in mixed mode (SQL and Windows authentication). I can create new Login accounts in either mode. However, I cannot get an AD security group Login account to work. I am trying to add group 'DOMAIN\Domain Admins' or 'SERVER\Administrators'
    as a Login so that any of the domain's administrator accounts can open SQL Server Management Studio and act as an 'sa' account on this server.
    I have deleted the SQL account 'DOMAIN\Domain Admins'.
    I have restarted SQL.
    I have restarted the Win2K8r2 server.
    I have launched SSMS as Administrator from the desktop of SERVER.
    I have launched SSMS as another user (and used 'DOMAIN\user' to lauch it) from the desktop of SERVER.
    I can create a login account named 'DOMAIN\user' (who happens to be a member of the 'DOMAIN\Domain Admins' group) and give this account 'sa' security, and when I do that, this account works as expected...
    How do I add a security group as a Login account and give all members of that group the ability to be an 'sa' account?

    Hi geoperkins,
    Are you getting the following error message?
    Error: 18456, Severity: 14, State: 11
    Login failed for user <Domain\user>. Reason: Token-based server access validation failed with an infrastructure error.
    If that is the case, the issue could be due to that the Windows login has no profile or that permissions could not be checked due to UAC. Please disable UAC firstly and check if it is successful to log in SQL Server.
    Another reason could be that the domain controller could not be reached. You may need to resort to re-creating the login. Create a new group in AD, add users to the new group, then add the group to the local admin group and create login for the group in SQL
    Server.
    There is a connect item describing similar issue for your reference.
    https://connect.microsoft.com/SQLServer/feedback/details/680705/cant-login-to-sql-using-windows-authentication-when-user-is-in-a-domain-security-group
    For more details about above error, please review the following blog.
    http://sqlblogcasts.com/blogs/simons/archive/2011/02/01/solution-login-failed-for-user-x-reason-token-based-server-access-validation-failed-and-error-18456.aspx
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Workflow not working in Quality Server

    Hi All,
    I had configured a workflow and it was working fine in the Develpment and then we moved it to Quality.I have tested it several times and it was working fine.In the quality server changes cannot be made and so evertthing would be in Dispaly mode.
    But now its not working in Quality where as it is working in Dev.
    Can anyone help me on this.
    Thanks

    B,
    As it is not very much clear as of what 'kind' of problem you are facing, following might be possible
    Workflow did not tigger at all
    - Event Linkage is down - check in SWEC/SWETYPV, also check SWEL for event receiver
    - Workflow definition is not activated  - check in SWDD, you can always activate
    Workflow Triggered but ended in technical error
    - check bindings
    - check business object(s) are generated
    - check methods are free of error
    - in case of send mail error, check mail ids
    Workflow Tiggered but ended in logical error
    - check workflow logic
    Hope this helps
    MK

  • Mavericks mail server "user unknown" error

    For some reason, the mail server bounces the email sent to local network users and returns a "user unknown" error. The same error is received when an email from an external domain is sent to one of the open directory associated email addresses.
    However, sending email from these accounts works just fine, just like sending and receiving email associated with the diradmin account.

    Hi Jeffrey,
    Changed the mx record to the juffrou......net domain, without succes.
    Please find the export below.
    Regards,
    Lex
    juffrouwjannie:~ xandstorm-juffrpuw-jannie$ sudo serveradmin settings mail
    Password:
    mail:postfix:smtpd_pw_server_security_options:_array_index:0 = "cram-md5"
    mail:postfix:smtpd_pw_server_security_options:_array_index:1 = "digest-md5"
    mail:postfix:smtpd_pw_server_security_options:_array_index:2 = "gssapi"
    mail:postfix:smtpd_pw_server_security_options:_array_index:3 = "login"
    mail:postfix:smtpd_pw_server_security_options:_array_index:4 = "plain"
    mail:postfix:spam_quarantine = "[email protected]"
    mail:postfix:smtp_reject_list_enabled = no
    mail:postfix:smtp_sasl_auth_enable = no
    mail:postfix:submit_cred:juffrouwjannie.vanderwerff.net:username = "submit"
    mail:postfix:submit_cred:juffrouwjannie.vanderwerff.net:password = "lvFBZ9973YcUBWtAPEX7Dq"
    mail:postfix:submit_cred:XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local:username = "submit"
    mail:postfix:submit_cred:XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local:password = ""
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_userid = ""
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_pwd = ""
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_host = ""
    mail:postfix:client_permit_mynetworks = yes
    mail:postfix:smtpd_tls_cert_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.cert.pem"
    mail:postfix:maps_rbl_domains_enabled = yes
    mail:postfix:spam_subject_tag = "***JUNK MAIL*** "
    mail:postfix:smtpd_tls_CAfile = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.chain.pem"
    mail:postfix:message_size_limit_enabled = yes
    mail:postfix:virus_db_last_update = "2014-04-19 19:50:45 +0000"
    mail:postfix:mail_enabled_groups = _empty_array
    mail:postfix:add_whitelist_domain:_array_index:0 = "XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local"
    mail:postfix:add_whitelist_domain:_array_index:1 = "vanderwerff.net"
    mail:postfix:virus_scan_enabled = no
    mail:postfix:spam_notify_admin_email = "[email protected]"
    mail:postfix:virus_db_log_level = "info"
    mail:postfix:black_hole_domains:_array_index:0 = "zen.spamhaus.org"
    mail:postfix:spam_ok_locales = "en"
    mail:postfix:spam_scan_enabled = yes
    mail:postfix:virus_quarantine = "[email protected]"
    mail:postfix:reject_unauth_piplining_enabled = no
    mail:postfix:spam_rewrite_subject = yes
    mail:postfix:message_size_limit = 10485760
    mail:postfix:mynetworks:_array_index:0 = "127.0.0.0/8"
    mail:postfix:mynetworks:_array_index:1 = "[::1]/128"
    mail:postfix:virus_log_level = "info"
    mail:postfix:host_whitelist:_array_index:0 = "juffrouwjannie.vanderwerff.net"
    mail:postfix:rbl_override_list = _empty_array
    mail:postfix:greylist_enabled = no
    mail:postfix:list_server_log_level = "info"
    mail:postfix:group_expansion:start_interval = 10
    mail:postfix:group_expansion:enable_group_expansion = no
    mail:postfix:virus_notify_recipients = no
    mail:postfix:luser_relay_enabled = no
    mail:postfix:mydomain = "vanderwerff.net"
    mail:postfix:enable_list_server = yes
    mail:postfix:mydestination:_array_index:0 = "localhost"
    mail:postfix:mydestination:_array_index:1 = "$mydomain"
    mail:postfix:virus_notify_admin_email = "[email protected]"
    mail:postfix:enable_virtual_domains = no
    mail:postfix:spam_notify_admin = no
    mail:postfix:required_hits = 6
    mail:postfix:add_whitelist_host:_array_index:0 = "juffrouwjannie.vanderwerff.net"
    mail:postfix:always_bcc_enabled = no
    mail:postfix:enable_var_mail = no
    mail:postfix:enable_smtp = yes
    mail:postfix:smtpd_tls_key_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.key.pem"
    mail:postfix:relayhost = ""
    mail:postfix:mynetworks_enabled = no
    mail:postfix:virtual_domains = _empty_array
    mail:postfix:spam_ok_languages = "en"
    mail:postfix:rbl_override_enabled = no
    mail:postfix:log_rolling_days = 1
    mail:postfix:enable_smtp_in = yes
    mail:postfix:virtual_users_maps = _empty_array
    mail:postfix:tls_server_options = "require"
    mail:postfix:spam_action = "deliver"
    mail:postfix:log_rolling_days_enabled = yes
    mail:postfix:list_server_post_to_archve = no
    mail:postfix:spam_log_level = "warn"
    mail:postfix:smtp_uce_controlls = 1
    mail:postfix:relayhost_enabled = no
    mail:postfix:list_server_share_archives = no
    mail:postfix:virus_action = "delete"
    mail:postfix:virus_db_update_days = 12
    mail:postfix:virus_notify_admin = no
    mail:postfix:domain_whitelist:_array_index:0 = "XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local"
    mail:postfix:domain_whitelist:_array_index:1 = "vanderwerff.net"
    mail:postfix:enable_smtp_out = yes
    mail:postfix:text_only_attachments = no
    mail:postfix:reject_unknown_client_enabled = no
    mail:postfix:log_level = "info"
    mail:postfix:myhostname = "juffrouwjannie.vanderwerff.net"
    mail:global:auto_auth = no
    mail:global:skip_enable_service_check = no
    mail:global:service_data_path = "/Library/Server/Mail"
    mail:imap:aps_topic = "com.apple.mail.XServer.0051960a-2429-481a-b784-c073eed597e1"
    mail:imap:servername = ""
    mail:imap:imap_auth_clear = yes
    mail:imap:auth_gssapi_hostname = ""
    mail:imap:admins = _empty_array
    mail:imap:lmtp_luser_relay_enabled = no
    mail:imap:lmtp_luser_relay = ""
    mail:imap:pop_auth_clear = yes
    mail:imap:enable_listid_autosave = "no"
    mail:imap:max_imap_connections = 1000
    mail:imap:log_level = "info"
    mail:imap:tls_key_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.key.pem"
    mail:imap:imap_auth_plain = yes
    mail:imap:postmaster_address = "[email protected]"
    mail:imap:quotawarn = 80
    mail:imap:enable_quota_warnings = no
    mail:imap:pop_auth_gssapi = no
    mail:imap:junk_mail_userid = "junkmail"
    mail:imap:global_quota = 0
    mail:imap:partitions = _empty_array
    mail:imap:tls_ca_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.chain.pem"
    mail:imap:enforce_quotas = no
    mail:imap:not_junk_mail_userid = "notjunkmail"
    mail:imap:imap_auth_digest_md5 = yes
    mail:imap:request_enable_webmail = no
    mail:imap:client_cert_enabled = no
    mail:imap:aps_topic_enabled = yes
    mail:imap:imap_auth_gssapi = no
    mail:imap:tls_server_options = "require"
    mail:imap:pop_auth_apop = yes
    mail:imap:quota_full_tempfail = yes
    mail:imap:imap_urlauth_host = " "
    mail:imap:enable_imap = yes
    mail:imap:postmaster = "postmaster"
    mail:imap:enable_pop = yes
    mail:imap:partition-default = "/Library/Server/Mail/Data/mail"
    mail:imap:imap_auth_login = yes
    mail:imap:enable_sieve = yes
    mail:imap:imap_auth_cram_md5 = yes
    mail:imap:notification_server_enabled = yes
    mail:imap:tls_cert_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.cert.pem"

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • "Sharepoint 2013" is giving error that prevents local domain users authentication for "Team Foundation Server"

    I am getting 2 errors through the event viewer that prevents TFS 2013 authentication for local domain users, also this error started appearing after having TFS upgraded to [ 12.0.30723.0 (Tfs2013.Update3) ].
    1st Error (from administrative events):
    The Execute method of job definition Microsoft.SharePoint.Administration.SPUsageImportJobDefinition (ID a51a0244-765d-433b-8502-0bb0540ad1fd) threw an exception. More information is included below.
    Access to the path 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS' is denied.
    Tried so far:-
    - changed the path to another folder from "Diagnostic Logging" in another drive, but still getting the same error.
    2nd Error (from application server):
    DistributedCOM error
    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID 
    {000C101C-0000-0000-C000-000000000046}
     and APPID 
    {000C101C-0000-0000-C000-000000000046}
     to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
    Which I already got fixed using the following steps on a thread I opened before (but still getting the same error).
    https://social.technet.microsoft.com/Forums/windows/en-US/3896e35c-b99a-4d30-b662-f92d337c8d6f/windows-servers-components-services-and-regedit-permissions-are-grayed-out-for-my-admin-account?forum=winservergen
    Other Fixes I tried
    - Found on another topic that it is not sharepoint that is causing the problem, but it is the generated ASP.NET web pages used for testing is causing the memory to fill up due to cashing on RAM, the fix suggested to change IIS cashing from RAM to HD to prevent
    loading up using w3wp.exe from processes. 
    Concern
    - by checking other topics for people having the same problem, it was mentioned that this error appeared after the lastest TFS update, is there is a fix for it ?

    Hi Kpdn, 
    Thanks for your post.
    All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error while transporting the badi from dev to quality server

    Dear Freinds
             Iam getting the error  " Method Execution   21.11.2007 11:55:03    (8) Ended with errors "
            i expended the error (with return code as 8)  and i found th below errors
    Multiple active implementations for definition HRECM00_CALCBASE
    Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
    AFTER_IMP_SXCI belongs to package SECE   --- what does this mean??
    The errors affect the following components:
        BC-DWB-CEX (Customer Enhancements)
    What exactly this error iam not able to trace . Before releasing the object from the
    development server i have see any error's are there the extended check hasnt given me any errors either.
    The help for this error says that
    "Procedure
    Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
    You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
    i have did what sap has said ............. i can see that in the quality server a custom badi
    of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
    any one have idea on this error pleae let me know.
    regards
    saymala r.

    hi Raju,
    i tried after giving full access but again same error:-
    please see the error log below:-
    Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
    Member formula expanded for imported master data
    Start of data checker messages for Appset PETFAS
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Error occurs when checking member formula use on other dimensions
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
    BPF: Error reading master data
    No access to environment 'PETFAS'
    End of data checker messages for Appset PETFAS
    End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
    Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
    End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
    Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
    UJT_AFTER_IMPORT belongs to package UJT
    The errors affect the following components:
        EPM-BPC-NW-TRA (Transport)
    any suggestion..
    thanks,
    Ambika

  • HT1694 I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

    I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

    bump? Is bumping allowed? Lol.
    I just really need some help here.

  • Unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????

    unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????

    Just a quick bump... Anyone got any thoughts on this?

  • Time out error in MIRO in prd , but takes times to Quality server

    Hi all,
    In the sap standard transaction MIRO, in Production while executive , time out error is coming in dump, while when i execute the same tranaction in Quality server, It takes 1 hrs time , but transaction is suceesful.
    What would be the problem.
    Thanks .
    Lolo.

    Amit Gujargoud wrote:>
    > >
    sekhar manda wrote:
    > > Try after some time i think it won't goes to dump
    >
    > My motor bike is not giving good mileage. Okay I'll go inside my house and come back in few minutes. May be it will give me amazing mileage!
    No need to go inside and come, just RESTART the bike,  its just a typical software engineer's solution

Maybe you are looking for

  • Select in stored procedures 11g

    I come from MS Sql Server, so select statements in Oracle are confusing, I have only 3 days experience with Oracle 11g I have managed to use SELECT INTO in my SP Can anyone provide an example of select using a for loop_+  AND  an example of select us

  • Auto resize webpage?

    i have just finished my site which can be seen here www.jbpermanentcosmetics.co.uk The site looks fine on my Macbook pro on Mac and windows but it is way too large for 4:3 monitors. The site width is 1200 which in hindsight is too large really but i

  • I am not able to access my contacts, calendar on icloud

    I am not able to access my contacts, calendar on icloud.  I get the message"unable to load...There was aproblem loading the application"  Any ideas?  I have an iphone 4 and am using Windows Vista.  Had no problems before

  • Related with EDIMSG table.what does the field ACTFLAG stand for in EDIMSG.

    Hi Gurus, Can anyone tell me what does the field ACTFLAG flag stand for in EDIMSG table.Does it mean that if the ACTFLAG field = 'X',than the particular release is no more used in SAP. Because even if I create a partner profile with MATMAS01 as basic

  • Replacement for UTIL_FILE exception of NO_DATA_FOUND

    A few years ago, I had code that processed an exception called: UTL_FILE.NO_DATA_FOUND. In fact, I have used this in cursors as well and have found that this does not work. What is the replacement?