User Event Case getting tied up for long duration in LV 2009 (with SP1)?

Quick question here...is there any decent reason the user event case is getting tied up for long durations in LV 2009.SP1? In 8.5 I never had an issue with my code doing this, though when converting to 2009.SP1 I am running into huge lock-up issues with the user event case.

I have not seen aby issues...
You are saying that the code from LV8.5 (unmodified) behaves differently in LV2009 SP1?
Can you post your code?

Similar Messages

Some users continue to get overdue notices for an approval workflow.

Some users continue to get overdue notices for an approval workflow that has already completed and approved. How to stop the overdue notices. And there are no tasks running in the task list.
Thanks
Ramanjjilu Naidu

Rama,
Usually these happen from restored/QA env which give us false impression.
Check similar thread -
SharePoint
Approval workflow Overdue emails after workflow completion
Overdue
task reminder even after task /library deleted
Task
overdue emails even after deleting all tasks
Workflow
Task overdue notifications
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Whenever I browse the apple website for long duration on my it ouch 4g the safari web page suddenly gets stuck

Whenever I browse the apple website for long duration on my it ouch 4g the safari web page suddenly gets stuck&Goes off &am left on the homescreen I have an ipodtouch 4g 32giggs with ios 5.0.1&is non jailbroken so if any suggestions please reply!

Boo. I can't edit. Sorry...
I also want to note that my iPad is -not- rooted and is quite new. And also that it's a third generation iPad.

Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

Hi,
Did the issue happen only for you or for multiple users?
Make sure phone update to the latest firmware.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

CFSTKE* Queues with few entries executing for long durations (10 hrs)

In APO 7.0 the CFSTKE* Queues with few entries executing for long durations (10 hrs)
Below are the FM from the queue
/SAPAPO/CIF_IRQ_REDUCT_INBOUND
/SAPAPO/CIF_STOCK_INBOUND
/SAPAPO/CIF_SL_DOC_INBOUND
/SAPAPO/CIF_SL_DOC_INBOUND
Do any one have the same problem and any fixes ?
Thank You

Hi Aravind,
What is the status of your queue:
Is it in status running, ready or sysfail?
If it is in "Running" status since last 10 hours then check the following things:
Check SM51 and see if you find a long running process, see if it is trying to do a sequential read on some table.
If yes then ask your Basis team to run ST04 and see what index it is using,
If that is also fine then ask them to check stat on that table.
Builiding stat may help if a read on table is taking long time and index which is being picked up is correct.
Your basis team should be able to help you.
I hope it helps.
Thanks,
Anupam
Edited by: Anupam Sengar on Aug 11, 2011 12:06 AM

BPM Process Sleep / Wait for long duration - is it feasable in SAP PI?

Hi
We have a business requirement where based on a particular date in the future, we require a message we receive to "wait" until that date before it can bed processed (several weeks/months).
I understand that there is a "wait" step in CCBPM - has anybody had any experience with using this step for "long running processes".
When using this, is SAP PI intelligent enough to "sleep" and free resources for this process until the date arrives in the wait step?
What happens with other messages hitting the BPM and there is a process on a wait step? Can queing be setup that subsequent messages that are not on a wait step be processed ahead of the BPM sitting on a wait step?
Are there any other better solutions in SAP PI instead of using BPM wait for a long running transaction (several weeks)?
Thanks in advance.

Hi,
AFAIK it's an anti pattern to run a process over such a long time.
Here it's said that at should not longer run than a few days:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/d92e428819da2ce10000000a1550b0/frameset.htm
But even a day is quite a long time.
All informations of the process must get stored and it's very memory consuming specially if you expext a lot process instances.
It would try to avoid this situation.
Regards
Patrick

How long should a new battery last when installed for a mac book pro 2009 with only a web browser opened?

I recently went to the apple store in Covent garden and had a battery replaced for my Mac Book Pro 2009 edition.
After fully charging the mac the percentage guage meter displays the battery is losing power fast. 1% increments goes down every 5 minutes even if I have only a browser which is opened and no other running applications.
My recent test after a fully charged mac book pro allowed me a maximum use time is 2 hours!
I have friends and family members who have the same model as me and their mac book when running on battery, shows that the laptop has about 6 hours use. They are able to run multiple applications and use sites such as Youtube and still get a good 4 hours of use.
Anyway, I have booked an appointment with a Mac Genius for tomorrow to look into this issue.
I thought I'd just ask the community to find out if any of you can help.
Many thanks in advance.

Thank you Donald.
You are the second person to tell me this so this is more of a reason for Apple to sort out issue for me.
The team there don't believe there is an issue with the battery.
Thank you once again.

Is there anyway to get driver support for Cannon MG3500 series printer compatible with Mavericks ?

Just bought a Cannon MG3500 series printer. Apparently there is no driver for this unit that is compatible with Mavericks. Does anybody know of a solution?
Help appreciated.

Have you tried Canon's Web site for the Mg3500 Series?
Click on the Operating System list and select OS X Mavericks v10.9; then the Drivers section below it to download drivers.

Need more info on solving script errors -- don't have Webroot on my computer, but it gets tied up for hours at a time with Mozilla script blockages !!!!

Whenever I am logged into FF, my computer will eventually grind to a halt -- sometimes after a few minutes, and sometimes after a few hours. I then get the script error message shown below.
"A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete."
<nowiki>**************************************************************************</nowiki>
Below that generic message is one of these specific messages:
Script: resource://gre/modules/XPCOMUtils.jsm:320
https://secure.wlxrs.com/w!xbEiA1hkt!tswyuOeDSQ/litedepex.js:1
resource://gre/modules/XPCOMUtils.jsm:323
resource://gre/modules/XPCOMUtils.jsm:325
resource:///components/nsPrompter.js:434
https://gfx7.hotmail.com/mail/16.2.7137.1204/c2a.js:1
resource://gre/modules/XPCOMUtils.jsm:325
https://secure.wlxrs.com/w!xbEiA1hkt!tswyuOeDSQ/wlive.js:1
https://secure.wlxrs.com/_D/w!xbEiA1hkt!tswyuOeDSQ/jquery-min.js:47
chrome://global/content/bindings/textbox.xml:98
chrome://mozapps/content/downloads/download.xml:71
Script: https://mail.google.com/_/mail-static/_/js/main/m_i,t/rt=h/ver=am293eyFlXI.en./sv=1/am=!v8Czf-oeNMn0BO3a1PgLcnZDWwl3f6w7siCzO0WZ4q30IbVM6NJqQEKHLeJhMzB_YcWyBQ/d=1:2729
http://pagead2.googlesyndication.com/pagead/osd.js:12
https://gfx7.hotmail.com/mail/16.2.7137.1204/cmpt0.js:1
http://mail.yimg.com/zz/combo?nq/launch/common-neo-base_6549.js&nq/launch/common-neo-om_6549.js&nq/launch/search-neo_6549.js&nq/launch/inbox-om_6549.js&nq/launch/inbox-listview-new_6549.js&nq/launch/inbox-message-new_6549.js&nq/launch/inbox-minty-fresh_6549.js&nq/launch/inbox-base_6549.js&nq/intl/js/launch/lang_en-US_6549.js&nq/intl/js/launch/conf_us_6549.js:194
<nowiki>************************************************************************************</nowiki>
I have no such problem with Internet Explorer or when the computer is not connected to the Internet; it is specific to FF. I do not have Webroot Spysweeper on my computer.
Strangely enough, we do not have this problem with two other PCs that use FF, nor did I have it on these two computers during the first few years that I used them with FF. I bought a new PC, moved my files onto it, then suddenly it had the same problem, which is what made me think it was a malware issue.
I checked Windows Defender and found that was not switched on and could not be switched on. So I bought three different anti-malware programs beginning with Malwarebytes and then SpyBlaster and SpyBot S&D. But they did no good.
Just pressing the "continue" button in response to the script error message does not good, since it allows the computer to continue grinding to a halt. Worse, if those scripts are malware, I don't want them sending private info to internet sites, which is apparently their function.
Please help me root out the problem. It has made my computer inoperative for several hours a day for the past few months.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

I want to know why I can no longer get payment options for an online game I play with the firefox browser?

when I try to purchase items on my online game I can no longer buy them.For some reason firefox stops the payment options from showing.I choose what I want to buy but when it comes to paying for it thats when nothing happens.No payment option is offered.All that is there is what I have picked to buy.Before it would offer payment options when I had picked what I wanted to purchase but this no longer happens and no payment options are given.It is left like that until I stop and just leave.I would like to know why it now does this?
I got offered firefox beta and installed it.That is when it started doing this.I have cleared my cache,browser and history then restarted firefox a number of times now and still the problem persists.Can you please assist me please to somehow put it right back to the way it was before.Thank you for your time.

You can try to (re)install the current Firefox 17.0.1 release if it isn't working with the current Firefox 18 beta
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Wifi network not recognized for long duration after WPS button pressed on ap

I have a TP-Link TP-WA901ND (access point) and it has been working flawlessly I pressed the WPS button on the device to get a wireless printer to acknowledge the network.
Now after 10hrs all the devices and computers see the network except for my z10 and BOLD 9300 until I power cycle the device.
Any ideas?

Hello RonnonF
Please read these useful articles;
• KB14477 Unable to connect to a Wi-Fi network on the BlackBerry smartphone
• Speed up BlackBerry Wi-Fi connections a knottyrope...
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

HT5593 How do i get sms support for two step verification in Canada with Telus ?

i have followed the procedure for setting up two step authentication and the part where it's suppose to send me an sms code is where it fails. the code just never comes. anyone else having this issue ? fyi, im in Canada and using telus.
i know when they first announced two step verification in Canada sms support was not there but now it's listed specifically for Canada and Telus on Apple support page. so what's the issue ?
i know Apple has had tons of issues with sms codes outside the US but i figured by now they would get it right so i'm hoping there's just something i'm missing.

i've even tried putting my sim card into a non-iphone, still no luck.
Then how on earth is the iPhone the issue????
Oh wait, it isn't.
Unbelievable...

How do I get search typing for Contacts Search function on Iphone with 2.0?

An ad for 2.0 iphone update says:
"Contacts Search
Have a lot of names in your address book? Type a name into the new Contacts search field and iPhone shows you matching names."
Now I have 2.0 and can't find a way to get into the Contacts search field. Anyone having better luck with that? Please help.

Did you just install 2.0? Is your contact list showing you your first entry when you open it? Try scrolling up to the top of your list.

HT5429 I live in Iceland, now I always get " No direction for this destination" It worked fine with Google maps, what can I do, can I revert to OS 5?

I live in Iceland, now after downloading OS 6 on my iphone 4S, no directions for any destination what so ever, are available anymore on the Maps app. It worked just fine previously. What can I do ?

Annewin wrote:
I can no longer choose Lab color under mode because many option are greyed out.
Anne when a feature is not compatible with the active document Photoshop will gray out the features in its menus. For example if you are editing an HDR image in 32 Bit color mode. Many Photoshop features do not support 32 Bit Color so they will be grayed out. Lab for sure will be grayed out as will many other menu items.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

How to get pop-up for entering some value on it by user on Adobe INTERACTIV

Hello
We are developing a interactive adobe form,
1) User would like get some popups for entering the values in the popup and clicking either OK or CONTINUE, pls. let me know how to handle this?
2) can i get CALENDER, when user tries to input DATE entry? how its?

Hi,
You can create a subform overlapping you main body page and you can use this subform as pop-up.
You just need to do following things:
1. Create a subform over you main body page in the area where you want to show the pop-up, say SF_POPUP is the name of this subform.
2. Give it a background colour(So that it looks different from the main page).
3. On this subform SF_POPUP, create the fields you want the user to enter. along with these fields create a button 'OK' or 'Continue' as per your requirement.
4. Write the below code on click event of this button:
SF_POPUP.presence = "Hidden".
5. On you main body area create a button to show this popup and write the below code on it:
SF_POPUP.presence = "Visible".
6. By default set this popup SF_POPUP as hidden from subform properties.
Hope this will help for your first requirement, for your second requirement Arvind has already given a solution.
Regards,
Vaibhav

User Event Case getting tied up for long duration in LV 2009 (with SP1)?

Similar Messages

Maybe you are looking for