User exit after save for purchase order create/change
After generating the purchase order no (ME21) i need to save that PO no into a custom table.....can u plz tell me such user exit where i can do this???
Hi,
BADI ME_PROCESS_PO_CUST.
1. Method to implement would be POST.
2. Method POST has parameter IM_HEADER which is in reference to IF_PURCHASE_ORDER_MM.
3. This reference has method GET_CONDITIONS.
4. call this method to get conditions data.
5. Make all the changes based on the logic and use method SET_CONDITIONS to change the values.
User exit will be MM06E005.
EXIT_SAPMM06E_012.
<b>Reward points</b>
Regards
Similar Messages
-
User exit after save for purchase order?
After generating the purchase order no (ME21) i need to save that PO no into a custom table.....can u plz tell me such user exit where i can do this???
Hello,
Use the exit
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
VAsanth -
User exit/ badi needed for planned order create/change,collective ATP check
Dear All,
I'm looking for a user exit/ badi which can be used for planned orders at the stage of
mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
I need after collective availability check to perform the following:
1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
then
2) to start a scheduling.
Very appreciate your help.
Best Regards,
Andrey
Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PMDear,
Use the BAPI : BAPI_PLANNEDORDER_CHANGE
Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
and the transaction MDAC Execute action for planned order
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Please refer this thread,
Re: MDVP for collective orders
Regards,
R.Brahmankar -
User exit or BADI for purchase order
Hi,
I want send outbound IDOC for purchase order to 3rd party integration system.
It is too hard to map between standard purchase order IDOC and business object of 3rd party system because the structure of standard purchase order IDOC is so complicated.
So I want bring purchase order data into CBO table when purchase order is created or released. And this data will be inserted CBO IDOC for more simple structure than standard one.
I'm trying to find some of user exit or BADI to insert from standard purchase order to CBO table in the time of purchase order is created or released.
And I'm trying to find another way using message type.
As far as I know it is possible to set sending IDOC in the purchase order message type setting in IMG.
Is anyone who has related situation or know the way to do this?Hi,
I have similar requirement, however the BADI name you mentioned does not exist.
Pls let me know the right one.
Thanks,
Dipak -
COR2 User Exit at Save for Process Order Manipulation
I am trying to find a User Exit where I can manipulate fields at the item level, specifically batch or CHARG.
PPCO0007 seems to only have the header fields, batch is an item level field. Other exits seem to already save the order prior to my making the change.
Any suggestions will help.
Thank-You.Dear,
User exit ZXVBZU02 assign value to RESB-CHARG first
BAdI WORKORDER_UPDATE, and put break-points in method AT_SAVE, AT_RELEASE, IN_UPDATE
Please refer this thread,
User exit for transaction code COR2
Regards,
R.Brahmankar -
Needs User-Exit/BADI name for Purchase Order in ECC 5.0
MM Experts,
We are using ECC 5.0. We have a requirement to change the value of standard SAP fields on the line item and header of the PO tables after PO is saved in the system.
I will appreciate if someone can guide me about which BADI or User-Exit I have to use to achieve this.
Rewards will be awarded for helpful tips.
Thanks in advance!
MPCharlie,
Thanks for your quick reply. Do you have sample code for this BADI. If yes, then can you please let me know your email address .
Thanks.
MP -
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you -
Hi,
Is there any user-exit at save for transaction KL01.
Here is my requirement.
Where ever am employee is hired in HR ( transaction PA40; Action = Hire) i have to automatically create an Activity Type ( t.code : KL01 ). I am doing this in user-exit PBAS0001, component EXIT_SAPFP50M_002 on HR side.
The next this is, once activity type is created using transaction KL01, i have to automatically trigger a activity type planning, transaction KP26.
So, i need a user exit at Save in transaction KL01, so that i can trigger KP26 from there. I found one exit COOMKS02, but i its not triggeting from KL01.
Does any one know any user-exit in KL01 which trigger at save. Please let me know
Thanks,
PratikHi Sharad,
Thanks for your reply.
I always have an option for executing both KL01 and KP26 fron PBAS0001, but what i was thinking that if there is any exit available at save in KL01, i can trigger KP26 from there.
If i could not find any exit, i will call both KL01 and KP26 from PBAS0001 itself.
Thanks,
Pratik -
User Exit and BADI for Sales Order
Dear Experts,
please give me available user exits and BADI for sales order .i want to take the data from sales order at the time of sales order posting .Hi,
In debugging you can find some Enhancement Spots where you can implement your code. This lets you ignore the need for access key, but its a time consuming process spotting out the exact enhancement point.
Regards
Karthik D -
User Exit IDOC creation - When purchase order gets created
Hi All,
The requirement is whenever user creates a Purchase Order in the current SAP system an IDOC needs to get created and be sent to another SAP system where a Sales Order will be created.
Can anybody suggest the correct User exit/enhancement at the time of Purchase order creation which could be used ?
Also the function modules for creating the IDOCs within the user-exit.
Thanks for your help.Hi Meghna,
Your requirement is SAP standard function which means you don't have to use any user exit.
What you need to do is configure output control, then when a PO saved, a idoc will send to vendor automaticly.
Here is a step brief
1. configure output type in NACE
2. Add condition record in NACE
3. Setup partner profile in WE20
if you need detailed doc, give me your email, I can send you.
Regards,
Brown -
User-exit after updating PO from Order response ?
Hi All,
We are looking for a user-exit after the Purchase order is updated from an order response.
With this user-exit we would like to trigger a WF to the user to carry out transaction YE22N, with the WF the user(PO creator) can execute and update the PO.
Any feedback, tips would be helpfull and for sure points reward.
Thanks & Regards,
NameethHi Anand,
Sorry for the confusion., try to explain here.
During the updation of PO from inbound ORDSP IDoc, we have a transaction YE22N to confirm if the changes in ORDSP is accepted or not.
So we would like to automate this so that after the PO is update/saved from ORDSP IDoc, then we can trigger a workflow to send email to the PO creator.
If its still confusing then, "I would like to know if there is a user-exit or if Workflow can be triggered after updating PO" ?
Regards,
Nameeth -
User exit after saving a sales order
Dear SAP-community,
I am looking for an user-exit that runs after the creation of a sales order. I need the created VBELN of the sales order and want start some additional functionality which should be triggered directly afetr saving?
Does anyone know such a exit?
Thanks
Kind regards
MarkusPlz SEARCH in SCN before posting.
User exit after saving sales order
user exit for saving a sales order -
User exit for Purchase order to change RESB-SOBKZ
Hai,
The requirment is to change the purchase order's RESB-SOBKZ.
The purchase orders will be created in r/3 from APO & the same PO would be published back to APO.
I have to change the above metioned field at the time of PO save in R/3.
The RESB-SOBKZ actually changes the purchase orders Individual & collective indicator based on its value.
Can any one know what is the user exit for this?
I have checked 'EXIT_SAPLCPUR_001' but it dosn't have the RESB related structure.
Thanks,
BhaskarHi,
I know this is very late reply to your query but i think this is the correct answer for which you are looking for.
you were searching in a right direction...just try to see the User Exit EXIT_SAPLMEPI_006 on R/3 side in which you will find the RESB-SOBKZ field in CP_POSITION parameter in Changing Tab,Assoicated Type = MEPI_PO in which SOBKZ field is there on 16th position.
Regards,
Saurabh -
Problem with User exit for Purchase Order creation/change
Hi Everyone,
I have a requirement where I have to implement an enhancement for the standard transaction(ME21N/ME22N). I need to modify a particular field of the item table (EKPO) based on a few comparisons from the header values (After save of PO). I am using the enhancement MM06E005 and its corresponding exit EXIT_SAPMM06E_013. While debugging I notice that the value is getting changed; but as soon as the control comes out of the FM, the change is not being reflected. Hoping to find a solution for this.
Thanks & Regards,
Indudhar P.GHi Guys,
Now I am using the BADI "ME_PROCESS_PO_CUST". But the control is not stopping at the method even though I set a breakpoint. It just saves the PO after I click save. Is this because my document type of PO is Stock Transfer Order. Can I use this BADI for STO's? and moreover how do I process each item line in this method. Does "ls_mepoitem = im_item->get_data( ).
" fetch all the item lines?
Thanks and Regards,
Indudhar P.G -
User exit/BADI to for Purchase requisition through release of Process order
Hi ,
i need to add some text to the Pur Req. The Pur Req will be created through the release of PROCESS order. Please let me know any exits are available for the same.
regardsHi,
check the below enhancements in transaction SMOD.
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
Thanks
Sandeep
Reward if helpful
Maybe you are looking for
-
IN operator is not working correctly while calling,although pl/sql procedur
CREATE or REPLACE PROCEDURE TEST( idListCommaSeparated IN VARCHAR2 AS CURSOR c_emp IS SELECT first_name,last_name,start_date From Employee where id IN(idListCommaSeparated); r_emp c_emp%ROWTYPE; begin insert into temp1 values('B',sysdate,sysdate,'A')
-
Want to know about Oracle Obiee(New to SQL and OBIEE)
Hi I am currently working on software testing.And I would like to change my domain to Oracle obiee.but I have only moderate knowldge on SQL. Is it going to be diffcult to me to learn oracle obiee without pl/sql knowldge? How is the Oracle obiee tool
-
Pointing iweb site to a new domain
Can anyone give me the answer. I have published my site on my .mac account. I then brought a domain from web-mania.com I now want to point my new domain name to the website on my .mac account. I have emailed web-mania with no joy as they keep coming
-
New iPad shows mime attachment
We got a new iPad 4th gen for our office. After setting up its Mail account, I sent an email to the account from my office's Outlook account that has a JPEG attachment. When the email arrived, the image was neither the image or a JPEG icon; instead i
-
Slim[458]: amixer: Unable to find simple control 'PCM',0
Lately I've noticed I've been getting the following my log files. I do have sound but that isn't the issue but the error message comes up constantly in my logs. Does anyone know why this would happen? Jul 14 21:48:31 ziltoid-pc slim[458]: amixer: U