User exit and Customer exit

Hi all
Can any one tell me how to find out whether a transaction contains customer exit or user exit??
If so how to find out the both in a particular transaction??
Thanks and Regards
Arun Joseph

hi,
you can try this one.
REPORT  Z_FIND_USEREXIT NO STANDARD PAGE HEADING.
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

Similar Messages

  • Difference between USER-EXISTs and Customer-Exits???

    Hi,
    Can anyone give me the difference between the user-exits and customer-exits?
    Please respond at the earliest. Thanks in advance.

    Hi,
    USER EXITS->
    1. Introduction:
    User exits (Function module exits) are exits developed by SAP.
    The exit is implementerd as a call to a functionmodule.
    The code for the function module is writeen by the developer.
    You are not writing the code directly in the function module,
    but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    CUSTOMER EXITS-> t-code CMOD.
    As of Release 4.6A SAP provides a new enhancement technique, the Business Add-Ins.
    Among others, this enhancement technique has the advantage of
    being based on a multi-level system landscape (SAP, country versions, IS solutions, partner,
    customer, and so on)
    instead of a two-level landscape (SAP, customer) as with the customer exits.
    You can create definitions and implementations of business add-ins at any level of the system landscape.
    To unify enhancements of the SAP Standard you can migrate customer exits to business add-ins.
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    In order to find out the user exits for any tcode,
    1. get the developement class of the tcode from SE93.
    2. Now goto transaction SMOD and press F4,
    3. give in the Deve class in the dev class and Press ENTER
    this will show u the exits for any tcode.
    or execute this report
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    Regards,
    Lijo Joseph
    *Reward if useful.

  • How to capture user input for customer exit processing?

    I need to calculate the number of working days elapsed in the current fiscal quarter BASED on the USER INPUT on the reporting front.  i.e., say the fiscal quarter started on 1 July 2005 and if the user enters 10 July 2005, I should get the value 8 (Assume that Monday through Friday are all workdays).  If the user enters 12 July 2005, I should get 10.  I have written customer exits and know how to use factory calendar, but <b>THE CHALLENGE</b> is how do I <b>CAPTURE</b> the user input and use it in my exit?  During the varible definition, if I select the check box "Ready for input" then the customer exit is not being processed and unless I check that box I can't get a user entry!  If I look at the import values in the customer exit, I see i_t_var_range with type rrs0_t_var_range.  My strong feeling is that this parameter gets the user input, but I am unable to use it as the customer exit is not being called if I make the user to input the data.  Based on the empirical evidence, I felt that user input and customer exit can not co-exist!!  Please somebody prove me wrong and let me know how can I use the user input to process my "customer-exit" variable.  I would really appreciate any input from the BW community here.

    Hi Sameer,
    Most likely, I'm missing something, but I think that the answer is very simple.
    CASE I_VNAM.
    WHEN 'YOUR_CUSTOMER_EXIT_VAR'.
    IF I_STEP = 2. “ After selecting of input variable
    LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
    WHERE VNAM = 'USER_INPUT_VAR'.
    CLEAR L_S_RANGE.
    L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDLOOP.
    ENDIF.
    ENDCASE.
    In this typical user exit coding you have a user entered value in LOC_VAR_RANGE (originally in I_T_VAR_RANGE) and you construct your user exit variable value in E_T_RANGE.
    Best regards,
    Eugene
    Message was edited by: Eugene Khusainov

  • User exit  vs customer exit

    Hi experts ,
    i am confusing user exit and customer exit plz give good diffrence and where we use these exits
    thanks and advance

    Hi,
    User exit - A user exit is a three character code that instructs the system to access a program during system processing.
    SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
    UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
    Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
    The program for transaction VA01 Create salesorder is SAPMV45A
    If you search for CALL CUSTOMER-FUNCTION i program
    SAPMV45A you will find ( Among other user exits):
    CALL CUSTOMER-FUNCTION '003'
    exporting
    xvbak = vbak
    xvbuk = vbuk
    xkomk = tkomk
    importing
    lvf_subrc = lvf_subrc
    tables
    xvbfa = xvbfa
    xvbap = xvbap
    xvbup = xvbup.
    The exit calls function module EXIT_SAPMV45A_003
    Development
    Creating a Project to include the enhancement
    1. Go to transaction CMOD and create a project.
    2. Enter a description for the project. Then, click on the pushbutton ‘Enhancement Assignments’ in the Application Toolbar.
    3. Enter the name of the enhancement and Save.
    4. Go to ‘Components’.
    Creating Custom Include for ANLU
    The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
    Create the include structure with three new fields, as required. Then, save and activate it.
    Develop the subscreen and the program
    Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
    Create it as subscreen.
    Then, go to the Layout of the screen and create three new fields from Database table ANLU.
    Drag the fields in the screen body and place them.
    Then, save and activate the screen and come back to screen flow editor.
    Create the PAI module to add validation for field “Location 2”, as required .
    Activate the whole function group and come out.
    Write code in the Function Exits to synchronize the programs
    Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
    Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
    Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
    Then, activate everything – the whole project and come out.
    Complete the configuration to link the subscreen
    The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
    Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
    Here, the requirement is to create these three custom fields in the tab page ‘General’ of asset master screen ( AS01/AS02/AS03/AS91).
    Determine the Layout
    To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class ‘1000’ and click on folder ‘General Assignment of Layout’.
    Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout ‘SAP’ cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
    Create new tab layout
    Go to transaction AOLA. Copy the tab layout ‘SAP’ to create another layout, say, YSUB.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder ‘Tab page titles’.
    You want to put your custom fields in the tab page “General”. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page “General” are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with “U” padded with the custom subscreen prepared by you.
    Then, save and come out.
    Assign the new Layout to Asset Class
    Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
    Save and come out.
    Test the Exit
    Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them…save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
    Please check these links for more information.
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    Customer exit and User Exit
    User Exit Vs Customer Exit
    Regards,
    Priyanka.

  • How to find out the customer exit and sap exit variables created provider?

    Hi all,
    How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
    thanxs
    haritha

    Hello haritha,
           SAP Exit and Customer Exit variables are created for  Characteristics and not for individual InfoProviders.
    So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
    So the same Exit can be in one or more InfoProviders.
    Hope it helps.
    Thanks,
    Chandran

  • Menu Exits and Screen Exits

    hi everyone,
    can you send me some examples on menu exits and screen exits.
    thank you.
    preetham

    Hi Preetham,
    In older versions MENU Exits approached through Transaction CMOD by creating
    PROJECTS and activating the project and assigning Program to that
    Transaction Codes. For MENU Exits, Transaction Codes will be starting with
    "+" sign and with default text "NODE TEXT NOT FOUND" for which you can
    assign your Report or Dialog Program etc., (for Eg:- +DW4 MENU Exits
    Transaction available in TOOLS --> ABAP Workbench --> Utilities --> <Node
    Text Not found>).
    Procedure for Creating MENU Exits.
    1) To get into Area Menu Maintenance Screen Type SE43 T.Code in Command
    Line.
    2) In Area Menu Paramenter type 'S000' (S triple Zero)
    3) Then Press Change Icon in Application Tool Bar. Then It may ask for
    Access Key [or] it may display "Specify Processing mode" window. If it ask
    for the Access Key Check for the availability of OSS Note and apply to open
    Standard SAP Menu to include MENU Exits. Otherwise, if it display "Specify
    Processing mode" window with Three Push Button. In which select "Change" and
    proceed further.
    4) Then it will display "Information" window with the following information
    "Caution : The Original Language of the structure is German (editing lang. :
    English) ". Then press "Enter Key to proceed further.
    5) Then you will get into "Edit Area Menu S000".
    6) for eg:- Expand Tools Menu.
    7) Then Press ABAP Workbench <Icon>.
    8) Then you will get into ABAP Workbench Menu Tree.
    9) Then Expand Utilities Menu.
    10) In the last line you will find one MENU EXIT Provision to include your
    own menu. "Node Text Not Found" This text can be change by double Clicking
    that. There you can find the T.Code. Here for Eg:- "+DW4".
    11) for eg: - Here change the Text to "Sample Menu Exit" and then note down
    the T.Code "+DW4".
    12) Then Save with Change Request Number and come out of Transaction SE43.
    13) Then Goto Transaction SE93.
    14) Then type T.Code "+DW4" and press Create.
    15) Then proceed further to create transaction called "+DW4".
    I hope this could help you in Creating Menu Exit...
    Creating menu exits
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
    For screen exits.
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screen’s flow logic.
    the tcode is cmod...
    1.From the main screen of the Project management transaction, proceed as follows:
    Select Enhancement components and choose Change.
    2.Choose Edit component.
    3.Choose the screen exit and double click on it
    4.Create your subscreen using the Screen Painter.
    5.Design your screen to be added to the standard screen and activate the particular screen and return back to the flow logic .
    6.Choose the PAI and PBO to write down the logic.
    7.Generate your screen and choose Back (the green arrow) to return to the Project management transaction.
    8.Go to the transaction ME22 to view the customer defined screen exit.
    9.Enter the purchase order number and press Enter.
    10.Go to the menu header --> Details.
    11.Purchase number is visible on the standard screen
    check the foll link,
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    Menu exits allow you to add your own functions to the pulldown menus in standard R/3 transactions. To take advantage of a menu exit, you first need to create a project as described in the section Creating an add-on project. Then, you must include the SAP enhancement package that contains the menu exit you want to use in your project. From the main screen of the Project management transaction, proceed as follows:
    Select Enhancement components and choose Change.
    The system lists all customer exits contained in the enhancements included in your project.
    Place the cursor on the menu exit you want to add your own function to.
    Choose Edit component.
    The system displays technical information about the menu entry. It also displays two input fields where you can specify a language and the text you want your menu item to have.
    Enter the name of your menu function (such as Special order method) in the field New text.
    Choose Save text.
    Your special menu function will not appear in the pulldown menu of the corresponding standard transaction until you activate your enhancement project.
    Specifying a menu text and activating your project are not the only steps you need to take to make your own menu item work. After you carry out these steps, your menu item will appear, but it will not call a corresponding function. To attach your menu entry to its corresponding function, you need to create a function module for the function module exit associated with your menu text. This function module exit is part of the same SAP enhancement that contains the menu exit you used. Creating Customer-Specific Function Modules tells you more about how to use function module exits.
    also refer
    MEnu Exit
    http://www.sap-img.com/abap/what-is-user-exits.htm
    Creating menu exits
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
    For screen exits.
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    chech these links for user exists its usefull
    http://www.allsaplinks.com/user_exit.html
    Re: Screen exit
    user exit and customer exit
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/561602545a11d1a7020000e829fd11/frameset.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    How to implement screen exit for a SAP standard transaction
    Introduction
    SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
    To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
    To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
    An append structure in the database table with the new fields.
    A subscreen area into the standard screen – where the programmer can attach his subscreen of his own program with the new fields.
    A function group under which the new subscreen has to be created with the new fields.
    Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen – so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
    Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
    Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
    Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
    Pre-Requisites
    The developer to work on screen exit should have essential knowledge on the following:
    DDIC concepts, including the knowledge of append structure.
    Concept of SAP Enhancements and implementing them using Projects.
    Concept of function exits.
    Knowledge on Module Pool – including subscreens, Tabstrip controls etc.
    Steps
    Guidelines
    So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
    Find out the Required Enhancements
    Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton ‘SAP Applications’. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest – for e.g., Purchasing, Asset Accounting, etc.
    Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
    Utilize the Enhancement in a Project
    After you have found one, do as directed in the documentation. Generally, the steps are as follows:
    Create a project using CMOD including your enhancement.
    Create the append structure with new fields.
    Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
    Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
    Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
    Activate the project.
    Test to ensure that required functionality are met.
    Case Study 1
    Add three new custom fields for Asset master and maintain information for them
    Requirement
    Three fields in the legacy system have to be maintained in Asset master. These fields are:
    Original Asset number – 20 characters
    Location 2 – 15 Characters.
    Model no – 20 characters
    Location 2 should start with ‘L’.
    Pre-Analysis
    Finding out the Enhancement
    As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
    Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
    Studying the Function Exits
    The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
    EXIT_SAPLAIST_002
    Function module Level Documentation
    This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
    Import Parameters
    Understanding
    This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
    EXIT_SAPLAIST_003
    Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
    Understanding
    This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
    Studying the Documentation of the Enhancement
    The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
    Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
    Deciding the Final course of Action
    After making all the investigations, the final course of action was determined.
    SrlNo Step Justification
    A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
    Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
    A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be ‘CUST’ (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
    In the PAI of the subscreen, validation for Location to start with ‘L’ will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_002’, the following code will be written:-
    ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_003’, the following code will be written:-
    E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
    Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done – otherwise, the new custom subscreen will not be displayed in the Asset master screens.
    Development
    Creating a Project to include the enhancement
    Go to transaction CMOD and create a project.
    Enter a description for the project. Then, click on the pushbutton ‘Enhancement Assignments’ in the Application Toolbar.
    Enter the name of the enhancement and Save.
    Go to ‘Components’.
    Creating Custom Include for ANLU
    The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
    Create the include structure with three new fields, as required. Then, save and activate it.
    Develop the subscreen and the program
    Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
    Create it as subscreen.
    Then, go to the Layout of the screen and create three new fields from Database table ANLU.
    Drag the fields in the screen body and place them.
    Then, save and activate the screen and come back to screen flow editor.
    Create the PAI module to add validation for field “Location 2”, as required .
    Activate the whole function group and come out.
    Write code in the Function Exits to synchronize the programs
    Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
    Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
    Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
    Then, activate everything – the whole project and come out.
    Complete the configuration to link the subscreen
    The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
    Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
    Here, the requirement is to create these three custom fields in the tab page ‘General’ of asset master screen ( AS01/AS02/AS03/AS91).
    Determine the Layout
    To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class ‘1000’ and click on folder ‘General Assignment of Layout’.
    Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout ‘SAP’ cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
    Create new tab layout
    Go to transaction AOLA. Copy the tab layout ‘SAP’ to create another layout, say, YSUB.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder ‘Tab page titles’.
    You want to put your custom fields in the tab page “General”. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page “General” are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with “U” padded with the custom subscreen prepared by you.
    Then, save and come out.
    Assign the new Layout to Asset Class
    Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
    Save and come out.
    Test the Exit
    Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them…save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
    Original Source: ittoolbox.com
    MENU
    refer
    MEnu Exit
    just refer to the link below for step by step procedure with screen shots
    http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
    Menu exits allow you to add your own functions to the pulldown menus in standard R/3 transactions. To take advantage of a menu exit, you first need to create a project as described in the section Creating an add-on project. Then, you must include the SAP enhancement package that contains the menu exit you want to use in your project. From the main screen of the Project management transaction, proceed as follows:
    Select Enhancement components and choose Change.
    The system lists all customer exits contained in the enhancements included in your project.
    Place the cursor on the menu exit you want to add your own function to.
    Choose Edit component.
    The system displays technical information about the menu entry. It also displays two input fields where you can specify a language and the text you want your menu item to have.
    Enter the name of your menu function (such as Special order method) in the field New text.
    Choose Save text.
    Your special menu function will not appear in the pulldown menu of the corresponding standard transaction until you activate your enhancement project.
    Specifying a menu text and activating your project are not the only steps you need to take to make your own menu item work. After you carry out these steps, your menu item will appear, but it will not call a corresponding function. To attach your menu entry to its corresponding function, you need to create a function module for the function module exit associated with your menu text. This function module exit is part of the same SAP enhancement that contains the menu exit you used. Creating Customer-Specific Function Modules tells you more about how to use function module exits.
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    Suppose you need to find out all the user exits related to a tcode.
    1. Execute the Tcode.
    2. Open the SAP program.
    3. Get the Development Class.
    4. Execute Tcode SE84.
    5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
    6. Enter the Development class and execute.
    Check out this thread..
    The specified item was not found.
    1. Type the transaction : system->status-> <PROG. NAME>
    2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
    3. Open CMOD utilities->SAP enhancements
    EDIT->All selections
    4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
    5. The displayed list contains the enhancements names for the transaction You were looking for.
    6. Create a project in CMOD and the code in default include->activate.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    User-Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm
    Reward points if helpful.
    Thanks
    Naveen khan
    Message was edited by:
            Pattan Naveen

  • Screen exit and menu exit

    want some examples and step by step guide for menu exits and screen exits.

    Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screen’s flow logic.
    the tcode is cmod...
    1.From the main screen of the Project management transaction, proceed as follows:
    Select Enhancement components and choose Change.
    2.Choose Edit component.
    3.Choose the screen exit and double click on it
    4.Create your subscreen using the Screen Painter.
    5.Design your screen to be added to the standard screen and activate the particular screen and return back to the flow logic .
    6.Choose the PAI and PBO to write down the logic.
    7.Generate your screen and choose Back (the green arrow) to return to the Project management transaction.
    8.Go to the transaction ME22 to view the customer defined screen exit.
    9.Enter the purchase order number and press Enter.
    10.Go to the menu header --> Details.
    11.Purchase number is visible on the standard screen
    check the foll link,
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    Menu exits allow you to add your own functions to the pulldown menus in standard R/3 transactions. To take advantage of a menu exit, you first need to create a project as described in the section Creating an add-on project. Then, you must include the SAP enhancement package that contains the menu exit you want to use in your project. From the main screen of the Project management transaction, proceed as follows:
    Select Enhancement components and choose Change.
    The system lists all customer exits contained in the enhancements included in your project.
    Place the cursor on the menu exit you want to add your own function to.
    Choose Edit component.
    The system displays technical information about the menu entry. It also displays two input fields where you can specify a language and the text you want your menu item to have.
    Enter the name of your menu function (such as Special order method) in the field New text.
    Choose Save text.
    Your special menu function will not appear in the pulldown menu of the corresponding standard transaction until you activate your enhancement project.
    Specifying a menu text and activating your project are not the only steps you need to take to make your own menu item work. After you carry out these steps, your menu item will appear, but it will not call a corresponding function. To attach your menu entry to its corresponding function, you need to create a function module for the function module exit associated with your menu text. This function module exit is part of the same SAP enhancement that contains the menu exit you used. Creating Customer-Specific Function Modules tells you more about how to use function module exits.
    also refer
    MEnu Exit
    http://www.sap-img.com/abap/what-is-user-exits.htm
    Creating menu exits
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
    For screen exits.
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    chech these links for user exists its usefull
    http://www.allsaplinks.com/user_exit.html
    Re: Screen exit
    user exit and customer exit
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/561602545a11d1a7020000e829fd11/frameset.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    How to implement screen exit for a SAP standard transaction
    Introduction
    SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
    To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
    To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
    An append structure in the database table with the new fields.
    A subscreen area into the standard screen – where the programmer can attach his subscreen of his own program with the new fields.
    A function group under which the new subscreen has to be created with the new fields.
    Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen – so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
    Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
    Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
    Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
    Pre-Requisites
    The developer to work on screen exit should have essential knowledge on the following:
    DDIC concepts, including the knowledge of append structure.
    Concept of SAP Enhancements and implementing them using Projects.
    Concept of function exits.
    Knowledge on Module Pool – including subscreens, Tabstrip controls etc.
    Steps
    Guidelines
    So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
    Find out the Required Enhancements
    Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton ‘SAP Applications’. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest – for e.g., Purchasing, Asset Accounting, etc.
    Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
    Utilize the Enhancement in a Project
    After you have found one, do as directed in the documentation. Generally, the steps are as follows:
    Create a project using CMOD including your enhancement.
    Create the append structure with new fields.
    Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
    Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
    Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
    Activate the project.
    Test to ensure that required functionality are met.
    Case Study 1
    Add three new custom fields for Asset master and maintain information for them
    Requirement
    Three fields in the legacy system have to be maintained in Asset master. These fields are:
    Original Asset number – 20 characters
    Location 2 – 15 Characters.
    Model no – 20 characters
    Location 2 should start with ‘L’.
    Pre-Analysis
    Finding out the Enhancement
    As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
    Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
    Studying the Function Exits
    The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
    EXIT_SAPLAIST_002
    Function module Level Documentation
    This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
    Import Parameters
    Understanding
    This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
    EXIT_SAPLAIST_003
    Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
    Understanding
    This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
    Studying the Documentation of the Enhancement
    The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
    Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
    Deciding the Final course of Action
    After making all the investigations, the final course of action was determined.
    SrlNo Step Justification
    A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
    Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
    A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be ‘CUST’ (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
    In the PAI of the subscreen, validation for Location to start with ‘L’ will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_002’, the following code will be written:-
    ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_003’, the following code will be written:-
    E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
    Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done – otherwise, the new custom subscreen will not be displayed in the Asset master screens.
    Development
    Creating a Project to include the enhancement
    Go to transaction CMOD and create a project.
    Enter a description for the project. Then, click on the pushbutton ‘Enhancement Assignments’ in the Application Toolbar.
    Enter the name of the enhancement and Save.
    Go to ‘Components’.
    Creating Custom Include for ANLU
    The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
    Create the include structure with three new fields, as required. Then, save and activate it.
    Develop the subscreen and the program
    Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
    Create it as subscreen.
    Then, go to the Layout of the screen and create three new fields from Database table ANLU.
    Drag the fields in the screen body and place them.
    Then, save and activate the screen and come back to screen flow editor.
    Create the PAI module to add validation for field “Location 2”, as required .
    Activate the whole function group and come out.
    Write code in the Function Exits to synchronize the programs
    Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
    Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
    Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
    Then, activate everything – the whole project and come out.
    Complete the configuration to link the subscreen
    The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
    Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
    Here, the requirement is to create these three custom fields in the tab page ‘General’ of asset master screen ( AS01/AS02/AS03/AS91).
    Determine the Layout
    To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class ‘1000’ and click on folder ‘General Assignment of Layout’.
    Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout ‘SAP’ cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
    Create new tab layout
    Go to transaction AOLA. Copy the tab layout ‘SAP’ to create another layout, say, YSUB.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder ‘Tab page titles’.
    You want to put your custom fields in the tab page “General”. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page “General” are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with “U” padded with the custom subscreen prepared by you.
    Then, save and come out.
    Assign the new Layout to Asset Class
    Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
    Save and come out.
    Test the Exit
    Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them…save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
    Original Source: ittoolbox.com
    MENU
    refer
    MEnu Exit
    just refer to the link below for step by step procedure with screen shots
    http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
    Menu exits allow you to add your own functions to the pulldown menus in standard R/3 transactions. To take advantage of a menu exit, you first need to create a project as described in the section Creating an add-on project. Then, you must include the SAP enhancement package that contains the menu exit you want to use in your project. From the main screen of the Project management transaction, proceed as follows:
    Select Enhancement components and choose Change.
    The system lists all customer exits contained in the enhancements included in your project.
    Place the cursor on the menu exit you want to add your own function to.
    Choose Edit component.
    The system displays technical information about the menu entry. It also displays two input fields where you can specify a language and the text you want your menu item to have.
    Enter the name of your menu function (such as Special order method) in the field New text.
    Choose Save text.
    Your special menu function will not appear in the pulldown menu of the corresponding standard transaction until you activate your enhancement project.
    Specifying a menu text and activating your project are not the only steps you need to take to make your own menu item work. After you carry out these steps, your menu item will appear, but it will not call a corresponding function. To attach your menu entry to its corresponding function, you need to create a function module for the function module exit associated with your menu text. This function module exit is part of the same SAP enhancement that contains the menu exit you used. Creating Customer-Specific Function Modules tells you more about how to use function module exits.
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    Suppose you need to find out all the user exits related to a tcode.
    1. Execute the Tcode.
    2. Open the SAP program.
    3. Get the Development Class.
    4. Execute Tcode SE84.
    5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
    6. Enter the Development class and execute.
    Check out this thread..
    The specified item was not found.
    1. Type the transaction : system->status-> <PROG. NAME>
    2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
    3. Open CMOD utilities->SAP enhancements
    EDIT->All selections
    4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
    5. The displayed list contains the enhancements names for the transaction You were looking for.
    6. Create a project in CMOD and the code in default include->activate.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    User-Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm
    Reward points for useful Answers

  • USER EXITS Vs CUSTOMER EXITS

    Hi all,
    can any one clearly explain me the diff between user exits & customer exits.....
    points will b rewarded .....
    Thank You.
    Regards,
    Prashanth.

    Hi Prashanth Polsani  ,
    Difference between user exits & customer exits:
    User exit - A user exit is a three character code that instructs the system to access a program during system processing.
    SXX: S is for standard exits that are delivered by SAP.   XX represents the 2-digit exit number.
    UXX: U is for user exits that are defined by the user.  XX represents the 2-digit exit number
    Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.    
    The following document is about exits in SAP :-
    The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. 
    SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
    Types of Exits 
    There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
    Menu Exits
    Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
    SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu item’s text when activating the item in an add-on project.
    Screen Exits
    Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screen’s flow logic.
    Function Module Exits 
    Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits. 
    When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated. 
    Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs. 
    These calls have the following syntax: 
    CALL CUSTOMER-FUNCTION ‘001’.
    Field Exits
    Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field.  Example: The data element BBBNR identifies a company’s international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100. 
    The field exit concept lets you create a special function module that contains this logic. 
    You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number. 
    In 4.6c, you can use "RSMODPRF" program to create field exits.
    An example of a user exits :-
    MODULE user_exit_0001 INPUT 
        CASE okcode.
            WHEN 'BACK OR EXIT'.
                CASE sy-dynnr.
                        WHEN '100'.
                             SET SCREEN 0.
                             LEAVE SCREEN.
                        WHEN '200'.
    Note that you can write any code that satisfy your needs.                                                     ****
    But in this case, this was wrote as a sample code for reference sake.                                    ****
    And you can test it.                                                                                ****
                             SET SCREEN 100.
                             LEAVE SCREEN.
                 ENDCASE.
          ENDCASE. 
    As with customer exits two different views are available:
    In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object. 
    In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
    USER-EXITS can be used only one time.
           Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
    These r the following web-sites which may find helpful to u :
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    http://www.easymarketplace.de/userexit.php
    *****Pls reward points if u find this useful
    cheers,
    gyanaraj

  • User Exit and screen Exit

    hi everyone,
             For custom field creation and linking the existing system fields with my custom fields i like to know about User Exit and screen Exit. Kindly give me the suggestion.
    Thanks  & Regards
    R.Vijai

    hi,
    this will help you find screen exit for a tcode.
    [https://forums.sdn.sap.com/click.jspa?searchID=19171273&messageID=6151259]

  • Doubts in abap user exit and coustomer exit

    Hi every bady,
    Any one knows the different between user exit and coustomer exit please answer my question
    with regards,
    Sentha

    Hi,
    Difference between user exits & customer exits:
    User exit - A user exit is a three character code that instructs the system to access a program during system processing.
    SXX: S is for standard exits that are delivered by SAP.   XX represents the 2-digit exit number.
    UXX: U is for user exits that are defined by the user.  XX represents the 2-digit exit number
    Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
    The following links are also useful:
    User Exit Vs Customer Exit
    coding in user exit in program rffous_t
    User exits
    User Exits
    Refer this link
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
    Check the following links.
    For customer exits
    http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1975d943b111d1896f0000e8322d00/frameset.htm
    Difference b/w BADI and user exits
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    User Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    Regards,
    Rakesh

  • Diff between userexit and customer exits

    hi friends,
                 what is the diff b/w userexit and customer exits.
    thanks in Advance.

    Hai,
    Here is the clear differentiation:
    User exit - A user exit is a three character code that instructs the system to access a program during system processing.
    SXX: S is for standard exits that are delivered by SAP.   XX represents the 2-digit exit number.
    UXX: U is for user exits that are defined by the user.  XX represents the 2-digit exit number
    Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.    
    User Exits : -
    1. User exits are routines which SAP allows you to add in additional
    customized programs process without affecting the standard SAP programs. SAP
    user exits are usually declared as a form routine :-
    form userexit_xxxxx
    endform.
    2. No need to create project in CMOD/SMOD.
    3. Won't be automatically transported during version upgrade.
    Customer Exits :-
    1. Could be either Function Exits or Menu Exits.  SAP will provide certain
    FMs which will be called during the execution of SAP transactions.
    2.Generally require the developer to create a project in CMOD/SMOD.
    3. Will be automatically transported during version upgrade.
    Types of Exits 
    There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
    Menu Exits
    Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
    SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu item’s text when activating the item in an add-on project.
    Screen Exits
    Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screen’s flow logic.
    Function Module Exits 
    Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits. 
    When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated. 
    Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs. 
    These calls have the following syntax: 
    CALL CUSTOMER-FUNCTION ‘001’.
    Field Exits
    Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field.  Example: The data element BBBNR identifies a company’s international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100. 
    The field exit concept lets you create a special function module that contains this logic. 
    You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number. 
    In 4.6c, you can use "RSMODPRF" program to create field exits.
    An example of a user exits :-
    MODULE user_exit_0001 INPUT 
        CASE okcode.
            WHEN 'BACK OR EXIT'.
                CASE sy-dynnr.
                        WHEN '100'.
                             SET SCREEN 0.
                             LEAVE SCREEN.
                        WHEN '200'.
    Note that you can write any code that satisfy your needs.                                                     ****
    But in this case, this was wrote as a sample code for reference sake.                                    ****
    And you can test it.                                                                                ****
                             SET SCREEN 100.
                             LEAVE SCREEN.
                 ENDCASE.
          ENDCASE.
    Hope u got the difference now.
    Reward points if it helps you.
    Regds,
    Rama.Pammi

  • User-exit or Customer Exit while save of Invoice (VF01)

    Hi,
    I want ot sand mail on the time of click on save button of VF01.
    Can any one tell user-exit or Customer exit which hit while save of invoice.
    Regards
    Durgesh Kumar

    Hello,
    You can use RV60AFZZ. Please check sy-tcode = 'VF01' on this user-exit.
    Regards,
    Burak

  • How to findout Field Exit and Menu Exit  ?

    Hi all,
    How to findout Field Exit and Menu Exit  ?If you have any example for both , could you please send it to me ?
    Thanks in advance
    Krishnasri

    To find user exit  check below code exicute with required T code you will get its all exits
    report  zm_user_exit1 no standard page heading.
    *& Enter the transaction code that you want to search through in order
    *& to find which Standard SAP User Exits exists.
    *& Tables
    tables : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    *& Variables
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    *& Selection Screen Parameters
    selection-screen begin of block a01 with frame title text-001.
    selection-screen skip.
    parameters : p_tcode like tstc-tcode obligatory.
    selection-screen skip.
    selection-screen end of block a01.
    *& Start of main program
    start-of-selection.
    Validate Transaction Code
    select single * from tstc
    where tcode eq p_tcode.
    Find Repository Objects for transaction code
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    Find SAP Modifactions
    select * from tadir
    into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Take the user to SMOD for the Exit that was selected.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    Rewards if useful......................
    Minal

  • Which category screen exits and function exit come

    Hi ,
    I have created an enhancement in ECC 6.0 system on screen exit and function exit for LM00 tcode. now i want to update my developed object in Solution manager.
    Anyone pls help me under which category this enhancement project falls.

    Thanks everyone for the prompt response.
    The scenario is thet I have 190 CMOD projects and I needa quick way to find out which of the function exits in the CMOD projects have been implemented and which are the Z includes in these implemented function exits.
    Doing it one-by-one would take too much time. TADIR does not give the function exits and the includes in them.
    Need a quick way of identifying the implemented function exits, and the includes in the function exits, from the CMOD project name.
    Peter

  • How the MENU EXITS and SCREEN EXITS are incorporated in FRAME WORK ?

    Hi All ,
    I read the sevaral docs that gives the basic understanding of the frame Work technology .But no where I could find the Concept Of Screen exits and menu exits in Frame work . Could you please give some idea on that ? Appreciate if you can give any documentation links .
    Thanks in advance ,
    Dharma .

    Hi All ,
    I read the sevaral docs that gives the basic understanding of the frame Work technology .But no where I could find the Concept Of Screen exits and menu exits in Frame work . Could you please give some idea on that ? Appreciate if you can give any documentation links .
    Thanks in advance ,
    Dharma .

Maybe you are looking for

  • I tried to change format of saved bookmarks didn't work how can i fix it?

    I used the right click properties and add the file extension to change it to html, didn't know json was the right format. when i use firefox tp open all i see is alot of text

  • According to nokia maps , half my city is on water

    i'm using a 6110 navigator with the latest nokia maps for navigation around Alexandria, Egypt. according to nokia maps a great part of the city, although showing streets and names is on water. in other words the map design shows blue water underneath

  • How do import/export studio project to myeclipse?

    Hello guys, Is there a way to do this??? Thanks!

  • Debug JVM with gdb

    I would like to step through the JVM native code with GDB. Currently this only works by first starting the JVM and then attaching gdb to the java process. This makes it impossible to look at the bytecode parsing code. If I start the a JVM (jdk 6u18)

  • Audigy 2 Grqphic Equilizer Not Work

    I have windows vista 32-bit and I have downloaded and installed updates but my graphic equalizer isn't working. Click on graphic equalizer from menu and it doesn't load. Any suggestions?