User exit asking for access key in CMOD

Hi Experts,
I am trying to write source code for an user exit in CMOD by creating a project and assigning enhancement to it.
When i click on user exit and press change it asks for access key .
Can you please tell me if there is any other way to write source code inside it ?

Hi Martina,
Kindly go through this link below ,there few steps present to work on user exits:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Hope it helps
Regrds
Mansi

Similar Messages

Userexit asking for access key in CMOD

Hi Experts,
I am trying to write source code for an user exit in CMOD by creating a project and assigning enhancement to it.
When i click on user exit and press change it asks for access key .
Can you please tell me if there is any other way to write source code inside it ?

Hi
1) Create the project
2) add the enhancments
3) Double click on the EXIT_**********
4) Place the cursor at the include double click and hit the enter so that you will get a pop up asking to create that include
5) write the code & activate it
6) back to enhancemnt screen and activate .
You should not enter in into the exit in change mode, enter into the exit(f.m) in display mode and then Place the cursor at the include double click and hit the enter so that you will get a pop up asking to create that include so that you can write the code in that include and activate.
Thaks & Regards
Mallik

Problem in writing a code MENU EXIT.. it is asking for access key.

Hi,
I have a problem in creating a menu exit.
while am creating a menu exit i went to CUS to write code but it is asking for Access Key..
could anybody help me regarding this..??
Thank you,
Praveen Dubasi.

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

Doesnot ask for access key. error No authorization for the 'S_DEVELOP'

Hi,
After applying patches,in transaction F-43 one of the field Inv Recd Date( BSEG-ZOLLD) is not getting displayed.
after analzing we found that ZOLLD is not there in screen SAPMF05A(0302).
in my development server when i try to change the screen it says "You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned"
my profiles contains sap_all and sap_new rights even then I am getting this error.
Why doesnt it ask for access key ?
Kindly guide me .
Regard

> Please check in Su24, if iy has S_develop object or not,
In SU24? why? and what or who is "iy"?
> since you say you have SAP_ALL access please regenerate SAP_ALL its a composite profile this should work fine.
What does the fact that it is a composite profile matter? Besides that I've already made a remark about regenerating it.
> But you need to check at SU24 against f-43 whether S_develop missing or not,if missing please insert manually
Ehm, do you really think the SU24 settings for a transaction influence the changeability of it's underlying screens/programs etc? It will not matter at all what you do with S_DEVELOP in SU24.

Sap netweaver 7.0 abab trial version asking for access key...???

Hi all,
I have just installed minisap and I am trying to create my first program but I get ask for an access key that I don´t know where to find.
Does anybody have any idea of what this is and where can I get it?
thanks in advance.
CRV

Hi CRV,
Access key is an obligatory key for ABAP developer. Only after filling it in, you can create and modify your programs in abap editor. You can search and download the access key generator on internet. There are a lot of websites provide this.
Regards
Rake

Asking for Access Key & register in OSS

Hi All,
Can anybody tell me that, while i am tring to create Generic datasource for Transaction data in BI 7, it is asking me <b>Access Key</b> and Register in <b>OSS</b>
What would be the reason for this...
Regards,
Kiran Telkar

The reason is you are developing new content within the SAP system, it requires an Access Key, you need to request this from your Basis team and you enter the code into Object you want to create and you will gain access and be able to create.

User exit IPRM0002 for preventive maintenance

user exit IPRM0002 for preventive maintenance
has anyone used this user exit? or BADI: BAdI: IPRM_MCP_SCHE_CHANGE ?
I seem to have some difficulty in knowing how to use these....
I need to basically be able to influence a calling date for next PMorder to be opened but documentation is not explanatory and, even if I do know what these exit/badi are used for, i do not understand how to use the parameters provided.
can anyone help?

Hi,
I dont think you would be able to test the exit if you dont implement them for the user exits simply passing the parameters wont help,actually there is a process of implementing a USER-EXIT i suppose u would already be familiar to it, I order to activate the exit you have to create a project in CMOD transaction and assign the enhancement to that and then also create the include that is avaliable inside the FM and there you would be able to put your code.
For the BAPIs ,yes the control should go inside the BADI once you put a breakd point inside the right method but there to you need to implement the BADI and then you can put your code in the method for the effects to take place and you can test.
The detail process of implementation are already avaliable on SCN, It seems that you dont have developer authorizations so i would suggest to take help from some one who has, Best of Luck:).
Regards,
Himanshu

User exit/BADI for Deleting the Empty Handling unit

Hi All,
Can anyone give me the suitable User exit/BADI for the below scenario.
While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
Thanks in advance.
Thanks
Ramesh.

Find below couple of User Exits for Transfer Order.
MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
The Exits gives you access to LTAK and LTAP.....
Hope this is helpful to you.
Vinodh Balakrishnan

MEREQ001 User Exit Problem for ALV Columns.

Hello,
I am using this user exit to make changes to the Purchase requisition enjoy transaction. There is an ALV used for item details and if you use the customer CI_EBANDB include in EBAN table you can see those fields available in the alv and you can add them up using change layout.
To make these fields editable as they remain in display always inspite of the fact that you use ME51n or ME52n.
MM --> Purchasing --> Purchase Req -->Define Scree Layout at document level.
is the configuration required as per a previous mail thread in the forum. However when i go to spro i am not able to see those new fields which i have added for KEY FIELD selection. Am i missing something or has anybody before done this... Could anybody guide me with the step by step process.
Regards,
Shekhar Kulkarni

Hello,
In 46C, I checked and found no user exits / BADIs for your requirement. If you are very keen of this feature, may be that you have to modify the SAP standard. Not a good option.
Regards, Murugesh AS

User Exit MIGO for Purchase Orders

I need to check a purchase order during the Migo process.
I tried the User Exit EXIT_SAPLEINR_001, but the break-point has no effect. The user- exit is useful for schedule agrmts but it seems that there is a different handling.
Do you have an idea where I can check the MIGO date?

hi alexander,
this program will display all the user exits available for any specified Tcode.
when u execute this code...... it will ask for tcode..... u enter any tcode.... it will display all available exits for specified tcode.....
i hope this may help u...... all the best....
report y_user_exit .
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
reward me if it is useful..............
with regards.....

After Effects keeps asking for a key

Every time I launch AE CS6 (I'm a CC member) it keeps asking for a key. This is when I select License This Software. It recognises my Adobe ID but not my subscription. I did load a trial version of AECS6 in February is this the problem?
Prem pro fails to load with error0XC000007b... and AI says up to date but cant find a launch icon. Cant even find the downloaded files. I have spent the whole day on the Creative Cloud trying to get it to work. I have early versions of some of these programs installed is this the problem? I'm at my wits end as I have client projects that need attending to.

Thank you Vikrant, Firstly the screen shown in your below link which included a video is different to the screen the I get. It is a simple screen that asks Buy this software or license this software. Click License... and it wants a key. 2, I have been a member for 24 hours. 3. I use only one adobe ID. The issue did not happen with Audition CS6.I I deleted all adobe CS6 files using the CC Cleaner. Also deleted the hidden file (OPM.db file). I subsequently D/L AE from the Cloud. It D/L'd, Extracted then Failed to boot. I checked its error report and it was ... WTF?
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 0 error(s)

Apps always asking for access (N8)

I recently had to factory reset my N8 to get rid of the phone lock bug caused by me inadvertently enabling MfE (the one where you can't turn off lock code even though MfE has been disabled).
But after restoring everything, I'm getting very annoying behaviour from some apps and widgets. For example AccuWeather will ask for access to phone data and for user data as well as the usual "Allow connection to network" prompt. Also Maps will ask to select an access point but fails to remember it even in the same session so will ask again 10 minutes later.
Some things are ok, like the email widgets that update without problem.
I read somewhere that it might be to do with certificates and signing but I haven't a clue how to resolve it. I've tried uninstalling and re-installing AccuWeather and have installed an updated version of Maps since the problem started but there's been no change in behaviour.
Any ideas?

The Maps problem might be an access point issue but the AccuWeather is something else because it's asking for permission to access user data and also to access phone data which I know are related to security capabilities which would have been set when the apps were signed.
It's not only AccuWeather that has this problem, I get it with some other apps too (e.g. AutoTrader) but not all. It might be to do with the type of technology the app was developed with (i.e. Qt, QML, WebKit etc), but you can't tell so easily.

Why FPSEC1 is asking for recon key

As we post security deposit as statstical document than why FPSEC1 is asking for recon key .
Appreciate your help in this
Kind regards,
Vinod Khelani

Hi Vinod,
The answer to your question lies in the event 1113 where the sample FM FKK_SAMPLE_1113_USER is configured.
This event gets triggerred when you create a FI-CA document.
The FM works in such a way it selects the origin key for the particular process from TFK001C (in this case Security Deposit with orgin key -13) and then looks whether the Username is assocaited with a reconcliation group or not in TFK001U.
If the conditons do not get satisfied, it raises an error message....
So you need to maintain the reconciliation grp against your user ID in table TFK001U.
Please refer to the SAP note 442560 for the same.
Morever, you will find that after you have maintained the above setting and have created a SD successfully, the reconcilation key field in the header for the security deposit line item is blank, i.e. it is not captured in a recon key as it is statistical in nature.
Thanks,
Amlan

Does User exit exsist for the following transaction

i want to ask that does user exit exsist for the following transaction code
IK01
IK02
IP42
what data they fetch ?
Edited by: Iftikhar Qayyum on Feb 21, 2008 9:40 PM

i want to ask that does user exit exsist for the following transaction code
IK01
IK02
IP42
what data they fetch ?
Edited by: Iftikhar Qayyum on Feb 21, 2008 9:40 PM

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

User exit asking for access key in CMOD

Similar Messages

Maybe you are looking for