User-Exit / Badi  for ML81n (create service entry sheet)

Dear experts,
I am looking for a User-Exit / Badi  for ML81n (create service entry sheet),  which will enable me to compare its date with the referenced PO's item's delivery-date,   befor saving ,  and send an error message (with no update) if the check is not OK.
Remark :  I have tried MB_DOCUMENT_BADI   but with no success because you can't send an error message from it.
Thank you
Yaacov

hi check below thread
User-Exit for Service Entry Sheet via ML81N?
regards
vijay

Similar Messages

  • User EXIT/BADI for new creating commitment in transaction TRIP

    Hi,
    We have a requirement where we do not want to create commitment at the time of creation of expense statement by employee (we are creating expense statement using tcode TRIP), it should post to actual budget at the time of posting of expenses to FI  through tcode PRRW.
    Is there any BADI/Userexit by which we can achieve this.
    Thanks & Regards,
    Jyoti

    no reply recd. so closing this question

  • Is a BAPIBadi available for uploading data to create Service Entry Sheet?

    Dear MM Gurus,
    Users are currently entering Service PO and creating Service Entry sheet for the Subcontractor consultants  (using Transaction code - ML81N) by referring to the Service PO.
    Due to the high amount of data, the users do not want to create Service Entry sheet using ML81N.
    Rather, they have the flat files containing approved timesheet data of the consultants every month and want to upload the flat files. Is there any BAPI or BADI available for uploading such data monthly, to create a Service Entry sheet automatically? Is this feasible?
    Do other companies follow this procedure? Any ideas/suggestions are welcome.
    thanks
    M

    Hello ,,,
    BAPI_ENTRYSHEET_CREATE
    Take the help of ABAPER and write a upload progrme for creation of Service entry sheet.
    Mahesh Naik

  • User ID restriction for Project/WBS to create service entry sheet

    Dear All,
    My client requirement is that the user id should be restrict for particular project or WBS to create service entry sheet(ML81N). Can we do it in this manner?
    Further i want to give you my organization structure as given below.
    1. Project :-   20
    2. Plant    :-  Single
    3. Bus. Area:- 2
    4. Co area :- Single.
    Thanx,
    Vishal Kr. Sharma

    Standard restriction is possible for this T code based on document type,purchasing group,purchasing org and plant.
    Others being ruled out I think solution is to restirct using purchasing group which is smaller entity.
    Regards
    Sreenivas

  • User Exit / BADi for TCode -  IMA11 (Create Appropriation Request )

    Hi friends ,
                Can anyone help me in finding the User Exit / BADI for Transaction IMA11 (Create Appropriation Request , Module - FI ).I want to create search help for field "Partner" in table control "Person Involved" present in this transaction.
    Thanks in advance.
    Regards
    Nand Kishor

    Hi,
      The following user exits are available :
    Exit Name           Description
    AAIR0001            IM-IS: User value fields in app.req. reporting
    AAIR0002            IM-FA: User fields for app. requests
    AAIR0003            IM: Workplace assignmt when creating PM order from app.req.
    AAIR0004            IM Drilldown: Definition of User-Defined Characteristics
    AAIR0006            IM-FA-IA: Data Transfer from App. Req. to WBS Element
    regards
    Aveek

  • User Exit / BADI for Transaction IW31 to create a POP-UP.

    Hi,
    I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.

    Hi!
    In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
    If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
    Regards
    Tamá

  • Project type restriction of user to create service entry sheet

    Dear Guru,
    My client want to restrict service entry sheet with his own project type. Can i restrict user id for my project type to create service entry sheet.
    Thanxs in advance.

    Dear Sir,
    If you know any user exit or badi pls. tell me.
    Thanx.

  • Error message SE508 while create Service Entry Sheet (ML81N)

    Hi,
    In client production system we are facing problem of getting error message SE508: Error in account coding allocation just after we click "adopt services"tab while creating service entry sheet (with respect to PO)Tcode ML81N.Please analyse the problem and give us solution as why it is happening? Please look at error screen shot with steps followed (in attachment) for your reference.
    ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.> click "adopt services"> here we get error message "SE508":ERROR IN ACCOUNT CODING ALLOCATION
    Regards
    Rahul Shukla

    Hi,
    I would suggest you to check the note 1087090 first.                                                                               
    Further I would like to recommend you to deactivate the exit EXIT_SAPLMLSK_001 in case it is active in               
    your system. 
    If the note 1087090 doesn't apply, please check the services data in the tables ESKL and ESLL. If PO services data have been deleted in the corresponding PO item, please check all of the deletion indicators in ESKL and ESLL. There must be an inconsistency. For example: the field 'LOEKZ' has been set in the table ESKL for the PO item, but it does not reflect in the table ESLL.                                                                               
    In table ESLL, there is no logical or physical deletion but the            
    services in the table ESKL has been marked (i.e logically deleted) -> this could be the reason for the error message SE508.  For this case please open a SAP ticket to get help with the correction of the inconsistency.
    Regards,
    Edit

  • User exit / BADI for CO01

    Hi all,
    I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
    Thanks and regards
    Jijo

    Exit Name           Description
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines

  • User-Exits/Badis for T.Code Co01 Production Order

    Hi Friends,
    Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
    Thanks,
    Ravi...........

    These are the available user exits..
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines

  • User exit/BADI for Deleting the Empty Handling unit

    Hi All,
    Can anyone give me the suitable User exit/BADI for the below scenario.
    While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
    Thanks in advance.
    Thanks
    Ramesh.

    Find below couple of  User Exits for Transfer Order.
    MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
    MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
    The Exits gives you access to LTAK and LTAP.....
    Hope this is helpful to you.
    Vinodh Balakrishnan

  • User exit / BADI for billing block in VL01n

    Hello Techies,
    Through custom transaction we are creating delivery notes. We run a background job to pick up these delivery notes & create return deliveries using BDC call transaction method calling VL01N (We also create order of type return for same). Though i can not see any place where billing block is filled in custom program but still there are some deliveries with billing block. Could you please let me know if there is any User exit / BADI for billing block or any configuration setting for same?

    Just to add more details:
    Our program sets memory id field.
    We call transaction VL01N.
    program clears memory id field value.
    all this happens in loop for number of deliveries.
    In VL01 user exit overwrites LIKP-FAKSK value to 05. However we have written code here which imports value from memory id. by this we come to know that we have created this delivery using custom transaction & billing block should not be set.
    From this we can conclude that only when sy-subrc for import memory id is not equal to 0 then billing block is set.
    what could be the reason for sy-subrc for import memory id is not equal to 0 ?
    can it be because of number of deliveries created at a time where memory id export / import is causing problem?
    we are not able to replicate this issue in Dev/Quality systems.
    Thanks & Regards,
    Sachin

  • User exit / badi for transaction appcreate

    Hi,
      Can nyone help me in getting user exit / badi for transaction appcreate .
    Cheers
    kamlesh

    Hi Kamlesh,
    Try below code to know the userexits for the given trxn code.
    Regards,
    Raj
    *& Report  ZTESTRAJ_USEREXITS
    REPORT  ztestraj_userexits
            NO STANDARD PAGE HEADING
            LINE-SIZE 200
            MESSAGE-ID zz.
           T A B L E    D E C L A R A T I O N S                          *
    TABLES: tftit,
            e071,
            e070.
                  S T R U C T U R E  D E C L A R A T I O N S             *
    TYPES: BEGIN OF x_tstc,
            tcode TYPE tcode,
            pgmna TYPE program_id,
           END OF x_tstc.
    TYPES: BEGIN OF x_tadir,
            obj_name TYPE  sobj_name,
            devclass TYPE devclass,
           END OF x_tadir.
    TYPES: BEGIN OF x_slog,
            obj_name TYPE sobj_name,
           END OF x_slog.
    TYPES: BEGIN OF x_final,
            name TYPE smodname,
            member TYPE modmember,
            include(15),            "Include name
           END OF x_final.
           I N T E R N A L    T A B L E    D E C L A R A T I O N S       *
    DATA: it_tstc  TYPE STANDARD TABLE OF x_tstc  WITH HEADER LINE.
    DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
    DATA: it_jtab  TYPE STANDARD TABLE OF x_slog  WITH HEADER LINE.
    DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
               V A R I A B L E S      D E C L A R A T I O N S            *
                    U S E R   I N P U T S   S C R E E N                  *
                      S E L E C T I O N    S C R E E N                   *
    SELECTION-SCREEN:  BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
    PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK blk01.
                    S t a r t    o f    S e l e c t i o n                *
    START-OF-SELECTION.
      PERFORM get_tcodes.  "Get Tcodes
      PERFORM get_objects. "Get Objects
                    E n d    o f    S e l e c t i o n                    *
    END-OF-SELECTION.
      PERFORM display_results. "Display Results
    *&      Form  get_tcodes
          Get Tcodes
    FORM get_tcodes.
      SELECT tcode
             pgmna
         INTO TABLE it_tstc
         FROM tstc
         WHERE tcode = p_tcode.
      IF sy-subrc = 0.
        SORT it_tstc BY tcode.
      ENDIF.
    ENDFORM.                    " get_tcodes
    *&      Form  get_objects
          Get Objects
    FORM get_objects.
      DATA: l_fname LIKE rs38l-name,
            l_group LIKE rs38l-area,
            l_include LIKE rs38l-include,
            l_namespace LIKE rs38l-namespace,
            l_str_area LIKE rs38l-str_area.
      DATA: v_include LIKE rodiobj-iobjnm.
      DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
      DATA: l_line TYPE string,
            l_tabix LIKE sy-tabix.
      IF NOT it_tstc[] IS INITIAL.
        SELECT obj_name
               devclass
            INTO TABLE it_tadir
            FROM tadir FOR ALL ENTRIES IN it_tstc
            WHERE pgmid = 'R3TR' AND
                  object = 'PROG' AND
                  obj_name = it_tstc-pgmna.
        IF sy-subrc = 0.
          SORT it_tadir BY obj_name devclass.
          SELECT obj_name
            INTO TABLE it_jtab
            FROM tadir FOR ALL ENTRIES IN it_tadir
            WHERE pgmid = 'R3TR' AND
                  object = 'SMOD' AND
                  devclass = it_tadir-devclass.
          IF sy-subrc = 0.
            SORT it_jtab BY obj_name.
          ENDIF.
        ENDIF.
      ENDIF.
    *- Get UserExit names
      LOOP AT it_jtab.
        SELECT name
               member
           INTO (it_final-name, it_final-member)
           FROM modsap
           WHERE name = it_jtab-obj_name AND
                 typ  = 'E'.
          APPEND it_final.
          CLEAR  it_final.
        ENDSELECT.
      ENDLOOP.
    *- Process it_final contents.
      LOOP AT it_final.
        l_tabix = sy-tabix.
        CLEAR: l_fname,
             l_group,
             l_include,
             l_namespace,
             l_str_area.
        l_fname = it_final-member.
        CALL FUNCTION 'FUNCTION_EXISTS'
          EXPORTING
            funcname           = l_fname
          IMPORTING
            group              = l_group
            include            = l_include
            namespace          = l_namespace
            str_area           = l_str_area
          EXCEPTIONS
            function_not_exist = 1
            OTHERS             = 2.
        IF sy-subrc = 0.
          IF NOT l_include IS INITIAL.
    *- Get Source code of include.
            CLEAR: v_include, e_t_include, e_t_include[].
            v_include = l_include.
            CALL FUNCTION 'MU_INCLUDE_GET'
              EXPORTING
                i_include   = v_include
              TABLES
                e_t_include = e_t_include.
            IF sy-subrc = 0.
              LOOP AT e_t_include.
                IF e_t_include-line CS 'INCLUDE'.
                  CLEAR l_line.
                  l_line = e_t_include-line.
                  CONDENSE l_line NO-GAPS.
                  TRANSLATE l_line USING '. '.
                  l_line = l_line+7(9).
                  it_final-include = l_line.
                  MODIFY it_final INDEX l_tabix TRANSPORTING include.
                ENDIF.
              ENDLOOP.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " get_objects
    *&      Form  display_results
          Display Results
    FORM display_results.
      FORMAT COLOR COL_HEADING.
      WRITE:/1(150) sy-uline.
      WRITE:/ sy-vline,
            2(23) 'Extension Name',
            24 sy-vline,
            25(39) 'Exit Name',
            64 sy-vline,
            65(74) 'Description',
            140 sy-vline,
            141(9) 'Include',
            150 sy-vline.
      WRITE:/1(150) sy-uline.
      FORMAT RESET.
      SORT it_final BY name member.
      LOOP AT it_final.
        CLEAR tftit.
        SELECT SINGLE  stext
          INTO tftit-stext
          FROM tftit
          WHERE spras = 'EN' AND
                funcname = it_final-member.
        WRITE:/ sy-vline,
                it_final-name COLOR COL_KEY, 24 sy-vline,
                25 it_final-member, 64 sy-vline,
                65 tftit-stext, 140 sy-vline,
                141 it_final-include, 150 sy-vline.
        WRITE:/1(150) sy-uline.
      ENDLOOP.
    ENDFORM.                    " display_results

  • User exit / BADI for training and event management

    Hi all,
    Can anybody tell me if there is any user exit / BADI for training and event management module?
    Thanks & regards,
    LOI

    Hi
    BADI's for Training and Event Management
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
    HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
    HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
    HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
    HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
    HRTEM_READ_OBJECT      Customer Enhancement: Name Format
    RHPV0001 Customer      Enhancement for Additional Checks for Booking
    Enhancemnet Spot:
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    ~~~Ganesh Kumar K.

  • Error: while creating Service Entry Sheet - for HELD PO

    Hi experts,
    While PO XXXXXXXXXX is in the status of Hold. System allowed me to create & delete a service entry sheet(SES) on particular date.
    Another day i tried to create SES for the same PO. System is not allowing me to create SES and it gives me error as  'Purchase order XXXXXXXXXX incomplete (parked)'.
    While debugging I found that ekko-memory field set to 'X'. At this point I am getting error.
    My question is why the system is allowed me to create SES for a PO which is in HELD status?.
    Please help me.
    Thanks In advance,
    Vinod

    Thanks for the reply.
    We are aware that system will not allow to create Service entry sheet for held po. But it is allowed me to create on a particular date. Another day i tried to create/delete a SES for the same PO or new PO(held status)  system is not allowing me to delete/create SES.
    Please help me what might be the reason which allowed me on a particulare date.
    Thanks in Advance,
    Vinod....

Maybe you are looking for