User Exit/BAdi for Number Range

Hi All,
Can anyone tell me is there any User Exit/BAdi for Number Range?
Rgds,
Trinadha

Hi,
Please check RHIV0001 through transaction SMOD.
Hope this helps.
Donnie

Similar Messages

  • MIGO exit/ BADI for number range

    Hi All,
    When I am doing MIGO, then I want that after posting, a particular document no should be genrated which is wrt particular PO Number range.
    For example, One PO No range is from, lets say, 1000 to 1999, then Doc no generated is, lets say 100 to 199,
    and if PO no range is 2000 to 2999 then Doc no generated should be from 200 to 299.
    So is there any BADI or user exit for the same or is there any other way of doing the same.
    Please guide me.
    Vinod.

    Hi Mylene,
    The actual rqmt is I want to generate MIGO doc number wrt PO Document type..
    As you are asking that there could be multiple GR's for one particular PO, so all these GR's will be having one particular number range, lets say from 1000000000 to 1999999999.
    I have got one enhancement ES_SAPMM07M, where its selecting number range from table NRIV.
    But the problem is I am not able to implemet this from se18 or se19.
    Now could u plz tell me the suggestions...
    Vinod.

  • In ME21N,User Exit/BADI for  Defaulting  Vendor number at item level.

    Hi Experts.
    In ME21N, for every purchase order, we have condtion tab for each line item.
    Many condition typesot taxes  are listed based on the config for the materials.
    My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
    I need a user exit/BADI for defaulting the Vendor number.
    Regards
    Balaji R

    Hi,
    check with below link,
    fo this one you will find both user exit and badis
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
    Regards,
    Madhu

  • User exit/BADI for Deleting the Empty Handling unit

    Hi All,
    Can anyone give me the suitable User exit/BADI for the below scenario.
    While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
    Thanks in advance.
    Thanks
    Ramesh.

    Find below couple of  User Exits for Transfer Order.
    MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
    MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
    The Exits gives you access to LTAK and LTAP.....
    Hope this is helpful to you.
    Vinodh Balakrishnan

  • User exit / BADI for billing block in VL01n

    Hello Techies,
    Through custom transaction we are creating delivery notes. We run a background job to pick up these delivery notes & create return deliveries using BDC call transaction method calling VL01N (We also create order of type return for same). Though i can not see any place where billing block is filled in custom program but still there are some deliveries with billing block. Could you please let me know if there is any User exit / BADI for billing block or any configuration setting for same?

    Just to add more details:
    Our program sets memory id field.
    We call transaction VL01N.
    program clears memory id field value.
    all this happens in loop for number of deliveries.
    In VL01 user exit overwrites LIKP-FAKSK value to 05. However we have written code here which imports value from memory id. by this we come to know that we have created this delivery using custom transaction & billing block should not be set.
    From this we can conclude that only when sy-subrc for import memory id is not equal to 0 then billing block is set.
    what could be the reason for sy-subrc for import memory id is not equal to 0 ?
    can it be because of number of deliveries created at a time where memory id export / import is causing problem?
    we are not able to replicate this issue in Dev/Quality systems.
    Thanks & Regards,
    Sachin

  • USER-EXIT/BADI for "MIRA"

    Hello Gurus,
    My requirement is that I need to change an Invoice Line Item data before the actual posting in Background via Program RMBABG00.
    It would be great if somebody could please tell me, is there any USER-EXIT / BADI for doing the above mentioned task.
    I will be really helpful as it is very urgent!!!!!
    Thanks in advance

    Hi,
    these user exits avialable for Tcode MIRA...
    LMR1M001            User exits in Logistics Invoice Verification
    LMR1M002            Account grouping for GR/IR account maintenance
    LMR1M003            Number assignment in Logistics Invoice Verification
    LMR1M004            Logistics Invoice Verification: item text for follow-on docs
    LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
    LMR1M006            Logistics Invoice Verification: Process XML Invoice
    MRMH0001            Logistics Invoice Verification: ERS procedure
    MRMH0002            Logistics Invoice Verification: EDI inbound
    MRMH0003            Logistics Invoice Verification: Revaluation/RAP
    MRMN0001            Message output and creation: Logistics Invoice Verification
    regds,
    paras

  • User exit / BADI for CO01

    Hi all,
    I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
    Thanks and regards
    Jijo

    Exit Name           Description
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines

  • User exit / BADI for training and event management

    Hi all,
    Can anybody tell me if there is any user exit / BADI for training and event management module?
    Thanks & regards,
    LOI

    Hi
    BADI's for Training and Event Management
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
    HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
    HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
    HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
    HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
    HRTEM_READ_OBJECT      Customer Enhancement: Name Format
    RHPV0001 Customer      Enhancement for Additional Checks for Booking
    Enhancemnet Spot:
    HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
    ~~~Ganesh Kumar K.

  • User Exit/Badi for G/L account assignment in ME21n/ME22n

    Hi All,
    I need user exit/badi for account assignment in item details for following requirement.
    If user changes G/L account of the first line item then I have to copy same G/L account to all line items.
    Please suggest me suitable user exit for this.

    hello,
    follow the steps.......
    For User Exit's
    goto to tcode->status->program name->double click on that,
    then goto to-> attribute take the package name and
    Goto SMOD tcode ->Utilities->give the package name and F8
    then a list of exits will display for that tcode as well as that package.
    u can check the table MODSAP
    For BADI's,
    1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
    keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
    then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
    2)Goto to tcode->status->program name->double click on that program will display's
    then  press crtl+F then cl_exithandler
    Thank u,
    santhosh

  • Request for info. on USER EXIT/BADI for FB60

    Hi,
    This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
    ]Please guide some alternative solution rather than user exit and badi.
    I dont think the following user exit and badi are used for withholding tax.
    I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
    F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002 FIDCC1: Change IDoc/do not send
    F050S003 FIDCC2: Change IDoc/do not send
    F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001 Balance Sheet Adjustment
    FARC0002 Additional Checks for Archiving MM Vendor Master Data
    FEDI0001 Function Exits for EDI in FI
    RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00 Line item display: Checking of selection conditions
    RFKORIEX Automatic correspondence
    SAPLF051 Workflow for FI (pre-capture, release for payment)
    Badi
    FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
    Every expert answer will be rewarded.
    Thanks in advance
    Cra

    Try Business Transaction Events. Transaction code BERP.
    Regards,
    Zoltá

  • User Exit / BADI for  F-02 during SAVE to update BSEG Line Items.

    Hi Experts,
    I need a User Exit / BADI for Transaction code F-02 which triggers during save to update  BSEG-SGTXT with Vendor / Customer 
    name in the Tax Line Item.This is to update table BSEG .
    Thanks in Advance,
    Nithy

    Hi,
    Do it with the BTE 00001120 (tcode FIBF).
    I hope this helps you
    Regards,
    Eduardo
    PD: I forgot, check this link. It will tell you how to do it
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
    Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

  • User Exit & BADI for controling the END user in co06

    Hi
    I HAVE SOME 2 DOUBTS
    1.  I  need a user exit /  BADI  for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
    the control should be actve for specfic order type for specfic users
    2  DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

    Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

  • User Exit / BADI for Transaction IW31 to create a POP-UP.

    Hi,
    I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.

    Hi!
    In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
    If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
    Regards
    Tamá

  • User exit /Badi for CJ20N

    Hi All,
    Can anyone plz tell me if there is any User exit /Badi for CJ20N which triggers at the time of releasing the project or after releasing saving the project.
    Thanks
    Pragya

    Hi,
    Put a breakpoint in the class cl_exithandler in method get_instance.
    Check any BADI is triggering at the time of release or save
    Regards
    Praveen

  • User Exit / BADi for TCode -  IMA11 (Create Appropriation Request )

    Hi friends ,
                Can anyone help me in finding the User Exit / BADI for Transaction IMA11 (Create Appropriation Request , Module - FI ).I want to create search help for field "Partner" in table control "Person Involved" present in this transaction.
    Thanks in advance.
    Regards
    Nand Kishor

    Hi,
      The following user exits are available :
    Exit Name           Description
    AAIR0001            IM-IS: User value fields in app.req. reporting
    AAIR0002            IM-FA: User fields for app. requests
    AAIR0003            IM: Workplace assignmt when creating PM order from app.req.
    AAIR0004            IM Drilldown: Definition of User-Defined Characteristics
    AAIR0006            IM-FA-IA: Data Transfer from App. Req. to WBS Element
    regards
    Aveek

Maybe you are looking for

  • How do i stop iPhone from sharing with mac

    how do i stop iPhones sharing texts with mac

  • GRC AC 5.3 SP10: Query Data Mart Tables using MS Access ODBC

    Dear all, I have created a ODBC-connection from MS Access on my computer to the GRC AC 5.3 SP10 Data Mart Tables according to the Guide "Data Mart Reporting with SAP BusinessObjects Access Control 5.3". Now I want to start a query on e.g. DM Table GR

  • Window.open in IE with URL "file:///" results in "Access is Denied" error

    Hi All: In a JSP, which gets launched with HTTP or HTTPS protocol, we have a link to open/view the file(attached from local PC) after it gets uploaded to the server. We used the "file:" protocol to open it in a new window. Currently we are stuck with

  • Generating small sections

    Hi Robohelpers, would really appreciate a moment of your time, pretty sure this won't be too difficult a question... I have basically inherited a mess of a project, in Robohelp 8, which I am slowly trying to unravel. Unfortunately for me my experienc

  • PSE 8 Names vs Tags

    I am using PSE 8 and have several people tags. When I do a face recognition and "name" a person, is that somehow connected to the name tag (if they are the same)? I've been syncing my catalog with photoshop.com. I can have 8 copies of the same tag wi