User Exit / BADi for TCode - IMA11 (Create Appropriation Request )

Hi friends ,
Can anyone help me in finding the User Exit / BADI for Transaction IMA11 (Create Appropriation Request , Module - FI ).I want to create search help for field "Partner" in table control "Person Involved" present in this transaction.
Thanks in advance.
Regards
Nand Kishor

Hi,
The following user exits are available :
Exit Name           Description
AAIR0001            IM-IS: User value fields in app.req. reporting
AAIR0002            IM-FA: User fields for app. requests
AAIR0003            IM: Workplace assignmt when creating PM order from app.req.
AAIR0004            IM Drilldown: Definition of User-Defined Characteristics
AAIR0006            IM-FA-IA: Data Transfer from App. Req. to WBS Element
regards
Aveek

Similar Messages

User Exit / BADI for TCODE PSV1

Hi
Can any body let me know the BADI / User Exit Name for tcode PSV1 Scenario is as under
when ever Business event created with resource in PSV1 , I need to send data to other system at the time of creation.
Regards
Ammad

Hi,
Execute transaction SE24
Give class name CL_EXITHANDLER
Open GET_INSTANCE method.
Set a break point below line
CALL METHOD cl_exithandler=>get_class_name_by_interface
Now run trasaction PSV1, and your control will break at each BADI(If any), exit name and instance will give you the BADI details.
I think this is one of the simplest way.
Thanks

User Exit / BADI for Transfer Requirement Create

Hi All,
I have looked into the system and i could not find any User Exit or BADI for creation of Transfer requirement. This is for manual creation through LB01 and not interface with PP or IM. I am aware of the Userexits available for those, but i could not find any for WM TR Manual creation.
Let me know if you are aware of any.
Thanks
Jithin

When you create a transfer requirement, i want to make it mandatory to enter the destination bin, for example. The Transfer Requirement should not be saved if it is not entered.
I know we can do this by creating multiple movement types for each destination, but i want to know if there is a way where the user can enter the destination when creating a TR with a single movement type.
Jithin

User-Exit / Badi for ML81n (create service entry sheet)

Dear experts,
I am looking for a User-Exit / Badi for ML81n (create service entry sheet), which will enable me to compare its date with the referenced PO's item's delivery-date, befor saving , and send an error message (with no update) if the check is not OK.
Remark : I have tried MB_DOCUMENT_BADI but with no success because you can't send an error message from it.
Thank you
Yaacov

hi check below thread
User-Exit for Service Entry Sheet via ML81N?
regards
vijay

User Exit / BADI for Transaction IW31 to create a POP-UP.

Hi,
I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.

Hi!
In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
Regards
Tamá

User Exit/Badi for G/L account assignment in ME21n/ME22n

Hi All,
I need user exit/badi for account assignment in item details for following requirement.
If user changes G/L account of the first line item then I have to copy same G/L account to all line items.
Please suggest me suitable user exit for this.

hello,
follow the steps.......
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u,
santhosh

User Exit / BADI for F-02 during SAVE to update BSEG Line Items.

Hi Experts,
I need a User Exit / BADI for Transaction code F-02 which triggers during save to update BSEG-SGTXT with Vendor / Customer
name in the Tax Line Item.This is to update table BSEG .
Thanks in Advance,
Nithy

Hi,
Do it with the BTE 00001120 (tcode FIBF).
I hope this helps you
Regards,
Eduardo
PD: I forgot, check this link. It will tell you how to do it
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

User exit/BADI for Deleting the Empty Handling unit

Hi All,
Can anyone give me the suitable User exit/BADI for the below scenario.
While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
Thanks in advance.
Thanks
Ramesh.

Find below couple of User Exits for Transfer Order.
MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
The Exits gives you access to LTAK and LTAP.....
Hope this is helpful to you.
Vinodh Balakrishnan

User exit / BADI for billing block in VL01n

Hello Techies,
Through custom transaction we are creating delivery notes. We run a background job to pick up these delivery notes & create return deliveries using BDC call transaction method calling VL01N (We also create order of type return for same). Though i can not see any place where billing block is filled in custom program but still there are some deliveries with billing block. Could you please let me know if there is any User exit / BADI for billing block or any configuration setting for same?

Just to add more details:
Our program sets memory id field.
We call transaction VL01N.
program clears memory id field value.
all this happens in loop for number of deliveries.
In VL01 user exit overwrites LIKP-FAKSK value to 05. However we have written code here which imports value from memory id. by this we come to know that we have created this delivery using custom transaction & billing block should not be set.
From this we can conclude that only when sy-subrc for import memory id is not equal to 0 then billing block is set.
what could be the reason for sy-subrc for import memory id is not equal to 0 ?
can it be because of number of deliveries created at a time where memory id export / import is causing problem?
we are not able to replicate this issue in Dev/Quality systems.
Thanks & Regards,
Sachin

USER-EXIT/BADI for "MIRA"

Hello Gurus,
My requirement is that I need to change an Invoice Line Item data before the actual posting in Background via Program RMBABG00.
It would be great if somebody could please tell me, is there any USER-EXIT / BADI for doing the above mentioned task.
I will be really helpful as it is very urgent!!!!!
Thanks in advance

Hi,
these user exits avialable for Tcode MIRA...
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
regds,
paras

User exit / BADI for CO01

Hi all,
I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
Thanks and regards
Jijo

Exit Name           Description
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User exit / badi for transaction appcreate

Hi,
Can nyone help me in getting user exit / badi for transaction appcreate .
Cheers
kamlesh

Hi Kamlesh,
Try below code to know the userexits for the given trxn code.
Regards,
Raj
*& Report ZTESTRAJ_USEREXITS
REPORT ztestraj_userexits
        NO STANDARD PAGE HEADING
        LINE-SIZE 200
        MESSAGE-ID zz.
       T A B L E    D E C L A R A T I O N S                          *
TABLES: tftit,
        e071,
        e070.
              S T R U C T U R E D E C L A R A T I O N S             *
TYPES: BEGIN OF x_tstc,
        tcode TYPE tcode,
        pgmna TYPE program_id,
       END OF x_tstc.
TYPES: BEGIN OF x_tadir,
        obj_name TYPE sobj_name,
        devclass TYPE devclass,
       END OF x_tadir.
TYPES: BEGIN OF x_slog,
        obj_name TYPE sobj_name,
       END OF x_slog.
TYPES: BEGIN OF x_final,
        name TYPE smodname,
        member TYPE modmember,
        include(15),            "Include name
       END OF x_final.
       I N T E R N A L    T A B L E    D E C L A R A T I O N S       *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
           V A R I A B L E S      D E C L A R A T I O N S            *
                U S E R   I N P U T S   S C R E E N                  *
                  S E L E C T I O N    S C R E E N                   *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
                S t a r t    o f    S e l e c t i o n                *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
                E n d    o f    S e l e c t i o n                    *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*&      Form get_tcodes
      Get Tcodes
FORM get_tcodes.
SELECT tcode
         pgmna
     INTO TABLE it_tstc
     FROM tstc
     WHERE tcode = p_tcode.
IF sy-subrc = 0.
    SORT it_tstc BY tcode.
ENDIF.
ENDFORM.                    " get_tcodes
*&      Form get_objects
      Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
        l_group LIKE rs38l-area,
        l_include LIKE rs38l-include,
        l_namespace LIKE rs38l-namespace,
        l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
        l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
    SELECT obj_name
           devclass
        INTO TABLE it_tadir
        FROM tadir FOR ALL ENTRIES IN it_tstc
        WHERE pgmid = 'R3TR' AND
              object = 'PROG' AND
              obj_name = it_tstc-pgmna.
    IF sy-subrc = 0.
      SORT it_tadir BY obj_name devclass.
      SELECT obj_name
        INTO TABLE it_jtab
        FROM tadir FOR ALL ENTRIES IN it_tadir
        WHERE pgmid = 'R3TR' AND
              object = 'SMOD' AND
              devclass = it_tadir-devclass.
      IF sy-subrc = 0.
        SORT it_jtab BY obj_name.
      ENDIF.
    ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
    SELECT name
           member
       INTO (it_final-name, it_final-member)
       FROM modsap
       WHERE name = it_jtab-obj_name AND
             typ = 'E'.
      APPEND it_final.
      CLEAR it_final.
    ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
    l_tabix = sy-tabix.
    CLEAR: l_fname,
         l_group,
         l_include,
         l_namespace,
         l_str_area.
    l_fname = it_final-member.
    CALL FUNCTION 'FUNCTION_EXISTS'
      EXPORTING
        funcname           = l_fname
      IMPORTING
        group              = l_group
        include            = l_include
        namespace          = l_namespace
        str_area           = l_str_area
      EXCEPTIONS
        function_not_exist = 1
        OTHERS             = 2.
    IF sy-subrc = 0.
      IF NOT l_include IS INITIAL.
*- Get Source code of include.
        CLEAR: v_include, e_t_include, e_t_include[].
        v_include = l_include.
        CALL FUNCTION 'MU_INCLUDE_GET'
          EXPORTING
            i_include   = v_include
          TABLES
            e_t_include = e_t_include.
        IF sy-subrc = 0.
          LOOP AT e_t_include.
            IF e_t_include-line CS 'INCLUDE'.
              CLEAR l_line.
              l_line = e_t_include-line.
              CONDENSE l_line NO-GAPS.
              TRANSLATE l_line USING '. '.
              l_line = l_line+7(9).
              it_final-include = l_line.
              MODIFY it_final INDEX l_tabix TRANSPORTING include.
            ENDIF.
          ENDLOOP.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.                    " get_objects
*&      Form display_results
      Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
        2(23) 'Extension Name',
        24 sy-vline,
        25(39) 'Exit Name',
        64 sy-vline,
        65(74) 'Description',
        140 sy-vline,
        141(9) 'Include',
        150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
    CLEAR tftit.
    SELECT SINGLE stext
      INTO tftit-stext
      FROM tftit
      WHERE spras = 'EN' AND
            funcname = it_final-member.
    WRITE:/ sy-vline,
            it_final-name COLOR COL_KEY, 24 sy-vline,
            25 it_final-member, 64 sy-vline,
            65 tftit-stext, 140 sy-vline,
            141 it_final-include, 150 sy-vline.
    WRITE:/1(150) sy-uline.
ENDLOOP.
ENDFORM.                    " display_results

User-Exits/Badis for T.Code Co01 Production Order

Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........

These are the available user exits..
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

Request for info. on USER EXIT/BADI for FB60

Hi,
This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
]Please guide some alternative solution rather than user exit and badi.
I dont think the following user exit and badi are used for withholding tax.
I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Badi
FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
Every expert answer will be rewarded.
Thanks in advance
Cra

Try Business Transaction Events. Transaction code BERP.
Regards,
Zoltá

User Exit / BADi for TCode - IMA11 (Create Appropriation Request )

Similar Messages

Maybe you are looking for