User-Exit/Badi For Vendor Down Payment Request

hi All,
Is there any user-exit or badi available for vendor down payment request?
tcode:f-47.
please let me know.
Thanks & Regards,
Raj

I want to trigger an event for workflow when
a vendor down payment request is created in
*tcode f-47.*
Well if you are not able to find the correct enhamcement spot then you can approach as below
When ever you create a New Item In the Tcode F-47 the if you succesfully saves the data then it prompts you a message like below
*Document 1700000000 was posted in company code 2100*
So instead of searching for Exits or BAdi's try to Start workflow by using the message
for this all you need to bind the message and the Workflow , for this you have use the transaction SWUY it is a wizard where you need to specify the Message class and the message number

Similar Messages

Badi/User-exit for vendor down payment request in f-47

hi all,
is there any badi/user-exit available for vendor down payment request?
I need to trigger a workflow when a vendor down payment request in transaction code F-47.
how can i do this?
Pls guide me.
Thanks & regards,
Raj

Did it using a business transaction event

Partial payment for Vendor down payment request

Hi Gurus
How to do partial payment for vendor down payment request using F-48
If i enter partial amount next time same request is not appearing in the list.
Pls guide me. Reply will be appreciated with full points
Thanks in advacne
Sneha

Hi Ravi
Thanks for info
My doubt is MM is creting Down payment request using F-47 For ex Rs100000
for this request using F-48 i want to pay partialally means for Rs50000
Balance i want to pay it later, How this can be done.
Pls guide me
Rgds
Sneha

Workflow for vendor down payment request

hi All,
i need to develop a workflow for vendor down payment request as there is no standard workflow available.
But not able to find any business object for it. Is there any standard business object available for it?
If no what are the steps that i should follow to create a business object for vendor down payment request?
plz guide me.
Thanks & Regards,
K.Perumalraj
SAP Workflow Consultant

BKPF is the business object

Ehancement Spot for Vendor Down Payment Request F-47

Hi
I am trying to post a DP Request to Vendor with reference to a PO Document, which consists of various taxes. PO Base amount is 150 and Tax value is 25. When I am trying to pass a DP Request for more than 150 system is giving the error message "Order Value will be exceeded". Message Number is F5373.
If I change this error message to warning system will throw a warning message if the DPR value exceeds 150. I can proceed further but it will not restrict if another DP Request with reference to the same PO is passed.
How to restrict the system to accept only one Down Payment Request with reference to any given PO ?
Are there any user exits to be used ? if so please let me know. Also the enhancement spots in order to control multiple DP Requests against the same Purchase Order.
Thank you
Gemini

Hi,
You can create a validation (OB28), checking with user-exit that you'll create, whether there are down payments posted against PO. Pre-requisites could be the document type of down payment that you're using in the system or the trnsaction (F-47) itself.
Regards,
Eli

Vendor down payment request over PO value

Hi All,
I have a requirement for vendor down payment request amount compare to PO value checking.
I have PO with total value - 600 USD.
When I create down payment request using F-47, I input amount 1000 USD.
The system never show me any message.
I want the SAP to block me from posting down payment request over PO value.
I've read in the forum, to change message type F5373 with error type. But the message never appear in my F-47 screen.
Anyone can help me, what am I missing here ?
Thanks,

Hi,
You are right about message F5 373. But this is applicable at the time of the Payment of the Advance i.e. F-48. It is not available at the time of creating the Advance Payment Request against T Code F-47.
If you want to have this control in the Payment Request, then you will have to use the validation, which you can put with the help of your abaper.
Regards,
Amit

Request for info. on USER EXIT/BADI for FB60

Hi,
This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
]Please guide some alternative solution rather than user exit and badi.
I dont think the following user exit and badi are used for withholding tax.
I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Badi
FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
Every expert answer will be rewarded.
Thanks in advance
Cra

Try Business Transaction Events. Transaction code BERP.
Regards,
Zoltá

In ME21N,User Exit/BADI for Defaulting Vendor number at item level.

Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji R

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

User Exit / BADi for TCode - IMA11 (Create Appropriation Request )

Hi friends ,
            Can anyone help me in finding the User Exit / BADI for Transaction IMA11 (Create Appropriation Request , Module - FI ).I want to create search help for field "Partner" in table control "Person Involved" present in this transaction.
Thanks in advance.
Regards
Nand Kishor

Hi,
The following user exits are available :
Exit Name           Description
AAIR0001            IM-IS: User value fields in app.req. reporting
AAIR0002            IM-FA: User fields for app. requests
AAIR0003            IM: Workplace assignmt when creating PM order from app.req.
AAIR0004            IM Drilldown: Definition of User-Defined Characteristics
AAIR0006            IM-FA-IA: Data Transfer from App. Req. to WBS Element
regards
Aveek

User-Exit/Badi for F-47/F-58

Hi All,
I have a developed a custom workflow for f-47 (vendor down payment request). Now whenever the document is approved/rejected the status is stored in a custom ztable. This document is posted in f-58.
My requirement is whenver the document is rejected and if the user tries to post it through f-58, i need to do a validation using that custom table. The system should give a error message and should not allow the document to be posted if the status in the ztable for the document is rejected.
How can i achieve this??
Regards,
Raj

Hi Amit,
I am already using the BTE 00001030 to trigger the workflow.
Now my requirement is i just need to do the validation if the vendor down payment request is approved or rejected. This status is stored in z table. So if any user tries to post it externally without waiting for workflow approval system, i want to do this validation,.
How can i do it?/
Regards,
Raj

User exit/ badi for fb02 transaction

Hi,
what are the appropriate user exit/ badi for fb02 transaction for a disabling(graying out) a
payment block field for particular users..?
Regards,
Avi

Following are the exits available for FB02
F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
FEDI0001            Function Exits for EDI in FI
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)

Vendor down payment request Error

Hi all,
i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
Kindly help me,
Thanks in advance
Ani Varghese

Hi,
The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
You might not have maintained the GL Accounts for this. Maintained it in OB40.
Regards,
Amit

Vendor Down payment request

Hi,
I have 2 queries regarding vendor down payment request F-47
1) Want to create DPR on header level (We have ECC.6 No enhancement package)
2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will create multiple request of same line item with actual amount or less amount (but more then actual amount in total) will be not stop me.
I already active F5 373 message into error.
Thanks,
Farrukh khan

Hi,
You are getting this error becausea either you have giving more amount than the PO value or GRN and IV has already been created for this item.
You are requested to do create DPR as per below given screen shots
Press Enter
Click on
Hope, this solves your issue.
Regards,
Tejas

Vendor Down Payment Request on WBS (F-47)

Dear Fellows:
I have came across a problem that while creating a Vendor Down Payment request (T.code: F-47) on WBS, my system is not stoping me over budget exhaust. I have Budget of 100 and i create request for 101, system allows it and post the document.
Vice Versa if i create a Vendor Down Payment request over Commitment iten, then system check the budget and generates message.
any good solution to it would highly be appreciable.
Regards.

Hi,
The budget availability check is done only against the assigned values and
Following entried does not contribute to the Assigned value
    V: Value type not relevant (<> Act./Plan/Stat.Act./Stat.Plan/Commt)
    D: Delivery
    S: Settlement to object with no budget control
    R: Revenue cost element
    C: Cost element is exempt cost element
    M: Minimum from actual + commitment and plan per order value update
    P: Plan value is not on apportioned order / network
    B: Plan Costing Single Position
    S: Funds Commitment in Balance
So the down payment is not covered for the calculation of the assigned value.
Hence no check is carried out for the Availability check.
hope its useful.
Reward points if useful.
Thanks..

User Exit / BADI for F-02 during SAVE to update BSEG Line Items.

Hi Experts,
I need a User Exit / BADI for Transaction code F-02 which triggers during save to update BSEG-SGTXT with Vendor / Customer
name in the Tax Line Item.This is to update table BSEG .
Thanks in Advance,
Nithy

Hi,
Do it with the BTE 00001120 (tcode FIBF).
I hope this helps you
Regards,
Eduardo
PD: I forgot, check this link. It will tell you how to do it
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

User-Exit/Badi For Vendor Down Payment Request

Similar Messages

Maybe you are looking for