User exit / BADI on creation WBS

Hi all,
I'm looking for a way to access the fields of a WBS before displaying.
The field project type is filled in by default, and I would like to clear this. I looked for a user exit / BADI but wasn't able to find one whic allows me to do what I want.
Maybe that someone else has an idea ?
Thanks in advance !
kind regards,
Björn

Hi,
Please check this
you can use BADI WORKBREAKDOWN_UPDATE.
It has methods AT_SAVE and BEFORE_UPDATE.
Also check
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Hiren K.Chitalia

Similar Messages

  • User Exit/ BADI during creation of vendor master

    Dear Friends,
    During creation of vendormaster if the with holding tax is maintained then PAN no. field should be made mandatory.
    So far I know this can't done through standard field selection of vendor master. So this is to be done through BADI/User exit. Please provide me the same where in run time I can get PAN no field. It comes from the excise table.
    Regards

    First try for any Customization is available.
    If not we can achieve with enhancement point.
    Try to find out an implicit enhancement point on PAI event of the screen there validate for the "PAN No"
    if the "PAN No" is blank raise an error message & EXIT from the PAI.
    It would serve your purpose.
    Regards.
    Abhijit

  • User Exit/ Badi for Changing Quant parameters during TO Creation

    Hi Gurus,
    Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
    User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
    I will highly appreciate reply from Gurus.
    Regards,
    Gupta M

    Hi manish,
    Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
    Thanks,
    Shibashis

  • BAdI: or User Exit for Campaign Creation   IN CRM 5.0

    Hi all,
    we are working in CRM 5.0,
    we have a Requirement like :
    when we create the campaign it should check higher level project ID (marketing Plan ID)
    if it is there it should permit for create campaign else it ll show error...
    Any BAdI: or User Exit for Campaign Creation?
    I ll geive reward points....
    Rhanks & Regards,
    Ganesh

    IN WHICH TRANSACTION U R CREATING CAMPAIGN ??

  • User Exit / Badi / BTE for Asset creation A ?

    Hi Experts,
    I need User Exit  / BADI / BTE for asset Creation.
    After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
    i have tried all this.But no one is triggering after saving the As01 transaction.
    Exit Name           Description                                                                               
    AAPM0001            Integration of asset accounting and plant maintenance                    
    AFAR0003            External changeover method                                               
    AFAR0004            Determination of proportional values for retirement                      
    AINT0004            Change amount posted for certain areas                                   
    AINT0005            Dummy for extended syntax check. Do not use.                             
    AISA0001            Assign Inventory Number                                                  
    AIST0001            Exchange number range in master data maintenance                         
    AIST0002            Customer fields in asset master                                          
    AMSP0002            Determine relationship type for two company codes                        
    TRAN0001            User exit for asset transfer           
    Please suggest if anybody worked on this.
    regards,
    Imran

    Hi,
    Check out the following posts pertaining to similar topic.
    Change Asset Workflow
    Asset Management WORKFLOW
    Regards
    Sreekanth

  • User Exit/BADI for AS01 ( Asset Creation )

    Hi Xperts,
    My requirement is during asset creation in AS01, after asset generated i want to send asset no, subno, asset creation date, int. order no to ztable.
    Can anyone suggest user exit/BADI which suit this requirement.
    I have gone through forum search, but not found suitable object.
    Ram.

    Hi Ram,
    Check out below Badi and Enhancement
    BADI
    IHSA_LIST_EDITING
    ENHANCEMRNT
    EXIT_SAPLAAPM_002
    EXIT_SAPLAIST_001
    EXIT_SAPLAIST_002
    EXIT_SAPLAIST_003
    THANKS & REGARDS
    G.Vendhan
    Edited by: vendhan g on Jul 24, 2009 12:33 PM

  • BAdI: or User Exit  for Campaign Creation

    Hi all,
              we are working in CRM 5.0,
    we have a Requirement like :
          when we create the campaign it should check higher level project ID        (marketing Plan ID)
          if it is there it should permit for create campaign else it ll show error...
    Any BAdI: or User Exit  for Campaign Creation?
    I ll geive reward points....
    Rhanks & Regards,
    Ganesh

    Dear Ganesh,
    As campaign can be created and executed individually also, it will never check for higher level project ID.
    Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan.

  • User Exits / BADIs triggered during the Material document creation

    Hi Experts,
    Can anybody tell me the User Exits / BADIs /Possibilities that can be triggered during the Material Document Creation which can be used to update the Equipment Master User Statuses.
    Thanks,
    Sangeeta.

    Hey Sangeeta,
      Try these User Exit's
    MGA00001  Material Master (Industry): Checks and Enhancements
    MGA00002  Material Master (Industry): Number Assignment
    MGA00003  Material Master (Industry and Retail): Number Display
    Using Enhancement MGA00001 (Function Exit : EXIT_SAPLMGMU_001 ) you can validate & Change your Material Document Number.
    Badi's
    BADI_EAN_SYSTEMATIC
    BADI_GTIN_VARIANT
    BADI_MAT_F_SPEC_SEL
    BADI_MATERIAL_CHECK
    BADI_MATERIAL_OD
    BADI_MATERIAL_OD
    BADI_MATERIAL_REF
    BADI_MATNR_CHECK_PVS
    BADI_MM_MATNR
    BADI_MM_MATNR
    CDT_CHECK_MATERIAL
    MG_MASS_NEWSEG
    MG_MASS_NEWSEG
    WRF_DISCONT_FACT_E
    Note: This is for transaction code MM01, MM02 & MM03.
    Regards,
    Saravanan M

  • To find out appropriate user exit/ badi for transaction VT01n

    Hi,
       I have the following requirement.
    Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document.  The rules for populating the value (SO, ST, PO and RA) are as follows:
    If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
    If all of the orders are STO orders, then the Cass shipment type should be "ST",
    If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
    If all of the orders are customer return orders, then the Cass shipment type should be "RA".
    I have to find out proper user exit / badi to do this.I have tried with many userexit but it won't work.
       Thanking in advance to give your suggestion in order to resolve it.
    With regards,
    Ajit.

    Hi this code will enable you to find the user exit for any transaction . Just give the transaction as input
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    Just for your information the User exits available for VT01n are
    MV56AINI            Initialization of transaction control for transportation          
    V56AFCCH            Shipment processing: Check function code allowed                  
    V56AGTAR            User Exit for Filtering Shipping Unit Calculation                 
    V56ARCHV            Customer-spec. checks for archiving shipments                     
    V56ATKTX            Change the number of lines for text input in shipment             
    V56BMOD             Transportation processing: Field modification                     
    V56DISTZ            Shipment Processing: Determine Distance                           
    V56FCOPY            Shipment processing: Copy delivery data                           
    V56FSTAT            Shipment processing: Activities when setting a status             
    V56L0001            Status of Shipments for a Delivery                                
    V56LDELI            Read Delivery Data for Shipment Processing                        
    V56LOCID            Shipment Processing: Determine Location Identification            
    V56MVT04            Extensions for Collective Processing of Shipments                 
    V56SLDET            Shipment processing: Leg determination                            
    V56TDLIF            Filter Delivery Items for Shipment                                
    V56UCHCH            Shipment processing: Check whether changes were made              
    V56UCHCO            Check shipments are complete                                      
    V56UDLUP            Obsolete as of 4.6C: Delivery Update on Delivery Routines         
    V56UNUMB            Shipment number allocation                                        
    V56USTAT            User-individual definition of transportation planning status      
    V56USVDO            Update new objects for transport                                  
    V56USVDP            Preparation for updating new objects for transport?               
    Award points if helpful..
    Thanks

  • To find out user exit/ badi for the VT01n transaction triggered in Save

    Hi Friends,
              I have the following requirement and for this appropriate user exit/ badi should be needed which will trigger during saving of the shipment.
    Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document.  The rules for populating the value (SO, ST, PO and RA) are as follows:
    If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
    If all of the orders are STO orders, then the Cass shipment type should be "ST",
    If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
    If all of the orders are customer return orders, then the Cass shipment type should be "RA".
    I have tried with the 3 badi available and 7 to 8 user exit, but it won't work.
    Thanking a lot in advance for giving the solution.
    With Regards,
    Ajit.

    Hi,
    This code will give you all the user-exits.
    Code:
    & Report ZPJA_PM002 (Ver4) &
    & PJA Consultancy Services (www.pjas.com) &
    & This report attmpts to find Enhancements, Program-Exits, BADIs &
    & and Business Transaction Events in a particular program/tcode. &
    & Other search options: &
    & Program: RPR_ABAP_SOURCE_SCAN &
    & FModule: &
    & Text Elements: &
    & P_DEVC Show user-exits from development class &
    & P_LIMIT Limit submit program selection &
    & P_FUNC Show function modules &
    & P_SUBM Show submit programs &
    & S01 Selection data (TCode takes precedence over program name) &
    report zpja_pm002
    no standard page heading
    line-size 221.
    data: tabix like sy-tabix,
    w_linnum type i,
    w_off type i,
    w_index like sy-tabix,
    w_include like trdir-name,
    w_prog like trdir-name,
    w_incl like trdir-name,
    w_area like rs38l-area,
    w_level,
    w_fsel like sy-ucomm, " Determination of screen field
    w_str(50) type c,
    w_funcname like tfdir-funcname.
    constants: c_fmod(40) type c value 'Function modules selected: ',
    c_subm(40) type c value 'Submit programs selected: ',
    c_col1(12) type c value 'Enhanmt Type',
    c_col2(40) type c value 'Enhancement',
    c_col3(30) type c value 'Program/Include',
    c_col4(20) type c value 'Enhancement Name',
    c_col5(40) type c value 'Enhancement Description',
    c_col6(8) type c value 'Project',
    c_col7(1) type c value 'S',
    c_col8(12) type c value 'ChangeName',
    c_col9(10) type c value 'ChangeDate'.
    Work Areas: ABAP Workbench
    data: begin of wa_d010inc.
    data: master type d010inc-master.
    data: end of wa_d010inc.
    data: begin of wa_tfdir.
    data: funcname type tfdir-funcname,
    pname type tfdir-pname,
    include type tfdir-include.
    data: end of wa_tfdir.
    data: begin of wa_tadir.
    data: devclass type tadir-devclass.
    data: end of wa_tadir.
    data: begin of wa_tstc.
    data: pgmna type tstc-pgmna.
    data: end of wa_tstc.
    data: begin of wa_tstcp.
    data: param type tstcp-param.
    data: end of wa_tstcp.
    data: begin of wa_enlfdir.
    data: area type enlfdir-area.
    data: end of wa_enlfdir.
    Work Areas: BADIs
    data: begin of wa_sxs_attr.
    data: exit_name type sxs_attr-exit_name.
    data: end of wa_sxs_attr.
    data: begin of wa_sxs_attrt.
    data: text type sxs_attrt-text.
    data: end of wa_sxs_attrt.
    Work Areas: Enhancements
    data: begin of wa_modsap.
    data: member type modsap-member.
    data: end of wa_modsap.
    data: begin of wa_modsapa.
    data: name type modsapa-name.
    data: end of wa_modsapa.
    data: begin of wa_modsapt.
    data: modtext type modsapt-modtext.
    data: end of wa_modsapt.
    Work Areas: Business Transaction Events
    data: begin of wa_tbe01t.
    data: text1 type tbe01t-text1.
    data: end of wa_tbe01t.
    data: begin of wa_tps01t.
    data: text1 type tps01t-text1.
    data: end of wa_tps01t.
    user-exits
    types: begin of ty_mod,
    member like modact-member,
    name like modact-name,
    status like modattr-status,
    anam like modattr-anam,
    adat like modattr-adat,
    end of ty_mod.
    data: w_mod type ty_mod.
    types: begin of t_userexit,
    type(12) type c,
    pname like trdir-name,
    txt(300),
    level type c,
    modname(30) type c,
    modtext(60) type c,
    modattr type ty_mod,
    end of t_userexit.
    data: i_userexit type standard table of t_userexit with header line.
    Function module developmnet classes
    types: begin of t_devclass,
    clas like trdir-clas,
    end of t_devclass.
    data: i_devclass type standard table of t_devclass with header line.
    types: begin of t_enlfdir,
    area type enlfdir-area,
    end of t_enlfdir.
    data: i_enlfdir type standard table of t_enlfdir with header line.
    Submit programs
    types: begin of t_submit,
    pname like trdir-name,
    level,
    done,
    end of t_submit.
    data: i_submit type standard table of t_submit with header line.
    Source code
    types: begin of t_sourcetab, "#EC * (SLIN lügt!)
    line(200), "#EC * (SLIN lügt!)
    end of t_sourcetab. "#EC * (SLIN lügt!)
    data: sourcetab type standard table of t_sourcetab with header line.
    data c_overflow(30000) type c.
    Description of an ABAP/4 source analysis token
    data: i_stoken type standard table of stokex with header line.
    data wa_stoken like i_stoken.
    Description of an ABAP/4 source analysis statement
    data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
    keywords for searching ABAP code
    types: begin of t_keywords,
    word(30),
    end of t_keywords.
    data: keywords type standard table of t_keywords with header line.
    function modules within program
    types: begin of t_fmodule,
    name like rs38l-name,
    pname like trdir-name,
    pname2 like trdir-name,
    level,
    bapi,
    done,
    end of t_fmodule.
    data: i_fmodule type standard table of t_fmodule with header line.
    & Selection Options &
    selection-screen begin of block selscr1 with frame title text-s01.
    parameter: p_pname like trdir-name memory id rid,
    p_tcode like syst-tcode,
    p_limit(4) type n default 100,
    p_devc like rihea-dy_ofn default ' ',
    p_func like rihea-dy_ofn default ' ',
    p_subm like rihea-dy_ofn default ' '.
    selection-screen end of block selscr1.
    & START-OF-SELECTION &
    start-of-selection.
    if p_pname is initial and p_tcode is initial.
    message e008(hrfpm). "Make entry on the selection screen
    stop.
    endif.
    ensure P_LIMIT is not zero.
    if p_limit = 0.
    p_limit = 1.
    endif.
    perform data_select.
    perform get_submit_data.
    perform get_fm_data.
    perform get_additional_data.
    perform data_display.
    & Form DATA_SELECT &
    form data_select.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get programs/includes' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    determine search words
    keywords-word = 'CALL'.
    append keywords.
    keywords-word = 'FORM'.
    append keywords.
    keywords-word = 'PERFORM'.
    append keywords.
    keywords-word = 'SUBMIT'.
    append keywords.
    keywords-word = 'INCLUDE'.
    append keywords.
    if not p_tcode is initial.
    get program name from TCode
    select single pgmna from tstc into wa_tstc-pgmna
    where tcode eq p_tcode.
    if not wa_tstc-pgmna is initial.
    p_pname = wa_tstc-pgmna.
    TCode does not include program name, but does have refereve TCode
    else.
    select single param from tstcp into wa_tstcp-param
    where tcode eq p_tcode.
    if sy-subrc = 0.
    check wa_tstcp-param(1) = '/'.
    check wa_tstcp-param+1(1) = '*'.
    if wa_tstcp-param ca ' '.
    endif.
    w_off = sy-fdpos + 1.
    subtract 2 from sy-fdpos.
    if sy-fdpos gt 0.
    p_tcode = wa_tstcp-param+2(sy-fdpos).
    endif.
    select single pgmna from tstc into wa_tstc-pgmna
    where tcode eq p_tcode.
    p_pname = wa_tstc-pgmna.
    if sy-subrc <> 0.
    message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
    endif.
    else.
    message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
    endif.
    endif.
    endif.
    Call customer-function aus Program coding
    read report p_pname into sourcetab.
    if sy-subrc > 0.
    message e017(enhancement) with p_pname raising no_program."#EC *
    endif.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    overflow into c_overflow
    with includes.
    if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
    message e130(enhancement) raising syntax_error. "#EC *
    endif.
    check I_STOKEN for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_level = '0'.
    w_prog = ''.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endform. "DATA_SELECT
    & Form GET_FM_DATA &
    form get_fm_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get function module data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure. "#EC *
    Function module data
    sort i_fmodule by name.
    delete adjacent duplicates from i_fmodule comparing name.
    loop at i_fmodule where done ne 'X'.
    clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
    refresh: i_stoken, i_sstmnt, sourcetab.
    store function groups
    select single area from enlfdir into wa_enlfdir-area
    where funcname = i_fmodule-name.
    i_enlfdir-area = wa_enlfdir-area.
    append i_enlfdir.
    Store development classes
    if not wa_enlfdir-area is initial.
    select single devclass into wa_tadir-devclass
    from tadir where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = wa_enlfdir-area.
    check not wa_tadir-devclass is initial.
    move wa_tadir-devclass to i_devclass-clas.
    append i_devclass.
    endif.
    clear wa_tfdir.
    select single funcname pname include from tfdir into wa_tfdir
    where funcname = i_fmodule-name.
    check sy-subrc = 0.
    call function 'FUNCTION_INCLUDE_SPLIT'
    exporting
    program = wa_tfdir-pname
    importing
    group = w_area.
    concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
    i_fmodule-pname = w_include.
    i_fmodule-pname2 = wa_tfdir-pname.
    modify i_fmodule.
    read report i_fmodule-pname into sourcetab.
    if sy-subrc = 0.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    with includes.
    if sy-subrc > 0.
    message e130(enhancement) raising syntax_error.
    endif.
    check i_stoken for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_level = '1'.
    w_prog = i_fmodule-pname2.
    w_incl = i_fmodule-pname.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endif.
    endloop.
    sort funtion groups
    sort i_devclass.
    delete adjacent duplicates from i_devclass.
    sort i_enlfdir.
    delete adjacent duplicates from i_enlfdir.
    endform. "GET_FM_DATA
    & Form GET_SUBMIT_DATA &
    form get_submit_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get submit data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    sort i_submit.
    delete adjacent duplicates from i_submit comparing pname.
    w_level = '0'.
    loop at i_submit where done ne 'X'.
    check i_submit-pname ne p_pname. " ensure not the same as origianl program
    clear: i_stoken, i_sstmnt, sourcetab.
    refresh: i_stoken, i_sstmnt, sourcetab.
    read report i_submit-pname into sourcetab.
    if sy-subrc <> 0.
    delete i_submit.
    continue.
    else.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    with includes.
    if sy-subrc > 0.
    continue.
    endif.
    check i_stoken for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_prog = i_submit-pname.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endif.
    restrict number of submit program selected for processing
    describe table i_submit lines w_linnum.
    if w_linnum ge p_limit.
    w_level = '1'.
    endif.
    i_submit-done = 'X'.
    modify i_submit.
    endloop.
    sort i_submit.
    delete adjacent duplicates from i_submit comparing pname.
    endform. "GET_SUBMIT_DATA
    & Form DATA_SEARCH &
    form data_search tables p_stoken structure stoken
    using p_level p_prog p_incl.
    loop at p_stoken.
    clear i_userexit.
    tabix = sy-tabix + 1.
    i_userexit-level = p_level.
    if i_userexit-level = '0'.
    if p_incl is initial.
    i_userexit-pname = p_pname.
    else.
    concatenate p_pname '/' p_incl into i_userexit-pname.
    endif.
    else.
    if p_incl is initial.
    i_userexit-pname = p_prog.
    else.
    concatenate p_prog '/' p_incl into i_userexit-pname.
    endif.
    endif.
    Include
    if p_stoken-str eq 'INCLUDE'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    check not wa_stoken-str cs 'STRUCTURE'.
    check not wa_stoken-str cs 'SYMBOL'.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    i_submit-level = p_level.
    append i_submit.
    endif.
    endif.
    Enhancements
    if p_stoken-str eq 'CUSTOMER-FUNCTION'.
    clear w_funcname.
    read table p_stoken index tabix.
    translate p_stoken-str using ''' '.
    condense p_stoken-str.
    if p_prog is initial.
    concatenate 'EXIT' p_pname p_stoken-str into w_funcname
    separated by '_'.
    else.
    concatenate 'EXIT' p_prog p_stoken-str into w_funcname
    separated by '_'.
    endif.
    select single member from modsap into wa_modsap-member
    where member = w_funcname.
    if sy-subrc = 0. " check for valid enhancement
    i_userexit-type = 'Enhancement'.
    i_userexit-txt = w_funcname.
    append i_userexit.
    else.
    clear wa_d010inc.
    select single master into wa_d010inc-master
    from d010inc
    where include = p_prog.
    concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
    separated by '_'.
    i_userexit-type = 'Enhancement'.
    i_userexit-txt = w_funcname.
    endif.
    endif.
    BADIs
    if p_stoken-str cs 'cl_exithandler='.
    w_index = sy-tabix + 4.
    read table p_stoken index w_index into wa_stoken.
    i_userexit-txt = wa_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    i_userexit-type = 'BADI'.
    append i_userexit.
    endif.
    Business transaction events
    if p_stoken-str cs 'OPEN_FI_PERFORM'.
    i_userexit-type = 'BusTrEvent'.
    i_userexit-txt = p_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    i_userexit-modname = i_userexit-txt+16(8).
    case i_userexit-txt+25(1).
    when 'E'.
    clear wa_tbe01t.
    select single text1 into wa_tbe01t-text1 from tbe01t
    where event = i_userexit-txt+16(8)
    and spras = sy-langu.
    if wa_tbe01t-text1 is initial.
    i_userexit-modtext = ''. "#EC NOTEXT
    else.
    i_userexit-modtext = wa_tbe01t-text1.
    endif.
    i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
    when 'P'.
    clear wa_tps01t.
    select single text1 into wa_tps01t-text1 from tps01t
    where procs = i_userexit-txt+16(8)
    and spras = sy-langu.
    i_userexit-modtext = wa_tps01t-text1.
    i_userexit-modname+8 = '/Process'.
    endcase.
    append i_userexit.
    endif.
    Program exits
    if p_stoken-str cs 'USEREXIT_'.
    i_userexit-type = 'Program Exit'.
    i_userexit-txt = p_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    append i_userexit.
    endif.
    Submit programs
    if p_stoken-str cs 'SUBMIT'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
    replace all occurrences of '''' in wa_stoken-str with space.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    i_submit-level = p_level.
    append i_submit.
    endif.
    endif.
    Perform routines (which reference external programs)
    if p_stoken-str cs 'PERFORM'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    if not wa_stoken-ovfl is initial.
    w_off = wa_stoken-off1 + 10.
    w_str = c_overflow+w_off(30).
    find ')' in w_str match offset w_off.
    w_off = w_off + 1.
    wa_stoken-str = w_str(w_off).
    endif.
    check wa_stoken-str cs '('.
    w_off = 0.
    while sy-subrc = 0.
    if wa_stoken-str+w_off(1) eq '('.
    replace section offset w_off length 1 of wa_stoken-str with ''.
    replace all occurrences of ')' in wa_stoken-str with space.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    append i_submit.
    endif.
    exit.
    else.
    replace section offset w_off length 1 of wa_stoken-str with ''.
    shift wa_stoken-str left deleting leading space.
    endif.
    endwhile.
    endif.
    Function modules
    if p_stoken-str cs 'FUNCTION'.
    clear i_fmodule.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    if wa_stoken-str cs 'WF_'.
    if wa_stoken-str cs 'IDOC'.
    break-point.
    endif.
    if wa_stoken-str cs 'BAPI'.
    i_fmodule-bapi = 'X'.
    endif.
    replace first occurrence of '''' in wa_stoken-str with space.
    replace first occurrence of '''' in wa_stoken-str with space.
    if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
    clear wa_tfdir.
    concatenate wa_stoken-str '%' into wa_stoken-str.
    select single funcname into wa_tfdir-funcname from tfdir
    where funcname like wa_stoken-str.
    if sy-subrc = 0.
    i_fmodule-name = wa_tfdir-funcname.
    else.
    continue.
    endif.
    else.
    i_fmodule-name = wa_stoken-str.
    endif.
    read table i_fmodule with key name = i_fmodule-name.
    if sy-subrc <> 0.
    i_fmodule-level = p_level.
    append i_fmodule.
    endif.
    endif.
    endloop.
    endform. "DATA_SEARCH
    & Form GET_ADDITIONAL_DATA &
    form get_additional_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get additional data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    loop at i_userexit.
    Enhancement data
    if i_userexit-type cs 'Enh'.
    clear: wa_modsapa.
    select single name into wa_modsapa-name from modsap
    where member = i_userexit-txt.
    check sy-subrc = 0.
    i_userexit-modname = wa_modsapa-name.
    clear wa_modsapt.
    select single modtext into wa_modsapt-modtext from modsapt
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    i_userexit-modtext = wa_modsapt-modtext.
    MOH - enhancement to get the project name
    clear w_mod.
    select single modactmember modactname modattr~status
    modattranam modattradat
    into w_mod
    from modact
    inner join modattr
    on modattrname = modactname
    where modact~member = wa_modsapa-name
    and modact~typ = space.
    i_userexit-modattr = w_mod.
    MOH - eoe
    endif.
    BADI data
    if i_userexit-type eq 'BADI'.
    clear wa_sxs_attr.
    select single exit_name into wa_sxs_attr-exit_name from sxs_attr
    where exit_name = i_userexit-txt.
    if sy-subrc = 0.
    i_userexit-modname = i_userexit-txt.
    else.
    i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
    endif.
    clear wa_sxs_attrt.
    select single text into wa_sxs_attrt-text from sxs_attrt
    where exit_name = wa_sxs_attr-exit_name
    and sprsl = sy-langu.
    i_userexit-modtext = wa_sxs_attrt-text.
    endif.
    modify i_userexit.
    endloop.
    get enhancements via program package
    clear wa_tadir.
    select single devclass into wa_tadir-devclass from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = p_pname.
    if sy-subrc = 0.
    clear: wa_modsapa, wa_modsapt.
    select name from modsapa into wa_modsapa-name
    where devclass = wa_tadir-devclass.
    select single modtext from modsapt into wa_modsapt-modtext
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    read table i_userexit with key modname = wa_modsapa-name.
    if sy-subrc <> 0.
    i_userexit-modtext = wa_modsapt-modtext.
    i_userexit-type = 'Enhancement'. "#EC NOTEXT
    i_userexit-modname = wa_modsapa-name.
    i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
    i_userexit-pname = 'Unknown'. "#EC NOTEXT
    append i_userexit.
    endif.
    endselect.
    endif.
    Get IDOCs
    loop at i_devclass.
    endloop.
    endform. "GET_ADDITIONAL_DATA
    & Form DATA_DISPLAY &
    form data_display.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Prepare screen for display' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    sort i_userexit by type txt modname.
    delete adjacent duplicates from i_userexit comparing txt modname.
    format headings
    write: 'Enhancements from main program'. "#EC NOTEXT
    write: /.
    uline.
    format color col_heading.
    write: / sy-vline,
    (12) c_col1, "Enhanmt Type
    sy-vline,
    (40) c_col2, "Enhancement
    sy-vline,
    (30) c_col3, "Program/Include
    sy-vline,
    (20) c_col4, "Enhancement name
    sy-vline,
    (60) c_col5, "Enhancement description
    sy-vline,
    (8) c_col6, "Project
    sy-vline,
    (1) c_col7, "S
    sy-vline,
    (12) c_col8, "ChangeName
    sy-vline,
    (10) c_col9, "ChangeDate
    sy-vline.
    format reset.
    uline.
    format lines
    loop at i_userexit.
    set line colour
    case i_userexit-type.
    when 'Enhancement'.
    format color 3 intensified off.
    when 'BADI'.
    format color 4 intensified off.
    when 'BusTrEvent'.
    format color 5 intensified off.
    when 'Program Exit'.
    format color 6 intensified off.
    when others.
    format reset.
    endcase.
    write: / sy-vline,
    i_userexit-type,
    sy-vline,
    i_userexit-txt(40),
    sy-vline,
    i_userexit-pname(30),
    sy-vline,
    i_userexit-modname(20),
    sy-vline,
    i_userexit-modtext(60),
    sy-vline,
    i_userexit-modattr-name,
    sy-vline,
    i_userexit-modattr-status,
    sy-vline,
    i_userexit-modattr-anam,
    sy-vline,
    i_userexit-modattr-adat no-zero,
    sy-vline.
    hide: i_userexit-type,
    i_userexit-txt,
    i_userexit-pname,
    i_userexit-modname,
    i_userexit-modtext.
    endloop.
    format reset.
    uline.
    user-exits from development class of function modules
    if p_devc = 'X'.
    write: /.
    write: / 'User-exits from function module development class'."#EC NOTEXT
    write: 157''.
    uline (90).
    write: 157''.
    loop at i_devclass.
    clear wa_modsapa.
    select name from modsapa into wa_modsapa
    where devclass = i_devclass-clas.
    select single name modtext into corresponding fields of wa_modsapt
    from modsapt
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    format color 3 intensified off.
    write: / sy-vline,
    (12) 'Enhancement',
    sy-vline,
    wa_modsapa-name,
    sy-vline,
    wa_modsapt-modtext,
    sy-vline.
    endselect.
    endloop.
    uline (90).
    format reset.
    endif.
    describe table i_fmodule lines w_linnum.
    write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
    write: 157''.
    if p_func = 'X'.
    display fuction modules used in program
    uline (38).
    write: 157''.
    loop at i_fmodule.
    write: sy-vline,
    i_fmodule-name,
    sy-vline,
    i_fmodule-bapi,
    sy-vline.
    write: 157''.
    endloop.
    uline (38).
    write: 157''.
    endif.
    describe table i_submit lines w_linnum.
    write: / c_subm , at 35 w_linnum. "#EC NOTEXT
    write: 157''.
    if p_subm = 'X'.
    display submit programs used in program
    uline (44).
    write: 157''.
    loop at i_submit.
    write: sy-vline,
    i_submit-pname,
    sy-vline.
    write: 157''.
    endloop.
    uline (44).
    endif.
    issue message with number of user-exits displayed
    describe table i_userexit lines w_linnum.
    message s697(56) with w_linnum.
    endform. "DATA_DISPLAY
    & User Selection Processing &
    at line-selection.
    get cursor field w_fsel.
    case w_fsel.
    when 'I_USEREXIT-MODNAME'.
    case i_userexit-type.
    when 'Enhancement'.
    set parameter id 'MON' field i_userexit-modname.
    call transaction 'SMOD' and skip first screen.
    when 'BADI'.
    check i_userexit-modname ne 'Dynamic call'.
    set parameter id 'EXN' field i_userexit-modname.
    call transaction 'SE18' and skip first screen.
    when 'BusTrEvent'.
    submit rfopfi00 with attr_typey_selm = 'A'
    with event = i_userexit-modname(8)
    via selection-screen
    and return.
    when others.
    endcase.
    when 'I_USEREXIT-PNAME'.
    check i_userexit-modname ne 'Unknown'.
    w_off = 0.
    find '/' in i_userexit-pname match offset w_off.
    if w_off = 0.
    set parameter id 'RID' field i_userexit-pname.
    call transaction 'SE38' and skip first screen.
    else.
    w_off = w_off + 1.
    w_prog = i_userexit-pname+w_off.
    set parameter id 'RID' field w_prog.
    call transaction 'SE38' and skip first screen.
    endif.
    when others.
    endcase.
    Feel free to revert back.
    --Ragu

  • Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)

    Hi all,
    i am facing problem finding enhancement when creation of sales order of Valuation price with user exit/BADI/Enhancement Spot  (In valuation variant)
    For refferenece:
    When going to t.code VA03, select one item and go to extras in the menu bar and select costing then you find some amounts calculation i.e valuation price automatically.
    So when creation of sales order i am giving material and that material price automatically takes from material master and creating sales order.
    My customer requirement is to get the valuation price of the input material from Z-table during the sales order cost estimate.
    This Z-table contains the material code, plant , grade  of the material.
    Ex:
    Material         Plant   Grade Price
    A                1000    XYZ     25000
    A                1000    PQR     35000
    A                1000    BCD     45000
    Suppose it depends on sales document type and which grade price i have to take.
    So first of all i am unable to find enhancement where to change this code to get change the valuation price.
    Does anybody have any idea , is there any user exit/BADI/enhancement for this.
    So please help me in this issue.
    Thanks & Regards,
    lokeshgoud

    pls allow me to post the questions

  • User exit/Badi in MIGO after save

    hi all
    I am trying to find a user-exit/BAdi in tcode MIGO.
    This one should be called after saving the MIGO document.
    Using this i want to put control over auto TO creation for some specific plants and storage locations.
    Important thing is I am using version 4.6C.

    Hi,
    Please try the last one. This may suit.
    For "Automatic TO creation (background processing)", the following user exits are available:
    MWMTOAU1 Selection of requirements for automatic creation of orders.
    MWMTOAU2 Reference number assignment.
    MWMTOAU3 Selection of posting change notices for automatic creation of transfer orders.
    Thanks and Regards
    Guru

  • User exit / BADI to add the condition type in PO

    Hi Friends,
    The scenario is like user will be creating the Sales order & after that user will create the PR & immidiately after that PO will be created from PR no.
    I will be checking for some Z* condition type in sales order & if its present in sales order I have to add that condition type in PO.
    So for this I am searching for user exit or BADI.
    Please help me out with this.
    I have already tried following user exits & bADIs
    1. RV61AFZA - cant use because i dont get the PR no or SO no in this exit.
    2. RV61AFZB - cant use because i dont get the PR no or SO no in this exit.
    3. also tried the enhancement MM06E004 - if I add new condition type in XKOMV table condition type is not getting updated in PO.
    4. MM06E005 - if I add new condition type in XKOMV table condition type is not getting updated in PO.
    5. ME_PURCHDOC_POSTED - this BADI dont allow us to add the new condition type to std internal table.
    If you know anything apart from this then please do let me know.
    Full points will be awarded for the correct answer!!
    Best Regards,
    Aditya
    Edited by: aditya aghor on May 26, 2008 8:59 AM
    Edited by: aditya aghor on May 26, 2008 10:33 AM

    Transaction Code - MIRO                     Enter Invoice                                                                               
    Exit Name           Description                                                                               
    LMR1M001            User exits in Logistics Invoice Verification                   
    LMR1M002            Account grouping for GR/IR account maintenance                 
    LMR1M003            Number assignment in Logistics Invoice Verification            
    LMR1M004            Logistics Invoice Verification: item text for follow-on docs   
    LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting   
    LMR1M006            Logistics Invoice Verification: Process XML Invoice            
    MRMH0001            Logistics Invoice Verification: ERS procedure                  
    MRMH0002            Logistics Invoice Verification: EDI inbound                    
    MRMH0003            Logistics Invoice Verification: Revaluation/RAP                
    MRMN0001            Message output and creation: Logistics Invoice Verification    
    kevin

  • User exit/BADI in MIRO that would trigger invoice quantity block.

    Hi,
    Is there a way to enchance MIRO so that an invoice quantity block will be set automatically through user exit/BADI?
    My requirement is that if an invoice is to be posted onto a PO line using an IO, the invoice needs to be processed onto the PO line up to the total of the PO line. And if the invoice goes above the PO line and there is still some budget on the IO, the invoice should get a quantity block.
    Also, the quantity block should be set before posting the invoice.
    Thanks.

    Hi,
    Exit Name           Description
    LMR1M001            User exits in Logistics Invoice Verification
    LMR1M002            Account grouping for GR/IR account maintenance
    LMR1M003            Number assignment in Logistics Invoice Verification
    LMR1M004            Logistics Invoice Verification: item text for follow-on docs
    LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
    LMR1M006            Logistics Invoice Verification: Process XML Invoice
    MRMH0001            Logistics Invoice Verification: ERS procedure
    MRMH0002            Logistics Invoice Verification: EDI inbound
    MRMH0003            Logistics Invoice Verification: Revaluation/RAP
    MRMN0001            Message output and creation: Logistics Invoice Verification
    Badi Name            Description
    INVOICE_UPDATE       Business Add-In: Logistics Invoice Verification
    INVOICE_UPDATE       Transfer Invoice Receipt to Records Management
    INVOICE_UPDATE       Event manager communication from invoice processing
    INVOICE_UPDATE       Rückantwort ins CRM aus der Lieferantenrechnung
    INVOICE_UPDATE       Implementierung, um S1NVEXC zu übermitteln
    INVOICE_UPDATE       Save FI Document Type for Principle of Prudence
    INVOICE_UPDATE       Vendor Evaluation Based on Documents from IV
    Check this badi's and user exits.
    Hope this helps.
    Regards,
    Qamar.

  • How to find User Exit / Badi

    Hi All
    My requirement is to search the User Exit / Badi / any other enhancement, which is used in a standard transaction. For example:- I know that there is some Exit / badi used in transaction VA01, now how can I search for these exit / BADI which is applied in the transaction VA01.
    Pl. do not suggest me to take the help of ABAP, since I want to search it myself. Any help will be highly appreciated.
    Thanks and regards
    AA

    Hi,
    I hope this will help you.
    for sales order creation VA01  program SAPMV45A, u can find out by starting the transaction VA01 and put /h (debugging mode on) then
    from the various buttons on top of the screen like Fields, table, breakpoints, watchpoints, calls, overview and settings.
    from above click on overview button, then it will show you all the userexits under this programs used.
    like Program -
    block -
    name
    SAPMV45A    program      SAPMV45A
    MV45AFZA     form           USEREXIT_MOVE_FIELD_TO_KOMKD
    Mahesh

Maybe you are looking for

  • Reset specific fields in a form

    I have used this feature in the past without issue, but today when I setup a Reset Form button, I do not have any of my fields listed, so I am unable to select the fields I wish to clear. I can setup the button and it clears all fields, but I do not

  • Number formatting issue in Web intelligence report

    Folks , I've an object called ' Serial number' (12 digits long) but when I set this in query filter as a prompt number format gets changed. Similar like this:   whereas I am expecting to see 123456789123 something like this. I made sure that object d

  • IPod won't connect to computer or charge from computer.

    Okay, so, I plugged in my iPod touch (4th generation) to my computer and nothing happens. Literally, nothing. It wont charge and it wont even install any data or anything. Its not the USB cord because I plug it into my wall charger and it charges. I

  • How to send a mail with HTML body from Oracle

    Hi Team, Can somebody guide me how to send a mail with HTML body from oracle. Here is the piece of code i am trying to send a mail. procedure SEND_MAIL is cursor c_1 is select * from table_name; l_mail_id varchar2(40); -- ls_mailhost VARCHAR2(64) :=

  • How contact apple to get the ip white listed ?

    Hi everyone, I'am from France and I need to create a hundred account for Itunes, with the Itunes limit i can't create more than 10 accounts ?? I contact Itunes Support but i don't get any answer ! So i ask to the communities how to contact apple to g