User exit, badi or enhancement to validate data before saving for qm02

Hi,
Currently, I have a requirement to validate the data of a notification before saving data in Tcode qm02.
I have found an user exit to check data for tcode qm02. It works for task tab, I mean I can get the data under task tab of qm02 and do the validation. However, for the tab processing: I want to validate the partner name before saving but I can not get the list of partners which is in Processing tab.
Please let me know if you could show me the user exit, enhancement, or Badi so that I can validate the data under processing tab in qm02.
Thanks in advance,
Hung To

Hi Keshav.T,
Currently I am using this exit to validate data for the tab "Task". However, for the tab "Processing" I can not get the data, let say Partner, to validate.
Thanks,
Hung To

Similar Messages

Please send material or good lionk on USER-EXIT,BADI and ENHANCEMENT

Hi All,
Please send some step by step material or good lionk on USER-EXIT,BADI and ENHANCEMENT which will be usefull for beginners like me.
Thanks in advance
Srikanta

Hi Srikanta,
Please see the SDN page for ABAP Enhancements and Modifications:
https://www.sdn.sap.com/irj/sdn/abap?rid=/webcontent/uuid/109f5161-ee76-2910-cb99-db10b559ef4b [original link is broken]
Cheers,
Ville

User Exits/BADI's in HR Mater Data PA30

Hi,
Hi,
When ever the Personnel's Qualification is Updated in PA30, I need to capture the Information and store it in a Custom Table to keep track of the change history information to create a report with micro level information like Qualification, Task, Coupon, Status (Pass/Fail), Qualified By, Changed By, Start Date, End Date Etc. The SAP Standard Infotype Extends the Qualification End Date when the personnel passed the qualification and maintains always One start date (Very Beginning Date) and One End Date. The Requirement is to capture the Qualification Information, Each time the Personnel goes through the Examination and Store the History for Future Reporting. Can any one please suggest me some possible solutions for this requirement.
Appreciate Your Help.
Thanks,
Kannan

Hi Kiran,
Thanks a lot for your reply. I checked those Exits/Badi's and none of them has the Proficiency in the Import Parameters. Actually I need to build validation logic inside the Exit/Badi, so that the custom table updates logic should work only for the Proficiency 0001.Do u have any Suggestions? Please let me know.
Appreciate your Help.
Thanks,
Kannan.

When comparing the EXits BADIs and Enhancement points .

Hi All,
Could you please let me know the upward compatibiltity of the User-exits BADI and Enhancement points?
In case of version upgrade how do these efffect?
Please give me some details......
Thanks in Advance.
Regards
Abhilash.

hi Gautham/All,
Thanks for the update.
Can u be more elaborate on this.
In the upgraded versions we can not do for enhancement spots
and BADIs because they will be having upward compatability.
Only user exits and customer exits are not having the upward compatibility. so we have to write the code manually in the new version.
This is as per my understanding.
Please correct me if I am wrong?
Thanks in advance.
Regards
Abhilash.

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

User Exit/ BADI to validate input in LT06

Dear Gurus,
I would like to ask what user exit/BADI i could use to validate or check the input value before creating the material document in LT06?
I have tried MWMTO001 and put break point inside FM EXIT_SAPLL03T_001, but the break point is not called.
Thanks a lot.

Hi Shirley,
If you get the proper place where you need to add your code then best option is, you can findout implicit enhancement for this and add your code in inside implicit part.
every screen having PBO and PAI part , you can try to add your code in PAI part.
Note: for this BAdI definition WM_ENHANCMENT implementation, need to sap access key and remove tick from BADI definition but I don't think this is right option.
Regards,
Prasenjit

Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)

Hi all,
i am facing problem finding enhancement when creation of sales order of Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)
For refferenece:
When going to t.code VA03, select one item and go to extras in the menu bar and select costing then you find some amounts calculation i.e valuation price automatically.
So when creation of sales order i am giving material and that material price automatically takes from material master and creating sales order.
My customer requirement is to get the valuation price of the input material from Z-table during the sales order cost estimate.
This Z-table contains the material code, plant , grade of the material.
Ex:
Material         Plant   Grade Price
A                1000    XYZ     25000
A                1000    PQR     35000
A                1000    BCD     45000
Suppose it depends on sales document type and which grade price i have to take.
So first of all i am unable to find enhancement where to change this code to get change the valuation price.
Does anybody have any idea , is there any user exit/BADI/enhancement for this.
So please help me in this issue.
Thanks & Regards,
lokeshgoud

pls allow me to post the questions

User Exit/BADI/Enhancement Point in VF01 after generating new billingdocno.

Hi Experts,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 after generating the new document no (Billing document no assign). The Billing document no is generating in the FM RV_INVOICE_DOCUMENT_ADD ( NUMBER_GET_NEXT).
Now the Billing document no is generating like '0000152', i want to concatenate 'ECR' to the generated Billing document no and it should be updated like ECR0000152 in Billing tables (VBRK, VBRP).
Kindly let me know is there any EXIT/BADI to achieve this functionality.
Regards,
Venu

Hi Venu,,
 These are the enhancements and badis for vf01, please check which will be helpful to you,,
<exit farm removed by moderator>
<points begging removed by moderator>
 Warm Regards
 Zulfikhar Ali
Edited by: Thomas Zloch on Oct 1, 2011 3:57 PM

User Exit/Badi to change the billing plan date when create sale order

Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh.

FD32 - Any User exit / BADI ?

Hi,
Can anyone help me out in finding any Enhancement(User Exit/BADI) for FD32 Transaction.
Regards,
Raja Sekhar

Hi
Use the prg to find userexit for any transaction you want.
*& Report Z_FIND_USEREXIT *
report z_find_userexit .
*NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Please reward.

User exit / BADI for training and event management

Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOI

Hi
BADI's for Training and Event Management
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY      Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST      Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ      Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING      HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW           HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT      Customer Enhancement: Name Format
RHPV0001 Customer      Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA      HR: Training and Event Management - Master Data
~~~Ganesh Kumar K.

To find out user exit/ badi for the VT01n transaction triggered in Save

Hi Friends,
I have the following requirement and for this appropriate user exit/ badi should be needed which will trigger during saving of the shipment.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have tried with the 3 badi available and 7 to 8 user exit, but it won't work.
Thanking a lot in advance for giving the solution.
With Regards,
Ajit.

Hi,
This code will give you all the user-exits.
Code:
& Report ZPJA_PM002 (Ver4) &
& PJA Consultancy Services (www.pjas.com) &
& This report attmpts to find Enhancements, Program-Exits, BADIs &
& and Business Transaction Events in a particular program/tcode. &
& Other search options: &
& Program: RPR_ABAP_SOURCE_SCAN &
& FModule: &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 221.
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_fsel like sy-ucomm, " Determination of screen field
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description',
c_col6(8) type c value 'Project',
c_col7(1) type c value 'S',
c_col8(12) type c value 'ChangeName',
c_col9(10) type c value 'ChangeDate'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of ty_mod,
member like modact-member,
name like modact-name,
status like modattr-status,
anam like modattr-anam,
adat like modattr-adat,
end of ty_mod.
data: w_mod type ty_mod.
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(60) type c,
modattr type ty_mod,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
types: begin of t_enlfdir,
area type enlfdir-area,
end of t_enlfdir.
data: i_enlfdir type standard table of t_enlfdir with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
store function groups
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
i_enlfdir-area = wa_enlfdir-area.
append i_enlfdir.
Store development classes
if not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
endif.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
sort funtion groups
sort i_devclass.
delete adjacent duplicates from i_devclass.
sort i_enlfdir.
delete adjacent duplicates from i_enlfdir.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
check i_submit-pname ne p_pname. " ensure not the same as origianl program
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc <> 0.
delete i_submit.
continue.
else.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''.
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''.
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IDOC'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
read table i_fmodule with key name = i_fmodule-name.
if sy-subrc <> 0.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
MOH - enhancement to get the project name
clear w_mod.
select single modactmember modactname modattr~status
modattranam modattradat
into w_mod
from modact
inner join modattr
on modattrname = modactname
where modact~member = wa_modsapa-name
and modact~typ = space.
i_userexit-modattr = w_mod.
MOH - eoe
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name = wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
Get IDOCs
loop at i_devclass.
endloop.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(60) c_col5, "Enhancement description
sy-vline,
(8) c_col6, "Project
sy-vline,
(1) c_col7, "S
sy-vline,
(12) c_col8, "ChangeName
sy-vline,
(10) c_col9, "ChangeDate
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(60),
sy-vline,
i_userexit-modattr-name,
sy-vline,
i_userexit-modattr-status,
sy-vline,
i_userexit-modattr-anam,
sy-vline,
i_userexit-modattr-adat no-zero,
sy-vline.
hide: i_userexit-type,
i_userexit-txt,
i_userexit-pname,
i_userexit-modname,
i_userexit-modtext.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
write: 157''.
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
& User Selection Processing &
at line-selection.
get cursor field w_fsel.
case w_fsel.
when 'I_USEREXIT-MODNAME'.
case i_userexit-type.
when 'Enhancement'.
set parameter id 'MON' field i_userexit-modname.
call transaction 'SMOD' and skip first screen.
when 'BADI'.
check i_userexit-modname ne 'Dynamic call'.
set parameter id 'EXN' field i_userexit-modname.
call transaction 'SE18' and skip first screen.
when 'BusTrEvent'.
submit rfopfi00 with attr_typey_selm = 'A'
with event = i_userexit-modname(8)
via selection-screen
and return.
when others.
endcase.
when 'I_USEREXIT-PNAME'.
check i_userexit-modname ne 'Unknown'.
w_off = 0.
find '/' in i_userexit-pname match offset w_off.
if w_off = 0.
set parameter id 'RID' field i_userexit-pname.
call transaction 'SE38' and skip first screen.
else.
w_off = w_off + 1.
w_prog = i_userexit-pname+w_off.
set parameter id 'RID' field w_prog.
call transaction 'SE38' and skip first screen.
endif.
when others.
endcase.
Feel free to revert back.
--Ragu

User-exit/BADI for version tab in ME22N

Dear Friends,
I have a requirement pertaining to user exit/BADI.
In ME22n in version tab when ever we change any data of PO the Version Completed check box should be checked.
Please let me know about the User Exit to be used and few lines of Pseudo code to proceed further.
Thanks,
Anshul

Dear Dave,
Check any enhancement Point is available to inlcude your logic in that place.
With Regards,
Selvan.M

User Exit/BADI for AS01 ( Asset Creation )

Hi Xperts,
My requirement is during asset creation in AS01, after asset generated i want to send asset no, subno, asset creation date, int. order no to ztable.
Can anyone suggest user exit/BADI which suit this requirement.
I have gone through forum search, but not found suitable object.
Ram.

Hi Ram,
Check out below Badi and Enhancement
BADI
IHSA_LIST_EDITING
ENHANCEMRNT
EXIT_SAPLAAPM_002
EXIT_SAPLAIST_001
EXIT_SAPLAIST_002
EXIT_SAPLAIST_003
THANKS & REGARDS
G.Vendhan
Edited by: vendhan g on Jul 24, 2009 12:33 PM

Different ways to find Customer exit, User Exit & Badi

Dear All,
What are the different ways by which we can find Customer Exit, User Exit & Badi for a given transaction code
Thanks
Ravindra suvarna

use this report u can find associate badi and user exit both for perticular transaction&----
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.

User exit, badi or enhancement to validate data before saving for qm02

Similar Messages

Maybe you are looking for