User Exit/Badi - To change the status of Quotation when fully referenced

Hi all,
In the present scenario the quotation is geting completed once it is fully referenced irrespective of whether the refenced quantity in Sales order is rejected or delivered. But I need to to mark the quotation completed only when the referenced quantity is not rejected.
Ex: Say I have a quotaion 1000001 having a material XYZ with quantity 9. Now I have created a sales order referring to the quotaion with same quantity and rejected it. Now my quotation is getting completed. But I dont want that.
I want the quotation to be completed only if the quantity in salesorder is not rejcted
Can anyone help me with pointers to solve this.
Thanks,
Aravind

I think you're seeing standard SAP behavior.  However, a discussion with your SD/LE functional team member might be beneficial. Personally, I don't think SAP supplies a way to "add back" to that quote.  However, you might develop something that changes the quantity on the quote (essentially adds to the original quantity), based on the fact that a SO line got rejected.

Similar Messages

  • User Exit/Badi to change the billing plan date when create sale order

    Experts,
    Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
    My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
    I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

    Hi,
      check the include MV45AFZB.
    Thanks & Regards,
    Sateesh.

  • User exit/BADI for changing the exchage rate type in MIGO

    Dear guru's,
    Please help me in finding the user exit/BADI to change the exchange rate type in MIGO.
    Regards,
    Abdul Rahim

    did you check this one MB_GOODSMOVEMENT?
    also exchange rates needs to be changed at Purchase order level and those will be reflected while creating MIGO.

  • User exit/BADi to change the header text in MIRO transaction

    Hi all,
    I am searching user exit or badi to change the header text in MIRO transaction.
    My requirement is, before post the invoice I need to populate the vendor name in Header text field(MIRO -> Details tab -> header text field ). I have tried all the user exits and BADi's related to MIRO. Doesn't work. If anybody knows please share.
    Thanks,
    Pranav

    Try BADI INVOICE_UPDATE.
    If you are in system version is ECC 6.0, you can find out a Enhancement SPOT (ES_SAPLMRMC) under Function module MRM_FINAL_CHECK, which can be used to perform this requirement
    Hope this helps.
    Thanks,
    Balaji
    Edited by: Balaji Ganapathiraman on Mar 14, 2008 4:43 PM

  • User exit/BADI to change the Accntg doc which gets created during Billing

    I am trying to do the following . Is this possible ?
    When a delivery related billing document is created an accounting document is created in the background , I want to modify the line items in the accounting document, Just before posting the accounting document.
    I am using  exit EXIT_SAPLV60B_008  as suggested but I don't see the accounting line items in any of the internal tables in this exit.
    My accounting document when it gets created looks like this. And I want to modify one of these lines before the document is posted.
    Thanks in advance.
    Regards,
    Ankur Bhandari
    1 01 32517 Jaaaa 3,700.83 USD
    2 50 3100000 MERCHANDISE SALES 3,199.96- USD
    3 40 3100000 MERCHANDISE SALES 160.00 USD
    4 50 3200000 DELIVERY INCOME 132.00- USD
    5 50 3200000 DELIVERY INCOME 10.00- USD
    6 50 2170156 SALES TAX COLLECTED 198.87- USD
    7 50 3400000 WARRANTY INCOME 320.00- USD
    8 15 32517 Jaaaa 3,700.83- USD
    9 40 1117217 RECV. VISA/MCARD Sto 3,700.83 USD
    Any answers on how can I delete line 1 8 and 9 and add another line which balances the amount ?
    Need to do this just before the accounting document gets generated.
    Is this possible ?

    Hi Ajay,
    I just want throw a light on your issue.
    There are couple of other user-exits also available here.
    Just check the required data is available or not?
    EXIT_SAPLV60B_001              User Exit AC Interface (Header Line)               
    EXIT_SAPLV60B_002              User Exit AC Interface (Customer Line)             
    EXIT_SAPLV60B_003              User Exit RW Interface (Cost)                      
    EXIT_SAPLV60B_004              User Exit AC Interface (GL Account Item)           
    EXIT_SAPLV60B_005              User Exit AC Interface (Accruals)                  
    EXIT_SAPLV60B_006              User Exit AC Interface (Tax Line)                  
    EXIT_SAPLV60B_007              User Exit AC Interface (Customer Line)             
    EXIT_SAPLV60B_008              User Exit AC Interface Transfer Tables             
    EXIT_SAPLV60B_010              User Exit Item Table for the Customer Lines        
    Thanks,
    Ramakrishna

  • User Exit/BADI to change the Purchase Requisition date,creating threw MD02

    Hi,
    I've a requirement to change the Purchase Requisition creation date.
    I'm using MD02 to create Purchase Requisition.
    Based on the requirement if the available qty is less than the required quantity,we can change Purchase requisition date.
    Please let me know if any BADI's/User Exits we can use for this purpose.
    I've checked EXIT_SAPLMEREQ_010. I've kept debugging point nad i run MD02, but it is not stopping in the exit.
    we are using SAP 4.6c.
    Thanks,
    Adi.

    Hi Experts,
    Could you please give me a suggestion for the above problem???
    Thanks,
    Adi.

  • User exit/BADi to populate the header text in MIRO transaction

    Hi all,
    I am searching user exit or badi to populate the header text in MIRO transaction.
    My requirement is, before post the invoice I need to populate the some text in Header text field (MIRO -> Details tab -> header text field). I need to populate this field in the MM document as well as FI document (Accounting Document). I have tried all the user exits and BADi's related to MIRO/MRRL. Doesn't work. If anybody knows please share.
    Thanks,
    Santosh
    Edited by: Santosh Ghonasgi on May 13, 2010 4:48 PM

    Hello santosh,
    I am not sure whether a suitable exit / BADI exists to update the header text in MIRO directly.
    there is one related forum:
    User exit/BADi to change the header text in MIRO transaction
    Hope, it may helpful for you to proceed with some other parallel solution.
    Regards,
    Selva K.
    Edited by: Selvakumar Krishnan on May 13, 2010 5:29 PM

  • Is there any user exit/ badi to populate the partner bank type for   F-63.

    Is there any user exit/ badi to populate the partner bank type (field name BSEG-BVTYP) in transaction F-63. There is exit ‘ZFI_FOAP_CDITEMS_00001011’ having BKPF and BSEG as only import parameters so I can’t change the value for BSEG-BVTYP.
    So could you please let me know any exit where I can change the value for BSEG-BVTYP for transaction F-63?
    Thanks in Advance,
    Steevan

    hi,
    Below r the user exit related to transaction  F-63.
    Check out if any of them will solve ur Query..
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002            FIDCC1: Change IDoc/do not send
    F050S003            FIDCC2: Change IDoc/do not send
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001            Balance Sheet Adjustment
    FARC0002            Additional Checks for Archiving MM Vendor Master Data
    FEDI0001            Function Exits for EDI in FI
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00            Line item display: Checking of selection conditions
    RFKORIEX            Automatic correspondence
    SAPLF051            Workflow for FI (pre-capture, release for payment)
    Reward points if helpful,
    Regards,
    Brijesh

  • User Exit/Badi while saving the PO before it is processed

    Hi,
    We have a requirement where in we have to change the release strategy of a PO on saving it , but,before it gets processed. Please let me know if there is any user exit or badi for this scenario.
    Thanks,
    Prasath N

    Hi,
    Thanks for your reply.
    But by the time the above user exit / badi is executed, the PO is outputted, i would like to change the release strategy b4 the PO gets outputted. Any suggestions?
    I am in ECC 6.0.
    Thanks,
    Prasath N

  • User Exit & BADI for controling the END user in co06

    Hi
    I HAVE SOME 2 DOUBTS
    1.  I  need a user exit /  BADI  for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
    the control should be actve for specfic order type for specfic users
    2  DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

    Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

  • IW32 : User-Exit/BADI on Change of User Status

    Dear All,
                                     My requirement is to do some validations when a user changes the User Status of a Service Order to  'Cancel'.
    I am unable to find a user-exit/badi which will get trigerred when the above process occurs. I did find some user-exit at save but none of them will get me the new user status, so that I can check whether the Service Order going to be set as 'Cancel' .
    Regards,
    Antony

    Dear Wolfgang,
                         Thanks for your answer, it was indeed very helpful. I didnt find any luck with the FM you had mentioned but found some other FM:  QMEM_STATUS_OLD_NEW_READ , may be this will help me in solving my problem..There is one more Question which I hadnt mentioned in my post, If my validation over User Status  fails how can I get the old status back.. Because since the EXIT you had mentioned is at SAVE I dont think throwing an Error message will be the right option
    Regards,
    Antony

  • User Exits / BADIs triggered during the Material document creation

    Hi Experts,
    Can anybody tell me the User Exits / BADIs /Possibilities that can be triggered during the Material Document Creation which can be used to update the Equipment Master User Statuses.
    Thanks,
    Sangeeta.

    Hey Sangeeta,
      Try these User Exit's
    MGA00001  Material Master (Industry): Checks and Enhancements
    MGA00002  Material Master (Industry): Number Assignment
    MGA00003  Material Master (Industry and Retail): Number Display
    Using Enhancement MGA00001 (Function Exit : EXIT_SAPLMGMU_001 ) you can validate & Change your Material Document Number.
    Badi's
    BADI_EAN_SYSTEMATIC
    BADI_GTIN_VARIANT
    BADI_MAT_F_SPEC_SEL
    BADI_MATERIAL_CHECK
    BADI_MATERIAL_OD
    BADI_MATERIAL_OD
    BADI_MATERIAL_REF
    BADI_MATNR_CHECK_PVS
    BADI_MM_MATNR
    BADI_MM_MATNR
    CDT_CHECK_MATERIAL
    MG_MASS_NEWSEG
    MG_MASS_NEWSEG
    WRF_DISCONT_FACT_E
    Note: This is for transaction code MM01, MM02 & MM03.
    Regards,
    Saravanan M

  • User Exit/ Badi for Changing Quant parameters during TO Creation

    Hi Gurus,
    Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
    User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
    I will highly appreciate reply from Gurus.
    Regards,
    Gupta M

    Hi manish,
    Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
    Thanks,
    Shibashis

  • User exit / badi to change engine serial-number of vehicle in ie02 ??

    hi all ,
    does anybody familier with user exit/badi that can handle the screen called : vehicle technology
    in transaction ie02 for fleet management .
    i need it in order to update the field : engineserialno that appears in this screen.
    thanks in regard ,
    ami

    hI,
    The following User Exits and BADIs for that tcode.
    Enhancement
    IEQM0001                                Add. checks for equip. installation at functional locations
    IEQM0002                                Additional checks for definition of equipment hierarchies
    IEQM0003                                Additional checks before equipment update
    IEQM0004                                Object is allowed for contract partner (Order->MaintCont.)
    IEQM0005                                Object allowed for SD contract (MaintContract->MaintCont.)
    IEQM0006                                Object allowed for SD contract (Maintain maintenance cont.)
    IEQM0007                                Check/change manufacturer field in equipment master
    Business Add-in
    EQUI_SERLV_CHECK                        External Inspections for MARA_SERLV
    EQUI_SCR_CC                             Implementable Subscreen for Equipment for CCM
    EQUI_SCR_06                             Implementable Subscreen for Equipment No. 06
    EQUI_SCR_05                             Implementable Subscreen for Equipment No. 05
    EQUI_SCR_04                             Implementable Subscreen for Equipment No. 04
    EQUI_SCR_03                             Implementable Subscreen for Equipment No.
    EQUI_SCR_02                             Implementable Subscreen for Equipment No. 02
    EQUI_SCR_01                             Implementable Subscreen for Equipment No. 01
    <REMOVED BY MODERATOR>
    sekhar
    Edited by: Alvaro Tejada Galindo on Feb 27, 2008 3:28 PM

  • User-exit /BADI to change mseg during migo

    HI
    Can someone tell me which user-exit/BADI to be used which lets one change mseg during MIGO. There are some user-exit/BADI during migo but everywhere mseg is an import param. Actually for certain cases I want
    to change the amount in local currency field (dmbtr). I can always forcibly do it from an update-module called from MB_DOCUMENT_BADI but this would lead to inconsistency as the same won't be passed to
    accounting document.
    Regards
    Saurav

    Hi,
    i've also tried using the BAdI mentioned to change for some changes required for price during goods movement.
    after discussion with developer, we found out that the when the program reach the BAdI mentioned, it is already too late as the standard program has already populated the accounting document structure to be posted.
    to change the amounts to be posted to the accounting document can be managed with enhancement spots in inlcude program of LRWCLF01.
    but requires heavy logic to restrict to specific scenarios and  intensive testing, not recommended as it is not within the boundaries of standard SAP allowed changes.
    Cheers,
    Joaquin

Maybe you are looking for