User Exit/BADI to pass external number range in CRM 2007

Hi,
In CRM 2007, Is there any User Exit or BADI to pass number range object externally ?
Like USEREXIT_NUMBER_RANGE routine in MV45AFZZ include ( ECC ).
Business requirement : separate number series is need to be maintained for each service location.
Kindly help if you know the solution.
Thanks
Bhanu

Hello Bhanu,
You need to follow following steps to do so:
Create an external number range in SNRO.
Assign this number range to your transaction type in transaction processing configuration part.
Create an implementation for BADI CRM_ORDERADM_H_BADI or ORDER_SAVE. Now depending upon your condition you can assign the number to the Object id here in the work area.
I hope this helps.
Thanks
Vishal

Similar Messages

  • In ME21N,User Exit/BADI for  Defaulting  Vendor number at item level.

    Hi Experts.
    In ME21N, for every purchase order, we have condtion tab for each line item.
    Many condition typesot taxes  are listed based on the config for the materials.
    My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
    I need a user exit/BADI for defaulting the Vendor number.
    Regards
    Balaji R

    Hi,
    check with below link,
    fo this one you will find both user exit and badis
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
    Regards,
    Madhu

  • User exit -BADI for overriding Partner number in Purchase order output type

    Hello All,
    We have a requirement wherein the EDI message type will distribute the Idoc to the partner number determined in the output type of the purchase order. We are maintaining the condition record for a generic partner number in MN04 and we want this partner number with partner role SH from the condition record to be modified to the sales order sold to party partner number. We are using third party processing and hence sales order number can be fetched from account assignment (EKKN) table of the purchase order. Kindly do let me know the user exit /BADI that can be used for achieving this functionality.
    Thanks in advance for your immediate response.
    With regards,
    Joseph Anand B

    Hi,
    check with below link,
    fo this one you will find both user exit and badis
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
    Regards,
    Madhu

  • External number range for Sales Document

    hi,
        I have a requirement to generate external number range for sales document. I tried this user exit (MV45AFZZ) to generate external number.
    FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN.
    Endform.
    between these form and enform i written my logic and passing to US_RANGE_INTERN. But can one suggest where to write to generate external number range.
    Can any one help me out.
    Thanks and regards,
    Vijay.

    Hi
    Here you can assign a different number range for your sales order.
    The number range is linked to the order type (field VBAK-AUART), this link is done in customizing.
    It usually uses this routine if it can't assign the range in customzing because (for example) for different sales area it need have different number ranges for the same order type.
    So you should create an external range by trx SNRO and then assign the number before entering in the main screen of va01 or saving the document.
    When you need to assign the number depends on how you want to manage your range.
    If you assign the number in entering you has to make sure to not assign the same number document to severals order to be created in the same time by several useers.
    Max

  • Number ranges in crm

    What kind of number ranges  we maintain normally when we are downloading BPs from r3 to crm . EX: I m downloading account groups in r3 to crm for which external
    number ranges were maintained in r3.Do i need to maintain External number ranges or Internal number ranges in crm .
    ( or )
    Can we maintain internal number ranges in both the sides r3 and crm .

    HI,
    You need to maintain only external number range in CRM, when you are replicating from R/3, in R/3 it could be either internal or external.
    Regards
    Milan
    <b>Please reward with Points</b>

  • User Exit/BAdi for Number Range

    Hi All,
    Can anyone tell me is there any User Exit/BAdi for Number Range?
    Rgds,
    Trinadha

    Hi,
    Please check RHIV0001 through transaction SMOD.
    Hope this helps.
    Donnie

  • User exit / badi to change engine serial-number of vehicle in ie02 ??

    hi all ,
    does anybody familier with user exit/badi that can handle the screen called : vehicle technology
    in transaction ie02 for fleet management .
    i need it in order to update the field : engineserialno that appears in this screen.
    thanks in regard ,
    ami

    hI,
    The following User Exits and BADIs for that tcode.
    Enhancement
    IEQM0001                                Add. checks for equip. installation at functional locations
    IEQM0002                                Additional checks for definition of equipment hierarchies
    IEQM0003                                Additional checks before equipment update
    IEQM0004                                Object is allowed for contract partner (Order->MaintCont.)
    IEQM0005                                Object allowed for SD contract (MaintContract->MaintCont.)
    IEQM0006                                Object allowed for SD contract (Maintain maintenance cont.)
    IEQM0007                                Check/change manufacturer field in equipment master
    Business Add-in
    EQUI_SERLV_CHECK                        External Inspections for MARA_SERLV
    EQUI_SCR_CC                             Implementable Subscreen for Equipment for CCM
    EQUI_SCR_06                             Implementable Subscreen for Equipment No. 06
    EQUI_SCR_05                             Implementable Subscreen for Equipment No. 05
    EQUI_SCR_04                             Implementable Subscreen for Equipment No. 04
    EQUI_SCR_03                             Implementable Subscreen for Equipment No.
    EQUI_SCR_02                             Implementable Subscreen for Equipment No. 02
    EQUI_SCR_01                             Implementable Subscreen for Equipment No. 01
    <REMOVED BY MODERATOR>
    sekhar
    Edited by: Alvaro Tejada Galindo on Feb 27, 2008 3:28 PM

  • Exit for assigning external number range to sales document

    hello friends,
    can anyone help with this issue.in tcode 'vn01' we are assiging internal number range but we dont want that number range that is external number range rather than using internal number for sales document.i.e the number range should start with 'ufc'followed by some number range.
    plz reply as soon as possible .
    thanks and regards,
    siri

    Hi Sirisha,
    I believe you can assign external number range manually by using transaction SNRO and then assign the number range before entering into the main screen of  VA01 or saving the document.
    The number range is linked to the order type (VBAK-AUART), this is done in customizing.
    For different sales area it need to have different number ranges for the same order type.
    Please see that the same sales doument number should not be linked to several sales orders which are to be created,if I am not wrong
    Regards,
    Naresh
    ****Please do reward points if found useful

  • To find out user exit/ badi for the VT01n transaction triggered in Save

    Hi Friends,
              I have the following requirement and for this appropriate user exit/ badi should be needed which will trigger during saving of the shipment.
    Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document.  The rules for populating the value (SO, ST, PO and RA) are as follows:
    If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
    If all of the orders are STO orders, then the Cass shipment type should be "ST",
    If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
    If all of the orders are customer return orders, then the Cass shipment type should be "RA".
    I have tried with the 3 badi available and 7 to 8 user exit, but it won't work.
    Thanking a lot in advance for giving the solution.
    With Regards,
    Ajit.

    Hi,
    This code will give you all the user-exits.
    Code:
    & Report ZPJA_PM002 (Ver4) &
    & PJA Consultancy Services (www.pjas.com) &
    & This report attmpts to find Enhancements, Program-Exits, BADIs &
    & and Business Transaction Events in a particular program/tcode. &
    & Other search options: &
    & Program: RPR_ABAP_SOURCE_SCAN &
    & FModule: &
    & Text Elements: &
    & P_DEVC Show user-exits from development class &
    & P_LIMIT Limit submit program selection &
    & P_FUNC Show function modules &
    & P_SUBM Show submit programs &
    & S01 Selection data (TCode takes precedence over program name) &
    report zpja_pm002
    no standard page heading
    line-size 221.
    data: tabix like sy-tabix,
    w_linnum type i,
    w_off type i,
    w_index like sy-tabix,
    w_include like trdir-name,
    w_prog like trdir-name,
    w_incl like trdir-name,
    w_area like rs38l-area,
    w_level,
    w_fsel like sy-ucomm, " Determination of screen field
    w_str(50) type c,
    w_funcname like tfdir-funcname.
    constants: c_fmod(40) type c value 'Function modules selected: ',
    c_subm(40) type c value 'Submit programs selected: ',
    c_col1(12) type c value 'Enhanmt Type',
    c_col2(40) type c value 'Enhancement',
    c_col3(30) type c value 'Program/Include',
    c_col4(20) type c value 'Enhancement Name',
    c_col5(40) type c value 'Enhancement Description',
    c_col6(8) type c value 'Project',
    c_col7(1) type c value 'S',
    c_col8(12) type c value 'ChangeName',
    c_col9(10) type c value 'ChangeDate'.
    Work Areas: ABAP Workbench
    data: begin of wa_d010inc.
    data: master type d010inc-master.
    data: end of wa_d010inc.
    data: begin of wa_tfdir.
    data: funcname type tfdir-funcname,
    pname type tfdir-pname,
    include type tfdir-include.
    data: end of wa_tfdir.
    data: begin of wa_tadir.
    data: devclass type tadir-devclass.
    data: end of wa_tadir.
    data: begin of wa_tstc.
    data: pgmna type tstc-pgmna.
    data: end of wa_tstc.
    data: begin of wa_tstcp.
    data: param type tstcp-param.
    data: end of wa_tstcp.
    data: begin of wa_enlfdir.
    data: area type enlfdir-area.
    data: end of wa_enlfdir.
    Work Areas: BADIs
    data: begin of wa_sxs_attr.
    data: exit_name type sxs_attr-exit_name.
    data: end of wa_sxs_attr.
    data: begin of wa_sxs_attrt.
    data: text type sxs_attrt-text.
    data: end of wa_sxs_attrt.
    Work Areas: Enhancements
    data: begin of wa_modsap.
    data: member type modsap-member.
    data: end of wa_modsap.
    data: begin of wa_modsapa.
    data: name type modsapa-name.
    data: end of wa_modsapa.
    data: begin of wa_modsapt.
    data: modtext type modsapt-modtext.
    data: end of wa_modsapt.
    Work Areas: Business Transaction Events
    data: begin of wa_tbe01t.
    data: text1 type tbe01t-text1.
    data: end of wa_tbe01t.
    data: begin of wa_tps01t.
    data: text1 type tps01t-text1.
    data: end of wa_tps01t.
    user-exits
    types: begin of ty_mod,
    member like modact-member,
    name like modact-name,
    status like modattr-status,
    anam like modattr-anam,
    adat like modattr-adat,
    end of ty_mod.
    data: w_mod type ty_mod.
    types: begin of t_userexit,
    type(12) type c,
    pname like trdir-name,
    txt(300),
    level type c,
    modname(30) type c,
    modtext(60) type c,
    modattr type ty_mod,
    end of t_userexit.
    data: i_userexit type standard table of t_userexit with header line.
    Function module developmnet classes
    types: begin of t_devclass,
    clas like trdir-clas,
    end of t_devclass.
    data: i_devclass type standard table of t_devclass with header line.
    types: begin of t_enlfdir,
    area type enlfdir-area,
    end of t_enlfdir.
    data: i_enlfdir type standard table of t_enlfdir with header line.
    Submit programs
    types: begin of t_submit,
    pname like trdir-name,
    level,
    done,
    end of t_submit.
    data: i_submit type standard table of t_submit with header line.
    Source code
    types: begin of t_sourcetab, "#EC * (SLIN lügt!)
    line(200), "#EC * (SLIN lügt!)
    end of t_sourcetab. "#EC * (SLIN lügt!)
    data: sourcetab type standard table of t_sourcetab with header line.
    data c_overflow(30000) type c.
    Description of an ABAP/4 source analysis token
    data: i_stoken type standard table of stokex with header line.
    data wa_stoken like i_stoken.
    Description of an ABAP/4 source analysis statement
    data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
    keywords for searching ABAP code
    types: begin of t_keywords,
    word(30),
    end of t_keywords.
    data: keywords type standard table of t_keywords with header line.
    function modules within program
    types: begin of t_fmodule,
    name like rs38l-name,
    pname like trdir-name,
    pname2 like trdir-name,
    level,
    bapi,
    done,
    end of t_fmodule.
    data: i_fmodule type standard table of t_fmodule with header line.
    & Selection Options &
    selection-screen begin of block selscr1 with frame title text-s01.
    parameter: p_pname like trdir-name memory id rid,
    p_tcode like syst-tcode,
    p_limit(4) type n default 100,
    p_devc like rihea-dy_ofn default ' ',
    p_func like rihea-dy_ofn default ' ',
    p_subm like rihea-dy_ofn default ' '.
    selection-screen end of block selscr1.
    & START-OF-SELECTION &
    start-of-selection.
    if p_pname is initial and p_tcode is initial.
    message e008(hrfpm). "Make entry on the selection screen
    stop.
    endif.
    ensure P_LIMIT is not zero.
    if p_limit = 0.
    p_limit = 1.
    endif.
    perform data_select.
    perform get_submit_data.
    perform get_fm_data.
    perform get_additional_data.
    perform data_display.
    & Form DATA_SELECT &
    form data_select.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get programs/includes' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    determine search words
    keywords-word = 'CALL'.
    append keywords.
    keywords-word = 'FORM'.
    append keywords.
    keywords-word = 'PERFORM'.
    append keywords.
    keywords-word = 'SUBMIT'.
    append keywords.
    keywords-word = 'INCLUDE'.
    append keywords.
    if not p_tcode is initial.
    get program name from TCode
    select single pgmna from tstc into wa_tstc-pgmna
    where tcode eq p_tcode.
    if not wa_tstc-pgmna is initial.
    p_pname = wa_tstc-pgmna.
    TCode does not include program name, but does have refereve TCode
    else.
    select single param from tstcp into wa_tstcp-param
    where tcode eq p_tcode.
    if sy-subrc = 0.
    check wa_tstcp-param(1) = '/'.
    check wa_tstcp-param+1(1) = '*'.
    if wa_tstcp-param ca ' '.
    endif.
    w_off = sy-fdpos + 1.
    subtract 2 from sy-fdpos.
    if sy-fdpos gt 0.
    p_tcode = wa_tstcp-param+2(sy-fdpos).
    endif.
    select single pgmna from tstc into wa_tstc-pgmna
    where tcode eq p_tcode.
    p_pname = wa_tstc-pgmna.
    if sy-subrc <> 0.
    message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
    endif.
    else.
    message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
    endif.
    endif.
    endif.
    Call customer-function aus Program coding
    read report p_pname into sourcetab.
    if sy-subrc > 0.
    message e017(enhancement) with p_pname raising no_program."#EC *
    endif.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    overflow into c_overflow
    with includes.
    if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
    message e130(enhancement) raising syntax_error. "#EC *
    endif.
    check I_STOKEN for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_level = '0'.
    w_prog = ''.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endform. "DATA_SELECT
    & Form GET_FM_DATA &
    form get_fm_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get function module data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure. "#EC *
    Function module data
    sort i_fmodule by name.
    delete adjacent duplicates from i_fmodule comparing name.
    loop at i_fmodule where done ne 'X'.
    clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
    refresh: i_stoken, i_sstmnt, sourcetab.
    store function groups
    select single area from enlfdir into wa_enlfdir-area
    where funcname = i_fmodule-name.
    i_enlfdir-area = wa_enlfdir-area.
    append i_enlfdir.
    Store development classes
    if not wa_enlfdir-area is initial.
    select single devclass into wa_tadir-devclass
    from tadir where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = wa_enlfdir-area.
    check not wa_tadir-devclass is initial.
    move wa_tadir-devclass to i_devclass-clas.
    append i_devclass.
    endif.
    clear wa_tfdir.
    select single funcname pname include from tfdir into wa_tfdir
    where funcname = i_fmodule-name.
    check sy-subrc = 0.
    call function 'FUNCTION_INCLUDE_SPLIT'
    exporting
    program = wa_tfdir-pname
    importing
    group = w_area.
    concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
    i_fmodule-pname = w_include.
    i_fmodule-pname2 = wa_tfdir-pname.
    modify i_fmodule.
    read report i_fmodule-pname into sourcetab.
    if sy-subrc = 0.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    with includes.
    if sy-subrc > 0.
    message e130(enhancement) raising syntax_error.
    endif.
    check i_stoken for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_level = '1'.
    w_prog = i_fmodule-pname2.
    w_incl = i_fmodule-pname.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endif.
    endloop.
    sort funtion groups
    sort i_devclass.
    delete adjacent duplicates from i_devclass.
    sort i_enlfdir.
    delete adjacent duplicates from i_enlfdir.
    endform. "GET_FM_DATA
    & Form GET_SUBMIT_DATA &
    form get_submit_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get submit data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    sort i_submit.
    delete adjacent duplicates from i_submit comparing pname.
    w_level = '0'.
    loop at i_submit where done ne 'X'.
    check i_submit-pname ne p_pname. " ensure not the same as origianl program
    clear: i_stoken, i_sstmnt, sourcetab.
    refresh: i_stoken, i_sstmnt, sourcetab.
    read report i_submit-pname into sourcetab.
    if sy-subrc <> 0.
    delete i_submit.
    continue.
    else.
    scan abap-source sourcetab tokens into i_stoken
    statements into i_sstmnt
    keywords from keywords
    with includes.
    if sy-subrc > 0.
    continue.
    endif.
    check i_stoken for entries
    clear w_linnum.
    describe table i_stoken lines w_linnum.
    if w_linnum gt 0.
    w_prog = i_submit-pname.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
    endif.
    endif.
    restrict number of submit program selected for processing
    describe table i_submit lines w_linnum.
    if w_linnum ge p_limit.
    w_level = '1'.
    endif.
    i_submit-done = 'X'.
    modify i_submit.
    endloop.
    sort i_submit.
    delete adjacent duplicates from i_submit comparing pname.
    endform. "GET_SUBMIT_DATA
    & Form DATA_SEARCH &
    form data_search tables p_stoken structure stoken
    using p_level p_prog p_incl.
    loop at p_stoken.
    clear i_userexit.
    tabix = sy-tabix + 1.
    i_userexit-level = p_level.
    if i_userexit-level = '0'.
    if p_incl is initial.
    i_userexit-pname = p_pname.
    else.
    concatenate p_pname '/' p_incl into i_userexit-pname.
    endif.
    else.
    if p_incl is initial.
    i_userexit-pname = p_prog.
    else.
    concatenate p_prog '/' p_incl into i_userexit-pname.
    endif.
    endif.
    Include
    if p_stoken-str eq 'INCLUDE'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    check not wa_stoken-str cs 'STRUCTURE'.
    check not wa_stoken-str cs 'SYMBOL'.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    i_submit-level = p_level.
    append i_submit.
    endif.
    endif.
    Enhancements
    if p_stoken-str eq 'CUSTOMER-FUNCTION'.
    clear w_funcname.
    read table p_stoken index tabix.
    translate p_stoken-str using ''' '.
    condense p_stoken-str.
    if p_prog is initial.
    concatenate 'EXIT' p_pname p_stoken-str into w_funcname
    separated by '_'.
    else.
    concatenate 'EXIT' p_prog p_stoken-str into w_funcname
    separated by '_'.
    endif.
    select single member from modsap into wa_modsap-member
    where member = w_funcname.
    if sy-subrc = 0. " check for valid enhancement
    i_userexit-type = 'Enhancement'.
    i_userexit-txt = w_funcname.
    append i_userexit.
    else.
    clear wa_d010inc.
    select single master into wa_d010inc-master
    from d010inc
    where include = p_prog.
    concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
    separated by '_'.
    i_userexit-type = 'Enhancement'.
    i_userexit-txt = w_funcname.
    endif.
    endif.
    BADIs
    if p_stoken-str cs 'cl_exithandler='.
    w_index = sy-tabix + 4.
    read table p_stoken index w_index into wa_stoken.
    i_userexit-txt = wa_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    i_userexit-type = 'BADI'.
    append i_userexit.
    endif.
    Business transaction events
    if p_stoken-str cs 'OPEN_FI_PERFORM'.
    i_userexit-type = 'BusTrEvent'.
    i_userexit-txt = p_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    i_userexit-modname = i_userexit-txt+16(8).
    case i_userexit-txt+25(1).
    when 'E'.
    clear wa_tbe01t.
    select single text1 into wa_tbe01t-text1 from tbe01t
    where event = i_userexit-txt+16(8)
    and spras = sy-langu.
    if wa_tbe01t-text1 is initial.
    i_userexit-modtext = ''. "#EC NOTEXT
    else.
    i_userexit-modtext = wa_tbe01t-text1.
    endif.
    i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
    when 'P'.
    clear wa_tps01t.
    select single text1 into wa_tps01t-text1 from tps01t
    where procs = i_userexit-txt+16(8)
    and spras = sy-langu.
    i_userexit-modtext = wa_tps01t-text1.
    i_userexit-modname+8 = '/Process'.
    endcase.
    append i_userexit.
    endif.
    Program exits
    if p_stoken-str cs 'USEREXIT_'.
    i_userexit-type = 'Program Exit'.
    i_userexit-txt = p_stoken-str.
    replace all occurrences of '''' in i_userexit-txt with space.
    append i_userexit.
    endif.
    Submit programs
    if p_stoken-str cs 'SUBMIT'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
    replace all occurrences of '''' in wa_stoken-str with space.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    i_submit-level = p_level.
    append i_submit.
    endif.
    endif.
    Perform routines (which reference external programs)
    if p_stoken-str cs 'PERFORM'.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    if not wa_stoken-ovfl is initial.
    w_off = wa_stoken-off1 + 10.
    w_str = c_overflow+w_off(30).
    find ')' in w_str match offset w_off.
    w_off = w_off + 1.
    wa_stoken-str = w_str(w_off).
    endif.
    check wa_stoken-str cs '('.
    w_off = 0.
    while sy-subrc = 0.
    if wa_stoken-str+w_off(1) eq '('.
    replace section offset w_off length 1 of wa_stoken-str with ''.
    replace all occurrences of ')' in wa_stoken-str with space.
    read table i_submit with key pname = wa_stoken-str.
    if sy-subrc <> 0.
    i_submit-pname = wa_stoken-str.
    append i_submit.
    endif.
    exit.
    else.
    replace section offset w_off length 1 of wa_stoken-str with ''.
    shift wa_stoken-str left deleting leading space.
    endif.
    endwhile.
    endif.
    Function modules
    if p_stoken-str cs 'FUNCTION'.
    clear i_fmodule.
    check p_level eq '0'. " do not perform for function modules (2nd pass)
    w_index = sy-tabix + 1.
    read table p_stoken index w_index into wa_stoken.
    if wa_stoken-str cs 'WF_'.
    if wa_stoken-str cs 'IDOC'.
    break-point.
    endif.
    if wa_stoken-str cs 'BAPI'.
    i_fmodule-bapi = 'X'.
    endif.
    replace first occurrence of '''' in wa_stoken-str with space.
    replace first occurrence of '''' in wa_stoken-str with space.
    if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
    clear wa_tfdir.
    concatenate wa_stoken-str '%' into wa_stoken-str.
    select single funcname into wa_tfdir-funcname from tfdir
    where funcname like wa_stoken-str.
    if sy-subrc = 0.
    i_fmodule-name = wa_tfdir-funcname.
    else.
    continue.
    endif.
    else.
    i_fmodule-name = wa_stoken-str.
    endif.
    read table i_fmodule with key name = i_fmodule-name.
    if sy-subrc <> 0.
    i_fmodule-level = p_level.
    append i_fmodule.
    endif.
    endif.
    endloop.
    endform. "DATA_SEARCH
    & Form GET_ADDITIONAL_DATA &
    form get_additional_data.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Get additional data' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    loop at i_userexit.
    Enhancement data
    if i_userexit-type cs 'Enh'.
    clear: wa_modsapa.
    select single name into wa_modsapa-name from modsap
    where member = i_userexit-txt.
    check sy-subrc = 0.
    i_userexit-modname = wa_modsapa-name.
    clear wa_modsapt.
    select single modtext into wa_modsapt-modtext from modsapt
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    i_userexit-modtext = wa_modsapt-modtext.
    MOH - enhancement to get the project name
    clear w_mod.
    select single modactmember modactname modattr~status
    modattranam modattradat
    into w_mod
    from modact
    inner join modattr
    on modattrname = modactname
    where modact~member = wa_modsapa-name
    and modact~typ = space.
    i_userexit-modattr = w_mod.
    MOH - eoe
    endif.
    BADI data
    if i_userexit-type eq 'BADI'.
    clear wa_sxs_attr.
    select single exit_name into wa_sxs_attr-exit_name from sxs_attr
    where exit_name = i_userexit-txt.
    if sy-subrc = 0.
    i_userexit-modname = i_userexit-txt.
    else.
    i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
    endif.
    clear wa_sxs_attrt.
    select single text into wa_sxs_attrt-text from sxs_attrt
    where exit_name = wa_sxs_attr-exit_name
    and sprsl = sy-langu.
    i_userexit-modtext = wa_sxs_attrt-text.
    endif.
    modify i_userexit.
    endloop.
    get enhancements via program package
    clear wa_tadir.
    select single devclass into wa_tadir-devclass from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = p_pname.
    if sy-subrc = 0.
    clear: wa_modsapa, wa_modsapt.
    select name from modsapa into wa_modsapa-name
    where devclass = wa_tadir-devclass.
    select single modtext from modsapt into wa_modsapt-modtext
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    read table i_userexit with key modname = wa_modsapa-name.
    if sy-subrc <> 0.
    i_userexit-modtext = wa_modsapt-modtext.
    i_userexit-type = 'Enhancement'. "#EC NOTEXT
    i_userexit-modname = wa_modsapa-name.
    i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
    i_userexit-pname = 'Unknown'. "#EC NOTEXT
    append i_userexit.
    endif.
    endselect.
    endif.
    Get IDOCs
    loop at i_devclass.
    endloop.
    endform. "GET_ADDITIONAL_DATA
    & Form DATA_DISPLAY &
    form data_display.
    data selection message to sap gui
    call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
    text = 'Prepare screen for display' "#EC NOTEXT
    exceptions
    system_failure
    communication_failure
    . "#EC *
    sort i_userexit by type txt modname.
    delete adjacent duplicates from i_userexit comparing txt modname.
    format headings
    write: 'Enhancements from main program'. "#EC NOTEXT
    write: /.
    uline.
    format color col_heading.
    write: / sy-vline,
    (12) c_col1, "Enhanmt Type
    sy-vline,
    (40) c_col2, "Enhancement
    sy-vline,
    (30) c_col3, "Program/Include
    sy-vline,
    (20) c_col4, "Enhancement name
    sy-vline,
    (60) c_col5, "Enhancement description
    sy-vline,
    (8) c_col6, "Project
    sy-vline,
    (1) c_col7, "S
    sy-vline,
    (12) c_col8, "ChangeName
    sy-vline,
    (10) c_col9, "ChangeDate
    sy-vline.
    format reset.
    uline.
    format lines
    loop at i_userexit.
    set line colour
    case i_userexit-type.
    when 'Enhancement'.
    format color 3 intensified off.
    when 'BADI'.
    format color 4 intensified off.
    when 'BusTrEvent'.
    format color 5 intensified off.
    when 'Program Exit'.
    format color 6 intensified off.
    when others.
    format reset.
    endcase.
    write: / sy-vline,
    i_userexit-type,
    sy-vline,
    i_userexit-txt(40),
    sy-vline,
    i_userexit-pname(30),
    sy-vline,
    i_userexit-modname(20),
    sy-vline,
    i_userexit-modtext(60),
    sy-vline,
    i_userexit-modattr-name,
    sy-vline,
    i_userexit-modattr-status,
    sy-vline,
    i_userexit-modattr-anam,
    sy-vline,
    i_userexit-modattr-adat no-zero,
    sy-vline.
    hide: i_userexit-type,
    i_userexit-txt,
    i_userexit-pname,
    i_userexit-modname,
    i_userexit-modtext.
    endloop.
    format reset.
    uline.
    user-exits from development class of function modules
    if p_devc = 'X'.
    write: /.
    write: / 'User-exits from function module development class'."#EC NOTEXT
    write: 157''.
    uline (90).
    write: 157''.
    loop at i_devclass.
    clear wa_modsapa.
    select name from modsapa into wa_modsapa
    where devclass = i_devclass-clas.
    select single name modtext into corresponding fields of wa_modsapt
    from modsapt
    where name = wa_modsapa-name
    and sprsl = sy-langu.
    format color 3 intensified off.
    write: / sy-vline,
    (12) 'Enhancement',
    sy-vline,
    wa_modsapa-name,
    sy-vline,
    wa_modsapt-modtext,
    sy-vline.
    endselect.
    endloop.
    uline (90).
    format reset.
    endif.
    describe table i_fmodule lines w_linnum.
    write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
    write: 157''.
    if p_func = 'X'.
    display fuction modules used in program
    uline (38).
    write: 157''.
    loop at i_fmodule.
    write: sy-vline,
    i_fmodule-name,
    sy-vline,
    i_fmodule-bapi,
    sy-vline.
    write: 157''.
    endloop.
    uline (38).
    write: 157''.
    endif.
    describe table i_submit lines w_linnum.
    write: / c_subm , at 35 w_linnum. "#EC NOTEXT
    write: 157''.
    if p_subm = 'X'.
    display submit programs used in program
    uline (44).
    write: 157''.
    loop at i_submit.
    write: sy-vline,
    i_submit-pname,
    sy-vline.
    write: 157''.
    endloop.
    uline (44).
    endif.
    issue message with number of user-exits displayed
    describe table i_userexit lines w_linnum.
    message s697(56) with w_linnum.
    endform. "DATA_DISPLAY
    & User Selection Processing &
    at line-selection.
    get cursor field w_fsel.
    case w_fsel.
    when 'I_USEREXIT-MODNAME'.
    case i_userexit-type.
    when 'Enhancement'.
    set parameter id 'MON' field i_userexit-modname.
    call transaction 'SMOD' and skip first screen.
    when 'BADI'.
    check i_userexit-modname ne 'Dynamic call'.
    set parameter id 'EXN' field i_userexit-modname.
    call transaction 'SE18' and skip first screen.
    when 'BusTrEvent'.
    submit rfopfi00 with attr_typey_selm = 'A'
    with event = i_userexit-modname(8)
    via selection-screen
    and return.
    when others.
    endcase.
    when 'I_USEREXIT-PNAME'.
    check i_userexit-modname ne 'Unknown'.
    w_off = 0.
    find '/' in i_userexit-pname match offset w_off.
    if w_off = 0.
    set parameter id 'RID' field i_userexit-pname.
    call transaction 'SE38' and skip first screen.
    else.
    w_off = w_off + 1.
    w_prog = i_userexit-pname+w_off.
    set parameter id 'RID' field w_prog.
    call transaction 'SE38' and skip first screen.
    endif.
    when others.
    endcase.
    Feel free to revert back.
    --Ragu

  • User Exit / Badi / BTE for Asset creation A ?

    Hi Experts,
    I need User Exit  / BADI / BTE for asset Creation.
    After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
    i have tried all this.But no one is triggering after saving the As01 transaction.
    Exit Name           Description                                                                               
    AAPM0001            Integration of asset accounting and plant maintenance                    
    AFAR0003            External changeover method                                               
    AFAR0004            Determination of proportional values for retirement                      
    AINT0004            Change amount posted for certain areas                                   
    AINT0005            Dummy for extended syntax check. Do not use.                             
    AISA0001            Assign Inventory Number                                                  
    AIST0001            Exchange number range in master data maintenance                         
    AIST0002            Customer fields in asset master                                          
    AMSP0002            Determine relationship type for two company codes                        
    TRAN0001            User exit for asset transfer           
    Please suggest if anybody worked on this.
    regards,
    Imran

    Hi,
    Check out the following posts pertaining to similar topic.
    Change Asset Workflow
    Asset Management WORKFLOW
    Regards
    Sreekanth

  • SD - Billing - External Number Range

    Hi,
    I have two questions related to SD billing document numbering:-
    1. I am getting error message of [Please specify an internal number range Message no. NR752] while saving a billing document based on the delivery. I have checked only external number range box in VN01. Do I need to use any user-exit for this? If yes then there are 2 user exits available -
    a) USEREXIT_NUMBER_RANGE_INV_DATE USING US_RANGE_INTERN in program RV60AFZC
                              b) FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN in program RV60AFZZ
    but both the cases the variable is US_RANGE_INTERN which is not allowing external number range ID to pass. How this external no range works.?
    2. I have a business requirement for our Mexican company code on external alphanumeric number. There would be 3 billing types say, ZF2, YF2 and ZYF2. Mexican government provides Invoice numbers in advance.
    ZF2 Number range would be A001 to A999
    YF2 Number range would be B001 to B999
    ZYF2 Number range would be C001 to C999.
    All these Invoices would be created at same time. i.e. parallel processing. Also all these invoices would be transmitted thru EDI -IDOC. And accounting document should have same number as billing document will carry i.e. external govt provided numbers.
    How do I map this in systems. My experience says alphanumeric number range is not supported by SAP. Anybody may share his solution on this would be simply great.
    Thanks
    Subrata Das

    FORM USEREXIT_NUMBER_RANGE                                    *
          This userexit can be used to determine the numberranges for   *
          the internal document number.                                 *
          US_RANGE_INTERN - internal number range                       *
          This form is called from form LV60AU02                        *
    FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN.
    Example: Number range from TVFK like in standard
    US_RANGE_INTERN = TVFK-NUMKI.
    *{   INSERT         DEVK905392                                        1
    There was a need to check whether all the mandatory pricing
    conditions have been filled before creation of an invoice so that
    the invoice is released to accounting as and when it is created.
    Piece of code written below ensures the same. Field uvprs = 'X'
    in item table indicates that the item is incomplete with respect to
    pricing.
      LOOP AT xvbrp WHERE uvprs = 'X'.
        EXIT.
      ENDLOOP.
      IF sy-subrc EQ 0.
        MESSAGE e073(vf) WITH xvbrp-posnr.
      ENDIF.
    TABLES : zbd_nr_code.
    data : aa like zbd_nr_code-nr_code.
      IF sy-tcode = 'VF01'.
       SELECT SINGLE *
         FROM tvko
        WHERE vkorg = vbak-vkorg.
       IF sy-subrc EQ 0.
          SELECT SINGLE NR_CODE INTO ZBD_NR_CODE-NR_CODE
            FROM zbd_nr_code
           WHERE vkorg    = vbrk-vkorg
             AND werks    = vbrp-werks
             AND fkart    = vbrk-fkart.
          IF sy-subrc = 0 .
            us_range_intern = zbd_nr_code-nr_code.
          ENDIF.
       ENDIF.
      ENDIF.
    I feel this will help out.
    Regards

  • Serial number with external number range.

    Dear all
    pl how to configure the logice for serial number like gbrx123xeao120001here gbr is prefix code which is fixed x is model sufix,e is yaer of mfg 0001 is serialnumber. so now tell me how to generate the aboce said serial number when production order creation.
    pl tell me all config and related settings .
    thanks and regards
    Baswaraj

    Hi ,
    Please mainatain the external number range  for serial number management as
    from 01 to  999999999....... and AAAA.....to  ZZZZZZZZ.....
    While  doing goods movment you can use    user exit to  define serial number as per the customized calculations .
    Also you can create  seperate Zprogram  for goods movement  there  u can calculate for  Serial number and  pass it  to  goods movement BAPI  as  per your requirement .
    Hope this information helpful .
    Best regards ,
    Chithaanantham

  • User Exit/BADI/Enhancement Point  in VF01 before new document no assignment

    Hi Expert,
       I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
    I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
    Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
    I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment.  Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
    Regards
    Swati
    Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

    HI Brad and team,
       BRED is right. I check few user exit normally all of us have that list or easily available on net.
    BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
    If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
    That why I need a User Exit/BADI/Enhancement Point  which trigger at save but before document no assignment.
    Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process."  .
    Suggest user exit USEREXIT_FILL_VBRK_VBRP  trigger before save. I need at save the reason is VBRK-FKDAT  this can be change.
    Feel free to contact me back if you need more clarification.
    Regards
    Swati
    Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
    Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

  • Need User exit/BADI or BTE for FF_5

    Hi,
    My requirement is to enhance the automatic clearing rules for tcode ff_5.
    Program RFEBKA00 will upload bank statement items based on the external transaction codes provided by the banks .
    The standard posting rules will clear a GL bank account using a set of algorithms for further interpretation
    set of standard algorithms do not meet the clearing criteria .hence i need user exit / badi/bte to enhance the automatic clearing rules.
    EXIT ZXF01U01& or FEB_BADI are triggering before posting the document.hence i think we can not use these.
    Please suggest me the alternate solution.

    Hi,
    We are facing a similar requirement. We are trying to enhance the interpretation logarithm using search string. The requirement is to update the text field with a Constant Prefix + a number from the Notes to Payee field. For e.g.:
    The BAI file transaction data is like:
    16,169,94906,V,120108,0000,6008ABS43400024460,783517/
    88,TBS EUROPE LTD   203647 10293164
    88,/ENTRY-06 FEB
    88,TRF/REF  6008ABS43400024475
    88,783517 BANK GIRO CREDIT
    We defined a search string to find the text 'TBS EUROPE LTD' and if it is found, the search string fetches the number '783517' from the Notes to Payee field and thereafter, at the time of posting, the text field has to be updated with '120108 TBS EUROPE LTD 783517', where 120108 is the validity date of the incoming money through this transaction and which does not form part of the Notes to Payee field.
    Also, if just the number '783517' has to be updated in the text field.
    Please suggest how to achieve this functionality.
    Thanks in advance.
    Regards
    Sourabh

  • Alphnumeric External Number range for Equipment category

    Hi,
    Is there any other option that I can restrict length of external alpha numeric number range except that exit IEQM0003? This exit only applicable or restrict when you save the equipment.
    Requirement is like external number range should be like AAA-000 to ZZZ-999. System must not allowed any other equipment number which is out of this range. ( must be 7 character)
    As far as my understanding , system use string comparison once you use alphanumeric number range and you can create equipment with 18 char length except special character if above range is maintained.
    Please correct me if i am wrong and suggest.
    Thanks
    Anish Ahya

    Hi Zenith,
    Its not available in Standard SAP, please use the user exit and tell the ABAPER to check the Equipment numbering (count) before entering into Creation screen. In IE01,entering equipment Number, Category and date after completion of this activity when we enter continue icon there u can put a condition to check the length of equipment number. I implemented that user exit and i got the result. its working fine. User Exit: IEQM0003.
    regards
    Jalu

Maybe you are looking for