User exit co01

GUY'S
when i go for tcode:CA02 and set status to 3 in general
data section and then go to tcode co01 to create
production order for the same material and same plant,
it pop up message ( routing not released:15294)
and then it save it.but requriment is not to create
production order when routing is set to 3,problem
is i ckecked all possile user-exit ,but non of the user-exit is triggered for particular situation,pls help,
it's urgent and i am not getting any idea

User_exit in CA02
Transaction Code - CA02                     Change Routing
Exit Name           Description
CMDI001             Determine explosion control for BOM
CPAU0001            Enhancement for Authorization Check in Task Lists
CPDO0001            Test units of measure for reference operation set
CPRE0001            Enhancement for Reorgnization Checks in Task Lists
XCZD0004            Extend authority check for the material-recipe allocation
You can copy this program to find user_exit
Check thread
Hope thisll give you idea!!
P.S award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Similar Messages

Trigger a waiting ABAP program from a User Exit of CO01

Hi all,
   We would like to launch a ABAP program from a User Exit (EXIT_SAPLCOZV_001) of CO01, this ABAP program has a special characteristic: using Function Module RFC_PING_AND_WAIT, so this program will be existing until terminating event coming.
    Our purpose is terminate CO01 normally before finishing of ABAP program. We don't know if it's possible?
    Actually:
       1. when we use SUBMIT ..., the process will stop CO01 (stop not normally) and then launch ABAP program. => This is not suitable for our purpose.
       2. when we use SUBMIT ... and RETURN, CO01 will wait for finishing of ABAP program => This is not suitable for our purpose too, because we wish CO01 terminated normally when ABAP program is still existing and waiting for its terminating event.
Do you have a solution that is suitable for our purpose, could you please help us?
(The context is below:
Time: Begin-->CO finished> ABAP finished-->
   Launch CO01 --> Call User Exit --> Call ABAP program for waiting --> CO01 saved normally.
> ABAP program still waiting ---> waiting for terminating event
Thanks a lot,
Vinh Vo

Hi,
     Try with the function module BP_EVENT_RAISE, it takes eventid, and eventparm as import parameters in the User exit.
1) With Eventid, you create a background job of the ABAP program and schedule it. Eventparm can be the Production order number.
2) So when ever the Event is triggered the FM gets triggered and which in turn run the ABAP program, so the foreground the CO01 transaction runs without waiting for the ABAP program to complete.
Regards
Bala Krishna

Updating user fields through a user exit in CO01

Hi..
I'm new to user exits and knw there are loads of user exits for CO01, but can't find the exact one to modify the user fields.. And also, would a simple
afvgd-usr00 = 'some material' work???
Tnx..

Try with OSS note:
68720
Symptom
The system does not display the 'User data' operation detail screen when you create an operation of a production order with input facilities.
Additional key words
CO01, CO02
Cause and prerequisites
Solution
1. Add the following entry to table TCO62:
CAT SeqKey Verif.No Program Grp Panel 10 OC0001 7 SAPLCOVF V9 0201
UseTransaction SM31.
Table TCO62 is client-specific, that is, you must create the entry inall relevant clients.
2. See the attached advance corrections. If you have implemented an earlier version of this note, please note that, for up to Release 3.0F, the correction was changed for Include LCOVFO10.

User Exit For Co01 Transaction

Hi Friends,
When I create a production order in co01 Transition. Header Storage location should be filled based on order type. Please share user exit do the change storage location.
Regards,
Jyo
Moderator Message: Duplicate Post. Thread Locked
Edited by: kishan P on Oct 18, 2010 3:37 PM

Hi
Go to transaction CMOd and create a project there and activate it
then find the user exits there for transaction CO01.
you will find it there.
Or go to SE84 and look for enhancement there.
thanks
Lalit Gupta

User exit / BADI for CO01

Hi all,
I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
Thanks and regards
Jijo

Exit Name           Description
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User-Exits/Badis for T.Code Co01 Production Order

Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........

These are the available user exits..
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User Exit for CO01/CO02 : How to check production order before saving ?

Hi all,
I try to check production order before saving.
if AFPO-LGORT or RESB-LGORT or some other field is initial, throw an error msg and stop saving process.
I try using badi WORKORDER_UPDATE and user exit PPCO0001 EXIT_SAPLCOBT_001, find out that i can check the data but can't stop the saving process.
Anyone knows some other user exits can do this?
Thanks a lot.

Solved.
A wired solution from
http://abaplog.wordpress.com/2007/03/01/reading-other-programs-data-using-field-symbols-in-abap/

User Exit for CO01

Hi All,
Want to trigger my user exit whenever any production order is released. Here i need to check the available material quantity.My enhancement is PPCO0005 and
component EXIT_SAPLCOSD_001.Please suggest from which trasaction and where i should debug my prg.
Thanks in Advance
Kavya

Hi Ravi,
Have tried my exit in CO02 but its not triggering.Added the enhancement in the given project and activated also.
while pressing Release without triggering exit its giving status as "Released order".
Have to do any changes on CO02? Kindly suggest. Its urgent.
Thanks in Advance

User Exit after creation of Production Order

Hello gurus.
I would like to populate a table with the Production Order number once I create the document in transaction CO01. The problem is, I cannot find a user exit that can be executed after I save the Production Order number.
We use internal assignment of production order numbers, so we don't know the number of the document until it's created. I'd like to find a way to be able to get the number of the document, once it's created and add it in a custom table I created.
Is there a User Exit for this? Or maybe an alternative way of achieving this?
Thank you.

Fernando,
I would suggest you to create a custom table and custom program. The program should pick up the all the orders which were created from AFKO table, on successful completion of running the program it should update the custom table with the date and completion time. So next time when this program is run, it should pick up order who's creation date and time is greater than that in the custom table. You can schedule to run this program in background.
Regards,
Prasobh

User exit to populate profit center in production order change (CO02)

Hello,
The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
Is there a user exit /BADI that can acheive this requirement?
Thanks a lot for your advise.
Joe

Hi,
Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
HEADER_EXP-PRCTR
Thanks,
Shailaja Ainala.

User-exits for PO and MIGO

Hello Experts
i am having a requirement where in i will have to perform certain validations before posting PO and material document (MIGO). If these validations fail, PO or Material document should not be posted.
i managed to find certain BADI and user-exits (MB_CF001 and MB_DOCUMENT_BADI) typically for MIGO but when tested they use to get triggered once these doucment numbers are generated.
what i am looking at is cancel the process by giving the hard-error.
thanks in advance.
regards
rajeev

Hi,
<b>User exits for MIGO:</b>
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read From RESB and RKPF For Print List in MB26
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
<b>User eits for PO:</b>
These are the User exit for CO01 ( Create PO)
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting
I am giving you the list of all user exits available for ME21N:
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
For your purpose you can probably try MM06E005. Or you can also try BADI ME_PROCESS_PO_CUST.
You can also check this BADI available for PO:
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standa
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Cust
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Custom
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_RELEASE_CREATE BAdI: Release Creation for Sched. Agreemnts with Rel. Do
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Orde
SMOD_MRFLB001 Control Items for Contract Release Order
Transaction codes for BADI are:
SE18 - Business Add-ins(BADIs): Definition transaction
SE19 - Business Add-ins(BADIs): Implementation transaction
SE24 - Class Builder
Link for all user exits in SAP:
http://www.easymarketplace.de/userexit.php
Pls reward helpful points.
Regards,
Ameet

Production Order BADI or User Exit

Hi All,
I have a requirement in CO01 i.e when the production order is created. Once the Production order is saved,
in CO01 the production Order data should be updated in a custom table. All this should be done in CO01.I tried to use the enhancement PPCO0007. But no use. Useful answers wll be rewarded.Please help..
Thanks & Regards,
Manjula.S

Hi Manjula,
I have searched all the exits. Actually I am not aware of this creation of production order. So, Just I am sending you the link you verify this and do some trail and error.
Actually the exit PPCO0007 what you have mentioned is correct. But, you go and search this link......
Re: User exit while creating a production order
Thanks,
Swamy Kunche

User Exit for CO11N to populate the Ref Order in Prod Order when Rework Ord

HI All,
I created a Production Order(100023) using TCode CO01 with 10 Qty.
When i am creating a Production Order confirmation using TCode CO11N, i Confirmed 9 Qty and 1 Qty for Rework Order, it is confirming the 9Qty and creating a new Production Order (100024) for 1Qty.
As per the requirement it is working fine. While system creating a Production Order (100024) for the Rework Qty, i need to populate the Reference Production Order number (100023) in the field Ref. Order in Control Data tab in the Production Order.
Can any one suggest me how to populate this field? Is this possible by any USER EXIT or BADI ?
Or Can we do it by configuration?
Regards,

Hey all: I already have solved it. This was solved using a batch input application: before is launched the MIGO transaction, we print the smartorm using ME38 transaction with SHDB.

Production Order BADi / user exit

Please can anyone suggest a BADi / user exit that can be used to pop up box after the save button is clicked in production order create (CO01)
Thanks
Edited by: MLockett on Oct 9, 2009 3:31 PM

Hi,
you can use the below exit...
PPCO0007 Exit when saving production order
Prabhudas

Production order user exit

I will create a production order in CO01.I wont use planned order,MRP etc.I will assign a WBS element in production orderin assignment tab.Then i will confirm the order and do goods receipt in MB31.When I do goods receipt my finished material should go to project stock.Is there any user exit for this.

dear colleague,
when you assign a WBS to a production order it is only a statistic assignment.
You have to create the PP order through the MRP in order to transfer the stock type through the requirement type or create the the production order in CO10.
Through CO10 the stock type will be 'project type'.This is the standard logic. There isn´t any user exit that allows to post in 'Q' stock and order created through CO01.
If you create in CO01 you have to move the stock through transfer movements.
best regards

User exit co01

Similar Messages

Maybe you are looking for