User exit code does not execute

I'm having a problem with User exit code that does not execute yet seems to be set up correctly.
The User exit is implemented as FM "EXIT_SAPLIPW1_001" in function group XQSM.
I've tried everything I know of with the CMOD and SMOD transactions, and I suspect some sort of transport error.
The only clue I can find in comparing the development system (which works) with the test system (which does not work) is that running "Extended Check" in SE80 on function group XQSM fails with the following error:
"The namespace of program SAPLXQSM has the setting "C" and cannot be tested."
Has anyone any idea what could have happened?

Let us try to retrace the steps.
1. You created a Z project in CMOD and assigned the enhancement IQSM0001 and the component EXIT_SAPLIPW1_001 and activated the same. This is there in the transport.
2. You double clicked on the include in the user exit and created it. You activated the code and included it in the same transport.
If you did the above steps, then your user exit should be active in your test system.
Can you please go to SE10, and list out the objects in your transport? You should see entries in there like below(not necessarily a complete list)
R3TR CMOD <your project name>
R3TR PROG ZXQSMU01
See if you created any of the objects as local objects.
Srinivas

Similar Messages

  • FRM-40800: User exit FND does not exist.

    Situation:
    I use Windows XP client - for development
    Forms [32 Bit] Version 6.0.8.28.0 (Production)
    The APPS server is on the Linux (RedHat):
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
    Apps version: 11.5.10.2
    What I dis:
    - installed Oracle Forms on Windows XP
    - loaded JTFGRDMD.fmb in Forms with APPSTAND.fmb, FNDSCSGN.fmb
    - loaded loaded all the PL/SQL libraries and recompile them for Windows
    When I run JTFGRDMD I receive no compilation error but when the form run, I receive "FRM-40800: User exit FND does not exist.".
    Does anybody have an ideea why I get this error ?
    Thanks, Paul
    Note: I tried to find information on Metalink and other threads, but nothing was good for me.

    Hi,
    Hussein, I agree with you. However I need to do a customization on the form and test it (on Windows) before deloying it to the apps server(on Linux).Do the customization at the client side, make sure the forms compile and run successfully, then copy the fmb file to the server and compile it. By doing this, you should be able to run the form from the application.
    Under Forms (on Windows) I connect using apps/apps.When you compile the form on the server side, you will have also to provide the apps username/password, so the concept is the same. Do you still have an issue when accessing the form after compiling it on the server? If yes, then obtain the FRD file and post the contents of the file here (search the forum for FRD 11i).
    Regards,
    Hussein

  • User Exit MEFLD004 does not work in ME21

    Hello,
        I want to modify the delivery date of a purchase order and I have seen that enhancement MEFLD004 is used to do that.
       I have created a project in CMOD, included the enhancement in the project, created the inckude ZXM06U54 but the system does not use the code.
       I put a breakpoint and the system does not stop.
        Any idea about what I am doing wrong?
        Do I have to customize something?
    Thank you,

    For ME21 you can use ZXM06U43  EXIT_SAPMM06E_012 or ZXM06U44 -EXIT_SAPMM06E_013.

  • User exit (PBO) does not work for IT0107 (Planned working time Belgium)

    Hello,
    I have written a simple code in program ZXPADU01 in order to default a field of IT0107 (part of IT0007 for Belgium). However, my field is not defaulted to the correct value.
    The problem seems to be a
    CLEAR P0107
    statement in module "default" of dynpro MP010700 (screen 0100):
      if psyst-ioper = insert and PSYST-IINIT = YES.          "XEOPH0K010351
        clear p0107.
        SELECT SINGLE * FROM T5B9G WHERE PERSG = P0001-PERSG
                                   AND   PERSK = P0001-PERSK.
        IF SY-SUBRC NE 0.
          CLEAR T5B9G.
        ENDIF.
        IF p0107-BESTE IS INITIAL.      "RIB12Jun01
          PERFORM READ_BESTE USING p0107-BESTE.
          IF p0107-BESTE EQ SPACE OR 549BRC NE 0.
            p0107-BESTE = T5B9G-BESTE.
          ENDIF.
        ENDIF.                          "RIB12Jun01
        IF p0107-BERGM IS INITIAL.      "RIB12Jun01
          PERFORM READ_BERGM USING p0107-BERGM.
          IF p0107-BERGM EQ SPACE OR 549BRC NE 0.
            p0107-BERGM = T5B9G-BERGM.
          ENDIF.
        ENDIF.                          "RIB12Jun01
        IF p0107-BEREG IS INITIAL.      "RIB12Jun01
          PERFORM READ_BEREG USING p0107-BEREG.
          IF p0107-BEREG EQ SPACE OR 549BRC NE 0.
            p0107-BEREG = T5B9G-BEREG.
          ENDIF.
        ENDIF.                          "RIB12Jun01
    *   Set defaults from features
        perform set_DefbyFeat using    p0007
                                    psyst-ioper
                                    psyst-iinit
                           CHANGING p0107.
      endif.
    Prior to the clear statement, table p0107 contains my default values, but the statement clears those values...
    Any idea how to solve this?
    Many thanks in advance!

    Problem is solved with OSS note 1376481.

  • CommandButton code does not get executed with partialSubmit=false

    Following code in Jdev11g
    <input type="text" value="#{myBacking.text}"/>
    <af:commandButton text="Click" action="#{myBacking.doSomething}"/>
    <af:commandButton text="Click" actionListener="#{myBacking.doSomethingElse}"/>
    public void setText(String value)
       System.out.println("Setting value");
    public String doSomething()
       System.out.println("Clicked");
        return "";
    public String doSomethingElse(ActionEvent e)
       System.out.println("Clicked with event");
    } I always get following output:
    Setting valueI never see the output from my commandButton. It seems that my button does not executes it's code but just notifies the components to call their setters.
    I notice that when i set the partialSubmit to true, de code do get executed.
    Why is that and what is causing this behaviour? How can i use my own code in the buttons without setting the partialSubmit to true? I do need a complete refresh of the page and can not use the partialSubmit but when it's set to false, it ignores my code...

    They are inside an af:form
    <?xml version='1.0' encoding='windows-1252'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
              xmlns:f="http://java.sun.com/jsf/core"
              xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <jsp:directive.page contentType="text/html;charset=windows-1252"/>
      <f:view>
        <af:document id="doc1">
          <af:messages id="m1"/>
          <af:form id="frm1">
               //MY buttons are here
          </af:form>

  • ERS user exit, pass Delivery note(LFSNR) in MIGO to Reference(XBLNR)in MIRO

    Hi Experts,
    I need to assign Delivery Note(LFSNR) in MIGO, to field Reference(XBLNR) in MIRO. that means "Reference " field must contain the delivery note information instead of Invoice doc number.
    how can i use component MRMH0001.where can i use?
    i am new to user exits.
    please help me. i need logic and steps.
    Thanks in advance
    Reward points will be given.
    Srinu

    hi
    Overview
    R/3 provides three "customization spots" that allow you to enhance FI/CO features without modifying the standard code. Although often collectively referred to as "user exits," two of the three have different names. SAP Enhancements are used to expand the standard functionality within SAP. Enhancements use function modules and are called from the standard SAP code. Each module in the system has a set of delivered enhancements that help companies expand the standard functionality where they need it. Enhancements were new in release 3.0.
    The Open FI Interfaces or Business Transaction Events are also used to expand the standard functionality within SAP. These events are defined in the IMG. Business Transaction Events were new in release 4.0. They are not available for all modules and are not called on all integrated transactions into FI as of release 4.5B. This will change with each release and should be retested.
    The older User Exits in FI/CO are "Z" programs that are defined in table T80D for client-dependent user exits, and in table T80I for client-independent user exits. These are also used to expand the standard functionality within the FI/CO modules. These User Exits have been available since the early releases of SAP. All of these FI/CO User Exits are listed in this document in the Configuring User Exits (Older). The list is included because these User Exits are not a part of the Enhancements or Business Transaction Events and do not have an Info System for searching.
    Benefits
    • Standard SAP functionality can be enhanced without modification to the standard code.
    • Upgrades do not erase the functionality and it does not have to be re-transported or re-entered into the system. The enhancements should be thoroughly tested when upgrading to ensure the system will still work as implemented.
    Configuring SAP Enhancements
    Basic Steps in Configuring an Enhancement
    • Find the appropriate Enhancement.
    • Enter the ABAP code in the "Z" program within the function module.
    • Create a project.
    • Add the Enhancement to the project.
    • Activate the project.
    Example Business Scenario for Enhancements
    Company A has a requirement to validate all customer master records created with a U.S. address. The U.S. entity reports on the industry field on the customer master. This is only a U.S. requirement and should not be required for the other countries, so the field status would not work. To accomplish this requirement, Company A will need to set up an Enhancement for the customer master transaction. The necessary steps are detailed below with screenprints. This example was configured in a 4.6C system.
    to find the suitable exit for ur requirements check the following program
    Hi
    Find the available exits with the following program:::
    *& Report  ZFINDUSEREXIT
    report  zfinduserexit.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
    select single * from tadir where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir where pname = tstc-pgmna.
    select single * from enlfdir where funcname =
    tfdir-funcname.
    select single * from tadir where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name eq enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    select * from tadir into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct where sprsl eq sy-langu and
    tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    write the code in the right form and check by keeping a break point
    HI
    To search for a badi, go to se 24 display <b>class cl_exithandler.</b>
    double click on method get_instance, get a break point on case statement.
    execute and start the required transaction in new session.
    look for variable <b>exit_name.</b> It would show the available badi's.
    also check the following links
    User Exit
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    <b>Please do reward if useful</b>
    Regards
    Dinesh

  • User or group does not exists.

    Hi,
    I am running an unattented installation of SQL on a server. I run it with the following configuration:
    ;SQLSERVER2008 Configuration File
    [SQLSERVER2008]
    ;************************* CORE ARGUMENTS *************************
    ; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance. 
    INSTANCEID="MSSQLSERVER"
    ; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter. 
    ACTION="Install"
    ; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
    online, Business Intelligence Development Studio, and other shared components.
    FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
    ; Setup will not display any user interface. ***
    QUIET="True"
    ; Needed argument for silent installation
    IACCEPTSQLSERVERLICENSETERMS="True"
    ;*************************** OPTIONAL *****************************
    ; Displays the command line parameters usage 
    HELP="False"
    ; Specifies that the detailed Setup log should be piped to the console. ***
    INDICATEPROGRESS="True"
    ; Setup will display progress only without any user interaction.
    QUIETSIMPLE="False"
    ; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system. 
    X86="False"
    ; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
    ENU="True"
    ; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature. 
    ERRORREPORTING="False"
    ; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature. 
    SQMREPORTING="False"
    ; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
    Services (RS). 
    INSTANCENAME="MSSQLSERVER"
    ; Agent account name 
    AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Auto-start service after installation.  ***
    AGTSVCSTARTUPTYPE="Automatic"
    ; Startup type for Integration Services. 
    ISSVCSTARTUPTYPE="Automatic"
    ; Account for Integration Services: Domain\User or system account. 
    ISSVCACCOUNT="NT AUTHORITY\NetworkService"
    ; The name of the account that the Analysis Services service runs under. 
    ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Controls the service startup type setting after the service has been created. 
    ASSVCSTARTUPTYPE="Automatic"
    ; The collation to be used by Analysis Services. 
    ASCOLLATION="Latin1_General_CI_AS"
    ; The location for the Analysis Services data files. 
    ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
    ; The location for the Analysis Services log files. 
    ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
    ; The location for the Analysis Services backup files. 
    ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
    ; The location for the Analysis Services temporary files. 
    ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
    ; The location for the Analysis Services configuration files. 
    ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
    ; Specifies whether or not the MSOLAP provider is allowed to run in process. 
    ASPROVIDERMSOLAP="1"
    ; Specifies the list of administrator accounts that need to be provisioned. 
    ASSYSADMINACCOUNTS=”CRB\dsstest”
    ; Startup type for the SQL Server service. 
    SQLSVCSTARTUPTYPE="Automatic"
    ; Specifies a Windows collation or an SQL collation to use for the Database Engine. 
    SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
    ; Account for SQL Server service: Domain\User or system account. 
    SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Windows account(s) to provision as SQL Server system administrators. 
    SQLSYSADMINACCOUNTS=”CRB\dsstest”
    ; Level to enable FILESTREAM feature at (0, 1, 2 or 3). 
    FILESTREAMLEVEL="0"
    ; Set to "1" to enable RANU for SQL Server Express. 
    ENABLERANU="False"
    ; Specify 0 to disable or 1 to enable the TCP/IP protocol. 
    TCPENABLED="1"
    ; Specify 0 to disable or 1 to enable the Named Pipes protocol. 
    NPENABLED="0"
    ; Startup type for Browser Service. 
    BROWSERSVCSTARTUPTYPE="Automatic"
    ; Specifies which account the report server NT service should execute under.  When omitted or when the value is empty string, the default built-in account for the current operating system.
    ; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
    ; The domain part of RSSVCACCOUNT is a maximum of 254 characters long. 
    RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Specifies how the startup mode of the report server NT service.  When 
    ; Manual - Service startup is manual mode (default).
    ; Automatic - Service startup is automatic mode.
    ; Disabled - Service is disabled 
    RSSVCSTARTUPTYPE="Automatic"
    ; Specifies which mode report server is installed in.  
    ; Default value: “FilesOnly”  
    RSINSTALLMODE="DefaultNativeMode"
    ; Full-Text filter launcher service account
    FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
    I run the installation with the user crb\dsstest, but i get the following error:
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message: 
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data: 
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack: 
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message: 
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Can anyone help me?

    Hi,
    I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
    The following are the error details:
    2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
    2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
    2011-12-28 12:58:47 AS: Action: Validating Account
    2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
    2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
    2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
    2011-12-28 12:58:47 AS: Result: Error
    2011-12-28 12:58:47 AS: Result: Invalid
    2011-12-28 12:58:47 AS: Result: (Validation) Complete
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
    2011-12-28 12:58:47 AS: Data:  Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
    2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Result: (Utility) Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
    2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
    2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
    2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
    2011-12-28 12:58:47 AS: Result: (Utility) Success
    2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
    2011-12-28 12:58:47 AS: Result: Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Validating Start Mode
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Action: Validating Allow in Process
    2011-12-28 12:58:47 AS: Data: AllowInProcess=1
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: ----------------------------------------------
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message:
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data:
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack:
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message:
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Do you need more information then above? The above chech do not fail for the network service:
    2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
    2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
    2011-12-28 12:58:46 ACE: Validating service account is not LocalService
    2011-12-28 12:58:46 ACE: Validating service account is a user account
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
    2011-12-28 12:58:46 AS: ----------------------------------------------
    2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
    2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
    Do you have any idea what is worong?

  • The material code does not exist or is not activated

    Dear All,
    I am using SAP ECC6. When I go through MM03 for certain material code, it gives the error: The material code does not exist or is not activated.
    But this code exists in MARA. There seems to be no problem in the fields of MARA.
    Where the problem can be?
    Regds
    Amit

    do you know when and how the material was created?
    Maybe the material is stored with a key that does not anymore fit to the customizing.
    In SE16 in menu Settings > user parameter   check if you have a flag in field conversion exit., if yes, then remove it  and display this material along with other materials that you can access with MM03 in one list.
    Check if the material number is different from the others (e.g. with or without leading zeros)

  • To differentiate in the user-exits what transaction has executed first

    Hi,
    I have a problem,
    For transactions Iw32 y iw34 EXIT_SAPLCOIH_006 user-exit  are called up  when a maintenance order is updated
    from any of two transactions.
    I want to differentiate in the user-exits what transaction has executed first (origin) because sy-tcode in both cases contains  iw32 ' because IW38 transaction calls UP always to the transaction iw32 for update of a maintenance order.
    thank´s
    Regards.

    If that is the case, and the IW32 is begin called from IW38 via some batch input mechanism, then maybe this code will work.  You can wrap your code in this IF statement.  Here we are saying that we only want to do this when the tcode is IW32 and it is not being called in batch input(call transaction) or called by another program.
    if sy-tcode = 'IW32'
      and sy-binpt = space
      and sy-calld = space.
    endif.
    Regard,
    Rich Heilman

  • Error Account user="demonw7\SAPServiceP71" does not exist. PI 7.1 EHP1

    Hi,
    I had error message during installation of PI 7.1 EHP 1, The error is
    RACE      2009-08-25 16:29:11.656 [synxcuser.cpp:2121]
               CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
    existence check for user demonw7\SAPServiceP71 returned false.
    INFO[E]    2009-08-25 16:29:11.656 [synxcuser.cpp:147]
               CSyUserImpl::CSyUserImpl(const CUserData&, bool)
               lib=syslib module=syslib
    FSL-01027  Account user="demonw7\SAPServiceP71" does not exist.
    TRACE      2009-08-25 16:29:11.671 [synxcuser.cpp:302]
               CSyUserImpl::CSyUserImpl(const CUserData&, bool)
               lib=syslib module=syslib
    Exception thrown near line 149 in file synxcuser.cpp
    Stack trace:
    iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
    d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
    iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
    synxcaccmg.cpp: 114: bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sNameOrSID)
    synxcaccmg.cpp: 88: PSyAccount CSyAccountMgtImpl::getAccount(ISyAccountMgt::eAccountType accountType, iastring sNameOrSID)
    synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
    syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="demonw7\SAPServiceP71", sid="", create=false)
    syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="demonw7\SAPServiceP71", sid="", create=false, ISyProgressObserver* )
    synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
    Please Advise ? do i need to create the user manually ?
    Best Regards
    Fernand Lesmana

    Hi Juan,
    I have checked and re-tried to install from beginning but now got another problem :
    ERROR      2009-08-26 10:21:10.437 [sixxcstepexecute.cpp:984]
    FCO-00011  The step doConfiguration with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|1|0|NW_MSS_DB|ind|ind|ind|ind|3|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0|doConfiguration was executed with status ERROR .
    TRACE      2009-08-26 10:21:10.468
    Instantiating new NWUsageTypeBasic
    Please advise
    Best Regards
    Edited by: Fernand Lesmana on Aug 26, 2009 4:59 AM

  • BW User Exit - Code in function of the query name

    Hi,
    I would like to create an user exit code which execute a algorithm different in function of the query executed. do you know in which variable is store the technical name of the query.
    CASE query
        WHEN 'Z_ZAPO_001'.
           V1 = 1
        WHEN 'Z_ZAPO_002'.
          V1 = 2    WHEN '10' OR '11' OR '12'.
    ENDCASE.

    Yaroslav,
    I_S_RKB1D-COMPID will never be filled for authorization user-exits (I_STEP = 0). Don't ask my why, I once raised this question to OSS and they replied it was never foreseen to work with authorization user-exits. God knows why, it's very unlogical and it wouldn't cost them a lot of work to get it working...
    I could solve this problem by applying a little trick. In our queries we included a user-exit keydate variable. This will push the user-exit first in I_STEP = 1 mode where I_S_RKB1D-COMPID is filled. Then save the query name by exporting it to the ABAP-memory. Afterwards, the user exit with code for I_STEP = 0 will be processed and then you can import the query name from the ABAP memory.
    I agree it sounds a little bit tricky but there is no better option I'm affraid.

  • User defined fields does not get added into database

    Hello Experts
                              User defined fields does not get added into database , when i click add button it
    shows data added sucessfully , but when i check data base no entry is made , only entry is made for
    B1 fields , like DocEntry ,DocNum etc.., no entry is made for U_fields..
    I have check every thing databound is also set to true
    Actually first few 6 data was added properly but now its not geeting added for user fields
    I have used 2 document row  child table for 2 matrix and for remaining Document table
    What might be the problem
    reply soon
    plz suggest

    Hello sir
    I have checked Default form , in that entry is made into database
    but running the form in screen painter in preview mode or through coding it does not get added for user field
    this id my binding code
    LoadFromXML("updateopd.srf")
                oForm = SBO_Application.Forms.Item("updopd")
                oForm.DataBrowser.BrowseBy = "txtpatid"
                'Adding combo in Obervation
                oItem = oForm.Items.Item("txtpatid")
                oEdit2 = oItem.Specific()
                oEdit2.DataBind.SetBound(True, "@UPDATE", "U_PID")
                oItem = oForm.Items.Item("txtmnane")
                oEdit3 = oItem.Specific()
                oEdit3.DataBind.SetBound(True, "@UPDATE", "U_FName")
                oItem = oForm.Items.Item("txtlname")
                oEdit3 = oItem.Specific()
                oEdit3.DataBind.SetBound(True, "@UPDATE", "U_LName")
    Plz suggest

  • Ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been

    I installed SSRS on an existing instance. Configured SSRS using report manager, loaded some reports and they work as expected.
    The problem is I can not launch(IE)  Report Manager UI due to error in description. I can launch the Report Manager IF I RUN IE AS ADMINISTRATOR. The details of error from SSRS log file listed below.
    The main page SSRS page starts to display. The display starts with "Home | my subscriptions |site Settings..." in upper right side, and "SQL Server Reporting Services" in upper left. Then the error displays
    User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient     permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
    Starting IE as administrator starts the Report Manager with out problems.
    Does anyone have suggestion, is more information needed?  Thanks, Joe
    library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetPermissionsAction(/).
    ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
    granted and Windows User Account Control (UAC) restrictions have been addressed.
       at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPermissionsAction().
    ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: HTTP status code --> 500
    -------Details--------
    Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
    have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)  
    at System.Web.UI.Page.OnInit
    (EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPropertiesAction().
    ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
       at System.Threading.Thread.AbortInternal()
       at System.Threading.Thread.Abort(Object stateInfo)
       at System.Web.HttpResponse.End()
       at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
    library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetPermissionsAction(/).
    ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
    granted and Windows User Account Control (UAC) restrictions have been addressed.
       at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetSystemPermissionsAction().
    ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: HTTP status code --> 500
    -------Details--------
    Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
    have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)  
    at System.Web.UI.Page.OnInit
    (EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    library!ReportServer_0-2!1c98!08/07/2014-16:19:00:: i INFO: Call to GetSystemPropertiesAction().
    ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
       at System.Threading.Thread.AbortInternal()
       at System.Threading.Thread.Abort(Object stateInfo)
       at System.Web.HttpResponse.End()
       at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
    library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch()
    library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Using folder N:\WFSLR_JOE\MSRS11.WFSLR_JOE\Reporting Services\RSTempFiles for temporary files.
    library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 1 snapshots, 4 chunks, 0 running jobs, 0 persisted streams, 4 segments, 4 segment mappings, 0 edit sessions.
    library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch() ends

    Hi Joseph_SQL,
    The following operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications: Windows Server 2012 R2, Windows 8.1, Windows 8, Windows Server 2012, Windows Server 2008 R2, Windows 7, Windows Server
    2008 and Windows Vista.
    Because the noted operating systems limit permissions, members of the local Administrators group run most applications as if they are using the Standard User account. To avoid open Report Manager in Internet Explorer always using Run as administrator option,
    we can refer to the following configuration steps:
    Add Reporting Services URLs to trusted sites.
    Report Manager Folder Settings
    Report Manager Site Settings
    For more details about how to configure the settings, please refer to the following article:
    http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx. After finishing the configuration, we can re-open Report Manager in Internet Explorer without using
    Run as administrator.
    Hope this helps.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • My calendar is stuck. i press 'done' and it stays as is.  I noticed this on my contacts also. it sometimes does not execute.

    my calendar is stuck. i press 'done' and it stays as is.  I noticed this on my contacts also. it sometimes does not execute.

    http://support.apple.com/kb/TS3281
    Apple does not respond here this is a user to user forum There are no Apple staff here
    Millions have updated without issue

  • User exit in VA01 not triggering on change of custom field

    Hello Guys,
    We have custom field in SO item (VBAP) for which screen 8459 of SAPMV45A has been enhanced. Now, on the change of the custom field, user exit USEREXIT_MOVE_FIELD_TO_ME_REQ is not getting triggered.
    Requirement is to change Purchase Requistion item (setting value of a EBAN field to custom field from 8459 screen) when a SO is created/changed.
    Can someone please help!
    Regards,
    Ashish
    Edited by: Ashish Kshatriya on Nov 4, 2009 8:00 PM

    Hi
    U can also to try to insert a new MODULE in the PAI of screen-exit where u call the user-exit USEREXIT_MOVE_FIELD_TO_ME_REQ or where u fill the header line of table EBAN just as what that exit does.
    U should remember the screen-exit is "yours", so u can insert all module u need, just only save them in the following include:
    - MV45AOZZ (PBO module)
    - MV45AIZZ   (PAI module)
    Max

Maybe you are looking for

  • Looking for a Business Partner that works with Collab Suite

    I am currently looking at various "collaboration" solutions on the market today. MS, Lotus, Oracle - in an effort to find the best for my company. The oracle is the only one that offers the Voice/Email integration...which is interesting for me...my q

  • Trying to determine if we need the Java stack for ERP 6.0 upgrade

    An issue we have regarding our research of a potential ERP upgrade to 6.0 has to do with the potential requirement to add the Java stack to the WAS engine that support our ERP.  This appears significant due to the impact on infrastructure requirement

  • Where can I find Creative Media Explo

    So, I bought a new computer, and now I can't find the CD for my Zen Vision M: 60 GB. Anyone can help me with this problem? Thanks in advance!

  • How does transfer handle between 2 scripts?

    Now I am buffering the Wimax signal by Agilent VSA, and then calculate the SNR by Matlab. Step1:Run Matlab script1 in Labview to execute "VSAsetting.m" file(Matlab file, configuration VSA):            "h = actxserver('AgtVsaVector.Application');" wil

  • Mac is freezing after installing mavericks

    My mac freezes (spinning color wheel) after about 10 minute of use.  I reboot and it still freezes.  Can't move anything, can't close programs or shut down the computer. Any ideas?