USER EXIT CODE In BEX

Friends,
In Bex query for an ODS,I need to create a report
-In the selection screen user has to enter one date value.(DATE1 Varible)
I need to get the values in the report based on following condition
==>DATE1 < DATE2.
As user defined variable can be used in one charcteristics only,I unable to include Date1 variable in DATE2 Restriction Option.
I will have to write the user exist for this?.If so pls help me with the user exist code.
Thanks in advance.
Soujanya

Hi,
Pls create a customer exit variable 'ZPDATE2' for DATE2(Clearing Date) with the code below and use it as apprpriate in the query together with DATE2.
What the code does is to transfer the value of the variable 'ZPDATE' to the variable 'ZPDATE2' (upon user entry of 'ZPDATE')
CASE I_VNAM.
WHEN 'ZPDATE2'. " Characterstic VARIABLE
    IF I_STEP = 2.
get variable value 'ZPDATE'
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
                   WHERE VNAM = 'ZPDATE'. " Current fiscal Period.
        CLEAR : L_S_RANGE.
*--- fill value ranges
        MOVE : 'I' TO L_S_RANGE-SIGN,
               'LT' TO L_S_RANGE-OPT.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDLOOP.
    ENDIF.    " for After pop-up
ENDCASE.
Hope this helps !

Similar Messages

BW User Exit - Code in function of the query name

Hi,
I would like to create an user exit code which execute a algorithm different in function of the query executed. do you know in which variable is store the technical name of the query.
CASE query
    WHEN 'Z_ZAPO_001'.
       V1 = 1
    WHEN 'Z_ZAPO_002'.
      V1 = 2    WHEN '10' OR '11' OR '12'.
ENDCASE.

Yaroslav,
I_S_RKB1D-COMPID will never be filled for authorization user-exits (I_STEP = 0). Don't ask my why, I once raised this question to OSS and they replied it was never foreseen to work with authorization user-exits. God knows why, it's very unlogical and it wouldn't cost them a lot of work to get it working...
I could solve this problem by applying a little trick. In our queries we included a user-exit keydate variable. This will push the user-exit first in I_STEP = 1 mode where I_S_RKB1D-COMPID is filled. Then save the query name by exporting it to the ABAP-memory. Afterwards, the user exit with code for I_STEP = 0 will be processed and then you can import the query name from the ABAP memory.
I agree it sounds a little bit tricky but there is no better option I'm affraid.

User exit code does not execute

I'm having a problem with User exit code that does not execute yet seems to be set up correctly.
The User exit is implemented as FM "EXIT_SAPLIPW1_001" in function group XQSM.
I've tried everything I know of with the CMOD and SMOD transactions, and I suspect some sort of transport error.
The only clue I can find in comparing the development system (which works) with the test system (which does not work) is that running "Extended Check" in SE80 on function group XQSM fails with the following error:
"The namespace of program SAPLXQSM has the setting "C" and cannot be tested."
Has anyone any idea what could have happened?

Let us try to retrace the steps.
1. You created a Z project in CMOD and assigned the enhancement IQSM0001 and the component EXIT_SAPLIPW1_001 and activated the same. This is there in the transport.
2. You double clicked on the include in the user exit and created it. You activated the code and included it in the same transport.
If you did the above steps, then your user exit should be active in your test system.
Can you please go to SE10, and list out the objects in your transport? You should see entries in there like below(not necessarily a complete list)
R3TR CMOD <your project name>
R3TR PROG ZXQSMU01
See if you created any of the objects as local objects.
Srinivas

User Exit Variable for Bex in CMOD (ABAP Code)

Hi Experts
My requirment is to develop a Restricted Keyfigure...
The restriction is based on 0Calmonth (Calendar Year/Month)
The sales from beginning of calendar year up to last "closed" month in a Calendar.
Ex: in June i want to see 01.01.2009 to 31.05.2009 data.
 in October i want to see 01.01.2009 to 30.09.2009 data.
When user execute the report
 in Jan 2010 i want to see 0 as there is no closed month in that particular year.
 in Fed 2010 i want to see 01.01.2010 to 31.01.2010 data.
For that purpose i need to create a User Exit variable in CMOD...
I am struggling to get an idea on how to write a code to meet the requirment
Please help me with code that i can use in cmod
Thanks in advance

Hi,
Use the following code :
when' variable name ' .
DATA : year(4) type n,
month2(2) type n,
date_in type sy-datum,
date_op type sy-datum.
IF I_STEP = 1.
CLEAR L_S_RANGE.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
month2 = sy-datum+4(2).
if month2 = '01'.
concatenate sy-datum+0(4) '01' '01' into l_s_range-low.
l_s_range-high = sy-datum.
else.
month2 = month2 - 1.
clear : date_in, date_op.
concatenate sy-datum+0(4) month2 '01' into date_in.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
EXPORTING
 DAY_IN = date_in
IMPORTING
 LAST_DAY_OF_MONTH = date_op
EXCEPTIONS
 DAY_IN_NOT_VALID = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
concatenate sy-datum+0(4) '01' '01' into l_s_range-low.
l_s_range-high = date_op.
endif.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
I dint know what output do you want if the current month is jan.
I have put it as 1st jan till current date.
Modify it if you need.
Regards,
Mansi

Funtion Module for user exits variables in BEx Queries.

Hi,
This is for BW Query customer exit variable (zvar2) for include ZXRSRU01 and exit :EXIT_SAPLRRS0_001.
Can anyone please suggest the function modules that can be used to do the following.
1)Read value of zvar1 from selection screen whatever
user enters at run time.
2)How to define the zvar2 in the include. zvar2 is the
variable created in BEx to be populated from this
customer exit.
3)How to use case statment where once the value for zvar1
is determined then,
   Case zvar1.
   when zvar1 = 0 , then zvar2 = 10
   when zvar1 = 1 , then zvar2 = 20
3) Assign zvar2 value as computed in the case statement.
Can anyone please help with the code to achieve this.
Any information regarding function modules that can help write user exits for variable reading and input will be greatly helpful.
Thanks
Sarah.

Hi Sarah,
You don't need any FM for your issue.
Please try thie sample code :
DATA: VAR_INPIUT LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'ZVAR2'.
   CLEAR L_S_RANGE.
   IF I_STEP = 2."PROCESSED AFTER VARIABLE INPUT
*Reading value of ZVAR1
    LOOP AT I_T_VAR_RANGE INTO VAR_INPIUT
      WHERE VNAM = 'ZVAR1'.
      CASE VAR_INPIUT-LOW.
*FILLING ZVAR2
       WHEN 0.
          L_S_RANGE-LOW     = 10.
       WHEN 1.
          L_S_RANGE-LOW     = 20.
      ENDCASE.
      L_S_RANGE-SIGN     = 'I'.
      L_S_RANGE-OPT      = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
      EXIT.
    ENDLOOP.
ENDIF.
ENDCASE.
Hope this helps
Joe

0FI_AR_4 Extractor Enhancement without user exit code Question

Hi
I have a requirement to enhance 0FI_AR_4 Extractor with below Fields from BSID:
Field     DataElement
PRCTR       PRCTR
VPOS2       NUM06
VBUND       RASSC
As per SAP Note: 410799, I am assuming I don't need to write any ABAP code to populate these fields.
In the extract structure DTFIAR_3 of extractor 0FI_AR_4 Double clicked on the Include CI_BSID.
It prompted "Structure CI_BSID not available. Create the structure?"
After entering Access key it created new Structure "CI_BSID".
I have entered the Component and Component Type values as below:
Component   Component Type
YYPRCTR     PRCTR
YYVPOS2     NUM06
YYVBUND     RASSC
1. Please let me know Component and Component Type values and the steps I followed are correct or not?
2. And I hope I don't need to write the code in the User exit to populate these fields?
Thanks
Sree

Hi,
For any FI datasource enhancement there are two scenarios :-
1. All the fields of the customer enhancement in the customer include are available in the read structure BSID
Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
2. Fields of the customer enhancement in the customer include are not contained in the read structure BSID
In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
Hope this helps.
Reg,
Rahul

EDI - IDoc - User Exit - Code - Problem - Help - Wanted

Hi EDI Experts,
I have extended ORDERS05 IDOC twice.
ZVKSEG1 is the the segment under extended idoc ZVKORDRS05. This is for one partner.
Z1DATESH01 is the segment under extended idoc Z1ORDER05. This is for another partner.
I have completed the configuration thing in WE82 for both the extensions.
Now the requirement is, whenever a PO is created for the first partner - 100290, the IDoc generated should contain the extra segment ZVKSEG1 and whenever PO is created for the second partner - 10099,the Idoc generated should contain the extrasegment Z1DATESH01.
Using WE20, i have added the extended IDoc type in both the partner profiles under ORDERS message type.
Now i've written the user exit for this using EXIT_SAPLEINM_002.
tables: edidc.
data: z_edidd like edidd occurs 0 with header line.
data: y1dath01 like z1datesh01.
data: yvkseg1 like zvkseg1.
if edidc-rcvprn = '10099'.
z_edidd[] = int_edidd[].
loop at z_edidd.
if z_edidd-segnam = 'E1EDK01'.
read table z_edidd with key segnam = 'Z1DATESH01'.
if sy-subrc <> 0.
y1dath01-DELDATE = sy-datum.
clear z_edidd.
z_Edidd-sdata = y1dath01.
z_Edidd-segnam = 'Z1DATESH01'.
append z_edidd.
endif.
endif.
endloop.
int_edidd[] = z_edidd[].
elseif edidc-rcvprn = '100290'.
z_edidd[] = int_edidd[].
loop at z_edidd.
if z_edidd-segnam = 'E1EDK01'.
read table z_edidd with key segnam = 'ZVKSEG1'.
if sy-subrc <> 0.
yvkseg1-name1 = 'ZVK Chemicals'.
clear z_edidd.
z_Edidd-sdata = yvkseg1.
z_Edidd-segnam = 'ZVKSEG1'.
append z_edidd.
endif.
endif.
endloop.
int_edidd[] = z_edidd[].
endif.
Could you please go through the code and tell me where did i go wrong. The extra segments are not being created for both the partners.
I created PO using ME21n once for each vendor.
Please help me out guys.
Thanks,
Matt

I myself fixed this problem. I made use of XLFA1-LIFNR to manipulate the partner numbers.
Thanks

Excluding idoc processing from user exit code

Hi all,
In a user exit (for VA01 Create Sales Order) we are currently excluding certain order types by hardcoding the document type in the code. This is because some orders are created by IDoc and in this case the IDocs fail if they use the eser exit code (because the code creates pop-up messages intended for online users only). Not the best solution.
Does anybody know if we can use different code so that this part of the user exit does not get triggered by IDocs?
Thanks,
Mike

I've figured out another solution - you can do a test on the field IDOC_NUMBER. If it is filled, then the sales order is created/changed via an Idoc.

How to see user exit code

hi,
i have one user exit name with me like EXIT_SAPLVxxxxx. how can i see it's code.
thks

Those user exits are build as function modules. Just goe to transaction SE37, put in the name and there you go. Double click on the include in the FM and you'll see the code. If the include doesn't exist this user exit has not yet been implemented.
Regards,
Michael

User exit code - help required

Hi Experts,
I need to write a user exit for the field Posting level in the query. The logic is ,when posting level is either 10 or 20 for an ITEM then Key figure "Period value GC" should be divided by two and the result shouls be stored in the same Key figure.
Technical names of the fields are as follows:
Posting Level - 0cs_plevel . We have created a user exit variable ZBSUSER.
Item - 0ITEM
Period Value GC - 0cs_per_gc.
Please let me know the code to be written in CMOD to achieve the above result.
Thanks,
Kavitha Jagannath

Hi,
I need to write a user exit for the field Posting level in the query. The logic is ,when posting level is either 10 or 20 for an ITEM then Key figure "Period value GC" should be divided by two and the result shouls be stored in the same Key figure.
You can do it in report it self you don't need EXIT CODE.
Steps:
1. Create a RKF and restrict (Include)ITEM = 10 and 20 & drag and dropn Period value GC " RKF -1
2. Create another RKF and EXCLUDE ITEM = 10 and 20 & drag and dropn Period value GC. " RKF -2
3. In Columns display both and create Formula-1 and divide RKF-1 with 2.
4. Create a Formula and add Formula-1 and RKF -2
5. Hide unwanted calculations
Your problem is resloved.
Thanks
Reddy
Edited by: Surendra Reddy on Dec 14, 2009 2:25 PM

User exit code required for manadatory variable

we have vendor in rows and sales in columns, the requirement is there is a mandatory variable for retrieving the sales between months, that is if
customer gives calmonth january as from and march as to the sales should be from Jan to March, if the customer only gives from month and nothing for to month, only from month should be calculated, if the customer gives only to month and no from month, the to month should be calculated. Remember the variable is mandatory.

Hi,
Let s say
var1 is from varaible
var2 is to variable
var3 is user exit variable
USe the code like this:
DATA:
l_s_range TYPE rsr_s_rangesid,
l_s_var TYPE rrs0_s_var_range.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
DATA: LOC_VAR_RANGE2 LIKE RRRANGEEXIT.
WHEN 'VAR3'.
 IF I_STEP = 2.
 LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
 WHERE VNAM = 'VAR1'.
 LOOP AT I_T_VAR_RANGE2 INTO LOC_VAR_RANGE
 WHERE VNAM = 'VAR2'.
 CLEAR L_S_RANGE.
 L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(8).
 L_S_RANGE-HIGH = LOC_VAR_RANGE2-LOW(8).
IF LOC_VAR_RANGE2(8) = '00000000'.
 L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW(8).
ENDIF.
IF LOC_VAR_RANGE(8) = '00000000'.
 L_S_RANGE-LOW = LOC_VAR_RANGE2-LOW(8).
ENDIF.
 L_S_RANGE-SIGN = 'I'.
 L_S_RANGE-OPT = 'BT'.
 APPEND L_S_RANGE TO E_T_RANGE.
 EXIT.
 ENDLOOP.
 EXIT.
 ENDLOOP.
 ENDIF.
With rgds,
Anil Kumar Sharma .P

Hierarchy BW User Exit code EXIT_SAPLRSAP_004 ZXRSAU04

Hi All,
We are loading Hierarchy data in BW using User Exit by taking data from master dat InfoObject.
As we thought it's working fine; but on every 2nd load it's getting failed (1st load is success, 2nd load failed, 3rd load success likewise; so every alternate load is getting failed). We tried with all the options in Infopackage.
As per our assumptions and the requirement we could able to load the data through user exit.
We need your help in the following code where we are missing or we are missing some process in BW.
We request you please give us suggestions ASAP.
thanks in Advance.
*& Include ZXRSAU04
data:y_i_/BIC/PYIOSID type standard table of /BIC/PYIOSID,
 y_wa_/BIC/PYIOSID type /BIC/PYIOSID,
 lwa_upmode type char1.
data:y_i_/BI0/HCRM_OBJ_ID type standard table of /BI0/HCRM_OBJ_ID,
 y_wa_/BI0/HCRM_OBJ_ID type /BI0/HCRM_OBJ_ID,
 y_wa_hienode type RSAP_S_HIENODE.
data:y_I_table like standard table of C_T_HIENODE.
data: y_v_active type char1.
data:y_v_n(8) type n.
*refresh C_T_HIENODE[].
case I_DATASOURCE.
when '80CRM_OBJ_IDH'.
To load the data from YIOSID master data into 0CRM_OBJ_ID hierarchy
 delete C_T_HIENODE where nodeid ne '00000001'.
 select single *
 from /BI0/HCRM_OBJ_ID
 into y_wa_/BI0/HCRM_OBJ_ID
 where nodeid = '00000002'.
 if sy-subrc eq 0.
 move:C_T_HIENODE[] to y_I_table[].
 refresh C_T_HIENODE.
 move y_I_table[] to C_T_HIENODE[].
 refresh y_I_table[].
 CALL FUNCTION 'RSHIER_HIER_SUBTREE_DELETE'
 EXPORTING
 I_HIEID = y_wa_/BI0/HCRM_OBJ_ID-HIEID
 I_DEL_IOBJNM = y_wa_/BI0/HCRM_OBJ_ID-IOBJNM
 I_DEL_NODENAME = y_wa_/BI0/HCRM_OBJ_ID-nodename
I_DEL_DATETO =
 EXCEPTIONS
 FOREIGN_LOCK = 1
 HIERARCHY_NOT_FOUND = 2
 CANCELED = 3
 OTHERS = 4
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 else.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
 delete C_T_HIENODE where nodeid ge '00000002'.
 commit work and wait.
 wait up to 15 seconds.
 CALL FUNCTION 'RSHIER_HIER_CHECK_AND_ACTIVATE'
 EXPORTING
 I_HIEID = y_wa_/BI0/HCRM_OBJ_ID-HIEID
 IMPORTING
 E_ACTIVE_STATE = y_v_active
 EXCEPTIONS
 CANCELED = 1
 OTHERS = 2.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 wait up to 3 seconds.
 else.
 commit work and wait.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
 ENDIF.
 endif.
 endif.
 select *
 from /BIC/PYIOSID
 into table y_i_/BIC/PYIOSID.
 if sy-subrc eq 0.
 sort y_i_/BIC/PYIOSID by /BIC/YIOSID OBJVERS.
 endif.
 if y_i_/BIC/PYIOSID[] is not initial.
 move: '0HIER_NODE' to C_T_HIENODE-IOBJNM,
 'OPP_NUM' to C_T_HIENODE-NODENAME,
 '00000002' to C_T_HIENODE-NODEID,
 '02' TO C_T_HIENODE-TLEVEL,
 '00000001' to C_T_HIENODE-PARENTID,
 '00000001' to C_T_HIENODE-childid.
 append C_T_HIENODE.
 move:
 '0HIER_NODE' to c_t_foldert-IOBJNM,
 'OPP_NUM' to c_t_foldert-NODENAME,
 'E' to c_t_foldert-langu,
 'OPP_NUM' to c_t_foldert-txtsh.
 append c_t_foldert.
 loop at y_i_/BIC/PYIOSID into y_wa_/BIC/PYIOSID.
 if y_wa_/BIC/PYIOSID-/BIC/YIOSID is not initial.
 if y_wa_/BIC/PYIOSID-/BIC/YIOSID gt 2.
 move: '0CRM_OBJ_ID' to C_T_HIENODE-IOBJNM,
 y_wa_/BIC/PYIOSID-/BIC/YIOOBJ to C_T_HIENODE-NODENAME,
 y_wa_/BIC/PYIOSID-/BIC/YIOSID to y_v_n,
 y_v_n to C_T_HIENODE-NODEID,
 y_wa_/BIC/PYIOSID-/BIC/YIOTLEV TO C_T_HIENODE-tlevel,
 y_wa_/BIC/PYIOSID-/BIC/YIOPLEV to y_v_n,
 y_v_n to C_T_HIENODE-PARENTID.
 append C_T_HIENODE.
 endif.
 endif.
 endloop.
 endif.
endcase.
*ROSHIENODE

Hi!
I had the same problem during this user exit run.
When load failed a new dump DBIF_RSQL_INVALID_CURSOR appeared.
My problem appeared because system was loosing cursor during a SELECT...ENDSELECT run.
I made my SELECTs smaller and everything become fine.
SDN gives some notes:
SAP Note Number: 1124093 70SP17: Extraction terminates with DBIF_RSQL_INVALID_CURSOR
SAP Note Number: 401847 DBIF_RSQL_INVALID_CURSOR during extraction
SAP Note Number: 675 Unexpected abends in SELECT loops (COMMIT)
Hope it helps.

Hi user exit code required

hi all,
      i have one requirement i.e when ever we give tcode xd06 or xd02 if customerno is there it wont accept the same customer again if customer is not there it has to insert the customer into the table. i require code for this requirement i need to write this in include called ZXF04U01and function module name is EXIT_SAPMF02D_001.
Write below custom code inside the user exit to capture CRSID information in reverse mapping input table ZW2CTREV_MAP to trigger reverse mapping.
Declare a work area WA_ZW2CTREVMAP of type ZW2CTREV_MAP.
Assign values from I_KNA1 to work area WA_ZW2CTREVMAP.
MODIFY TABLE ZW2CTREV_MAP FROM WA_ZW2CTREVMAP.
above i have shown procedure for code. send me the actual code what i have to write in include to check customer and insert customer pls reply as early as possible.
regards
sagar

Hi,
Let s say
var1 is from varaible
var2 is to variable
var3 is user exit variable
USe the code like this:
DATA:
l_s_range TYPE rsr_s_rangesid,
l_s_var TYPE rrs0_s_var_range.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
DATA: LOC_VAR_RANGE2 LIKE RRRANGEEXIT.
WHEN 'VAR3'.
    IF I_STEP = 2.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
        WHERE VNAM = 'VAR1'.
      LOOP AT I_T_VAR_RANGE2 INTO LOC_VAR_RANGE
        WHERE VNAM = 'VAR2'.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(8).
        L_S_RANGE-HIGH = LOC_VAR_RANGE2-LOW(8).
IF LOC_VAR_RANGE2(8) = '00000000'.
        L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW(8).
ENDIF.
IF LOC_VAR_RANGE(8) = '00000000'.
        L_S_RANGE-LOW = LOC_VAR_RANGE2-LOW(8).
ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
      EXIT.
      ENDLOOP.
      EXIT.
      ENDLOOP.
    ENDIF.
With rgds,
Anil Kumar Sharma .P

How to debugg remodeling user exit code?

hi all,
did any body debugg the User Exit for Remodelling a cube?
Regards,
Nagesh Ganisetti.

Hi Nagesh,
I have never used remodelling exit tool but just an small regular idea,as we are using IF_RSCNV_EXIT interface exit for remodelling if you keep 'break-username' or 'break-point' in between your code ,when you started processing your remodelling I think that process will get stopped at that beak point.
Regards,
KK

Creating User Exit Variable in BeX

Hi All,
Urgent help required.
I need to create User Exit for a variable which reads value from other variable value which user enter during pop up.
Ex: I need get value for the vaiable "ZACTFY" from the variable value "ZSCENARI". Value of this ZSCENARI will be like
200684
200693
200757 ....
where 2006, 2007 specify year of the forecast value and from (200684) the value 8 refers to 8 months actual & 4 refers to 4 months plan values.
So if ZSCENARI is 200684 the value for the variable ZACTFY should be in interval. i.e Range for low value should be 001.2006 (always month is Jan and year taken from first 4 digits of ZSCENARI) and hight value should be 008.2006.
No need to worry about plan values for scenario 200684 plan value will be there only for last 4 months.
1. Can any one tell me how to do coding for this(pls let me know including declaration).
2. Also if the value for ZSCENARI is Multiple single values lets say the user enters as 200684,200693,200657.. Pls tell me how we can do coding for this.
Thank You.
Best Regards,
Bhuvana.

Hi,
CASE I_VNAM.
WHEN 'ZACTFY'.
   IF I_STEP = 2.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
        WHERE VNAM = 'ZSCENARI'.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
        L_S_RANGE-LOW+4(2) = '01'.
        L_S_RANGE-high = LOC_VAR_RANGE-LOW(4).
        L_S_RANGE-high4(2) = LOC_VAR_RANGE-LOW4(1).
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDLOOP.
    ENDIF.
With rgds,
Anil Kumar Sharma .P

USER EXIT CODE In BEX

Similar Messages

Maybe you are looking for