User exit:Customer order-profit center

Dear friends,
While creating customer order, after ı fill customer and material SAP brings profit center automatically.
I think this situation is related to user exit.. Can anyone please tell me which user exit it is?
Regards,

Hello,
The Profit center is derived from material master plant view . the determination as described by you is from standard functionality.
if you are using a WBS element, it would be derived from the WBS elements org parameters
hope this helps
Thanks
Akasha

Similar Messages

  • User exit to populate profit center in production order change (CO02)

    Hello,
    The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
    Is there a user exit /BADI that can acheive this requirement?
    Thanks a lot for your advise.
    Joe

    Hi,
    Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
    HEADER_EXP-PRCTR
    Thanks,
    Shailaja Ainala.

  • DBM Order - Profit Center Control

    Hi,
    We are facing an issue in DBM Order Profit Center Control (/DBM/CO_PCA).
    The business scenario is explained below:
    1) Multiple material groups exist (Ex. Accessory, Parts, Service..)
    2) Multiple distribution channels exist (Ex. New Car, Accessory Sales, Parts Sales, Vehicle Service...)
    3) Multiple Order reasons exist (Ex. Paid Service, Free Service, Body Repair, Repeat repair...)
    4) Multiple Profit Centers (PC) exist (Accessory PC, Service PC, Parts PC....)
    Business requirement is that based on the material groups selected in the order, the relevant profit center should be hit.
    We have configured the settings in /DBM/CO_PCA to fulfill this requirement.
    Ex.
    Plant   Dist. Channel   Division   Order Reason    Material Group         Profit Center
    up01      15                   10                                          LABOR                     PN1NC01WPS
    up01      15                   10                     ACCESSORY           PN1NC01WPA
    up01      15                   10                     SPARES                   PN1NC01WPM
    However, when an order is generated, the relevant profit centers are not being hit. Instead, the profit center defined in first line of every group is getting hit for all material groups. In the example listed above, irrespective of the material group selected in the order, only the profit center "PN1NC01WPS" is getting hit.
    Can someone assist us in resolving this issue.
    Thanks & regards
    Prahlad G Rao

    Dear sir,
    /DBM/SH_PART_MARA check this user exit for search help of the material in DBM order .. material group filed is called in transaction there here you need to append and write your own code that material with material group for order type have to pick a Profit centre.
    Regards,
    Kaustubh

  • Internal order profit center change

    Hi sap gurus,
        I want change the internal order profit center but when iam changing the profit center the below message is coming
    You changed the profit center; see long text
    Message no. KO367
    Diagnosis
    You have changed the profit center from 1110-P to 1610-P. This is only allowed when the corresponding configuration was made in Customizing. Then this message is only a warning, which you can ignore.
    Procedure
    If you want to make it possible to change the profit center, you should change this message from an error message into a warning. To do this choose Adjust message control (Application area "KO", message number "367").
    When you change the profit center, the last period should be settled and since then no more postings should have been made.
    Notes
    Order values can already have been updated on the profit center you are assigning to. For the new assignment, only the new order values on the profit center you are now assigning to are posted.
    If an order is assigned to a profit center and the "Integrated Planning" indicator is set, plan costs can be updated in the future on the old profit center.

    Hi,
    Changing profit centre assignment to internal order has certain consequences, which are partially listed in the message. So, the system gives you a choice to forbid this kind of action or allow by making the message only a warning. If you want to do so, go to OBA5 transaction, enter the 'KO' as application area and change the parameters for 367 message.
    Regards,
    Eli

  • How to find the user exit for order cancellation

    I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
    I have got a Zreport where this order should not come as open order item.
    Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
    In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
    My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
    Regards.

    hi
    pls tell me t.code so that i will send all user exits related to that particular t.codes
    Thanks & Regards
    phaneendra

  • A/R balance report by Customer by Profit center (Document split activated)

    Dear New-GL gurus
    I activate New-GL splitting.
    For clearing, it seems clearing will be done by not split profit center level.
    Thus, if I’d like to see “A/R balance by Customer by Profit center”, I cannot see.
    (In BSID or BSAD, profit center is blank, but in faglflexa, profit center is entered by document split)
    Is there any report to see it?
    Yoshi

    Hi Yoshi,
    Use mentioned report where you can see PC wise outstanding
    S_AC0_52000887 - Receivables: Profit Center
    Regards
    Mani Kumar

  • Version Change in User Exit , Customer Exit, Screen Exit

    Hi All,
    If Version change then whether the user exit, customer exit & screen exit will remain same? or what needs to be done for that?.
    Regards,
    Abhijit

    Hi,
    as per my knowledge there is no effect in the user exit ,in generally when version change the screens are chenges for particular transaction not the user exit .
    Regards,
    Madhu

  • Restriction of Users to access other Profit Center Data

    Hi All,
    We have a Ztable to maintian User Id and Profit Center ranges (from to).
    This well help us to enter an user id and a Profit Center range in the Ztable.
    Later this particular User will be having access to only these (mentioned in the Ztable) Profit Centers while doing any Transaction.
    But how exactly this User will get such restriction..????
    I believe something has to be done apart from entering such details in the Ztable.
    What exactly should be done, so that the User will have access to particular set of Profit Centers...??????
    Kindly guide me in this regard.....
    Regards
    Pavan

    Hi,
    Contact your basis consultant.....he may be able to help you with the authorisations.
    Aravind
    Assign points if helpful

  • URGENT: user exit& customer exit

    hi every body,
                     pls let me know the difference between USER EXIT& CUSTOMER EXIT.and How& What Type of the TICKETS are received in realtime.is there any tool for receiving the tickets in SRM.
    Generally how many USERS are must for implementing the SRM project in real time.
    which implementation scenario is best for INDIA?&Why.
    i am requesting the GURUS please send me the detailed answers asap...............points will be rewarded soon.
    thanks
    warm regards
    rakhi

    Hi,
    For difference between USER EXIT& CUSTOMER EXIT,see this very good related thread:
    Re: user exit  vs customer exit
    BR,
    Disha.
    Do reward points for useful answers.

  • Where we can find out customer related profit center assignment.

    Hi gurus
    where we can find out customer related profit center assignment.
    Thank you
    i will assign points.

    Hi,
    Sure you can find that, but before that you need to run F.5D and 1KEK for transferring customer detail to profit center.
    After that you can this report S_ALR_87013343 - Profit Center: Receivables.
    SJ

  • User exit: sales order  VA01: Customer number

    Hi friends,
    While creating Sales order, before saving the document, I need to check the Customer (Sold to pary?) details in KNEX table. KNEX-KUNNR KNEX-TDOCO KNEX-DHRCO. if condition fails, I need to display an error message V1525,
    which should contain
    1)customer(sold-to -party?KNEX-KUNNR)
    2)partner function PARVW (VBPA-PARVW?)
    3)country LNDEX KNEX-LNDEX
    Functional spec says, 1)V45A0002
    2)V45A0003
    3)V45S0001
    4)V50EPROP User exits can be levaraged.
    1)triggers before we enter customer (sold-to-party) in VA01. so may not be used.
    2)V45A0003: i am able to fetch KUNNR, LNDEX(land1), and able to validate KNEX Fields.
    But I need to fetch partner function (PARVW), which exist in VBPA , KONP etc tables. But I am not able to write the query, which sould have all the primary keys of the table.
    Please help me the way.
    i) the above user exits can be used?if not, help me with user exit name.
    ii)if yes, how to fetch PARVW ..as all the primary keys must be used in the select query.
    Please help me ASAP.

    You can try with the form USEREXIT_SAVE_DOCUMENT or USEREXIT_SAVE_DOCUMENT_PREPARE in the program MV45AFZZ (this program contains the userexits for SD).
    You can access work aread VBAK and internal tables XVBAP, XVBPA with latest data for that transaction.
    Regards,
    Naimesh Patel

  • USER-EXIT - sales order, credit block

    Moderator message: moved to correct forum.  In future please use meaningful subject.
    my requiremnet is, Delivery for an sales order should be created even if it is a credit block i.e even the credit check is unsuccessful the order should be deliverd when we deliver the order from salesdocument->deliver.
    i need a user-exit for this to put this check.
    can ne one help me.
    regards,
    pavan,

    Hi,
    According to Std SAP if in case credit mgmt is activated system will check for credit limit for that customer before delivery.You will be trying to change the std scenario which is not advisable.
    However,
    Try user exit MV45AFZZ & in that
    FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
    Also check other exits related to delivery & credit mgmt from
    SPRO->Sales & Distr-> System Modifications->User Exits
    and check out the documentation part next to each exit in that category.
    Regards,
    Amit

  • ABAP: SD user-exits - custom fields using from KNVV or VBAK

    Hi all,
    I have a technical question.
    I've created some custom fields in table KNVV. The values of these custom fields have to be used during Sales Order creation/modification for determining materials or princing, in sales order user-exits.
    My question is:
    During the Sales Order creation/modification, in the userexits:
    Is it preferable to get directly the values of the custom fields from KNVV?
    OR
    Is it preferable to transfer values of the custom fields from KNVV to VBAK (which was extended with the same custom fields like KNVV...) with transfer data, and then use only VBAK?
    Thanks in advance for your answers.
    Have a nice day!

    Anderton,
    I would prefer moving them to VBAK and then using it. Why?
    1. Once you have queried KNVV and moved it to VBAK you do not have to perform the select again.
    2. During SO change, you already have the data in VBAK so you do not have to fetch again from KNVV.
    3. Lets say the Z field was changed on KNVV after creation of SO and if your requirement is to use the Z field content when the SO was created, you cannot go back to KNVV since the data is changed. But if the same was stored in VBAK, you do not have that problem.
    Thanks,
    Vikram.M

  • Service master user exit to populate work center description

    Hi experts,
    In IW31 work order, I need a user exit to populate the work center description to PR delivery address for control key PM03 with Service Master.  I have tried and search in vain for other BADI or user exit but none works.
    Is there anyone have solution on this?
    Thanks.
    Regards
    PSK

    My abaper has tried a few IWO1_PREQ_BADI, IW010009 and WORKORDER_UPDATE.
    Operationally, user require the work centre address as the delivery address of the services due to the company has 24 physical workshop locations.
    Anyway, will also try to create the fields in AUFK table as recommended.

  • VL01N - User Exit to substitute Profit Centre value field

    Hi Guru,
    In the VL01N transaction (Outbound Delivery) I'm looking for a user exit to substitute the Profit Centre derived from a standard procedure by SAP, with another value.
    Can you suggest me the user exit normally used to do it?
    Thanks

    Hi,
    User exits for  VL01N transaction code
    V02V0001  Sales area determination for stock transport order
    V02V0002  User exit for storage location determination
    V02V0003  User exit for gate + matl staging area determination (h
    V02V0004  User Exit for Staging Area Determination (Item)
    V50PSTAT  Delivery: Item Status Calculation
    V50Q0001  Delivery Monitor: User Exits for Filling Display Fields
    V50R0001  Collective processing for delivery creation
    V50R0002  Collective processing for delivery creation
    V50R0004  Calculation of Stock for POs for Shipping Due Date List
    V50S0001  User Exits for Delivery Processing
    V53C0001  Rough workload calculation in time per item
    V53C0002  W&S: RWE enhancement - shipping material type/time slot
    V53W0001  User exits for creating picking waves
    VMDE0001  Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002  Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003  Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004  Shipping Interface: Message SDPACK (Packing, Inbound)
    Regards,
    Madhu

Maybe you are looking for