User Exit for adjusting Transfer Order Quantity
Hi All,
We have a requirement to create a Transfer Order as soon as the production order is released. We have done the configuration for the same but we also need to adjust the Transfer Order quantity based on certain rounding value maintained in material master.
We have tried to use the exit MWMPP001 to adjust this quantity on the Transfer Order based on a field in material master. The user exit is triggered. But the target quantity is not changed as required.
We also tried using the exit MWMTO006 (Over delivery and if Necessary Under delivery Via User Exit) to adjust the TO quantity. But the exit is not being invoked.
Kindly let us know if there is any user exit or BADI to adjust the quantity in Transfer Order.
Regards,
S.Subasree
Hi Subasree,
We are facing the similar problem of user exit(EXIT_SAPLL03A_009) in the enhancement MWMTo006 is not getting invoked.
We want to use this enhancement to split the TO quantity basing on certain parameters maintained in master data. We are using Lean WM.
But, I understand from my development team, that program is checking the available stock at quant level. It will invoke the exit only if the stock available at quant is greater than the TO quantity. I didn't understand why this check is there in ECC6.0.
Currently we are using the same exit in 4.6b, where this check is not there in the code.
If you have found any solution for this(Invoking the exit) please let us know. Thankyou.
Regards
Guru
Similar Messages
-
User exit for Stock transfer order
Hi,
My requirement is : i want to create a Stock transport order in which i have to set an error message based on the Document type and receiving plants country name.
Say for an e.g. if my doc type is STPO and plant is pl10(which belongs to Germany)then no error will come, but if
doc type is STPO and plant is pl11 ( which does not belongs to Germany) In that case error has to occur.
I want to put the logic in the code.
Kindly provide me program name and user exit where i can implement this.
Regards
Utsavhi
Please discuss with ur technical consultant and given ur functional need in Functional spec form for user exit .
In that u have to mention eaxactly what u need i.e ur requirement regarding the user exit for STO process.
So it can be done with ABAPer with you as functional consultant.
Thanks
SAP_MM -
User Exit for Va01[ Return Order ]
I Have Written User Exit for Va01[ Return Order ] in MV45AFZZ,
I'm Making tax field VBAK-TAXK1 as 0 when making this field as 0 Pricing Condition Tax calculation should not be exit and tax value must be 0.
How to do this process...plz give me a solution.Hi
For price calculations or modifications, you may have to write the code in SD routines. Check this T.code VOFM.
Reward if it helps!
Krishna -
User exit for changing Sales order lines.
Hello experts ,
I want to delete the field "ROUTE" from all of the orders lines in sales orders, I have been using "USEREXIT_SAVE_DOCUMENT_PREPARE" but it does not seems to do the job.
What is the name of user exit that i have to use for this task and which structure should be used, is it xvbap ? is it vbap ?
Thanks for the help.
Avi.Hi,
find the user exit u required.
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
Best regards,
venkatawamy.y -
User Exit for third party order processes.Missing in ECC 6.
Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Could anyone please let me know how I can resolve this issue as I need this User exit for my requirement. Has SAP provided any enhancement spots for this?
I tried to search the enhancement spots and OSS notes but couldnu2019t get any useful information.
Please advice.
Thanks,
Ameeshachanged our requirement
-
BADI or EXIT for pick transfer order
Hi GURU ,
Can anyone please tell me the BADI or EXIT name for PICK Transfer order.
Now the line item is coming in the Article wise , But I want this in BIN wise .
Please tell me the BADI or EXIT name where I can change the order of line item .
Edited by: Julius Bussche on Dec 16, 2008 2:29 PMhi
you can try these customer exits
MWMTOAU1
MWMTOAU2
hope it helps
regards
Aakash Banga -
User Exit for MIGO(Transfer Posting)
Is there any user exit for transfer posting by MIGO?
if so plz give the names of user exits related to it.....
Awaiting for ur reply..............USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MIGO Goods Movement
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
No of Exits: 8
Rewards if useful.........
Minal -
Search user-exit for create purchase order
Hi all,
i'm searching the user-exit (or BADI) for create purchase order.
Thanks for help.Hi CECG,
GOTO SMOD and press F4
then Click on Information system
and in the Package name give as ME
and press enter.
you will get all user exits for Purchase Orders
Hope this solves your problem.
Please reward points if found helpful.
Thanks and regards,
Rajeshwar. -
Regarding user-exit for customer return order in sales order creation
Hi,
My problem is when sales order type ZRE(Customer return) is created with refrence to Invocie i have to check the quantity in the return order is less than the original invoice or not.If quantity in return order is greater than invoice quantity then i have to raise error message.For this which user-exit is suitable in sales order program SAPMV45A.
Thanks,
shyla kumarHi
Use can use MV45AFZZ AND MV45AFZB userexits
Within mv45afzz USE CAN form related to VBAP or
save_document_prepare.
Please reward if useful. -
User exit to change purchase order quantity
Hi all,
when we create production order based on that service purchase requisition is created. based on that in me21n service purchase order is created and now if we do any change will be changing the production order qty after creating the order that is reflecting in service purchase requisiton but not reflectiing in me21n purchase order number so can u suggest me which enhancement to use and which user exit should be used to acheive this functionality i have tried using ppco0012 enhancement by keeping break point but when running the scenario it is not going to debug mode.
Regards,
Naveen
Moderator Message: Previous warnings from Moderator ignored. Account sent for deletion.
Edited by: kishan P on Dec 1, 2010 9:47 AMHi,
You may use USEREXIT_MOVE_FIELD_TO_ME_REQ.
You can find this in include MV45AFZB.
<REMOVED BY MODERATOR>
Regards,
Sharad
Edited by: Alvaro Tejada Galindo on Jul 21, 2008 12:37 PM -
User exit for create delivery order
hi! expert.
i have a scenario when user B create delivery order (VL01N) then get DO No. I want to send this DO No. to user A 's mail.
when i look for user exit with this [program|http://wiki.sdn.sap.com/wiki/display/ABAP/FindEXITandBADIfroagivenTransactionCode] . i don't know which one I should use. please suggest me.
V02V0001
V02V0002
V02V0003
V02V0004
V50PSTAT
V50Q0001
V50R0001
V50R0002
V50R0004
V50S0001
V53C0001
V53C0002
V53W0001
VMDE0001
VMDE0002
VMDE0003
VMDE0004
my SAP version is 4.6
best regards,
KiitisakHi,
Any userexit asks the access key for first time.(Not the case with customer exits). So no probelm. Get the access key from your BASIS team and implement the exit. I wonder that MV50AFZ1 is not implemented yet in your system. Is your SAP system new?
This is the most busy exit (Locked by some one at any time) in most of the systems:)
Thanks,
Vinod. -
User Exit for PO (Purchase Order) Change
Hi,
I want to know the SAP Standard User Exit that is triggered ONLY during changing / modification of PO(Purchase Order).
Thanks in Advance.
RKME_PROCESS_PO_CUST
use above BADI for ME22N/ME21N,often we use method PROCESS_HEADER
PROCESS_ITEM our most of the requirement meet by these methods only,check once if your requirement does meets with these two methods?
if not than you may implement some more method which are in ME_PROCESS_PO_CUST, for more help you may read documentation,there is well enough documentation already there for each method.
and for ME22/ME21 you may use
ME_PURCHDOC_POSTED
and method POSTED. -
User exit for contract release order.......
Hi All,
I have a question...
when we create a sales order and type the sold-to party the system dispalys(pop-up screen) the open contracts against the customer. It is up to us wheather we can copy any one of the contacts into the sales order and create a release order or we can just cancel the pop-up screen and create a new sales order with out reference to a sales order.
<u>HERE my requirement is as follows</u>.
1) <b>When a customer has open contacts and validity period we should make user to copy any one of the the existing contracts in the pop-up screen.</b>
2) <b>At the same time if the customer has got no contracts against him he should be allowed to cerate a plain sales order.</b>
I have tried with user exit Change document & User exit Save document in include <b>MV45AFZZ</b> but our code (user exit) should fire before or at the time of pop-up screen(containing the open contracts against the customer) which is just not happening.
Has any one of you came across of any solution for this kind of scenario...
One last option i have got is to disable the close push button taking the access key and changing the standard code........but this will effect the other places where this close button is used.
Please let me know how to go about it.
Thanks in advance......for your valuable time & precious knowledge.
With regards,
<b>Pavan</b>Have you tried applying code to EXIT_SAPLV46H_001 - Customer Function When Creating Item?
Or EXIT_SAPLV46H_002 - Customer Function for Partner Changes? -
User Exit for VA01: Maximum Order Qty
Dear All,
I have a requirement of restricting the total order qty in the Sales order for a particular order type. I am using exit V45A0003. In this I have put a check on the material qty and have given an error message if it exceeds the permissible limits. However, as soon as the error message is generated, the system gives an abend message saying the Item is not created. Kindly let me know how to handle this.
Also for using the include mv45afzz and form USEREXIT_SAVE_DOCUMENT_PREPARE the system asks me for an access key. I believe this is an exit and access key would not be required for this.
Regards
Anurag AgarwalHi
Access key necessary to implement the function exit like MV45AFZZ. But be careful while coding in to the MV45AFZZ.
If you want to check the order Qty you should write the code in to the perform called Transfer value to VBAP table.
This will helps you out
Regards,
Hiren -
User Exit For Production Order Confirmation Using CO15 or COGI
Hi all,
I need user exit for the production order confirmation so that i can set
AFPO-ELIKZ and AUFM-ELIKZ (delivery completedu2019 status flag) to Blank......
Thankshi,
check these exits.
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 PS confirmation: Determine customer specific default values
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. selection
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when saving
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default values
CONFPM02 PM/SM order confirmation: Customer specific input checks 1
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
use the exit which contains both structures AFPO,AUFM.
Maybe you are looking for
-
New Mac Pro quad 8 - This is great! PS CS3 at 200 MPH
Well, I have my new quad 3.0 Mac Pro up and running - and it is great. I purchased the quad 8 3.0 at an Apple Store - with 2 optical drives, 1 GB (4 X 512), the Radeon X1900 video card, and a single 250 GB hard drive. It was a bundle and the only way
-
Center text in Pages to E-Pub Export.
I have been doing a bit of playing around with exporting files in Pages to e-Pub. Also through searching these forums I have found many that have had issues with getting text to remain centered in their books. What I have found is that it might be a
-
iPhoto won't finish an import without crashing or even when I'm just browsing the library it crashes unexpectedly. This has happened on rare occasions in the past, but now it won't stay open for more than five minutes. I've got over 11,000 photo's in
-
Step by step procedure to start and stop ASM database.
Hi All, could any one tell me the steps to start an ASM database manually in windows ? derick
-
Validating the number of columns
Hi Guyz, how can i validate the number of columns in the custom table with number of columns in flat file.. at the moment ive uploaded all the data in flat file to internal table. plz advise.. Thanks