User exit for changing operation scap in PP order
Hi,
I want to know user exits for changing operation scrap in PP production order. Please help
Regards
Shalini
I could found only one at the moment...
QEVA0002 - Calculation of share of scrap in inspection lot
check if it is helpful.....else u can go on
CMOD - Utilities - SAP Enhancements - (Remove Maximum No of fields) - Execute (F8)
You will get all user exits.
Now i need points.... :)...My score is not gettin increased... lolz
kapil
Similar Messages
-
User Exit for Changing G/L account in Accounting Document
hi all,
This one is urgent for me. If you guys can help.
Iam looking for a user-exit to change the G/L account while posting the accounting document.
If someone has worked on a similar user-exit Kindly help.
Thanks and Regards
VarunHi Experts,
The requirement is to change the GL account when PGI is done for a delivery.
I have coded in the above user exit for changing the GL account. I am facing the issue here.
I am changing the GL account through a user exit, but even before the user exit is called the standard SAP is throwing a error.
the Error is GL account is blocked for posting in the company code. This check is happening for the GL account what standard SAP proposes from the customization. The GL account that is getting picked is blocked in SPRO for posting in the mentioned company code. Because of the error message, our z code is not getting executed.
Kindly suggest if some user exits that can be used even before this error message. or let me know if you have any suggestions to over come this.
I have coded this in the enhancement point. Include MM07MFK0_KONTIERUNG_PRUEFEN and subroutine kontierung_pruefen.
Thanks, -
Is there any user exit for changing V1 field value?
Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-IHi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco -
User-Exit for changing Sales Document Number - Urgent
Hi Experts ,
Please suggest me the <b>User Exit for changing Sales Document Number.</b>
thanks,
Jayesh<b></b>hi jayesh,
chech this exit-----EXIT_SAPFV45S_002.
this exit's description says " Change Sales Document Using Configuration".
Other available exits are
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
Reward me if useful..........
Harimanjesh AN -
USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT
Hi,
Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
Regards,Hi,
There is another user exit for updating material document data Upon posting is MB_CF001
I hope this will fullfill you.
Prem -
NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER
I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
THANKS/Hi Malka,
It's possible set the system to mark automatically the delivery completed indicator.
First you need to set the under delivery and over delivery tolerances.You do this in customizing:
Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
Once you set this, you can insert this value keys on Material Master Record for the materials.
When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
Regards,
Rodrigo -
PPCO0007 User Exit for Changing Header Fields During Order (CO40)
.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí HuertaHi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record. -
Badi or user exit for changing currency INR to EUR
hi friends,
in po header there is one tab called status.
in this tab there is one field called delivery payment
which has curr INR but i want to change that INR CuRR
to EUR.Can any one tell me how do this is there any badi or user exit
for this req.
thanks.Hi Sonu,
Use the following program to find out the appropriate user exist for ur transaction:
REPORT ZGURU_USER_EXIT_FIND .
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Then u can use the function CONVERT_TO_LOCAL_CURRENCY to change the amount from INR to EUR.
Regards,
Himanshu -
User exit for changing Sales order lines.
Hello experts ,
I want to delete the field "ROUTE" from all of the orders lines in sales orders, I have been using "USEREXIT_SAVE_DOCUMENT_PREPARE" but it does not seems to do the job.
What is the name of user exit that i have to use for this task and which structure should be used, is it xvbap ? is it vbap ?
Thanks for the help.
Avi.Hi,
find the user exit u required.
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
Best regards,
venkatawamy.y -
User exit for change PO (me22n) for save header and item text.
Hi Experts,
I have a requirement to read the header texts/item text at run time .
please tell me is there any save user exit for tc me22n .
Thanks in Advance.
PareshTransaction Code - ME21N Create Purchase Order
Exit Name Description
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
No of Exits: 35
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal -
User Exit for Changing ATP Checking group
Hi All
I am new to this area. I have a requirement to change the ATP Checking Group and ATP: Product availability check to new value.I was looking out if theres any specific user exit for this .Any pointers would be highly appreciated.
Thanks
AmrutaHello, still I do not have clearcut idea of business process for changing ATP group?
However i have understood that u want to influence selection of ATP group in the process.
In case u want to retain it for longer period, then u may use EXIt in cif which is called during transfer of Product master. With this u can have predefined value of ATP group as per your requirement.
Else you may change the ATP group in R/3 prior to ATP calls to APO. U may use exit "EXIT_SAPLATPC_001" in program " AVAILABILITY_CHECK_CONTROLLER". I am not sure which all prameters u can change in this exit
Please test in detial before finalizing the design
Regards
Mangesh A. Kulkarni -
User exit for contract start date in sales order change mode.
24.10.2008
Hi Gurus,
I need to disable the 'contract start date' (VEDA-VBEGDAT) field in Contract data tab at header and item level. Can someone suggest a user exit for the same ???
Regards,
UdaynathDear Udyanath,
Please check these User exits with the help of ABAPer
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document
processing are listed below.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen
fields.
To do this, the screen fields are allocated to so-called
modification groups 1 - 4 and can be edited together during a
modification in ABAP. If a field has no field name, it cannot be
allocated to a group.
The usage of the field groups (modification group 1-4) is as
follows:
- Modification group 1: Automatic modification with transaction
MFAW
- Modification group 2: It contains 'LOO' for step loop fields
- Modification group 3: For modifications which depend on check tables or on other fixed information.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document
header level. It is described in the section "Transfer of the
customer master fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document
item level. It is described in the section "Copy customer master
fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of
the sales document schedule lines.
The user exit is called up at the end of the FORM routine
VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer
master fields into sales document".
The user exit is called up at the end of the FORM routine
VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali. -
User exits for delivery picking confirmation and transfer order creation
Hi
We have a scenario for which we need help.
This is to do with replenishment from plant to plant.
We have sales sets.
The sales sets needs to be replenished from one plant to another. We want the componenets of the sales sets to picked from the issuing plant. For this we need a transfer order. this needs tobe confirmed and then the goods issue should take place from the issuing plant. Its a two step process.
we are doing Sales sets in STO. The explosion takes place in STO. However when we create deliveries for this. Only the sales set header item without its components are flowing into the delivery.
The Tranfer order does not contain the components either.
However post the goods issue we can create a TO with reference to the TR. This is is not acceptable because we want the picking and confirmation to occur before PGI from the issuing plant.
Could anybody help: We want the TO to be created with the components even though in the delivery only the Sales set header appears. Can u suggest a user exit in which when we create the TR from the delivery the components of the set.
After confirmation of the TO then we want the picking status to be put as C.
SupreethHi,
Check the following users exits.
MWMRFSSG user exit for sorting TOs in RF system-guided transaction
MWMRFUP Customer defined general purpose pushbutton called from scr.
MWMRP001 Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002 Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003 Customer Exit for Replenishment using RLLNACH1
MWMRP004 User Exit for Replenishment using RLLNACH4
MWMTO001 Enhancements for end of transfer order generation
MWMTO010 Exit: Calculation of Total Planned TO Processing Time
MWMTO011 Correction of Planned Processing Time for TO Item
MWMTO012 Correction of Sorting and Split Transfer Order
MWMTO013 Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3 Separate selection of posting changes for autom.TO creation
MWMTR001 Exits at the end of transfer rqmnt creation (IM,PP interf.)
MWMD0001 Transfer order print via RLVSDR40
MWMD0002 Transfer order print as multiple process with RLKOMM40
MWMIDI07 Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11 Enhancement for message WMTORD: TO with several items
MWMIDO12 Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13 Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001 Enhancement WM/PP Interface (automatic TR generation)
Regards,
Murali -
User exit for updating delivery block of Sales order before Delivery
Hi Folks,
Need to have an user exit for updating Delivery Block indicator for a Sales order Before creating its delivery
I have got an exit in Program SAPMV45A
MV50AFZ1
FORM USEREXIT_REFRESH_DOCUMENT.
that hits before processing the delivery block fro delivery (Correct me if i m wrong with this )
Now i want now how to change the Delivery Block indicator of Sales order in that exit
any FM available ?
Thanks n regards
Sonal...Hi ,
How did you solved this issue?
I am having similar scenario in which while pressing the save button delivery block should update if multiple schedule line exist.
Tried by two different approaches in various user exit without any success.
AFAIK we have two ways to achieve this functionality.
1) Count the no of rows in vbep. If greater than 1 then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
This is not correct. If there are two line items both with single schedule line . This case total no lines in vbep will 2 and above condition will true which is incorrect.
2) There is a indicator for multiple schedule line (VBAPD-EPMEH , xvbap-epmeh ) if it is check then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
If I write code in USEREXIT_SAVE_DOCUMENT_PREPARE.
Multiple schedule line indicator is not populate so can not use 2nd approach.
If I write code in USEREXIT_SAVE_DOCUMENT it of no use as vbak is updated before reaching this user exit.
If I write code in USEREXIT_MOVE_FIELD_TO_VBAK as this user exit is also called while pressing the enter key for this I have use
the condition of fcode but it also fails in some condition.
If fcode eq 'SICH'.
Read table xvbap with key epmeh = 'X'.
IF SY-SUBRC = 0.
VBAK-LIFSK = '03'.
Else.
VBAK-LIFSK = ' '.
Endif.
Endif.
Please help me to get the desired functionality working for all cases.
1) One line item with multiple schedule line
2) Two line item with multiple schedule line
3) One line item having one schedule line and second one having multiple
4)Two line item both with single schedule line. -
Need a user exit for Export Control check in Sales Order fro VA01/VA02
Hi ,
I need a user exit for Export Legal Control process in Sales Order.since Ship-to country in the Sales Order is not always the ultimate destination country User Exit needs to be built in with following logic
1. Check to see if ultimate destination country field is maintained in Sales Order
2. If a value is maintained then for the Export control checks use ultimate destination country instead of the Ship-To country (step 1)
3. If no value is maintained then use Ship-To country as default
The user exit is called when the user creates or changes a Sales Order.
Can anybody help ?
ThanksHi,
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001 Activating Sourcing Subitem Quantity Propagation
<b>Reward points</b>
Regarsd
Maybe you are looking for
-
Is there a way to set pixels at 20ppi?
I'm using AI to produce tactile graphics [for the blind] on a 20dpi dot-matrix embosser. With so few available dots, aligning elements with the pixels is essential for consistent lines. I know how to set up a new doc for pixels, align with pixels, pr
-
Photostream - error occurred while joining the Photo Stream
I have read/tried out the suggestions from other users with the same issue but I am unable to resolve my issue. I originally was able to join the Photostream on all my devices. On the Mac, suddenly I was no longer connected to iCloud. I eventually ma
-
Photoshop not responding when opening files.
I can create new files just fine but when I try and open an existing file, Photoshop CC locks up and has to be forced down. Anyone else having this problem?
-
Hello, I just bought QuickTime 7 Pro because it allows you to save streamed video. We have a live camera feed to the web of our meeting room and I want to be able to save the stream as a QuickTime Movie. I right click the movie on my web browser and
-
TS3694 how to find this solution?
how i find this solution in iphone 3g .. i need help to recover this.