User exit for checking creation of prod. order reference to sales order?
Hi all,
What are user exit suitable for checking creation of prod. order reference to sales order to have the same plant. If plant not the same, an error message should appear.
thanks.
Hi,
user exits:
PPCO0003 Check exit for order changes from sales order
PPCO0007 Exit when saving production order
Regards,
Vivek
Similar Messages
-
User Exit for Updating Delivery Plant at Item Level in Sales Order
Hello Experts
There is a requirement to determine the delivery plant for each item level and than update the items with newly determined plant. There is a user exit MV45AFZZ routine FORM USEREXIT_MOVE_FIELD_TO_VBAP. to update the item level entries in Sales Order in VA01 or VA02. Is this the right place to do this?, if yes , do i need to perform any other standard logic (like re determine Shipping points , schedule lines ) for newly determined plant? If not , can you please suggest any other place , BADI or user exit to change the delivery plant of sales order.
Thanks a lot....
-HarkamalBest place is MV45AFZZ-USEREXIT_SAVE_DOCUMENT_PREPARE. Populates the values just before saving the document. You can have your own deriving logic. Make sure that peice of code is trigger only for Sales Order create or change (VA01/VA02).
Are you kidding??? You do realize that this is AFTER all validations against configuration, ATP, pricing, etc. have been performed??!!! Never, ever change a critical value like plant in the SAVE user exits... -
User exit for checking the vendor emailid in me22n or me21n
hi all,
can anybody suggest me a user exit for checking the email id of the vendor in me21n or me22n or me29n.
plz suggest me a solution its urgent.hi yaan,
i checked with the user exit that u suggested me, it is getting triggered, i am able to check whether the vendor email id is present or not, but this is happening all the time that is even when the user dont want to send a email to the vendor i.e. he just wants to print the purchase order, even at that time this user exit is getting triggered and giving a message that the vendor email id is not maintained.
the reson why this is happening is there is no import parameter to this user exit which gives the "medium of data transfer" the user has entered. if i get this parameter visible inside the user exit, then i can check this parameter inside the user exit and do the required operation. i checked up with all the user exits in "me" package and even the other related packages but none of them is getting triggered,
do u know a user exit or badi which imports this parameter and also gets triggered at the time of creation of purchase order.
plz give me a solution.
regards,
santosh. -
BAdI: or User Exit for Campaign Creation IN CRM 5.0
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshIN WHICH TRANSACTION U R CREATING CAMPAIGN ??
-
BAdI: or User Exit for Campaign Creation
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshDear Ganesh,
As campaign can be created and executed individually also, it will never check for higher level project ID.
Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan. -
User Exit for Delivery Creation
Hi,
I am looking for an User Exit for Delivery Creation, which should provide a Sales Order Number. This is required before Batch determination. Can any one help.Hi,
I think you can try with MV50AFZ1 user exit.
In move fields to LIKP and LIPS routine you can get the sales order.
LIPS-VGBEL gives the sales order.
Thanks,
Rohan -
User Exit for checking Purchase Requisitioner Field in CJ20N Transaction
Hi,
I want user Exit for checking Purchase Requisitioner field while making PR through CJ20N transaction. I have trie EXIT_SAPLEBND_001 user exit. Problem in this user exit is I am not getting Purchase Requisitioner No & Item No in I_CEBAN
structure.
Please suggest what to do ?
Regard's
ShabbirHi,
You can check with this BADI ME_PROCESS_REQ_CUST.
Kindly refer below mentioned link for further details:
Badi ME_REQ_POSTED For CJ20N Transaction
Hope this will help you.
Regards,
Mudita -
User exit for incoming PO - (PO is created by CIFing TLB order to R/3)
Hi All,
I need to find out the APO INBOUND user exit for reciving the PO information from the connected R/3 system. Initially a TLB order is created in APO and CIFed to APO and after the PO is created in connected R/3 system this PO number and related information is CIFed back to APO and this TLB order is replaced by the R/3 PO number.
Please help me outto gain full points.
Thanks in Advance,
Chandan DubeyHi,
I am not clear with ur query and therefore check out the list of Inbound and outbound Idoc user-exits:
IDoc Inbound User Exits
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
IDoc Outbound User Exits
72. ACCONF
Confirmation of IDoc processing from the application
ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73. ACLPAY
Accounting: Inbound invoice
ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74. ACPJMM
Posting in accounting from materials management
ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76. BLAORD
Purchasing contracts
MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77. BLAREL
Purchasing contracts
MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78. COND_A
Conditions: master data for price determination
VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81. DELPKB
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82. DIRDEB
Preauthorized withdrawal
FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87. FIDCMT
Sending single items for FI-GL
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88. FIPAYM
Payment data
FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90. GSVERF
Cred. memo procedure
MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92. INFREC
Purchasing info record
MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93. INVOIC
Invoice / Billing document
LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94. KANBAN
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96. MATMAS
Material Master
MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100. PAYEXT
Extended payment order
FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101. PICKSD
Picking data confirmation to customer delivery
VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102. PRDCAT
Product Catalog
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103. PRDPOS
Product catalog item
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104. PRICAT
Price list / catalog
VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106. REMADV
Payment advice
FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107. REQOTE
Inquiry
VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108. SRCLST
Source List
MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109. SRVMAS
Master data service master
BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110. SYPART
Partner profiles
SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111. TPSDLS
Shipping planning system: Transfer delivery
V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112. WBBDLD
Assortment list: Material data
WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113. WMCATO
Reversal/Reversal request for transfer order
MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114. WMINVE
Inventory count input
MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115. WMRREF
Release reference number
MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116. WMTORD
Transfer order
MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117. WP_EAN
POS interface: Upload / Download EAN assignments
WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118. WP_PER
POS interface: Upload / Download person data
WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119. WP_PLU
POS interface: Upload / Download material master
WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120. WPDCUR
POS interface: Download exchange rates
WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121. WPDNAC
POS interface: Download products
WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124. WPDTAX
POS interface: Download tax rates
WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125. WPDWGR
POS interface: Download material group master
WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127. WTADDI
Additionals
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128. WTADDI_CVB1
Additionals w/o 06
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
Link for the same:
http://erpgenie.com/abaptips/content/view/302/62/
Pls reward helpful points.
Regards,
Ameet -
User exit for SO creation while changing the net price for item
Hi folks,
Is there any user exit or BADI to change the net price in the item label of Sales order??
My req. is that--- i need to change the net price of sales item if the cond type is 'ZUR1 ?
how can i achive this?
Regards
pabiHi
The user exits and badis for va01 tcode:
Enhancement/ Business Add-in Description
Enhancement
V45L0001
SD component supplier processing (customer enhancements)
V45E0002
Data transfer in procurement elements (PRreq., assembly)
V45E0001
Update the purchase order from the sales order
V45A0004
Copy packing proposal
V45A0003
Collector for customer function modulpool MV45A
V45A0002
Predefine sold-to party in sales document
V45A0001
Determine alternative articles for product selection
SDTRM001
Reschedule schedule lines without a new ATP check
V60F0001
SD Billing plan (customer enhancement) diff. to billing plan
V46H0001
SD Customer functions for resource-related billing
V45W0001
SD Service Management: Forward Contract Data to Item
V45S0004
Effectivity type in sales order
V45S0003
RP-relevance for incomplete configuration
V45S0001
Update sales document from configuration
V45P0001
SD customer function for cross-company code sales
Business Add-in
BADI_SD_SCH_GETWAGFZ
Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001
SD Customer functions for resource-related billing
If it is helpful rewards points
Regards
Pratap.M -
User Exits for Invoice creation ,cancellation and sales return
Hi Gurus,
Pl help me it's very urgent.
I did not find any user exit invoice creation so i wrote the following code in include program
MV60AF0B_BELEG_SICHERN.
This code is to update the Z*table while saving invoice ,cancellation and sales return.
The code modification is like below
FORM BELEG_SICHERN *
Buchen Fakturabelege *
FORM BELEG_SICHERN.
READ TABLE XVBRK INDEX 1.
IF SY-SUBRC NE 0.
CALL FUNCTION 'DEQUEUE_ALL'.
MESSAGE S032.
EXIT.
ENDIF.
IF SAMH_MOD = ON.
EXPORT XKOMFK TO MEMORY ID 'SDBILLDL'.
ENDIF.
DATA: CALC_TYPE.
IF REBATE_DETERMINED = 'Y'.
CALC_TYPE = 'A'.
ELSE.
CALC_TYPE = 'I'.
ENDIF.
*{ INSERT RD1K903017 1
Work Area*********************
data : wa_xvbrk type VBRKVB.
data : wa_xvbrp type vbrpvb.
data : wa_zmigo type zmigo.
data : wa_vbrp type vbrp.
Internal table Creation*******
DATA: BEGIN OF tab_XVBRP OCCURS 100.
INCLUDE STRUCTURE VBRPVB.
DATA: END OF tab_XVBRP.
data : begin of tab_vbeln occurs 10,
vbeln type vbrk-vbeln,
knumv type vbrk-knumv,
end of tab_vbeln.
data : tab_zmigo type table of zmigo.
data : tab_vbrp type table of vbrp.
*****Data declaration*************
data : v_no_of_inv type i.
data : v_vbeln_no(10) type n.
data : v_last_inv_no(10) type n.
data : v_first_inv_no(10) type c.
data : v_tot_qty type i.
data : v_frbnr type mkpf-frbnr.
*******Ranges*********************
ranges : r_vbeln for vbrk-vbeln.
*****Populating IT****************
tab_xvbrp[] = xvbrp[].
describe table xvbrk lines v_no_of_inv.
*} INSERT
CALL FUNCTION 'RV_INVOICE_DOCUMENT_ADD'
EXPORTING
VBSK_I = VBSK
WITH_POSTING = 'A'
PREISFINDUNGSART = CALC_TYPE
IMPORTING
VBSK_E = VBSK
TABLES
XKOMFK = XKOMFK
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBSS = XVBSS
XVBRK = XVBRK
XVBRP = XVBRP
XVBPA = XVBPA
XKOMV = XKOMV.
*{ INSERT RD1K903017 2
data : v_count type i,v_fkimg type i .
data : v_no_of_records(10) type n.
wa_xvbrk = xvbrk.
********Selecting the last rec no from ZMIGO
select max( sr_no ) from zmigo into v_no_of_records.
*****If Distribution channel is not ZB*********
if wa_xvbrk-vtweg ne 'ZB' and ( wa_xvbrk-fkart = 'ZRIN' or wa_xvbrk-fkart = 'ZRTE' ).
if v_no_of_inv = 1. " Process only when there is one invoice
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
endloop.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
clear v_no_of_inv.
else. "When there are Split Invoices
v_last_inv_no = wa_xvbrk-vbeln.
v_vbeln_no = v_last_inv_no - v_no_of_inv + 1.
v_first_inv_no = v_vbeln_no.
sort tab_xvbrp by vbeln.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg .
v_fkimg = v_fkimg / 1000.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = v_vbeln_no. "wa_vbrp-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-mblnr = wa_xmkpf-mblnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-bill_lno = v_frbnr.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = v_vbeln_no.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '601'.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo.
at end of vbeln.
v_vbeln_no = v_vbeln_no + 1.
endat.
clear : v_count,v_fkimg,wa_zmigo.
refresh tab_zmigo[].
endloop.
endif. "End of first 2nd IF.
clear : v_no_of_inv, v_vbeln_no.
endif.
****************Sales return************************************
if wa_xvbrk-fkart = 'ZRRE' and wa_xvbrk-vtweg ne 'ZB'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
wa_zmigo-mtype = '651'.
condense wa_xvbrk-xblnr.
wa_zmigo-reference = wa_xvbrk-xblnr.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg, v_frbnr.
endloop.
endif.
*******Invoice Cancellation*****************************
if wa_xvbrk-fkart = 'ZRS1' and wa_xvbrk-vtweg ne 'ZB'.
delete tab_xvbrp[] where shkzg eq 'X'.
loop at tab_xvbrp into wa_xvbrp where ( matnr ne 'CDGSTP0001' and
matnr ne 'CD-RW' and
matnr ne 'CD-RW65OHS' and
matnr ne 'CABLE' and
matnr ne 'CD-R' and
matnr ne 'CDQ80N4' and
matnr ne 'GENERAL' and
matnr ne 'NERO' and
matnr ne 'OTHERS' and
matnr ne 'SPARE PARTS' and
matnr ne 'PROMO ITEM' and
matnr ne 'PROMO-1' and
matnr ne 'PROMO-2' and
matnr ne 'PROMO-3' and
matnr ne 'PROMO-4' and
matnr ne 'PROMO-5' and
matnr ne 'PROMO-6' and
matnr ne 'PROMO-7' and
matnr ne 'PROMO-8' and
matnr ne 'PROMO-9' and
matnr ne 'PROMO-10' ).
v_fkimg = wa_xvbrp-fkimg.
v_fkimg = v_fkimg / 1000.
v_tot_qty = v_tot_qty + v_fkimg.
do v_fkimg times.
v_no_of_records = v_no_of_records + 1.
wa_zmigo-sr_no = v_no_of_records.
wa_zmigo-po_no = wa_xvbrk-vbeln.
wa_zmigo-item_no = wa_xvbrp-posnr.
wa_zmigo-doc_type = wa_xvbrk-fkart.
wa_zmigo-posting_date = wa_xvbrk-fkdat.
wa_zmigo-created_on = sy-datum.
wa_zmigo-created_time = sy-uzeit.
wa_zmigo-material = wa_xvbrp-matnr.
wa_zmigo-inv_no = wa_xvbrk-vbeln.
wa_zmigo-inv_item_no = wa_xvbrp-posnr.
wa_zmigo-plant = wa_xvbrp-werks.
wa_zmigo-inv_date = wa_xvbrk-fkdat.
wa_zmigo-customer = wa_xvbrk-kunag.
wa_zmigo-unit = 1.
condense wa_xvbrk-zuonr.
wa_zmigo-reference = wa_xvbrk-zuonr.
wa_zmigo-mtype = '602'.
********Bill of lading no**
select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
if sy-subrc eq 0.
wa_zmigo-bill_lno = v_frbnr.
endif.
insert into zmigo values wa_zmigo.
enddo.
clear : wa_zmigo,wa_xvbrp , v_fkimg.
endloop.
endif.
clear : v_no_of_records.
*} INSERT
CALL FUNCTION 'STACK_RESET'.
R185D-DATALOSS = SPACE.
FOLGEAUFRUF102 = SPACE.
PERFORM SETPAR_INIT.
*{ INSERT RD1K903017 3
*} INSERT
LEAVE.
ENDFORM.
This program is working fine for single user but in production where no of people are creating the invoices from different places the data is not getting updated in table ZMIGO.
sometime populating with wrong data , partial data and sometimes no updation at all.
I have used the table locking system enqueue and dequeue FM's before n after updation but still the same
thing is happening.
What could be the reason.
Looking for help very urgent any other alternate option.Hi,
Go thru these..
Enhancement
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line (transfer to accounting)
SDVFX003 User exit: Cash clearing (transfer to accounting)
SDVFX004 User exit: G/L line (transfer to accounting)
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX006 User exit: Tax line (transfer to accounting)
SDVFX005 User exit: Reserves (transfer to accounting)
Business Add-in
SD_CIN_LV60AU02 BADI for billing
If it is helpful rewards points
Regards
Pratap.M -
User Exit for employee creation
Hi,
I want to know the user exit which is called whenever the employee is created and employee number is generated.
I found one user exit as below:
EXIT_SAPMP50A_001
Is it correct?
Please advise.
Regards
Manish JaiswalHi Manish,
PFB the correct user exits for the same.
EXIT_SAPFP50M_001 - Customer Default Values for Personnel Administration and Rec
EXIT_SAPFP50M_002 - Customer Checks for Personnel Administration and Recruitment
Regards
Bala -
User exit for VT01n (Creation of shipment)
Hii All
We have a requirement where we have to automatically enter the planned shipment scheduled time & end time and date for each stage while saving the shipment.
Can anyone let me know user exit which can be used to do the same.
Thanks & Regards
GauravHi,
You can use V56FSTAT this user exit for your purpose..
If you want more selection of user exits you goto transaction SMOD and input V56* and then press F4,so that you can see all the user exits can be used for shipment or transportation purpose...
Regards,
Chandra -
Creation of IBase with reference to sales order for Configurable product.
Hi Experts,
Can any one tell me How to create Ibase with reference to sales order for Configurable Products. I know we can create this using IB63, but what i need to do in this Transaction code and what settings i need to do in SPRO.
pls send ur replies to [email protected]
Thank you..Hi
You can create IBase using T-Code-IB53 and in there you can give Parent and child products.
A)Define Installed Base Category and Installation Rules-CRM
B)Define Object Families
C)Define default settings for equipment replication
D)Define Serial Number Profiles-ECC
E)Txn BF31-ECC
F)Set up attributes for individual objects
G)Set up set types
H)Set up category
I)Set up views
J)Allow reference product for IO
I hope it helps
If you require further help let me know.
Cheers
Raj -
User-Exit for Checking Customer and Sale order type in Sales Order Creation
Hi Experts,
While creating the Sales Order once i enter sold-to-party and enter line item, i have to check the customer against the sales order type.
Please suggest me if any user-exit or enhancement or BADI available for it.
Thanks & Regards,
-VMHi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
mark if helpful
Regs,
Tushar Mundlik -
User Exit for ko01 ( Creation of Internal Order )
Hi,
My requirement is to validate the Business Area & Profit Center based on the Responsible Cost Center entered. EVEN if the Business Area & Profit Center are valid entries as per the data, they should be replaced by the Business Area, Profit Center with respective Responsible Cost Center entered by user. Please help me its urgent.
Regards
VikramHi
The follwoing user exits and badis available:
Enhancement/ Business Add-in Description
Enhancement
COOPA002
Customer function for master data maint. - internal orders
COOPA003
User-Defined Fields in the Order Master
COOPA004
Customer function: Print order master data
COOPA_01
Customer check modules for internal orders
Business Add-in
INTERNAL_ORDER_EXTND
Master Data Extension for Internal Order
If it is helpful rewards points.
Regards
Pratap.M
Maybe you are looking for
-
Error occurred during initialization of VM
im new to jdeveloper please anyone help me... Starting WLS with line: C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy
-
Hello, I have the cs suite, and recently downloaded the lightroom demo. I am fairly good with picking up programs but couldn't locate where or how i can select individual elements to lighten/darken? If i wanted to make a an object lighter, should i b
-
see my code now: +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ import java.io.*; import javax.servlet.*; import javax.servlet.http.*; public class Switch extends HttpServlet{ public void service(HttpServletReques
-
I know this is probably something stupid, but it is driving me crazy and I can't seem to find how to fix it. Every now and then, people email me and the body of their messages appear in mathematical fractions! I had the same epoblem with other applic
-
LR + Snow Leopard don't export to CS4
Operative System: Apple OSX Snow Leopard When I work with Lightroom (64 bit feature enable) I can't export to Photoshop CS4 the photos processed with the adjustment brush and masks: CS4 starts but nothing happens. If I close Lightroom, I select the 3