User Exit for CN41N report

Hi Experts,
I have a requirement to display CN41N report data by WBS Profit center and WBS Project type as 2 Separate columns. These 2 fields are captured for each WBS and different for each WBS level.
Could you suggest the user exit to be used for CN41N report to add below fields
1. WBS Profit center
2. WBS Poject type
Thanks in advance for all the help.
Regards
Ashish

Hi Ashish,
Hope you are doing good. Its been a long time.
I guess you wont find the fields Profit Center and Project type in the Change layout option. As an alternative you can make use of the Dynamic selection option as stated in one of the posts above.
Attaching some pics for reference,
You will find the Project Type option under " Master Data WBS Element"
Hope it helps.
Best Regards,
Gokul

Similar Messages

User exit for expenses report in travel management

Hi All...
What is the user exit for expenses report in travel management with T Code PR04
itz urgent
with regards,
LN

Here are user exits for tcode PR04:
Exit Name           Description
FITR0001            User exit: Delete/Reorganize trip statistics
FITR0002            User exit: Create/Change trip statistics
FITR0003            User exit: Save trip (PR01, PR04, PR05)
FITR0005            User Exit: Save Trip (PR01, PR04, PR05)
RPRCST01         Customer Exit for Travel Expenses

How to create user Exits for selecting ranges of the month

Hi Bw Experts,
Right now i need to create a user exits for my report which is coming from Infocube which has 12 months and 12 qtys. But if my client want to see the content of the report for e.g 1 to 3 months in selection screen means then we need to create a variable and user exit to accomplish this problem or is there any solution by which we can solve the problem. Try to suggest me and steps to achieve.
Thanks in advance,

Hi,
Thanks for your input. But the questions is 12 amounts and 12 qtys not 12 months sorry for the typoerror. We are not carrying month field. But the User want to see the for e.g 1 to 3 months data means then how it is possible to accomplish this issue. Try to suggest me.
Thanks in advance
Message was edited by:
mano_biw durai

User exits for Tcode FCH5

May any one of you plz suggest me any userexits for tcode fch5.
i want to restrict the field of account id for validation.
how can i do this.
waiting for your reply.

Hi Pawan,
U can use this program to find user exit for Tcode FCH5
Find User exit for Tcode
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Rgds,
Prakash

User Exit for Compounded Key

I have written a FM that was included in a user exit. The purpose of my user exit is to restrict certain Accounts that my Query uses. The problem that I run into is that the Account is a numerical value which is NOT a key. For example, I could have one account that exists in two different reporting divisions such as Africa and Asia and might not want to restrict Africa. If I don't take into consideration the divison, then I will be eliminating required Accounts. I thought about creating a seperate user exit for the reporting division but then I might run into the problem of eliminating certain Accounts that are associated with that division. I'm thinking that If I create another user exit for the division, then I will somehow have to link the two(not sure how this would work). Secondly, the divison and account is a compounded key in my InfoCube. There is not InfoObject that holds the compounded key so I can not create a variable of this type.
I'm not sure what would be the best way to solve this problem so any input you can give is greatly appreciated.
Thanks,
Nyrvole

Hi Reddy,
This user exit can creating & activating in project by using CMOD Transaction code.
AFAR0002 is Enhanc for external determination of depreciation.
Thank you
Anil

User exits for report painter

Hi experts,
How can i find user exits for report painters?
Is it possible to search them for specific an library? I am searchinf them for enchancing PEP elements rreport painters.
Thank you for your time,
Artur.

No Reply, so I close.

User-exit for report RPCAIDP0 (tcode: PC00_M19_CAID)

Dear Gurus,
Does anyone know user-exits for report RPCAIDP0 (tcode: PC00_M19_CAID) ?
Thank you in advance,
PSC

Depends on what you want to do Priscilla, i have quite an experience with RPCAIDP0 report and it's not the easiest report to change the standard without copying to an customer report. Also, in the previous year, SAP changed the logic of the report quite a bit in order to have the same logic as in RPCIIDP0, so they created a class (CL_HR_PT_EMPLOYEE_TAX_DATA) in which they encapsulated all the data retrieval regarding payroll results, so it's not that dificult to enhance the class itself but it's a bit dificult to get the logic right away. I have done this for several clients, so if you can be more specific maybe i can help you.
Best regards.

Urgent: USER exit for W2 Box 13 of Tax reporter 4.7

Hi,
I am working on tax reporter version 4.7 and while printing the W2 forms saw that the Box 13 (selection of Statutory employee or Retirment plan or third party sick pay ) is not ticked. I worked in one of the clients on ECC 6.0 last year whom had a custom user exit for this same box 13 of W2 which used to get ticked on W2 form depending on the logic in that user exit.
I suggested to this present client that an user exit needs to be written, they asked me to write functional specs for the user exit, can someone help me in writing the functional specs for this W2 form Box 13 selection of Tax reporter on 4.7. what do I need to specify and how do i need to write the functional specs reflecting the logic of this Box 13 of W2 form in tax reporter. Please help me guys, its very urgent.
I apprecite your answers.
Thank you so much
Tony

Hi Oscar Romero,
Sorry its an typo error. second range should be 001.2006 to 007.2006.
1. I want to know how to create Multiple Interval(Range) value variable? - I have used selection option and created variable. Is it correct?
2. Pls find my coding.
when 'ZFISCYAC'.
IF I_STEP = 2.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZFYPEROP'. ---> Value entered is 001.2005 - 012.2006
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
L_S_RANGE-LOW4(3) = LOC_VAR_RANGE-LOW4(3).
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZSCENAR'. -
> Value entered 20060804, 20060705.
*concatenate LOC_VAR_RANGE-LOW(4) '0' LOC_VAR_RANGE-LOW+4(2)
*into L_S_RANGE-high.
L_S_RANGE-high = LOC_VAR_RANGE-LOW(4).
L_S_RANGE-high+4(1) = '0'.
L_S_RANGE-high5(2) = LOC_VAR_RANGE-LOW4(2).
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDLOOP.
ENDIF.
Final range should be for 20060804, "ZFISCAY" should be from 001.2005 to 008.2006
For 20060705 range should be 001.2005 to 007.2006.
*Coding for Filling variable "Fiscal year/Period Plan Multiple values
when 'ZFISCYPL'.
IF I_STEP = 2.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZSCENAR'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4).
L_S_RANGE-LOW+4(2) = '00'.
L_S_RANGE-LOW6(1) = LOC_VAR_RANGE-LOW4(2) + 01.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZFYPEROP'.
L_S_RANGE-HIGH = LOC_VAR_RANGE-high(4).
L_S_RANGE-HIGH4(3) = LOC_VAR_RANGE-high4(3).
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDLOOP.
ENDIF.
With same variable values entered as above plan value for variable "ZFISCPL" should be of range 009.2006 to 012.2006 for 20060804
Range should be 008.2006 to 012.2006 for 20060705.
Hope this is clear.
Pls answer very urgent.
Thanks.
Bhuvana.

User Exit for For Variable G_Set_Formula_Exit on Report Writer

Hi SAP Experts,
I want to create user exit for formula variable for Cost Center Group with alphanumeric type ( like 1KOSET- but 1KOSET is a set variable). I will use it as one of my row formula in report writer.
There is one alphanumeric user exit example, which is Controlling Area (#S010) in GS13. SAP message said that I can create other alphanumeric user exit by using user exit G_Set_Formula_Exit.
Can someone advice on how to implement this user exit?
Your advice on this issue is highly appreciated.
Thanks,
CW

Hello Ce Wie,
Were you able to implement G_SET_FORMULA_EXIT? I am also very interested on this issue.
Thanks!
Josep

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

To find the User Exits for a particular Transaction.

hi,
    I want to find the number of User Exits for a The Transaction MM01 or MM02,
    I serched in the forums but could not find satisfactory ans,
    I tried with:
             T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
    But its not helping me,
    Please help me.
Thanks and Regards
Suraj S Nair.

hi ,
if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
Finding the user-exits of a SAP transaction code
* Finding the user-exits of a SAP transaction code
* Enter the transaction code in which you are looking for the user-exit
* and it will list you the list of user-exits in the transaction code.
* Also a drill down is possible which will help you to branch to SMOD.
* Written by : SAP Basis, ABAP Programming and Other IMG Stuff
*              http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
Regards,
Prabhudas

What are the different methods to find the user-exit for any requirement?

Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju Maddi

The following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

User exit for string input in a query

Hi All,
I am writing a query where the user would enter a string for materials, depending on which all those materials which match that pattern should be displayed in the result set of the query.
This report is to display the stock value of all such materials.
I want to write a user exit for the same but have no knowledge of how to do it.
Pl help me with the code and some documents on writing a user exit.
Thanks,
Sharmishtha

You have to write Customer Exit for it.
Take help of this how to guide:
https://websmp103.sap-ag.de/~sapdownload/011000358700002762582003E/HowToDeriveVariableValue.pdf
Basically nur exit code you have to make use of CP (compare pattern) in opt paramter of code:
http://help.sap.com/saphelp_nw04s/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm

Badi or user exit for changing currency INR to EUR

hi friends,
in po header there is one tab called status.
in this tab there is one field called delivery payment
which has curr INR but i want to change that INR CuRR
to EUR.Can any one tell me how do this is there any badi or user exit
for this req.
thanks.

Hi Sonu,
Use the following program to find out the appropriate user exist for ur transaction:
REPORT ZGURU_USER_EXIT_FIND .
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Then u can use the function CONVERT_TO_LOCAL_CURRENCY to change the amount from INR to EUR.
Regards,
Himanshu

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

User Exit for CN41N report

Similar Messages

Maybe you are looking for