User Exit for CORR
Dear All,
I need a list of user exits for corr.
Regards,
Sohail
Moderator message: please (re)search yourself instead of asking others.
locked by: Thomas Zloch on Sep 4, 2010 9:49 PM
Dear All,
I need a list of user exits for corr.
Regards,
Sohail
Moderator message: please (re)search yourself instead of asking others.
locked by: Thomas Zloch on Sep 4, 2010 9:49 PM
Similar Messages
-
User-exit for MIGO, need change GKONT for CO
Good evening,
Dear friends, sorry for my english.
I have made user-exit for MIGO in GGB1 and put on it in SPRO.
I have HKONT=V3100* and corresponding HKONT=1551*( OBYC, group WRX).
Then i run MIGO and make Purchase Order.
In my user exit, if HKONT of first position eq V3100, i must change corresponding HKONT from 1551 to V1551*.
When i make Order, i am run view documents: FI and other HKONTs changed successfully! ( first possition has V3100, second - V1551).
User-exit must work only with sy-tcode = MIGO or MIRO.
But CO documens NOT changed: HKONT(type of cost) eq V3100, but corr GKONT = 1551*...
I also try to use OPEN FI, but have the same picture... (in CO docs V3100* and 1551, but all another docs and FI too - V3100 and V1551*).
I see, that GKONT has only COEP. And this table a cannot see in user-exit.
I think, that FI doc must do CO doc,
but why in
View documents->RW-infodocs->documents CO = it is not change?
Please, answer me? if you can. regards.Please, view Print-Screen of my problem:
<a href="http://rodendron.blogspot.com/2007/07/user-exit-for-migo.html">http://rodendron.blogspot.com/2007/07/user-exit-for-migo.html</a>
Anybody can help? -
GL Account User Exit for all FI transactions
Hi Experts,
We have to create a Ztable and it stores GL bank account principal amount.
Ex: 130121 (SCB Bank) - Rs.10,00,000.00
In SAP , for the same GL account closing balances will available in FS10N of each month.
Ex: 130121 (SCB Bank) for Sep'09 - Rs.8,50,000.00
Now, the requirement is..
I want to put an User Exit for this Bank GL Account . It has to perform a check operation whenever this GL accounts comes for posting on any FI transactions, and
it'll check each time to the GL account principal balances(from Ztable) with the posting amounts and give a popup message regarding about the bank limits exceeded, remainaing amounts and then only they can able to post the transactions.
Ex: If they are posting in F-02 (general ledger posting) the amount showing in GL account which go for my user exit calculations everytime and the same will be for all other FI GL transactions.
Hope u understood else pls let me know by your replies.
Pls advise.
thanks & regards
sankar.Hi..
In the tcode where u want to put the user exit, In the menu select System--> Status and double click on the program.
Then click on search and give the search term as "call-customer function".. and see if there are any available user exits..
Select one, and double click on the 3 number..if '003' ,double click on it,it will take u to the Fm..where u will find an include starting with Z.
Here u can write the code u want.
Regards,
Vishwa. -
User Exit For Transaction F150 (Dunning)
Hi All,
Can any one help me in finding a User Exit for Transaction <b>F150</b> (Dunning).Hello,
Try this one
F150D001
Bye
gabriel -
Hi,
I am Mohan. I faced on Problem with the User Exit. I write the user exit for the ME21n for PO Creation. While Creation of the PO the Purchase Requition is mandatory. it is working for the ME21n. But PO creation is another two ways is there. Those are ME22N (Purchase order---> Create) and ME23N
(Purchase order---> Create) for this case also my condition applicable but it is not working for this case. How to write the Code for this. by using Sy-ucomm also. but it is not working.
Please help me.
Regards,
MohanFollowing the user exit's related to ME22N transaction.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
Regards. -
Hi Experts,
My req, is I have to check billing date with order date/ delivery date while creating the invoice in VF01.
For that I have done codig in user exit RV60AFZZ, so it gives error ,but the billing date field get disable.
& this invoice no. alsp get created.
So can anybody plz tell me in which user exit i have to put my code ???
I have tried with RV60AFZC.But it is not working.
My code is
FORM userexit_pricing_prepare_tkomp.
* TKOMP-zzfield = xxxx-zzfield2.
* structure for vbak
TYPES:BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln,
audat TYPE vbak-audat,
END OF ty_vbak.
*likp structure
TYPES:BEGIN OF ty_likp,
vbeln TYPE likp-vbeln,
lfdat TYPE likp-lfdat,
END OF ty_likp.
*vbrp structure
TYPES:BEGIN OF ty_vbrp,
vgbel TYPE vbrp-vgbel,
vgpos TYPE vbrp-vgpos,
aubel TYPE vbrp-aubel,
aupos TYPE vbrp-aupos,
END OF ty_vbrp.
DATA:it_vbak TYPE STANDARD TABLE OF ty_vbak,
it_likp TYPE STANDARD TABLE OF ty_likp,
it_vbrp TYPE STANDARD TABLE OF ty_vbrp.
DATA:wa_vbak TYPE ty_vbak,
wa_likp TYPE ty_likp,
wa_vbrp TYPE ty_vbrp.
***** take reference document no & delivery no. *****
LOOP AT xvbrp.
wa_vbrp-vgbel = xvbrp-vgbel.
wa_vbrp-vgpos = xvbrp-vgpos.
wa_vbrp-aubel = xvbrp-aubel.
wa_vbrp-aupos = xvbrp-aupos.
APPEND wa_vbrp TO it_vbrp.
ENDLOOP.
IF it_vbrp IS NOT INITIAL.
SELECT vbeln audat FROM vbak
INTO TABLE it_vbak
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-aubel.
SELECT vbeln lfdat from likp
INTO TABLE it_likp
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel.
ENDIF.
**** check for invoice date with order date *****
LOOP AT it_vbak INTO wa_vbak.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_vbak-audat.
MESSAGE 'Invoice Date is less than Order Date' TYPE 'E'.
ENDIF.
ENDLOOP.
**** check for invoice date with delievery date *****
LOOP AT it_likp INTO wa_likp.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_likp-lfdat.
MESSAGE 'Invoice Date is less than Delivery Date' TYPE 'E'.
ENDIF.
ENDLOOP.
ENDFORM. "USEREXIT_PRICING_PREPARE_TKOMP
Thanks & Regards,
Anagha DeshmukhHello,
These are the user exits for the tcode.
J_3RSINV Export sales
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
Keep the break point and try in the debugging in each and every exit and see which user exit is triggred. -
HOW TO CREATE A USER-EXIT FOR MB31 GOODS RECEIPT
Hy,
<b>HOW TO CREATE A USER-EXIT FOR MB31</b>
TO COMPARE ORDER QTY CONFIRMED AND GOODS RECEIPT QTY
( IF GR QTY GREATER THAN CONFIRMED QTY ERROR MESSAGE SHOULD COME AND NOT ALLOW TRANSCATION TO PROCEED).
POINTS CONFIRMED.
REGARDS,
KARTIKEY.Hi Rawat,
You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert -
How to find the exact user exit for our requirement?
Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
<b>How to find the exact user-exit for your requirement.</b>
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
<b>The procedure to find the package name.</b>
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
<b>Checking if the user-exit is getting triggered or not.</b>
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad -
How to find the appropriate user exit for invoic02 idoc in idoc_output_invo
Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM -
REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1
Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
LOOP i_t_data INTO my_struct
my_struct-KOSTL "Here you'll must have your Cost Center
...etc...etc...etc
ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon -
User exit for data source 0HR_LSO_1
Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
LOOP i_t_data INTO my_struct
my_struct-KOSTL "Here you'll must have your Cost Center
...etc...etc...etc
ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon -
How to find out user exit for LI20
any one please tell me how can find user-exit for LI20
Regards,
VenkatWell if you want to search user exits associated with the t-code LI20...
then go to se93, enter the t-code LI20->click on display-> go the program-> go to find next in the top menu (under Edit) and write "user_exit" and select "In the main program" and and click on continue... in case if there is any user exit; it will show you.
Regards,
Raman -
How to find the user-exit for transaction fpp2
Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar. -
How to find the user exit for order cancellation
I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
I have got a Zreport where this order should not come as open order item.
Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
Regards.hi
pls tell me t.code so that i will send all user exits related to that particular t.codes
Thanks & Regards
phaneendra -
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.
Maybe you are looking for
-
Hi Guys, <br><br> First off, my apologies if this thread is in the wrong forum; it seemed to be the most relevant one to my question. <br><br> Background<br> I have written an ABAP program to gather some statistics and input them into a table, this a
-
Hello, im having an error when ever i try to do an gpupdate /force" through cmd Error: C:\Users\administrator>gpupdate /force Updating Policy... User policy could not be updated successfully. The following errors were encount ered: The processing of
-
Flexconnect AP with auto anchor at head office
hi All, I have a head quarters with two WLC5508 anchored to another 5508 on the DMZ. Now we want to roll out wireless guest to the branches with local switching of guest wireless traffic. The guest ssid used at head quarters is anchored to the gues
-
Security Audit Log Not Displaying
Hi, I have activated the following profile parameters in my instance profile: rsau/enable = 1 rsau/max_diskspace/per_day = 0 rsau/selection_slots = 2 rsau/local/file = G:\usr\sap\D0\D00\log\++++++++.AUD rsau/max_diskspace/per_file = 0 rsau/max_disksp
-
my iphone 4s wont turn back on after the battery died, have tried all the steps, still not working. contacted my network provider they said to send it in but before that turn off find my iphone. I am unable to do so as ive forgotten my apple id and p