User Exit for credit management at confirmed quantity in sales order

Dear All ,
kinldy tell how to define a user exit and where i can write for credit check to be done to the confirmed quantity in the sales order .
Also pls tell me that how to define the user exit and attach to customer reserve field in the customising for automatic credit control .
regards
Baranidharan Ramar

Hi
The following is the information from the sap documentation...you can also refer from IMG - SD - System modification - userexit - userexit for credit check
Credit Check
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Thanks,
Ravi

Similar Messages

User exit for Credit Management check on SD document

Is it possible to enhance and put in some custom logic during CREDIT check on SD documents?
Can some one tell me which User exit can I used?

Hi,
Yes, I think you can do. Here is what SAP help says....
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Hope this helps
Thanks
Mukund S

User Exit for Partner Determination in VA01, VA02 transaction ( Sales order

Dear All,
I have an issue in which i need to determine partner for every change in ship to party both at header and item level during sales order creation or change.
Can you please suggest an appropriate user exit for the same.
I have tried
EXIT_SAPLV09A_003
EXIT_SAPLV09A_004
but they get triggered only when we enter into VA01 transaction and not when the ship to party is manually changed.
If possible i want to avoid MV45 exits as there are chances of regression due to too many different functionalities already present in my system.
In worst case scenario please specify the place wherein i need to code in MV45 exits and what are the fields i need to change.
Most probably i filtered out on "USEREXIT_MOVE_FIELD_TO_VBAP" but i am not 100 percent sure on this, please suggest.
Thanks in advance
Ronak

Hi,
please use User exit function: EXIT_SAPMV45A_003
Put your coding in include: ZXVVAU05 (create it by double clicking, if not already created) and activate.
Regards,
Sanjay Gogikar

User Exit for correct ship-to Party while Creating Sales Order

Dear Friends,
Pls let me know which User Exit should I use to validate the Ship-to Party on the basis of Sold-to Party, while creating a sales order.
In other words we wish to make sure that the user gives the correct Ship-to party corresponding to the Sold-to party, while creating a sales order.
Regards,
Alok.

Dear Naveen,
Thanks for replying.
I do agree with you that SAP may validate the Ship-to Party in accordance with the Sold-to Party. But still the user may change that Ship-to Party value and save the Sales Order with a wrong Ship-to Party.
Here, my user wants a check/validation that no one should be able to save the sales order with wrong Ship-to Party other than the ones defined in Customer Master.
Hope you got the issue now.
Regards and thanks once again,
Alok.

User Exit for calculation of inclusive tax scenario in Sales ordercreation

Hi All,
What is the User Exit for calculation of inclusive tax scenario in Sales order creation for pricing procedure.
Regards,
Tulasi

Hi Tulasi
Please check this thread , if your problem is solved with the help of this thread then there is no need to go with the user exit.Just go with the changes in the condition types.
Tax inclusive in base price
Regards
Srinath

Please give me User Exit for Credit Release -Urgent-

Please send the User Exit for Credit release

Mr.Goutam
My request is that dont continue your questions in one thread.
Two options are available for you to post in this forum
a) First list out what are all your requirements and ask this forum in which specific area you have doubts. If all your questions are answered, award points who have given the solution for you.
b) Post question one by one and wherever your questions are answered, close the thread and reward points to the members.
If you take this thread, Initially you raised a question on Credit Limit and many of us have answered your question and the thread should have been closed. But questions are continuing with same subject but with different topics which I feel is WRONG.
Hope you understand now.
Thanks
G. Lakshmipathi

User Exits for Credit Check

Hi Friends,
I got user exits for credit check but I could not understand how to implement these rather these are not found in system (CMOD & SMOD tcodes) We have ECC6.0. These are the following.
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
Any help how to implement these is appriciable.
Regards,
Rajesh Vasudeva

Hi Rajesh,
You can make use of the implicit enhancement, where in you can add code to any standard program either at the start or after the last line in a form or function module.
Refer the URL
http://help.sap.com/saphelp_nw04s/helpdata/en/8f/f2e540f8648431e10000000a1550b0/frameset.htm
for more info on Enhancement Framework.
Hope this helps you.
Reg
Praveen Alex Luke.

Delivery quantity greater than confirmed quantity in sales order

Hi experts,
Quantity in delivery order can be changed to more than the confirmed quantity in sales order when there is sufficient stock. (Setting "Check overdelivery" in 0VLP already maintained "B-Situation rejected with an error message").
Anyway in system to check only "confirmed quantity" can be delivered?.
Regards,
Liang

Thanks Ankur for your reply.
The "Overdeliv. tolerance" in customer master allow customer to deliver more than the quantity in sales order.
But my situation here is to control the deliver quantity base on confirmed quantity in sales order.
For example, i have quantity 10 for an item in sales order, and i only confirm 5 to deliver. Let's say my stock has more than 15 quantity, during DO creation, system will proposed 5 but i can manually change quantity to 10.
I would like to control only confirmed sales order can be delivered. Is this only can control using user exits?
Best Regards,
Liang

How to Restrict Confirmed Quantity in Sales Order (Based on Batch Expiry)

Dear SD Experts,
Currently our sales order confirms any amount of quantity if stock is available. And only during delivery it checks for the expiration of the batch and reduces the delivery quantity to batches available in stock within expiry.
But since we are doing a bulk creation of deliveries at the end of the day, the check for expired batches is happening too late and no visibility for the data entry operators of stock that cannot be delivered during creation of the sales orders.
So I am looking for solution to restrict the confirmed quantity in sales order to actually confirm only stock what can be delivered. i.e. based on expiry of the batch.
Thanks!

hi
in Logistic general - batch mangement - batch determination allocation and check activation - maintain allocate SD search Procedure/ activate check
check this for your sales area and sales document type and then in the search procedure maitain the strategy to check the Expiration date.
regards,
Sudhir

How to control not to confirm quantity in sales order schedule line

Hi,
We have a problem with confirmed quantity in sales order schedule line.
When I reject a position in a sales order, confirmed quantity still remains with quantity ( diferent to 0).
I need in some cases that system not to confirm quantity in schedule line at item level.
I've tried to do this with a new routine in OVB8 transaction, but it didn't work.
Could you help me? How can I avoid the system to confirm quantity in a sales order item?
Thanks in advance....

Hi Lakshmipathi,
I'm sorry. The rejection was a bad example.
I need, in some cases, that the system doesn't confirm quantity in sales orden item. We have a custom field in sales order item and we need to confirm with 0 quantity , when that field has a specific value.
Due to that field is a custom field, I need an exit, or rutine, or .. i don't know...to inform a standard field too ( delivery block, rejection...) something to get confirmed quantity to 0.
I've tried with rutine in OVB8. But It didn`t work
I've tried with delivery block, but with this all items in sales order, confirms with 0. I need at item level.
Thanks

It still shows confirmed quantity at sales order in case of no stock

Hi,
I have the availability check configuration, but my requirement for 0 confirmed quantities at sales order in case of no stock is not working. That is- It still shows confirmed quantity at sales order in case of no stock. Please suggest.
All the setting for availability check is done. I have set the accumulation as 3 in checking group. But still not working.
Thanks
Mauryan

Dear Mauryan,
ATP check will work if you have already turned on ATP check in the following 3 transactions:
OVZ2
OVZG
OVZ8
You need to turn on ATP at your checking group, requirement class, and schedule line category. If one of them is off, then ATP check will not work. See note 547512, Q1.
Claire

Confirm Quantity in Sales Order

at the time VA01 (create Sales order)
in Schedule lines tab systems shows Confirm quantity for final goods item with confirm quantity which should not be happen .
can anybody please how to customize for confirm quantity in sales order as we are working on make to order.

The confirmed quantity will be picked based on the schedule line category u have choosed. So change the schedule line category to No material planning ( CN ).
Schedule line category
A classification that distinguishes between different kinds of schedule line. The category determines how the system processes the schedule line.
Use
The schedule line category determines, for example, whether the system passes on requirements to materials requirements planning (MRP).

User exit for Credit Memo creation

I want to create an IDOC when the credit memo will be created.
What is the name of the user exit where I can write the IDOC generation code ?
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 9:47 AM

IDoc Inbound User Exits
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
- ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
- ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
- ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
- ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
- ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
- ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
- ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
- ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
- ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
- ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
- ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
- ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
- ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
- ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
- MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
- MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
- MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
- MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
- MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
- MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
- MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
- MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
- VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
- VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
- VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
- VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
- VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
- VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
- VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
- VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
- LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
- MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
- V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
- V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
- V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
- V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
- V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
- V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
- CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
- CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
- VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
- VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
- VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
- VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
- F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
- F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
- F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
- F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
- F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
- F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
- F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
- F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
- F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
- F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
- FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
- FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
- F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
- VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
- VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
- VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
- RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
- RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
- RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
- MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
- MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
- FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
- FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
- FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
- FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
- FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
- FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
- FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
- FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
- FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
- FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
- MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
- MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
- MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
- MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
- MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
- WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
- MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
- SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
- MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
- MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
- VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
- VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
- VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
- VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
- VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
- VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
- VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
- VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
- VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
- VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
- VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
- MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
- MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
- MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
- MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
- VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
- VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
- VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
- VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
- VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
- VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
- VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
- VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
- VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
- VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
- VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
- WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
- MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
- MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
- MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
- WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
- SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
- SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
- WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
- FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
- FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
- VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
- VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
- VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
- VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
- VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
- VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
- VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
- VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
- VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
- VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
- VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
- VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
- VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
- VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
- VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
- VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
- VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
- VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
- VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
- VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
- V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
- V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
- V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
- V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
- V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
- V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
- V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
- V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
- V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
- V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
- V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
- V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
- V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
- MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
- MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
- BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
- BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
- V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
- V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
- V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
- V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
- V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
- V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
- V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
- V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
- V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
- MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
- MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
- MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
- MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
- MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
- MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
- MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
- MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
- MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
- MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
- MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
- MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
- MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
- MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
- MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
- MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
- MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
- WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
- WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
- WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
- WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
- WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
- WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
- WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
- WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
- WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
- WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
- WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
- WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
- WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
- WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
- WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
- WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
- WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
- WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
- WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
- WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
- WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
- WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
- WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
- WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment

Confirmed quantity in sales order and credit check

Due to the fact that we are using automatic credit check , for the sales orders that are not blocked due to credit control the confirmed quantity is made to 0 until some person responsible unblocks the sales order.
My issue is how to prevent the confirmed quantity from becaming 0 even if credit block exists

Dear Friend
If the automatic credit management is active the confirmed quantities of sales order becomes 0 because in t code OVB8 the requirement no used will be 101 and system routine will be 1 that is system reservation
Here you need to change the 101 to something else or you have to write a new routine thro ABAPer so that even if the document goes for credit block the confirmed quantities doesnot change or become 0
I dont have the practical experience of changing this to something else and having worked on that
But you may try that
The area to explore or get your requirement is this only
Regards
Raja

Standard report show the confirmed quantity in sales order

Hello
i'd like to know t-code for report show the confirmed quantity and the remaining quantity of sales order
For example : i create sales order with quantity (1000) and the quantity of material in storage location 600 , so i want report display the confirmed quantity ( 600) and the remaining quantity (400)
Thanks

Search the forum before posting. Check in VA05
G. Lakshmipathi

User Exit for credit management at confirmed quantity in sales order

Similar Messages

Maybe you are looking for