User exit for Credit Management check on SD document

Is it possible to enhance and put in some custom logic during CREDIT check on SD documents?
Can some one tell me which User exit can I used?

Hi,
Yes, I think you can do. Here is what SAP help says....
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Hope this helps
Thanks
Mukund S

Similar Messages

  • User Exit for credit management  at confirmed quantity in sales order

    Dear All ,
    kinldy tell how to define a user exit and where i can write for credit check to be done to the confirmed quantity in the sales order .
    Also pls tell me that how to define the user exit and attach to customer reserve field in the customising for automatic credit control .
    regards
    Baranidharan Ramar

    Hi
    The following is the information from the sap documentation...you can also refer from IMG - SD - System modification - userexit - userexit for credit check
    Credit Check
    If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
    LVKMPTZZ
    LVKMPFZ1: USER_CREDIT_CHECK1
    LVKMPFZ2: USER_CREDIT_CHECK2
    LVKMPFZ3: USER_CREDIT_CHECK3
    User exit for availability check
    User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
    This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
    Thanks,
    Ravi

  • User Exits for Credit Check

    Hi Friends,
    I got user exits for credit check but I could not understand how to implement these rather these are not found in system (CMOD & SMOD tcodes) We have ECC6.0. These are the following.
    LVKMPTZZ
    LVKMPFZ1: USER_CREDIT_CHECK1
    LVKMPFZ2: USER_CREDIT_CHECK2
    LVKMPFZ3: USER_CREDIT_CHECK3
    Any help how to implement these is appriciable.
    Regards,
    Rajesh Vasudeva

    Hi Rajesh,
    You can make use of the implicit enhancement, where in you can add code to any standard program either at the start or after the last line in a form or function module.
    Refer the URL
    http://help.sap.com/saphelp_nw04s/helpdata/en/8f/f2e540f8648431e10000000a1550b0/frameset.htm
    for more info on Enhancement Framework.
    Hope this helps you.
    Reg
    Praveen Alex Luke.

  • Please give me User Exit  for Credit Release -Urgent-

    Please send the User Exit for Credit release

    Mr.Goutam
    My request is that dont continue your questions in one thread.
    Two options are available for you to post in this forum
    a)  First list out what are all your requirements and ask this forum in which specific area you have doubts.  If all your questions are answered, award points who have given the solution for you.
    b)  Post question one by one and wherever your questions are answered, close the thread and reward points to the members.
    If you take this thread, Initially you raised a question on Credit Limit and many of us have answered your question and the thread should have been closed.  But questions are continuing with same subject but with different topics which I feel is WRONG.
    Hope you understand now.
    Thanks
    G. Lakshmipathi

  • User exit for Credit Memo creation

    I want to create an IDOC when the credit memo will be created.
    What is the name of the user exit  where I can write the IDOC generation code ?
    Edited by: Alvaro Tejada Galindo on Feb 18, 2008 9:47 AM

    IDoc Inbound User Exits
    1. ACC_BILLING
    Accounting: Post invoice (OAG: LOAD RECEIVABLE)
    - ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    2. ACC_EMPLOYEE_EXP
    FI/CO: HR posting GL (AcctngEmplyeeExenses)
    - ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    3. ACC_EMPLOYEE_PAY
    FI/CO: HR posting AP (AcctngEmplyeePaybles)
    - ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    4. ACC_EMPLOYEE_REC
    FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
    - ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    5. ACC_GL_POSTING
    Accounting: General G/L account posting
    - ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    6. ACC_GOODS_MOVEMENT
    Accounting: Post goods movement (OAG: POST JOURNAL)
    - ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    7. ACC_INVOICE_RECEIPT
    Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
    - ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    8. ACLPAY Accounting: Inbound invoice
    - ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
    - ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
    - ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
    9. ACLREC
    Accounting: Billing document
    - ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
    - ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
    - ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
    10. ACPJMM
    Posting in accounting from materials management
    - ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
    11. ARTMAS
    Create and change of material master (Retail)
    - MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
    12. BLAOCH
    Purchasing contract change
    - MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
    - MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
    - MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
    13. BLAORD
    Purchasing contracts
    - MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
    - MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
    - MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
    14. BLAREL
    Release order documentation for distributed contracts
    - MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
    15. COND_A
    Conditions: master data for price determination
    - VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
    - VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
    16. CREMAS
    Distribute vendor master
    - VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
    17. DEBMAS
    Customer master
    - VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
    18. DELINS
    Delivery schedule/JIT schedule
    - VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
    - VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
    - VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
    - VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
    19. DESADV
    Delivery: Shipping notification
    - LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
    - MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
    - V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    - V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    - V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    - V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    - V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    - V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    20. DOCMAS
    Master document
    - CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
    21. DOLMAS
    Document-object links
    - CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
    22. EDLNOT
    EDL delivery notes
    - VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
    - VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
    - VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
    - VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
    23. FIDCC1
    Send entire FI documents (user exit 003/4)
    - F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    - F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
    - F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    - F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
    24. FIDCC2
    Send entire FI documents (user exit 005/6)
    - F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    - F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
    - F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    - F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
    25. FIDCMT
    Sending single items for FI-GL
    - F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    - F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    26. FINSTA
    Bank Statement
    - FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
    - FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
    27. FIROLL
    General ledger rollup for FI-GL (delta f. line items FIDCMT)
    - F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    28. GSVERF
    Cred. memo procedure
    - VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
    - VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
    - VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
    29. HRMD_A
    HR: Master data and organizational data (appl. system)
    - RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
    - RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
    - RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
    30. INFREC
    Purchasing info record
    - MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
    - MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
    31. INVOIC
    Invoice / Billing document
    - FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
    - FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
    - FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
    - FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
    - FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
    - FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
    - FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
    - FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
    - FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
    - FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
    - MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
    - MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
    - MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
    - MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
    - MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
    32. LIKOND
    Listing conditions
    - WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
    33. MATMAS
    Material Master
    - MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
    34. MRESCR
    Create reservation
    - SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
    35. ORDCHG
    Purchase order/order change
    - MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
    - MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
    - VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
    - VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
    - VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
    - VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
    - VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
    - VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
    - VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
    - VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
    - VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
    - VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
    - VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
    36. ORDERS
    Purchase order / order
    - MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
    - MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
    37. ORDERS
    Purchase order / order
    - MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
    - MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
    - VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
    - VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
    - VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
    - VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
    - VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
    - VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
    - VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
    - VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
    - VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
    - VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
    - VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
    - WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
    38. ORDRSP
    Purchase order / order confirmation
    - MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
    - MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
    - MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
    - WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
    39. PORDCR
    Create purchase order
    - SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
    40. PREQCR
    Create purchase requisition
    - SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
    41. PROACT
    Stock and sales data
    - WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
    42. REMADV
    Payment advice
    - FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
    - FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
    43. REQOTE
    Inquiry
    - VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
    - VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
    - VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
    - VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
    - VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
    - VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
    - VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
    - VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
    - VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
    - VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
    - VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
    44. SBINV
    Credit memo procedure with invoice creation
    - VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
    - VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
    - VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
    - VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
    - VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
    45. SDPACK
    Packing confirmation
    - VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
    - VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
    46. SDPICK
    Picking confirmation
    - VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
    - VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
    47. SHP_IBDLV_CONFIRM_DECENTRAL
    Confirmation (Inbound Delivery)
    - V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
    48. SHP_IBDLV_SAVE_REPLICA
    BAPI Function Module for Duplication of Outbound Deliveries
    - V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
    49. SHP_OBDLV_CONFIRM_DECENTRAL
    Confirmation (Customer Delivery)
    - V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
    50. SHP_OBDLV_SAVE_REPLICA
    BAPI Function Module for Duplication of Outbound Deliveries
    - V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
    51. SHPCON
    Delivery: Shipping confirmation
    - V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    - V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    - V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    - V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    - V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    - V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    52. SHPMNT
    Shipping outbound
    - V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
    - V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
    - V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
    53. SRCLST
    Source List
    - MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
    - MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
    54. SRVMAS
    Master data service master
    - BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
    - BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
    55. TPSSHT
    Shipping planning system: Transfer planned shipments
    - V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
    - V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
    - V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
    56. WHSCON
    Delivery: Stock confirmation
    - V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    - V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    - V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    - V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    - V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    - V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    57. WMBBIN
    Block Storage Bins
    - MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    - MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
    58. WMCATO
    Reversal/Reversal request for transfer order
    - MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    - MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
    59. WMINVE
    Inventory count input
    - MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    - MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
    - MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    60. WMMBXY
    IDoc Report goods movements in IM
    - MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
    61. WMSUMO
    Move storage unit
    - MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    - MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
    62. WMTOCO
    Transfer order
    - MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    - MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
    63. WMTORD
    Transfer order
    - MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    - MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
    - MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
    64. WMTREQ
    Create/Cancel transfer order
    - MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    - MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
    65. WPUBON
    POS interface: Upload sales documents (compressed)
    - WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
    - WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
    - WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
    - WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
    66. WPUFIB
    POS interface: Upload Fin.Acc. interface SRS/POS
    - WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
    - WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
    67. WPUFIB
    POS interface: Upload Fin.Acc. interface SRS/POS
    - WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
    - WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
    68. WPUKSR
    POS upload cashier data
    - WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
    - WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
    - WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
    - WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
    - WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
    - WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
    69. WPUUMS
    POS interface: Upload sales data (compressed)
    - WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
    - WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
    - WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
    - WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
    70. WPUWBW
    POS interface: Upload goods movements
    - WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
    - WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
    - WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
    - WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
    71. WVINVE
    Store physical inventory / sales price revaluation
    - WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
    - WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment

  • Need a user exit for Export Control check in Sales Order fro VA01/VA02

    Hi ,
         I need a user exit for Export Legal Control process in Sales Order.since Ship-to country in the Sales Order is not always the ‘ultimate destination country’ User Exit needs to be built in with following logic
    1.     Check to see if ‘ultimate destination country’ field is maintained in Sales Order
    2.     If a value is maintained then for the Export control checks use ‘ultimate destination country’ instead of the Ship-To country (step 1)
    3.     If no value is maintained then use Ship-To country as default
    The user exit is called when the user creates or changes a Sales Order.
    Can anybody help ?
    Thanks

    Hi,
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001 Activating Sourcing Subitem Quantity Propagation
    <b>Reward points</b>
    Regarsd

  • BADI or USER Exit for BP Adress check

    Hi All ,
                what is the badi or user exit for giving a additional check on Postal Codes when creating a BP ?
    I have checked BUPA_ADDR_CHECK
    BUPA_ADDR_EXPORT
    BUPA_ADDR_IMPORT
    BUPA_ADDR_UPDATE
    BUPA_ADRREL_EXPORT
    and the user exit ZXSZARU01
    but when i am entering the postal code and pressing Enter , i am not able to catch the User/EXIt or badi .
    Thanks for help.

    Hi
      Use the BAdi : ADDRESS_CHECK
      Implement the method: ADDRESS_POSTAL_CHECK
    Once you enter the Post Code and Country on BP Txn, Pressing Enter will trigger this Badi for  address check !
    Good Luck !
    Thanks
    <b>Allot points if this helps !</b>

  • User exit for CJ20n (to check budget when create Reservation) for project

    Dear All,
    Plz advice, is there any user exit for CJ20n(project builder) in order to check available budget when we create reservation under a network/activity for a project?
    Many thanks in advance.

    Hi,
    Budget functionality is available against actual / commitment items, but n't against reservation of materials as there cane be reservation at projects or plant level. Morever there is no such user exit in CJ20N.
    If you can make developments of reservation agsinst network as committments items then budget functionality may work in that case.
    Hope this will help you.
    Regards,
    Rakesh Pradhan

  • User Exit for Changing ATP Checking group

    Hi All
    I am new to this area. I have a requirement to change the ATP Checking Group  and ATP: Product availability check to new value.I was looking out if theres any specific user exit for this .Any pointers would be highly appreciated.
    Thanks
    Amruta

    Hello, still I do not have clearcut idea of business process for changing ATP group?
    However i have understood that u want to influence selection of ATP group in the process.
    In case u want to retain it for longer period, then u may use EXIt in cif which is called during transfer of Product master. With this u can have predefined value of ATP group as per your requirement.
    Else you may change the ATP group  in R/3 prior to ATP calls to APO.  U may use exit "EXIT_SAPLATPC_001" in program  " AVAILABILITY_CHECK_CONTROLLER". I am not sure which all prameters u can change in this exit
    Please test in detial before finalizing the design
    Regards
    Mangesh A. Kulkarni

  • User exit for credit check

    Hi all,
    Can anyone give the user exit name for credit check.

    Hello,
    Following exits are available:
    LVKMPFZ1  
    LVKMPFZ2  
    LVKMPFZ3  
    Regards,
    John.

  • User Exit in Credit Managment - Urgent

    Dear All,
    One of our customers want to use option of Oldest of open Items overdue in the Automatic credit check.
    WIth the only difference that he does not want the field  " Days oldestItem ( Table Name V_T691F / Field Name OITOL)" within IMG. He wants that field to be available in the customer master.
    In order to achieve this we have thought of following solution --
    1. Add new field in the customer master using screen exit in " General Data / Company Code" Tab for capturing  " Days oldestItem ( Table Name V_T691F / Field Name OITOL)"
    2. Use user exit LVKMPFZ1. Build following logic into the same.
    Refer table for Open Line Item (Table BSID)
    Due date = Document Date (Field BLDAT) + Days 1 (Field ZBD1T)
    If, Due date + Field in Customer Master added through screen exit (in no. of days) < Today, Credit Check will be active & depending on the setting in Automatic Credit Check, we can get either warning message or error
    Please check if above logic is OK. If you wish to suggest any changes, you are most welcome to do so. Points will be rewarded for any valuable suggestion. But please hurry up. Unfortunately we do not have much time.
    Regards
    Nikhil

    Hi,
    TRY THIS PROGRAM MAY BE HELP U,
    REPORT z_find_userexit NO STANDARD PAGE HEADING.
    *&  Enter the transaction code that you want to search through in order
    *&  to find which Standard SAP User Exits exists.
    *& Tables
    TABLES : tstc,     "SAP Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
    Find SAP Modifactions
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    Thanksmate,
    Reward if helpful,
    Phani

  • User Exit for warehouse management - transfer order sorting

    Hi,
    I want to sort transfer order of warehouse management by user exit, which user exit I can use?
    Kindly please advise.
    Regards

    Hi,
    I worked on the same object.
    For sorting you have to place a button in the standard transaction,
    I found some screen exits but they are not working.
    Finally I developed the total customized transaction for that standard LM45.
    If you have any doubts let me know.

  • User Exit for assignment number check

    Hi SAP GURUS,
    I want to have a cheque in system for not to enter a cheque number twice in assignement field. Which user exit i can use for the cheque payment made thru F-53 OR F-58 OR F110.
    Thanks
    CHEERS
    Edited by: NITIN on Apr 26, 2010 7:50 AM
    Edited by: NITIN on Apr 26, 2010 11:18 AM

    Identification of user EXIT
    1.     Enter T.code for which you want to maintain User exit. For ex : ME51 (Purchase requisition)
    Path:  Status Status Double Clicks on the program NameGo toAttributesNote down development class.
    For Ex : ME51u2014development class/package name is  ME
    2.     Enter T.code : SMODutilities FindEnter Development class/package name Execute
    3.     It shows all the Exit names. Click on Exit Name and click on Functional module name.
    for ex: f-53 having following exits.
    F050S001  FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002  FIDCC1: Change IDoc/do not send
    F050S003  FIDCC2: Change IDoc/do not send
    F050S004  FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005  FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006  FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007  FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001  Balance Sheet Adjustment
    FARC0002  Additional Checks for Archiving MM Vendor Master Data
    FEDI0001  Function Exits for EDI in FI
    RFAVIS01  Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00  Line item display: Checking of selection conditions
    RFKORIEX  Automatic correspondence
    SAPLF051  Workflow for FI (pre-capture, release for payment)
    Thanks
    ANJI

  • User Exit for IW32 accessrights check on fields

    Hello,
    i need to implement a check that enables me to block the access on a column within the table (transaction IW32) at the objects-tab for users of a specific role.
    That check could be done by showing an error message once the user presses SAVE or by blocking the input in that table. I checked the Userexit EXIT_SAPLCOIH_009  but that one only allows a check on the header data not on the data of the objects-tab.
    I hadnt found any other user exit that could do the trick. Is that only possible by SAP-code manipulation ?
    Could somebody help me out here ?
    Thanks and best regards,
    oliver

    Hello and thank you very much for the answers.
    Pete, i checked the BADI IWO1_SCREEN_MODIFY but im unsure if that would work because it only hides fields and doesnt allow to disable input. Another problem is that the screen-loop only runs over the input-fields above the tab and the table. (like Order, Sys. Status etc)
    But i need to modify the table itself. Any idea how i can access the table on the tab here ? I normally use ALVs so the question is too if the screen-loop even run over such old-styled-tables usually. Cant say that 100% but i thought it would. For me it looks it doesnt actually :/
    The loop-screen runs only over the elements of dynpro 1108 and not 0300 which contains the table.
    Any idea ?
    thanks again, your help is highly appreciated.
    oliver
    Edited by: Oliver Neumann on Jan 29, 2009 10:25 AM

  • User exit for FF68 edit check list

    Hi to all
    My requirement is to impose a check in FF68 - edit check list to allow change/enter check details only for certain customer.
    Now please tell me how it is possible and which user exit will be used.
    I want to use the authorization object if possible.
    Thanks in advance.
    Regards
    anubhav

    closed.

Maybe you are looking for