User-exit for default values in service order

Hi,
i use EXIT QQMA0025 (EXIT_SAPLIQS0_017) to set some default values by creating
a service notification.
Is there some exit or badi to do the same for service orders. I don't want to use TPMUS.
Regards, Dieter

I create this thread in SD, because
i don't get any answers.
Regards, Dieter

Similar Messages

  • User Exit for default values in IW51

    Hi All,
    Can any suggest User Exit or BADI for default values like Cause code in IW51 Tcode.
    Regards,
    Samatha.

    Hi,
    Please check these
    Exits
    IWO10026                                User check on setting status 'Do not perform'
    IWO10027                                User exit: Generate user-defined settlement rule
    IWOC0001                                Create PM/SM notification: Determine reference object
    IWOC0002                                PM/SM notification: Check whether status change is allowed
    IWOC0003                                PM/SM authorization check of ref. object and planner group
    IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
    Business Add-in
    IQS_MASS_CHANGE                         BadI for Mass Changes to Notifications
    IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
    NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
    WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
    IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
    IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
    IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample

  • User exit for profitability segment in service order settlement rule

    Does anybody know if exit EXIT_SAPLKEAK_001 works for the profitability segment creation during the creation of a settlement rule of a service order?
    The context is the following: the company uses service orders which are settled periodically (it receives revenue from sales order which is posted to the service orders at time of billing, and also costs at time of goods issue). The profitability segment in the settlement rule of the service order needs to be the same as the one from the billing document that posted to the order.
    Can I use EXIT_SAPLKEAK_001 to find the characteristics from the billing document and populate it in the PSG of the settlement rule? If yes, could this be applied to only one specific service order type?
    Thank you.

    Hi
    If your settlement is triggered by a batch or is triggered by a workflow exit EXIT_SAPLKEAK_001 is not run. From release 5.00 on characteristic groups are indeed not considered any more during batch input processes because there were problems before with initial chars of a CO-PA line item resulting from a batch input process that actually shouldn't be initial.
    Refer SAP Note 581739, which put an end to usage of char groups during batch input processes. Also refer SAP Note 142628.
    Regards
    Sanil Bhandari
    Edited by: Sanil K Bhandari on Jun 23, 2011 10:12 AM

  • BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

    Hi,
    I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
    Please could anyone help me with this .
    Regards,
    Sushanth H.S.

    Hi!
    User Exits in Transportation
    In Transportation, there are enhancements that you can use with transaction CMOD.
    For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
    You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
    Business Add-Ins in the transports
    Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
    Customer-specific functions can be executed before the save time and after the database update.
    The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
    AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
    BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
    IN_UPDATE: BADI is called up after the database update.
    Standard Settings
    Creating a BADI method:
    Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
    On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
    Afterwards, go to the heading and activate the interface.
    Regards
    Tamá

  • Screen /user exit for additional screen on sales order header

    Hello sir's,
    can anybody help me for this query---
    Screen /user exit for additional screen on sales order header.
    exit name.
    Thanks in advance,
    Vikram

    Hi,
    SAP has provided screen modification. This you can do on "Additional data B" screen at both <b>header</b> and line iteam level.
    Additional <b>header data is on screen SAPMV45A 0309</b>, additional item data on screen SAPMV45A 0459. These screens contain the <b>Include screens SAPMV45A 8309 ( this is the screen exit at header  )</b> or SAPMV45A 8459 ( this is the screen exit at item ) as user exits. There few more exits you will have to code to get this screen works. The are,
    MV45AOZZ - PBO module of screen
    MV45AIZZ - PAI module of screen
    MV45ATZZ - Global data definition for user-exit.
    Check this link for more info regarding user-exit in sales docs.
    http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/frameset.htm
    We have alredy implemented this solution at line item level. Let me know if you have any question.
    Regards,
    RS

  • PPCO0007 User Exit for  Changing Header Fields During Order  (CO40)

    .. Hi !!!!
      I need your help or suggestions,
      I need to change the standar order  before to save, i found the user exit PPCO0007,
      i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
      lost, and finally the system set the standard order.
        Someona know how can change the order and the the batch.
         Thanks
    Noemí Huerta

    Hi Noemi
    You can use the enchancement PPCO0007 (exit when the production order is saved).
    Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

  • Logic and User Exit for Availabilty Check in Sales Orders,

    Hi All,
    I have a requirement of creating a Sales order from an Inbound IDOC. Before saving i need to do all the validations for the sales order including the availabilty check for the sales orders. If it is not  fulfilled i need to reject the sales order creation.
    I am trying to search for the logic for the availabilty check of the sales order but i am not able to find one. Please help me out with that and also i need the user exit for the availabilty check for the sales orders. Please help me out with that one too.
    Regards,
    Sharadendu

    See this function Module for message type ORDERS
    IDOC_INPUT_ORDERS all validations are there in this Function Module .
    Please reward if useful.

  • User exit for the release of Purchase Order

    Hi Friends,
    I am searching for a user exit which should trigger at the time of Purchase Order release in ME29n transaction.
    If anyone can help me for the same....!!!
    I need the exact exit which triggers at the release of PO....
    Points will be rewarded for the needful replies.
    Regards,
    Mandeep.

    HI,
    Finding the user-exits of a SAP transaction code
    Enter the transaction code in which you are looking for the user-exit
    and it will list you the list of user-exits in the transaction code.
    Also a drill down is possible which will help you to branch to SMOD.
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    USE THIS PROGRAM TO GET ANY USER EXIT BY GIVING THE TCODE.
    MMFAB001            User exit for generation of release order
    MRFLB001            Control Items for Contract Release Order
    REGARDS,
    PRIYA.
    Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:21 AM
    Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:40 AM

  • User Exit for Changing Quantity in Process Order , COR1, COR2

    Hi All,
    Can anyone point me towards the light in User exit related to COR1 and COR2.After the Creation of Process order  while saving i need to write a code that rounds off the quantity values.
    I tried to change the values in the below user exits but i was not succesfull.
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines
    Reason was the data related tp materials was not accesble at this point and residing in resb internal table .
    Any suggestions ? Ideas  ?
    Thanks in advance,
    Gowri

    Hi,
      Try with BADI <b>WORKORDER_UPDATE</b>.
    Regards

  • User-Exit for Checking Customer and Sale order type in Sales Order Creation

    Hi Experts,
      While creating the Sales Order once i enter sold-to-party and enter line item, i have to check the customer against the sales order type.
    Please suggest me if any user-exit or enhancement or BADI available for it.
    Thanks & Regards,
    -VM

    Hi
    Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
    1) Goto se24 (Display class cl_exithandler)
    2) Double click on the method GET_INSTANCE.
    3) Put a break point at Line no.25 (CASE sy-subrc).
    Now
    4) Execute SAP standard transaction
    5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
    6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    7) This way you will find all the BADIs called on click of any button in any transaction.
    mark if helpful
    Regs,
    Tushar Mundlik

  • User-Exit for Pricing Strategy on return order.

    hi,
    If we have scale pricing implemented for returns how to arrive at the
    base price (Pr00) condition record value based on the (Ordered qty - Returned Qty) in this scenario which user exit we shall use??
    Thanks in advance,
    Regards,
    B.Anandh

    Use transaction VOFM, Formula, scale base and condition base.

  • User  exit for LT03 - Creation of transfer order.

    Hi All,
    In LT03 while creating a transfer order for delivery the system picks the storage unit in ascending order(FIFO - First in first out). Is there any badi available to change this picking order into descending order(LIFO- Last in first out). I have tried all the user exit related to transaction LT03, but nothing has served the purpose,has anybody faced this issue please share your views on this.
    Regards
    Sathya

    Hi Saravanan,
    you can try one of these FMs. It might be helpful:
    L_TO_CREATE_2_STEP_PICKING
    L_TO_CREATE_DN
    L_TO_CREATE_DN_MULTIPLE
    L_TO_CREATE_MOVE_SU
    L_TO_CREATE_MULTIPLE
    L_TO_CREATE_POSTING_CHANGE
    L_TO_CREATE_SINGLE
    L_TO_CREATE_TR .

  • User Exit  for ko01 ( Creation of Internal Order )

    Hi,
    My requirement is to validate the Business Area & Profit Center based on the Responsible Cost Center entered. EVEN if the Business Area & Profit Center are valid entries as per the data, they should be replaced by the Business Area, Profit Center with respective Responsible Cost Center entered by user. Please help me its urgent.
    Regards
    Vikram

    Hi
    The follwoing user exits and badis available:
                                                                                    Enhancement/ Business Add-in            Description                                                                               
    Enhancement                                                                               
    COOPA002                               
    Customer function for master data maint. - internal orders     
    COOPA003                               
    User-Defined Fields in the Order Master                        
    COOPA004                               
    Customer function: Print order master data                     
    COOPA_01                               
    Customer check modules for internal orders                                                                               
    Business Add-in                                                                               
    INTERNAL_ORDER_EXTND                
       Master Data Extension for Internal Order    
    If it is helpful rewards points.
    Regards
    Pratap.M

  • User status for component item in service order (plant maintenance order)

    Dear experts,
    I cannot find the customizing for assigning a user status (profile) to a component item of a service order.
    IW31 - tab components - mark an entry - click on button "component status"
    Can you help me?
    Best Regards,
    Philipp

    OSS message created. Answer from SAP:
    11.02.2011 - 15:04:46 CET - Antwort von SAP     
    Hello Mr. Miller,
    user status for components are not possible and not intended. I'm
    sorry that I cannot provide better news.
    Best regards
    Reinhard Gruber
    Senior Support Consultant
    AGS Primary Support,
    Business Suite & Technology
    SAP AG
    Therefore this message is closed... but not yet answered
    Edited by: Philipp Miller on Feb 11, 2011 3:28 PM

  • User exit for partner tab on sales order

    Hi All,
    Is there any user exit available for partners tab on sales order which should trigger when ever user changes anything from that tab like add/change remove any of the partners.
    Thanks,
    Suman.

    Hi Guys,
    Any Updates.
    Thanks,
    Suman.

Maybe you are looking for