User exit for delivery IDOC on save

Hi,
I have found some exists for delivery IDOC fun mod 'IDOC_OUTPUT_DELVRY'.
when I am testing from WE19, the debugger is not triggiring.
Pl suggest.
Thanks,
Krishna

Hi,
If you have the idoc no. get the partner details form it and go to we20 and put it there. and go to inbound parameters, and cleck on the message which your idoc belongs to. and go to the process code in it, and double click on it. where you can get the FM attached to it. put the break point there. opne your idoc from we19. click on the inbound FM. and place the FM. and click on debugger active check box and chose fore ground. it will take you to that FM. now debug that function module. in this process you may come across Exits you are looking for.
   Hope this will helps you.
Regards
Kiran

Similar Messages

  • Extended Idoc - User exit for delivery VL01 and Invoice VF01

    Hi Experts,
    We are developing Extended Idoc for order - cash cycle.The extended Idoc contains 4 extra fields.
    I want to know the User exits where i can populate the extended segment field values for VL01 and VF01 transactions.

    HI
    exits available for  VL01.
    VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
    VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
    V53W0001                                User exits for creating picking waves
    V53C0002                                W&S: RWE enhancement - shipping material type/time slot
    V53C0001                                Rough workload calculation in time per item
    V50S0001                                User Exits for Delivery Processing
    V50R0004                                Calculation of Stock for POs for Shipping Due Date List
    V50R0002                                Collective processing for delivery creation
    V50R0001                                Collective processing for delivery creation
    V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
    V50PSTAT                                Delivery: Item Status Calculation
    V02V0004                                User Exit for Staging Area Determination (Item)
    V02V0003                                User exit for gate + matl staging area determination (headr)
    V02V0002                                User exit for storage location determination
    V02V0001                                Sales area determination for stock transport order
    For VF01..
    Enhancement
    V61A0001                                Customer enhancement: Pricing
    V60P0001                                Data provision for additional fields for display in lists
    V60A0001                                Customer functions in the billing document
    V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
    V05I0001                                User exits for billing index
    SDVFX011                                Userexit for the komkcv- and kompcv-structures
    SDVFX010                                User exit item table for the customer lines
    SDVFX009                                Billing doc. processing KIDONO (payment reference number)
    SDVFX008                                User exit: Processing of transfer structures SD-FI
    SDVFX007                                User exit: Billing plan during transfer to Accounting
    SDVFX006                                User exit tax line in transfer to accounting
    SDVFX005                                User exit reserves in transfer to accounting
    SDVFX004                                User exit G/L line in transfer to accounting
    SDVFX003                                User exit cash clearing in transfer to accounting
    SDVFX002                                User exit for A/R line in transfer to accounting
    SDVFX001                                User exit header line in delivery to accounting
    J_3RSINV

  • User exit in Delivery after the SAVE button is pressed.

    When the Delivery gets picked and Post Goods issued , the Delivery quantity for example instead of 48,000 LBS may be little less say 47,345 LB. We need to update this number in the order quantity which will originally have 48,000 LBS.
    I need to update this quantity in the sales order VA02 after the delivery is saved. Whats the user exit AFTER the save button is pressed?
    Thank you in advance

    Hi,
    Check this User Exits related to Delivery,
    Delivery related exits
    V50PSTAT - Delivery: Item Status Calculation
    V50Q0001 - Delivery Monitor: User Exits for Filling Display Fields
    V50R0001 - Collective processing for delivery creation
    V50R0002 - Collective processing for delivery creation
    V50R0004 - Calculation of Stock for POs for Shipping Due Date List
    V50S0001 - User Exits for Delivery Processing
    V53C0001 - Rough workload calculation in time per item
    V53C0002 - W&S: RWE enhancement - shipping material type/time slot
    V53W0001 - User exits for creating picking waves
    VMDE0001 - Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002 - Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003 - Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004 - Shipping Interface: Message SDPACK (Packing, Inbound)
    V02V0001 - Sales area determination for stock transport order
    V02V0002 - User exit for storage location determination
    V02V0003 - User exit for gate + matl staging area determination (headr)
    V02V0004 - User Exit for Staging Area Determination (Item)MV50AFZ1 - User Exits for Delivery Processing
    MV50AFZ2 - User Exit for Batch Quantity Allocation
    MV50AFZ3 - LIPS-KOQUI (Picking is subject to confirmation) determination
    MV50AFZK - The user exits in this include can be used to fill the condition tables for material listing and
    material exclusion (KOMKG and KOMPG) and product selection (KOMKD and KOMPD) with own data.
    MV50AFZL - In delivery creation process for sales orders there is the possibility to restrict the delivery creation to some order items.
    If these order items are member of a delivery group, but not all items of
    this delivery group are includes in the restriction range of the order item nubers, you can specify in this routine what to do.
    MV50AFZP - This user exit can be used to modify change mode of pricing screens in delivery processing.
    MV50AFZZ - Users Exit for Batch Determination; LIPS-LGORT determination
    Thanks & regards,
    Dileep .C

  • User exit for  Delivery output execution

    Hello All,
             My query is i  need a delivery relevant  user exit for output trigger which the  specific order reason and for this only it should trigger in the VL01N (delivery) output. Kindly let me know if any user exit is there where i can give my condition(by checking the specific order reason from the proceding sales document)  and for that only it should trigger in the VL01N output . PLZ let me know the answer ASAP.

    Hi
    Check the following enhancements and BADI's
    Enhancement
    VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
    VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
    V53W0001                                User exits for creating picking waves
    V53C0002                                W&S: RWE enhancement - shipping material type/time slot
    V53C0001                                Rough workload calculation in time per item
    V50S0001                                User Exits for Delivery Processing
    V50R0004                                Calculation of Stock for POs for Shipping Due Date List
    V50R0002                                Collective processing for delivery creation
    V50R0001                                Collective processing for delivery creation
    V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
    V50PSTAT                                Delivery: Item Status Calculation
    V02V0004                                User Exit for Staging Area Determination (Item)
    V02V0003                                User exit for gate + matl staging area determination (headr
    V02V0002                                User exit for storage location determination
    V02V0001                                Sales area determination for stock transport order
    Business Add-in
    DELIVERY_ADDR_SAP                       Address Change in Delivery Processing
    DELIVERY_PUBLISH                        Announcement of delivery data during database update
    Also look at the Standard program of Delivery SAPMV50A
    for the user exit Include MV50AFZZ
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • User Exit for Delivery Updating

    Hi,
    I am creating one user exit for delivery ,
    My condition:
    If XLIKP-UPDKZ (Update indicator) = Update (U).
    Read table Deferred COGS Activity (Z1009) with key
    Delivery Number  eq LIKP-VBELN.
    If sy-subrc <> 0
    Exit.
    Else.
    If V50AGL-WARENAUSGANG=X (PGI is active)
    Update table Z1009 with
    WADAT_IST = XLIKP-WADAT_IST
    PGI_ERNAM = SY-UNAME
    PGI_ERDAT = SY-DATUM.
    where Delivery Number (DL_NO) eq LIKP-VBELN.
    If delivery updated successfully then no problem ,
    if not updated then I need to through error message to log.
    I need Function Module for this.
    Can u help me.

    These ar all the User Exits used in VL01N.
    Exit Name           Description
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT            Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002            Collective processing for delivery creation
    V50R0004            Calculation of Stock for POs for Shipping Due Date List
    V50S0001            User Exits for Delivery Processing
    V53C0001            Rough workload calculation in time per item
    V53C0002            W&S: RWE enhancement - shipping material type/time slot
    V53W0001            User exits for creating picking waves
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
    You can also look at BADI: LE_SHP_DELIVERY_PROC. It has several implementations which could be useful to you.

  • User-exit for delivery while assigning serial numbers(urgent)

    hi all,
    can u plz tell me the specific user exit for delivery (VL01n) while assigning serial numbers?
      i am getting the serial numbers for material in database table OBJK .i am also getting these serial no.s in IQ01.
       while doing delivery,i am going for extra-->serial number.at this time one screen for serial number is comming.those serial numbers which are stored in objk will transfer to this screen of delivery automatically.
      for this , i want a specific user-exit for delivery so that i can transfer the serial nos from objk to that screen of delivery.plz suggest .(urgent )
    any idea is highly appreaciated
    Regards
    pabitra

    You can find from below list of user exists
    V02V0001            Sales area determination for stock transport order          
    V02V0002            User exit for storage location determination                
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)             
    V50PSTAT            Delivery: Item Status Calculation                           
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields     
    V50R0001            Collective processing for delivery creation                 
    V50R0002            Collective processing for delivery creation                 
    V50R0004            Calculation of Stock for POs for Shipping Due Date List     
    V50S0001            User Exits for Delivery Processing                          
    V53C0001            Rough workload calculation in time per item                 
    V53C0002            W&S: RWE enhancement - shipping material type/time slot     
    V53W0001            User exits for creating picking waves                       
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc           
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)      
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)       
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)

  • USER-EXIT for DELIVERY--very very urgent

    Hi all,
    can u plz tell me the user-exit for delivery i.e this exit should be called after the delivery order is created.
    plz suggest some specific exit.it is very very urgent.
    Regards
    pabitra

    Rout ,
    u cannt find out user exits after the Creation.
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT            Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002            Collective processing for delivery creation
    V50R0004            Calculation of Stock for POs for Shipping Due Date List
    V50S0001            User Exits for Delivery Processing
    V53C0001            Rough workload calculation in time per item
    V53C0002            W&S: RWE enhancement - shipping material type/time slot
    V53W0001            User exits for creating picking waves
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
    *        FORM-Routinen für Userexits
             include mv50afzz.
             include mv50afz1.
             include mv50afz2.
             include mv50afz3.          "Userexit neu zu Release 3.0A
             include mv50afzk.          "Userexit 4.6A (KOMKG/KOMPG)
             include mv50afzl.          "Userexit 4.6A Liefergruppen
                                                                   "n_693000
             include mv50afzp.          "Userexit for pricing screen input
    Regards
    Prabhu

  • How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

    Hi all,
    I am new to this community p
    i have issue regarding  the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
    thanks,

    Hi ,
    welcome to SDN.
    You can select the appropriate Customer exit accrding to the available parameters .
    The list of exits available are 
    EXIT_SAPLVEDF_001
    EXIT_SAPLVEDF_002
    EXIT_SAPLVEDF_003
    EXIT_SAPLVEDF_004
    For Example , if you want  to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
    Hope this Helps
    Rgds
    Sree
    Edited by: Sree on Jul 23, 2010 12:11 PM

  • User exit for inbound idoc

    could anyone please tell the user exit for inbound idoc : ACC_POSTING_GL01

    I thnk the inbound idoc name is ACC_GL_POSTING01. User Exit for this is EXIT_SAPLACC4_001.
    *****Reward points if useful
    Regards,
    Kiran Bobbala

  • User exit for outgoing IDOC

    Hi friends,
    I want to find user exit for outbound idoc INVOIC, but i dont to how to do that.
    Please gve ur suggestions

    INVOIC
    Invoice / Billing document
    - FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
    - FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
    - FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
    - FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
    - FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
    - FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
    - FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
    - FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
    - FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
    - FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
    - MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
    - MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
    - MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
    - MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
    - MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting

  • User Exit for Delivery Creation

    Hi,
    I am looking for an User Exit for Delivery Creation, which should provide a Sales Order Number. This is required before Batch determination. Can any one help.

    Hi,
    I think you can try with MV50AFZ1 user exit.
    In move fields to LIKP and LIPS routine you can get the sales order.
    LIPS-VGBEL gives the sales order.
    Thanks,
    Rohan

  • NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

    I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
    F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
    THANKS/

    Hi Malka,
    It's possible set the system to mark automatically the delivery completed indicator.
    First you need to set the under delivery and over delivery tolerances.You do this in customizing:
    Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
    Once you set this, you can insert this value keys on Material Master Record for the materials.
    When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
    In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
    In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
    You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
    You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
    Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
    Regards,
    Rodrigo

  • Help required regarding user exit for STPSHH01 IDOC

    Need help regarding user exit.
    I append the structure of VTTP and add one field with the name of ZDELCST i.e Delivery cost so i want to update that table once the idoc will post.
    I have to write the user exit for this but i have no idea how to do this so kindly requesting someone to please write the code for me and i will be very grateful to him/her.
    The functional module is IDOC_INPUT_SHIPPL
    and there is a CALL CUSTOMER-FUNCTION '012'
    this will take us to function module EXIT_SAPLV56I_012
    This includes ZXV56U08
    Within this include in need to map the delivery cost from the idoc to the new append filed VTTP-ZDELCST

    Hi,
    use this FM to update ur shipment
    variables
    DATA: lo_tp_g_tra       TYPE v56e_shipment_activities, "Data to modify
          lo_tp_g_shp       TYPE v56e_shipment,
          lo_tp_g_log       TYPE v56e_logfile, " Errors function
    call the function to modify shipments
    CALL FUNCTION 'SD_SHIPMENT_PROCESS'
      IMPORTING
        e_logfile    = lo_tp_g_log
      CHANGING
        c_activities = lo_tp_g_tra
        c_shipment   = lo_tp_g_shp
      EXCEPTIONS
        error        = 1
        OTHERS       = 2.
    Thanks,
    Sendil.

  • User exit for Delivery Module

    Hi ,
    I had a include program in Development for Delivery module, "MV50AFZ1" in program "SAPMV50A", which is supposed to be a user exit.  So I transported that to production on clients requirement, but then its creating some problems for client, so he wants his previous program to be back.  But I can't change this "MV50AFZ1" program in development nor in Production.  So how could I bring that previous code in production. 
    Plz help, and if possible tell me how can I change "MV50AFZ1" program code.
    Thanks.
    Shailesh.

    check the below link for user exits in SD
    http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
    Some more links r here....
    User Exits In Sales Document Processing
    http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
    Get the access key from basis for the program SAPMV45A. And change the screen.
    First create a subscreen with that two fields, call that subscreen in the screen 8309.
    call subscreen s2 including 'SAPMV45A' '9002'.
    How to add custoim fields on the additiondata b tab of va01 and va02
    VA01/VA02  screen exit
    Re: Is there any enhancement  available .....for va01??
    Add a field in va01 transaction
    Additional Screen field in VA41 or VA01
    Here are the user exits available for creating PO.
    AMPL0001 - User subscreen for additional data on AMPL
    LMEDR001 - Enhancements to print program
    LMELA002 - Adopt batch no. from shipping notification when posting a GR
    LMELA010 - Inbound shipping notification: Transfer item data from IDOC
    LMEQR001 - User exit for source determination
    LMEXF001 - Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001 - Customer-Specific Source Determination in Retail
    M06B0001 - Role determination for purchase requisition release
    M06B0002 - Changes to comm. structure for purchase requisition release
    M06B0003 - Number range and document number
    M06B0004 - Number range and document number
    M06B0005 - Changes to comm. structure for overall release of requisn.
    M06E0004 - Changes to communication structure for release purch. doc.
    M06E0005 - Role determination for release of purchasing documents
    ME590001 - Grouping of requsitions for PO split in ME59
    MEETA001 - Define schedule line type (backlog, immed. req., preview)
    MEFLD004 - Determine earliest delivery date f. check w. GR (only PO)
    MELAB001 - Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1 - Enhancement to Document Overview ME21N/ME51N
    MEVME001 - WE default quantity calc. and over/ underdelivery tolerance
    MM06E001 - User exits for EDI inbound and outbound purchasing documents
    MM06E003 - Number range and document number
    MM06E004 - Control import data screens in purchase order
    MM06E005 - Customer fields in purchasing document
    MM06E007 - Change document for requisitions upon conversion into PO
    MM06E008 - Monitoring of contr. target value in case of release orders
    MM06E009 - Relevant texts for "Texts exist" indicator
    MM06E010 - Field selection for vendor address
    MMAL0001 - ALE source list distribution: Outbound processing
    MMAL0002 - ALE source list distribution: Inbound processing
    MMAL0003 - ALE purcasing info record distribution: Outbound processing
    MMAL0004 - ALE purchasing info record distribution: Inbound processing
    MMDA0001 - Default delivery addresses
    MMFAB001 - User exit for generation of release order
    MRFLB001 - Control Items for Contract Release Order
    EXIT_SAPMM06E_001 Other Number Range or Own Document Number
    EXIT_SAPMM06E_004 User Exit for Cust.-Specific Control of Import Data Screens in Purchasing
    EXIT_SAPMM06E_005 Field Selection Control: Vendor Address Screen
    EXIT_SAPMM06E_006 Export Data to Customer Subscreen for Purchasing Document Header (PBO)
    EXIT_SAPMM06E_007 Export Data to Customer Subscreen for Purchasing Document Header (PAI)
    EXIT_SAPMM06E_008 Import Data from Customer Subscreen for Purchasing Document Header
    EXIT_SAPMM06E_009 Reset Customer Data at Beginning of New Document (Without Dialog)
    EXIT_SAPMM06E_010 Export of Service RFQ Data
    EXIT_SAPMM06E_011 Import Service Prices for Quotation
    EXIT_SAPMM06E_012 Check Customer-Specific Data Before Saving
    EXIT_SAPMM06E_013 Update Customer-Specific Data in Purchasing Document
    EXIT_SAPMM06E_014 Read Customer-Specific Data when Importing Purchasing Document
    EXIT_SAPMM06E_016 Export Data to Customer Subscreen for Purchasing Document Item (PBO)
    EXIT_SAPMM06E_017 Export Data to Customer Subscreen for Purchasing Document Item (PAI)
    EXIT_SAPMM06E_018 Import Data from Customer Subscreen for Purchasing Document Item
    EXIT_SAPMM06E_020 User Exit: Change Document for Requisitions (Conversion into PO)
    EXIT_SAPMM06E_021 Fulfillment of Target Value: Release Orders Against a Contract
    EXIT_SAPMM06E_022 Relevant Texts for "Texts Exist" Indicator
    EXIT_SAPMM06E_023 Definition of Relevant Texts for "Texts Exist" Indicator
    EXIT_SAPMM06E_024 Customer Enhancement: Activate PReq Block
    user exit for sto
    Regards.

  • HOW TO WRITE USER EXIT FOR EXTENDED IDOC

    Can somebody please help me as i need the user exit code for Shipment idoc.
    I append the structure of VTTP and add one field with the name of ZDELCST i.e Delivery cost so i want to update that table once the idoc will post.
    I have to write the user exit for this but i have no idea how to do this so kindly requesting someone to please write the code for me and i will be very grateful to him/her.
    The functional module is IDOC_INPUT_SHIPPL
    and there is a CALL CUSTOMER-FUNCTION '012'
    this will take us to function module EXIT_SAPLV56I_012
    This includes ZXV56U08
    Within this include in need to map the delivery cost from the idoc to the new append filed VTTP-ZDELCST

    hi ,
    'EXIT_SAPLHRBEN00GENERAL_014'
    1)Goto CMOD  tcode.
    2)Click on Utilites on Menu bar.
    3)Press Shift+F9, below in component name enter
    EXIT_SAPLHRBEN00GENERAL_014,
    4)F8 , then you will get Exit name PBEN0014
    Double Click  again Double Click you will get function
    FUNCTION EXIT_SAPLHRBEN00GENERAL_014.
    within this onel include file is there.
    INCLUDE ZXPBEU14.
    here you will write your Enhanc Code.
    Reward if , you got soln,
    Thanks.

Maybe you are looking for