User-Exit for document changes (status)

Hi!
I'm looking for an user-exit where I can check if the status of the document has been changed. Therefore I found the exit "EXIT_SAPLCV110_004" with the include "ZXCV110U04" which is triggered when a document (transaction CV02N) is saved. The problem is that there is no structure of the document provided so I cannot check the status of it! The interface if this exit is just
FUNCTION EXIT_SAPLCV110_004.
""Lokale Schnittstelle:
*" CHANGING
*" REFERENCE(PFX_OKCODE) TYPE SY-UCOMM
INCLUDE ZXCV110U04 .
ENDFUNCTION.
Is there another exit or how can I check if the status has changed for each document?
Thanks,
Konrad

You can code in EXIT_SAPLCV00_001. Write your code in the program ZXCV001U01. This has DRAW structure valeus and also DRAZ Item details.
FUNCTION EXIT_SAPLCV00_001.
""Lokale Schnittstelle:
*"       IMPORTING
*"             VALUE(I_DRAW) LIKE DRAW STRUCTURE DRAW OPTIONAL
*"             VALUE(I_OK_CODE) OPTIONAL
*"             VALUE(SOURCEPATH) LIKE DRAW-FILEP OPTIONAL
*"             VALUE(SOURCEFILE) LIKE DRAW-FILEP OPTIONAL
*"             VALUE(TARGETPATH) LIKE DRAW-FILEP OPTIONAL
*"             VALUE(TARGETFILE) LIKE DRAW-FILEP OPTIONAL
*"       TABLES
*"              I_INTDRAZ1 STRUCTURE DRAZ OPTIONAL
*"              I_INTDRAZ2 STRUCTURE DRAZ OPTIONAL
*"       EXCEPTIONS
*"              ERROR
INCLUDE ZXCV001U01 .
ENDFUNCTION.
Hope this will help you to check the conditions.

Similar Messages

User exit for Production Order status

Hi all ,
Pl tell me about the : user exit for Production Order status
( i want CLSD status after settlement of the Production order .)
regards,

Hi,
for production order you have exits PPCO0001 - PPCO0023. In transaction SMOD you can see the documentation for all this exits. Actually I think exit PPCO0007 could be a possiblity for you. This exit is called by saving the order.
But maybe it would be better for you to use a special status profile? A user status is set if settlement status is set.
Also BADI WORKORDER_UPDATE could be interessting for you.
Regards,
Sabine

BAPI or USER EXIT for MIRO: Change PO reference amount (on-line)

Hi, I need to find a BAPI or USER EXIT for TX MIRO to change/modify the PO reference amount for the selected positions (using the given checkbox) just after selecting them (when pressing ENTER). Any ideas? Thanks.

Hello Suman,
Please follow this steps to get the list of Userexits for the TCODE MIRO read there short description to get the appropriate EXIT.
Steps.
1. Goto the Tcode
2. System-> Status.
3. Copy the program name, find the package for the program.
4. Go to SMOD (tccode) press F4 -> Click on "Information System" Push Button->
Enter the Package name-> and press the enter button.
5. Now you get the list of Userexits. Need to select one by looking into its short description.
Hope this solves your issue,
Cheers,
Suvendu

User exit for MIGO - Change on Posting A/C Code Upon Saving.

Hi,
I have a requirement to to split the GR/IR clearing account during the posting of goods receipt in MIGO by filled in BSEG-HKONT with specify a/c code (hard coded).
I'm not able to find any user exit to change the value in BSEG-HKONT
while click on save.
Is there any suggestion on it?
Thanks.

Hi ,
Try with the following User Exits for MIGO.
MB_CF001 Customer Function Exit in the Case of Updating a Mat. D
MBCF0002 Customer function exit: Segment text in material doc. i
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREA
MBCF0011 Read from RESB and RKPF for print list in MB26
Thanks,
SVREDDY

User Exits for Document Info Record : CV01N in DMS

Hi Experts
My scenario is: We have Configured DMS in which new document type created Z01 is for MS word documents. I have assigned default Work Station Application : DOC to Z01 document type.
But my problem is : while creating Info record : CV01n with Z01 document type during file creation system is showing default Application : DOC, But in help user can select either XL, or PPT instead of DOC.
My requirement is : I need to restrict : other work station applications to the particular document type, i.e. for Z01 document type - allowed work Station Application is : DOC. System doesnot allow user to select other application instead of DOC.
Where Can I Restrict ?? Is there any User Exits available to controle this function
Please help
Satish Babu

Hi,
Try these exits.
CV000001            Check-in enhancement for document management
CV110001            DMS: Enhancements for DMS Dialog (FB: CV110)
CVDS0001            User exits for ALE DMS (DOCMAS)
Hope this helps u.
Thanks.

User exit for block changes in PO if movement 101 occured

Hi,
Does anyone knows if there is a user-exit to block changes in the items of a PO, if there was a GR (mov 101) for that item (and considering that didn't was a mov 102 for the same item)?
Thanks,
Pedro Mariano

Hi
Try to Use me Badi ME_PROCESS_PO_CUST
surya

User Exit for PO change

Hello Friends,
I'm looking for a User exit/BADi which I can use to change the quantity of PO while posting the Goods Receipt from MIGO. If you know one, could you please let me know.Thanks a lot in advance.
Regards,
Satya

Satya,
BADI MB_DOCUMENT_BADI_SAP will do that.
Both the Methods,
MB_DOCUMENT_UPDATE - Creation of a Material Document. In 'Update Task'
MB_DOCUMENT_CHANGE- Changing of a Material Document. In 'Update Task'
Have access to structures MKPF and MSEG.
You shud be good.
Le'me your proceeds.
Hope this helps
Vinodh Balakrishnan

Plant Maintenance Order - BADi/user exit for operation change

I need to send a mail on plant maintenance order (IW32) save event if there is any change in operation - requirement assignment person. Means if the operation is assigned to a person then notify that person on order save event.
Can anybody help me on this in finding some BADi or user exit?
Thanks in advance.

Hi,
User Exits:-
IWO10009 Customer Check for 'Save' Event
BAdI:-
ALM_ME_001_ORDER Order/Operation Data
ALM_ME_ORDER_OPER MAM 1.0 Order Operations
IBAPI_ALM_OPR_GETDET BADI for Reading Fields for BAPI_ALM_OPERATION_GET_DETAIL
Check with these User Exits & BAdI's.
regards,
Venkatesan Anandan

User Exit for ME21/ME22

Hi Guys,
Can anyone give me the user exit for saving / changing the data when a purchase order is being saved..
thanks in advance,
Kittu.

Hi
You can use the BADI
ME_PROCESS_PO_CUST
There are lot of Exits for Purchasing
check the following exits if you need
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
Reward points if useful
Regards
Anji

User Exit for Changing G/L account in Accounting Document

hi all,
This one is urgent for me. If you guys can help.
Iam looking for a user-exit to change the G/L account while posting the accounting document.
If someone has worked on a similar user-exit Kindly help.
Thanks and Regards
Varun

Hi Experts,
The requirement is to change the GL account when PGI is done for a delivery.
I have coded in the above user exit for changing the GL account. I am facing the issue here.
I am changing the GL account through a user exit, but even before the user exit is called the standard SAP is throwing a error.
the Error is GL account is blocked for posting in the company code. This check is happening for the GL account what standard SAP proposes from the customization. The GL account that is getting picked is blocked in SPRO for posting in the mentioned company code. Because of the error message, our z code is not getting executed.
Kindly suggest if some user exits that can be used even before this error message. or let me know if you have any suggestions to over come this.
I have coded this in the enhancement point. Include MM07MFK0_KONTIERUNG_PRUEFEN and subroutine kontierung_pruefen.
Thanks,

User-Exit for changing Sales Document Number - Urgent

Hi Experts ,
 Please suggest me the User Exit for changing Sales Document Number.
thanks,
Jayesh

hi jayesh,
chech this exit-----EXIT_SAPFV45S_002.
this exit's description says " Change Sales Document Using Configuration".
Other available exits are
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
Reward me if useful..........
Harimanjesh AN

USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT

Hi,
Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
Regards,

Hi,
There is another user exit for updating material document data Upon posting is MB_CF001
I hope this will fullfill you.
Prem

User Exit for Changing Quantity in Process Order , COR1, COR2

Hi All,
Can anyone point me towards the light in User exit related to COR1 and COR2.After the Creation of Process order while saving i need to write a code that rounds off the quantity values.
I tried to change the values in the below user exits but i was not succesfull.
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
Reason was the data related tp materials was not accesble at this point and residing in resb internal table .
Any suggestions ? Ideas ?
Thanks in advance,
Gowri

Hi,
Try with BADI WORKORDER_UPDATE.
Regards

User exit for changing Sales order lines.

Hello experts ,
I want to delete the field "ROUTE" from all of the orders lines in sales orders, I have been using "USEREXIT_SAVE_DOCUMENT_PREPARE" but it does not seems to do the job.
What is the name of user exit that i have to use for this task and which structure should be used, is it xvbap ? is it vbap ?
Thanks for the help.
Avi.

Hi,
find the user exit u required.
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
Best regards,
venkatawamy.y

User exit for VL02n to trigger error message by checking PFI status

Please help me in finding out the exact user exit for the following enhancements:
1.When i go to VL02n transaction and try to delete the line item in the delivery for which already PFI(Profarma Invoice) is created an error message should be triggered by us stating "Proforma already created"
2.Error message will have relevant PFI details and instruction to user to Cancel [Complete] the PFI as the first step in case of delivery item deletion. User will be allowed to delete the item only after the PFI is set to cancelled status.
3.An information message should be generated automatically if user tries to change the quantity in delivery document line item, if PFI is already created for the same
4.Information message will have relevant PFI details but allows the user to change the quantity.
How can this be done? Thro' which user exit?
Please post your suggesstions?

Hi,
Use the BADI "LE_SHP_DELIVERY_PROC". Methods "FILL_DELIVERY_ITEM", "CHANGE_DELIVERY_ITEM", "CHECK_ITEM_DELETION" will be useful
for your requirement.
Regards
Vinod

User-Exit for document changes (status)

Similar Messages

Maybe you are looking for