USER EXIT FOR IDOC CREATION AND TRIGGER

I needed a user exit in which I could call my function module .The requirement is that whenever a sales order is created or changed ,on saving of the sales order I need  to trigger an IDOC .Inside my function module I plan to use the MASTER_IDOC_DISTRIBUTE
Can anyone tell me if the above logic can work and please tell me the name of the user exit which I can use?

Hi
Instead of User exit, you can think of using SAP Standard Output type functionality.
Ask your functional consultant to create a Output type with Medium 6 and do the necessary outbound configuration in the Partner profile WE20 transaciton.
Regards
Madhan D
Edited by: Madhan Doraikannan on Dec 10, 2008 10:49 AM

Similar Messages

  • User exit for IDOC creation

    When a credit memo is created an IDOC should be generated !
    IS there any user exit where i can associate the idoc generation code when the credit memo is created?
    if soo then what it is !
    Edited by: Alvaro Tejada Galindo on Feb 19, 2008 5:52 PM

    Just create an output type for billing and condition record to trigger the output.
    Regards,
    John.

  • System status or user status for IDOC creation and processing for prod ord

    All
    I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
    I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
    Second question, which idocs should I use  to confirm, teco and cancel the production orders from an external system?
    Thanks
    Evan

    For the first part of your query refer to the technical forums.
    For the second part - refer to Idoc - LOIPRO01, it has a segment for Order status, that should be of interest.
    Attn Moderators
    I think it would be better to move this thread to a technical forum, so the requester can get the most relevant information.

  • BAdI: or User Exit  for Campaign Creation

    Hi all,
              we are working in CRM 5.0,
    we have a Requirement like :
          when we create the campaign it should check higher level project ID        (marketing Plan ID)
          if it is there it should permit for create campaign else it ll show error...
    Any BAdI: or User Exit  for Campaign Creation?
    I ll geive reward points....
    Rhanks & Regards,
    Ganesh

    Dear Ganesh,
    As campaign can be created and executed individually also, it will never check for higher level project ID.
    Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan.

  • User exit for tcode ME21N and ME22N

    Hi everyone
    Can anybody tell me the user exits found in the tcodes ME21N nad ME22N, when saving a PO?
    Regards
    Anjali

    AMPL0001            User subscreen for additional data on AMPL
    LMEDR001            Enhancements to print program
    LMELA002            Adopt batch no. from shipping notification when posting a GR
    LMELA010            Inbound shipping notification: Transfer item data from IDOC
    LMEQR001            User exit for source determination
    LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001            Individual customer source determination in Retail
    M06B0001            Role determination for purchase requisition release
    M06B0002            Changes to comm. structure for purchase requisition release
    M06B0003            Number range and document number
    M06B0004            Number range and document number
    M06B0005            Changes to comm. structure for overall release of requisn.
    M06E0004            Changes to communication structure for release purch. doc.
    M06E0005            Role determination for release of purchasing documents
    ME590001            Grouping of requsitions for PO split in ME59
    MEETA001            Define schedule line type (backlog, immed. req., preview)
    MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
    MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
    MEVME001            WE default quantity calc. and over/ underdelivery tolerance
    MM06E001            User exits for EDI inbound and outbound purchasing documents
    MM06E003            Number range and document number
    MM06E004            Control import data screens in purchase order
    MM06E005            Customer fields in purchasing document
    MM06E007            Change document for requisitions upon conversion into PO
    MM06E008            Monitoring of contr. target value in case of release orders
    MM06E009            Relevant texts for "Texts exist" indicator
    MM06E010            Field selection for vendor address
    MMAL0001            ALE source list distribution: Outbound processing
    MMAL0002            ALE source list distribution: Inbound processing
    MMAL0003            ALE purcasing info record distribution: Outbound processing
    MMAL0004            ALE purchasing info record distribution: Inbound processing
    MMDA0001            Default delivery addresses
    MMFAB001            User exit for generation of release order
    MRFLB001            Control Items for Contract Release Order
    MEQUERY1            Enhancement to Document Overview ME21N/ME51N
    MM06E011            Activate PReq Block
    LMEKO001            Extend communications structure KOMK for pricing
    LMEKO002            Extend communications structure KOMP for pricing
    If useful reward.
    Vasanth

  • User Exit for Delivery Creation

    Hi,
    I am looking for an User Exit for Delivery Creation, which should provide a Sales Order Number. This is required before Batch determination. Can any one help.

    Hi,
    I think you can try with MV50AFZ1 user exit.
    In move fields to LIKP and LIPS routine you can get the sales order.
    LIPS-VGBEL gives the sales order.
    Thanks,
    Rohan

  • BAdI: or User Exit for Campaign Creation   IN CRM 5.0

    Hi all,
    we are working in CRM 5.0,
    we have a Requirement like :
    when we create the campaign it should check higher level project ID (marketing Plan ID)
    if it is there it should permit for create campaign else it ll show error...
    Any BAdI: or User Exit for Campaign Creation?
    I ll geive reward points....
    Rhanks & Regards,
    Ganesh

    IN WHICH TRANSACTION U R CREATING CAMPAIGN ??

  • Extended Idoc - User exit for delivery VL01 and Invoice VF01

    Hi Experts,
    We are developing Extended Idoc for order - cash cycle.The extended Idoc contains 4 extra fields.
    I want to know the User exits where i can populate the extended segment field values for VL01 and VF01 transactions.

    HI
    exits available for  VL01.
    VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
    VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
    V53W0001                                User exits for creating picking waves
    V53C0002                                W&S: RWE enhancement - shipping material type/time slot
    V53C0001                                Rough workload calculation in time per item
    V50S0001                                User Exits for Delivery Processing
    V50R0004                                Calculation of Stock for POs for Shipping Due Date List
    V50R0002                                Collective processing for delivery creation
    V50R0001                                Collective processing for delivery creation
    V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
    V50PSTAT                                Delivery: Item Status Calculation
    V02V0004                                User Exit for Staging Area Determination (Item)
    V02V0003                                User exit for gate + matl staging area determination (headr)
    V02V0002                                User exit for storage location determination
    V02V0001                                Sales area determination for stock transport order
    For VF01..
    Enhancement
    V61A0001                                Customer enhancement: Pricing
    V60P0001                                Data provision for additional fields for display in lists
    V60A0001                                Customer functions in the billing document
    V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
    V05I0001                                User exits for billing index
    SDVFX011                                Userexit for the komkcv- and kompcv-structures
    SDVFX010                                User exit item table for the customer lines
    SDVFX009                                Billing doc. processing KIDONO (payment reference number)
    SDVFX008                                User exit: Processing of transfer structures SD-FI
    SDVFX007                                User exit: Billing plan during transfer to Accounting
    SDVFX006                                User exit tax line in transfer to accounting
    SDVFX005                                User exit reserves in transfer to accounting
    SDVFX004                                User exit G/L line in transfer to accounting
    SDVFX003                                User exit cash clearing in transfer to accounting
    SDVFX002                                User exit for A/R line in transfer to accounting
    SDVFX001                                User exit header line in delivery to accounting
    J_3RSINV

  • User Exits for Invoice creation ,cancellation and sales return

    Hi Gurus,
    Pl help me it's very urgent.
    I did not find any user exit invoice creation so i wrote the following code in include program
    MV60AF0B_BELEG_SICHERN.
    This code is to update the Z*table while saving invoice ,cancellation and sales return.
    The code modification is like below
          FORM BELEG_SICHERN                                            *
          Buchen Fakturabelege                                          *
    FORM BELEG_SICHERN.
      READ TABLE XVBRK INDEX 1.
      IF SY-SUBRC NE 0.
        CALL FUNCTION 'DEQUEUE_ALL'.
        MESSAGE S032.
        EXIT.
      ENDIF.
      IF SAMH_MOD = ON.
        EXPORT XKOMFK TO MEMORY ID 'SDBILLDL'.
      ENDIF.
      DATA: CALC_TYPE.
      IF REBATE_DETERMINED = 'Y'.
        CALC_TYPE = 'A'.
      ELSE.
        CALC_TYPE = 'I'.
      ENDIF.
    *{   INSERT         RD1K903017                                        1
    Work Area*********************
    data : wa_xvbrk type VBRKVB.
    data : wa_xvbrp type vbrpvb.
    data : wa_zmigo type zmigo.
    data : wa_vbrp type vbrp.
    Internal table Creation*******
    DATA:  BEGIN OF tab_XVBRP OCCURS 100.
             INCLUDE STRUCTURE VBRPVB.
    DATA:  END OF tab_XVBRP.
    data : begin of tab_vbeln occurs 10,
           vbeln type vbrk-vbeln,
           knumv type vbrk-knumv,
           end of tab_vbeln.
    data : tab_zmigo type table of zmigo.
    data : tab_vbrp type table of vbrp.
    *****Data declaration*************
    data : v_no_of_inv type i.
    data : v_vbeln_no(10) type n.
    data : v_last_inv_no(10) type n.
    data : v_first_inv_no(10) type c.
    data : v_tot_qty type i.
    data : v_frbnr type mkpf-frbnr.
    *******Ranges*********************
    ranges : r_vbeln for vbrk-vbeln.
    *****Populating IT****************
    tab_xvbrp[] = xvbrp[].
    describe table xvbrk lines v_no_of_inv.
    *}   INSERT
      CALL FUNCTION 'RV_INVOICE_DOCUMENT_ADD'
           EXPORTING
                VBSK_I           = VBSK
                WITH_POSTING     = 'A'
                PREISFINDUNGSART = CALC_TYPE
           IMPORTING
                VBSK_E           = VBSK
           TABLES
                XKOMFK           = XKOMFK
                XTHEAD           = XTHEAD
                XVBFS            = XVBFS
                XVBSS            = XVBSS
                XVBRK            = XVBRK
                XVBRP            = XVBRP
                XVBPA            = XVBPA
                XKOMV            = XKOMV.
    *{   INSERT         RD1K903017                                        2
    data : v_count type i,v_fkimg type i .
    data : v_no_of_records(10) type n.
    wa_xvbrk = xvbrk.
    ********Selecting the last rec no from ZMIGO
          select max( sr_no ) from zmigo into v_no_of_records.
    *****If Distribution channel is not ZB*********
    if  wa_xvbrk-vtweg ne 'ZB' and ( wa_xvbrk-fkart = 'ZRIN' or wa_xvbrk-fkart = 'ZRTE' ).
    if v_no_of_inv = 1.              " Process only when there is one invoice
    loop at tab_xvbrp into wa_xvbrp  where (           matnr ne 'CDGSTP0001'       and
                                                       matnr ne 'CD-RW'            and
                                                       matnr ne 'CD-RW65OHS'       and
                                                       matnr ne 'CABLE'            and
                                                       matnr ne 'CD-R'             and
                                                       matnr ne 'CDQ80N4'          and
                                                       matnr ne 'GENERAL'          and
                                                       matnr ne 'NERO'             and
                                                       matnr ne 'OTHERS'           and
                                                       matnr ne 'SPARE PARTS'      and
                                                       matnr ne 'PROMO ITEM'       and
                                                       matnr ne 'PROMO-1'          and
                                                       matnr ne 'PROMO-2'          and
                                                       matnr ne 'PROMO-3'          and
                                                       matnr ne 'PROMO-4'          and
                                                       matnr ne 'PROMO-5'          and
                                                       matnr ne 'PROMO-6'          and
                                                       matnr ne 'PROMO-7'          and
                                                       matnr ne 'PROMO-8'          and
                                                       matnr ne 'PROMO-9'          and
                                                       matnr ne 'PROMO-10' ).
    v_fkimg = wa_xvbrp-fkimg .
    v_fkimg = v_fkimg / 1000.
                do v_fkimg times.
                  v_no_of_records = v_no_of_records + 1.
                  wa_zmigo-sr_no = v_no_of_records.
                  wa_zmigo-po_no = wa_xvbrk-vbeln.
                  wa_zmigo-item_no  = wa_xvbrp-posnr.
                 wa_zmigo-mblnr  = wa_xmkpf-mblnr.
                  wa_zmigo-doc_type = wa_xvbrk-fkart.
                  wa_zmigo-posting_date = wa_xvbrk-fkdat.
                  wa_zmigo-created_on = sy-datum.
                  wa_zmigo-created_time = sy-uzeit.
                 wa_zmigo-bill_lno = v_frbnr.
                  wa_zmigo-material = wa_xvbrp-matnr.
                 wa_zmigo-inv_no = wa_xvbrk-vbeln.
                 wa_zmigo-inv_item_no = wa_xvbrp-posnr.
                  wa_zmigo-plant = wa_xvbrp-werks.
                  wa_zmigo-inv_date = wa_xvbrk-fkdat.
                  wa_zmigo-customer = wa_xvbrk-kunag.
                  wa_zmigo-unit = 1.
                  wa_zmigo-mtype = '601'.
                  insert into zmigo values wa_zmigo.
                enddo.
                clear : wa_zmigo.
    endloop.
    clear : v_count,v_fkimg,wa_zmigo.
    refresh tab_zmigo[].
    clear v_no_of_inv.
    else.                              "When there are Split Invoices
    v_last_inv_no = wa_xvbrk-vbeln.
    v_vbeln_no = v_last_inv_no - v_no_of_inv + 1.
    v_first_inv_no = v_vbeln_no.
    sort tab_xvbrp by vbeln.
    loop at tab_xvbrp into wa_xvbrp  where (           matnr ne 'CDGSTP0001'       and
                                                       matnr ne 'CD-RW'            and
                                                       matnr ne 'CD-RW65OHS'       and
                                                       matnr ne 'CABLE'            and
                                                       matnr ne 'CD-R'             and
                                                       matnr ne 'CDQ80N4'          and
                                                       matnr ne 'GENERAL'          and
                                                       matnr ne 'NERO'             and
                                                       matnr ne 'OTHERS'           and
                                                       matnr ne 'SPARE PARTS'      and
                                                       matnr ne 'PROMO ITEM'       and
                                                       matnr ne 'PROMO-1'          and
                                                       matnr ne 'PROMO-2'          and
                                                       matnr ne 'PROMO-3'          and
                                                       matnr ne 'PROMO-4'          and
                                                       matnr ne 'PROMO-5'          and
                                                       matnr ne 'PROMO-6'          and
                                                       matnr ne 'PROMO-7'          and
                                                       matnr ne 'PROMO-8'          and
                                                       matnr ne 'PROMO-9'          and
                                                       matnr ne 'PROMO-10' ).
    v_fkimg = wa_xvbrp-fkimg .
    v_fkimg = v_fkimg / 1000.
                do v_fkimg times.
                  v_no_of_records = v_no_of_records + 1.
                  wa_zmigo-sr_no = v_no_of_records.
                  wa_zmigo-po_no = v_vbeln_no.                      "wa_vbrp-vbeln.
                  wa_zmigo-item_no  = wa_xvbrp-posnr.
                 wa_zmigo-mblnr  = wa_xmkpf-mblnr.
                  wa_zmigo-doc_type = wa_xvbrk-fkart.
                  wa_zmigo-posting_date = wa_xvbrk-fkdat.
                  wa_zmigo-created_on = sy-datum.
                  wa_zmigo-created_time = sy-uzeit.
                 wa_zmigo-bill_lno = v_frbnr.
                  wa_zmigo-material = wa_xvbrp-matnr.
                 wa_zmigo-inv_no = v_vbeln_no.
                 wa_zmigo-inv_item_no = wa_xvbrp-posnr.
                  wa_zmigo-plant = wa_xvbrp-werks.
                  wa_zmigo-inv_date = wa_xvbrk-fkdat.
                  wa_zmigo-customer = wa_xvbrk-kunag.
                  wa_zmigo-unit = 1.
                  wa_zmigo-mtype = '601'.
                  insert into zmigo values wa_zmigo.
                enddo.
                clear : wa_zmigo.
    at end of vbeln.
    v_vbeln_no = v_vbeln_no + 1.
    endat.
    clear : v_count,v_fkimg,wa_zmigo.
    refresh tab_zmigo[].
    endloop.
    endif.                             "End of first 2nd IF.
    clear : v_no_of_inv, v_vbeln_no.
    endif.
    ****************Sales return************************************
    if  wa_xvbrk-fkart = 'ZRRE' and wa_xvbrk-vtweg ne 'ZB'.
    loop at tab_xvbrp into wa_xvbrp where (            matnr ne 'CDGSTP0001'       and
                                                       matnr ne 'CD-RW'            and
                                                       matnr ne 'CD-RW65OHS'       and
                                                       matnr ne 'CABLE'            and
                                                       matnr ne 'CD-R'             and
                                                       matnr ne 'CDQ80N4'          and
                                                       matnr ne 'GENERAL'          and
                                                       matnr ne 'NERO'             and
                                                       matnr ne 'OTHERS'           and
                                                       matnr ne 'SPARE PARTS'      and
                                                       matnr ne 'PROMO ITEM'       and
                                                       matnr ne 'PROMO-1'          and
                                                       matnr ne 'PROMO-2'          and
                                                       matnr ne 'PROMO-3'          and
                                                       matnr ne 'PROMO-4'          and
                                                       matnr ne 'PROMO-5'          and
                                                       matnr ne 'PROMO-6'          and
                                                       matnr ne 'PROMO-7'          and
                                                       matnr ne 'PROMO-8'          and
                                                       matnr ne 'PROMO-9'          and
                                                       matnr ne 'PROMO-10' ).
             v_fkimg = wa_xvbrp-fkimg.
             v_fkimg = v_fkimg / 1000.
             v_tot_qty = v_tot_qty + v_fkimg.
              do v_fkimg times.
                v_no_of_records = v_no_of_records + 1.
                wa_zmigo-sr_no = v_no_of_records.
                wa_zmigo-po_no = wa_xvbrk-vbeln.
                wa_zmigo-item_no  = wa_xvbrp-posnr.
                wa_zmigo-doc_type = wa_xvbrk-fkart.
                wa_zmigo-posting_date = wa_xvbrk-fkdat.
                wa_zmigo-created_on = sy-datum.
                wa_zmigo-created_time = sy-uzeit.
                wa_zmigo-material = wa_xvbrp-matnr.
               wa_zmigo-inv_no = wa_xvbrk-vbeln.
               wa_zmigo-inv_item_no = wa_xvbrp-posnr.
                wa_zmigo-plant = wa_xvbrp-werks.
                wa_zmigo-inv_date = wa_xvbrk-fkdat.
                wa_zmigo-customer = wa_xvbrk-kunag.
                wa_zmigo-unit = 1.
                wa_zmigo-mtype = '651'.
                condense wa_xvbrk-xblnr.
                wa_zmigo-reference = wa_xvbrk-xblnr.
    ********Bill of lading no**
               select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
               if sy-subrc eq 0.
               wa_zmigo-bill_lno = v_frbnr.
               endif.
                insert into zmigo values wa_zmigo.
              enddo.
              clear : wa_zmigo,wa_xvbrp , v_fkimg, v_frbnr.
    endloop.
    endif.
    *******Invoice Cancellation*****************************
    if  wa_xvbrk-fkart = 'ZRS1' and wa_xvbrk-vtweg ne 'ZB'.
    delete tab_xvbrp[] where shkzg eq 'X'.
    loop at tab_xvbrp into wa_xvbrp where (            matnr ne 'CDGSTP0001'       and
                                                       matnr ne 'CD-RW'            and
                                                       matnr ne 'CD-RW65OHS'       and
                                                       matnr ne 'CABLE'            and
                                                       matnr ne 'CD-R'             and
                                                       matnr ne 'CDQ80N4'          and
                                                       matnr ne 'GENERAL'          and
                                                       matnr ne 'NERO'             and
                                                       matnr ne 'OTHERS'           and
                                                       matnr ne 'SPARE PARTS'      and
                                                       matnr ne 'PROMO ITEM'       and
                                                       matnr ne 'PROMO-1'          and
                                                       matnr ne 'PROMO-2'          and
                                                       matnr ne 'PROMO-3'          and
                                                       matnr ne 'PROMO-4'          and
                                                       matnr ne 'PROMO-5'          and
                                                       matnr ne 'PROMO-6'          and
                                                       matnr ne 'PROMO-7'          and
                                                       matnr ne 'PROMO-8'          and
                                                       matnr ne 'PROMO-9'          and
                                                       matnr ne 'PROMO-10' ).
             v_fkimg = wa_xvbrp-fkimg.
             v_fkimg = v_fkimg / 1000.
             v_tot_qty = v_tot_qty + v_fkimg.
              do v_fkimg times.
                v_no_of_records = v_no_of_records + 1.
                wa_zmigo-sr_no = v_no_of_records.
                wa_zmigo-po_no = wa_xvbrk-vbeln.
                wa_zmigo-item_no  = wa_xvbrp-posnr.
                wa_zmigo-doc_type = wa_xvbrk-fkart.
                wa_zmigo-posting_date = wa_xvbrk-fkdat.
                wa_zmigo-created_on = sy-datum.
                wa_zmigo-created_time = sy-uzeit.
                wa_zmigo-material = wa_xvbrp-matnr.
               wa_zmigo-inv_no = wa_xvbrk-vbeln.
               wa_zmigo-inv_item_no = wa_xvbrp-posnr.
                wa_zmigo-plant = wa_xvbrp-werks.
                wa_zmigo-inv_date = wa_xvbrk-fkdat.
                wa_zmigo-customer = wa_xvbrk-kunag.
                wa_zmigo-unit = 1.
                condense wa_xvbrk-zuonr.
                wa_zmigo-reference = wa_xvbrk-zuonr.
                wa_zmigo-mtype = '602'.
    ********Bill of lading no**
               select single bill_lno from zmigo_final into v_frbnr where inv_no = wa_xvbrk-xblnr and material = wa_xvbrp-matnr.
               if sy-subrc eq 0.
               wa_zmigo-bill_lno = v_frbnr.
               endif.
                insert into zmigo values wa_zmigo.
              enddo.
              clear : wa_zmigo,wa_xvbrp , v_fkimg.
    endloop.
    endif.
    clear : v_no_of_records.
    *}   INSERT
      CALL FUNCTION 'STACK_RESET'.
      R185D-DATALOSS = SPACE.
      FOLGEAUFRUF102 = SPACE.
      PERFORM SETPAR_INIT.
    *{   INSERT         RD1K903017                                        3
    *}   INSERT
      LEAVE.
    ENDFORM.
    This program is working fine for single user but in production where no of people are creating the invoices from different places the data is not getting updated in table ZMIGO.
    sometime populating with wrong data , partial data and sometimes no updation at all.
    I have used the table locking system enqueue and dequeue FM's before n after updation but still the same
    thing is happening.
    What could be the reason.
    Looking for help very urgent any other alternate option.

    Hi,
    Go thru these..
    Enhancement
    SDVFX009 Billing doc. processing KIDONO (payment reference numbe
    SDVFX010 User exit item table for the customer lines
    SDVFX011 Userexit for the komkcv- and kompcv-structures
    V05I0001 User exits for billing index
    V05N0001 User Exits for Printing Billing Docs. using POR Procedu
    V60A0001 Customer functions in the billing document
    V60P0001 Data provision for additional fields for display in lis
    V61A0001 Customer enhancement: Pricing
    SDVFX001 User exit header line in delivery to accounting
    SDVFX002 User exit for A/R line (transfer to accounting)
    SDVFX003 User exit: Cash clearing (transfer to accounting)
    SDVFX004 User exit: G/L line (transfer to accounting)
    SDVFX008 User exit: Processing of transfer structures SD-FI
    SDVFX007 User exit: Billing plan during transfer to Accounting
    SDVFX006 User exit: Tax line (transfer to accounting)
    SDVFX005 User exit: Reserves (transfer to accounting)
    Business Add-in
    SD_CIN_LV60AU02 BADI for billing
    If it is helpful rewards points
    Regards
    Pratap.M

  • User Exit For PR Create and Change

    Hi,
       Please help me for finding User Exit while creating Purchase Requisiton(Me51/Me51n)  and aslo changing Purchase Requisiton(Me52/Me52n).
    Mainly i want to exit for validating Plant and material code while creating and changing PR.
    Thanks,
    Sunil sahoo

    Hi,
    Use the exists
    M06B0001  Role determination for purchase requisition release
    M06B0002  Changes to comm. structure for purchase requisition release
    Regards,
    Nandha

  • Help Needed: User exit for transaction IL01 and IL02

    Hi,
    First of all I would like to take you through my requirement. The
    requirement is: When I try to instal an equipment(EQ) at a functional
    location(FL) in SAP, I want to pass on the values of these two
    technical objects(EQ,FL) to an external system through SAP XI.
    I identified two user-exits for this purpose,
    they are ILOM0001 and ILOM0002. I found the first exit (ILOM0001) more
    relevant than the other as the exit ILOM0001 is responsible
    for 'Additional checks before saving a functional location'. The
    function exit for the exit ILOM0001 IS EXIT_SAPMILO0_001.
    When I load the transaction IL02 and try to instal an equipment at a
    functional location in debug mode nowhere did I notice this function exit.
    Please clarify whether this exit is called with a different name
    internally or I am looking at a different exit altogether.
    Your early response is highly appreciated.
    Thanks,
    Vijay

    Solved..........

  • User exit for VT01n (Creation of shipment)

    Hii All
    We have a requirement where we have to automatically enter the planned shipment  scheduled time & end time and date for each stage while saving the shipment.
    Can anyone let me know user exit which can be used to do the same.
    Thanks & Regards
    Gaurav

    Hi,
    You can use V56FSTAT this user exit for your purpose..
    If you want more selection of user exits you goto transaction SMOD and input V56* and then press F4,so that you can see all the user exits can be used for shipment or transportation purpose...
    Regards,
    Chandra

  • User Exit for employee creation

    Hi,
    I want to know the user exit which is called whenever the employee is created and employee number is generated.
    I found one user exit as below:
    EXIT_SAPMP50A_001
    Is it correct?
    Please advise.
    Regards
    Manish Jaiswal

    Hi Manish,
    PFB the correct user exits for the same.
    EXIT_SAPFP50M_001 - Customer Default Values for Personnel Administration and Rec
    EXIT_SAPFP50M_002 - Customer Checks for Personnel Administration and Recruitment
    Regards
    Bala

  • User-Exit for Checking Customer and Sale order type in Sales Order Creation

    Hi Experts,
      While creating the Sales Order once i enter sold-to-party and enter line item, i have to check the customer against the sales order type.
    Please suggest me if any user-exit or enhancement or BADI available for it.
    Thanks & Regards,
    -VM

    Hi
    Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
    1) Goto se24 (Display class cl_exithandler)
    2) Double click on the method GET_INSTANCE.
    3) Put a break point at Line no.25 (CASE sy-subrc).
    Now
    4) Execute SAP standard transaction
    5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
    6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    7) This way you will find all the BADIs called on click of any button in any transaction.
    mark if helpful
    Regs,
    Tushar Mundlik

  • User exit for delivery creation in VL10B/VL10G-

    Hi,
    Is there any exits available for restricting the document type while the deliveries are selected/processed using VL10B/VL10G - delivery creation in background.
    Scenario is when deliveries are created for STO's,the delivery is to be created for a selected document types(EKKO - BSART).Other types of document types have to be ignored when the delivery is created in background.
    Regards
    Deepak

    Hello Deepak
    You handle this through configuration while setting up Stock Transport Orders in MM.
    Path:  IMG/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order/Assign Delivery Type and Checking Rule
    Here you a Delivery type for a combination of Plant and PO type. So those PO types which you don't want to be included for delivery creation will not figure in this assignment. I don't think you should go down  the user exit route.
    If you still need to explore user exits, look at OSS note 198137 for a list and purpose of VL10X based exits.
    Hope this helps.

Maybe you are looking for