User exit for IDoc MBGMCR - BAPI_IDOC_INPUT1 - BAPI_GOODSMVT_CREATE

Hi Gurus,
I just want to ask if there is any user exit that I can use for this IDoc. My requirement is to check if thevalue from E1BP2017_GM_HEAD_01-REF_DOC_NO already exist in MKPF using XBLNR. If this reference document already exist, I need to raise and update the IDoc status into an error.
Thanks and best regards,
Andre

Hi,
Check the badi "LE_SHP_GOODSMOVEMENT", method "CHANGE_INPUT_HEADER_AND_ITEMS". Pass the errors in the structure CT_LOG.
Regards
Vinod

Similar Messages

User exit for IDOC in INVOICE

Hi all,
I need to add a value in a custom IDOC segment for INVOICE. The IDOC basic type used is INVOIC02. Is there any user exit which I can use to populate the IDOC data? Any help will be greatly appreciated.
Thanks,
Lalyn

Hi Lalyn,
I do not have an exact code for this.
But just go through the following code, where we are doing some validations in the segments.
Code below this line was to exclude ZRTN materials for which Subtotal 2 (KZWI2) is zero. And,
this is done for billing types:
                               ZEXP,
                               ZXAD,
                               ZXDR,
                               ZXL2,
                               ZXG2,
                               ZXPT.
IF INT_EDIDD-SEGNAM = 'E1EDS01'.
ZE1EDS01 = INT_EDIDD-SDATA.
IF ZE1EDS01-SUMID = '001'.
Start deleting when on 1st E1EDS01 segment
    DESCRIBE TABLE INT_EDIDD LINES POS.
    LOOP AT XTVBDPR.
      CLEAR MARA.
      SELECT SINGLE MTART MATKL FROM MARA INTO            "DV2K920646
      (MARA-MTART,MARA-MATKL)                             "DV2K920646
      WHERE MATNR = XTVBDPR-MATNR.     " Find material type MTART
      IF XVBDKR-FKART EQ 'ZEXP' OR XVBDKR-FKART EQ 'ZXL2' OR
         XVBDKR-FKART EQ 'ZXAD' OR XVBDKR-FKART EQ 'ZXG2' OR
         XVBDKR-FKART EQ 'ZXDR' OR XVBDKR-FKART EQ 'ZXPT'.
        IF MARA-MTART = 'ZRTN' AND XTVBDPR-KZWI2 EQ 0
         AND MARA-MATKL <> 'KEGS DM'.                  "DV2K920646
          MOVE XTVBDPR-POSNR TO POSNRS-POSNR.
          APPEND POSNRS.               " Store ZRTNs to be deleted
        ENDIF.
      ENDIF.
    ENDLOOP.
    DESCRIBE TABLE POSNRS LINES COUNT.
Reduce the number of line items by the number of them to be deleted
    ZE1EDS01-SUMME = ZE1EDS01-SUMME - COUNT.
    SHIFT ZE1EDS01-SUMME LEFT DELETING LEADING SPACE.
    INT_EDIDD-SDATA = ZE1EDS01.
    MODIFY INT_EDIDD INDEX POS TRANSPORTING SDATA.
    LOOP AT INT_EDIDD INTO IEDIDD.     " Loop and delete if in POSNRS
      IF IEDIDD-SEGNAM = 'E1EDP01' OR IEDIDD-SEGNAM = 'E1EDS01'.
        CLEAR DELETE_FLAG.
      Reset delete_flag when on next line item or done with all
      ENDIF.
      IF IEDIDD-SEGNAM = 'E1EDP01'.
        ZE1EDP01 = IEDIDD-SDATA.
        READ TABLE POSNRS WITH KEY POSNR = ZE1EDP01-POSEX.
        IF SY-SUBRC EQ 0.
          DELETE_FLAG = 'X'.
        Set delete_flag if the line item is to be deleted
        ENDIF.
      ENDIF.
      IF DELETE_FLAG = 'X'.            " Delete the line item fully
        DELETE INT_EDIDD.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDIF.
At this function module, you have to create an include and write your code.
But remember, before that you have to extend your basic type.
Hope it will help you.
sailesh

User Exit for IDOC

Hi,
For any outbound idoc, if the parameters of export/import contain EDIDC and EDIDD along with the table.
It is possible to extend the idoc and populate values?
As i don't have authroizations, i need to confirm whether an wmtcid03 idoc can be extended and values can be populated.
I found the user exit also.

Check the Function Group <b>XLID</b>,you could find few where you can track EDIDC and EDIDD and do furter manipulation as needed.
~thomas.

User exit for IDOC creation

When a credit memo is created an IDOC should be generated !
IS there any user exit where i can associate the idoc generation code when the credit memo is created?
if soo then what it is !
Edited by: Alvaro Tejada Galindo on Feb 19, 2008 5:52 PM

Just create an output type for billing and condition record to trigger the output.
Regards,
John.

User exit for IDOC inbound CREMAS

Hi experts,
I want to find a USER EXIT to change the value for vendor inbound idoc of message type CREMAS when create a new vendor or change a existing vendor. EXIT_SAPLKD02_001 is a function module can be enhanced but it cannot be called when I debug in WE19. The segment of IDOC is not extended by customazing field.
Can anyone tell me what user exit is for IDOC I can use to change the data for vendor when inbound idoc receive?

Hi panzhijun,
please check this link
http://forums.sdn.sap.com/thread.jspa?threadID=1659323
An Expert V.V.Reddy is exactly discussing about your issue on extending the FM in a Include: LKD02F01,
just have a look on this and go throw completely so u may get some solutions .
This is how somewhat i can help you , If i get any further details will let u know .
BR,
Lakshmi Rajkumar.

User Exit for Idoc being posted through ACC_DOCUMENT

Hi Experts!!
We have an inbound interface to post FI document using message type ACC_DOCUMENT. Now, we need to influence the idoc before posting. In detail, we need to change a particular field in the header and then only post it. I tried with EXIT_SAPLF050_008. But that was not being updated. Is this user exit only for a few message types like FIDCMT, FIDCC1, FIDCC2?
If yes, which user exits can be used to influence the idoc before posting?
Kindly help me out.
Thanks a lot in advance.

Hi ,
chk with these exits:
SIDOC001 -> fm EXIT_SAPLEDI1_001
SIDOC002 -> fms
EXIT_SAPLEDI6_001
EXIT_SAPLEDI6_002
EXIT_SAPLEDI6_003
hope it helps..
Regards,
Deeba

User-Exit for IDoc status

Hello all!
I'm trying to send a message with the status of an IDoc that has been processed, but I can't find an exit right after the status of the IDoc has been set, do you have any idea on what can I do for this?
Regards!

This is the exit where we have the control of setting idoc status. If there no scope of this idoc status.
Then try to find out an exit which will be triggered before this exit with idoc status ( with value ). Then export this to memory and get back the same from memory in Vijay's suggested exit.
Also if you could able to find the exit after THIS exit you won't have option to set custom idoc status.
Regds
Manohar

USER EXIT FOR IDOC CREATION AND TRIGGER

I needed a user exit in which I could call my function module .The requirement is that whenever a sales order is created or changed ,on saving of the sales order I need to trigger an IDOC .Inside my function module I plan to use the MASTER_IDOC_DISTRIBUTE
Can anyone tell me if the above logic can work and please tell me the name of the user exit which I can use?

Hi
Instead of User exit, you can think of using SAP Standard Output type functionality.
Ask your functional consultant to create a Output type with Medium 6 and do the necessary outbound configuration in the Partner profile WE20 transaciton.
Regards
Madhan D
Edited by: Madhan Doraikannan on Dec 10, 2008 10:49 AM

User exit for idoc extension for material master (matmas05)

Hello all,
I have 10 custom fields added to anl idoc of basic type matmas05.
i created a new segment under parent segment E1MARA1
Now i want to find out the user exit where in i can write a code to read the data of this segment and populate into the data base table.
Can anybody provide me with the name of the user exit?
Regards,
Roshani

Check enhancement MGV00001 in SMOD.
Exit Fm is EXIT_SAPLMV01_002
Regards,
Naimesh Patel

User exit on IDOC

Hi friends,
I am working on P.O. to S.O scenario using ale idoc. While importing the P.O idoc i need to do some changes in the values coming from P.O. idoc so for that I need to use some user exit for idoc.
Please let me know is it possible and if yes which is user exit suitable for this purpose.
Thanks & Regards,
Brijesh Soni

the exit is EXIT_SAPLVEDA_001.
thanks and regards,
siri

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

Help required regarding user exit for STPSHH01 IDOC

Need help regarding user exit.
I append the structure of VTTP and add one field with the name of ZDELCST i.e Delivery cost so i want to update that table once the idoc will post.
I have to write the user exit for this but i have no idea how to do this so kindly requesting someone to please write the code for me and i will be very grateful to him/her.
The functional module is IDOC_INPUT_SHIPPL
and there is a CALL CUSTOMER-FUNCTION '012'
this will take us to function module EXIT_SAPLV56I_012
This includes ZXV56U08
Within this include in need to map the delivery cost from the idoc to the new append filed VTTP-ZDELCST

Hi,
use this FM to update ur shipment
variables
DATA: lo_tp_g_tra       TYPE v56e_shipment_activities, "Data to modify
      lo_tp_g_shp       TYPE v56e_shipment,
      lo_tp_g_log       TYPE v56e_logfile, " Errors function
call the function to modify shipments
CALL FUNCTION 'SD_SHIPMENT_PROCESS'
IMPORTING
    e_logfile    = lo_tp_g_log
CHANGING
    c_activities = lo_tp_g_tra
    c_shipment   = lo_tp_g_shp
EXCEPTIONS
    error        = 1
    OTHERS       = 2.
Thanks,
Sendil.

User Exit for Inbound Process - Changing IDOC control record

Hi,
I want to utilize the identification field (under details tab) of the IDOC Control Record. What is the suitable user exit for inbound process that i can use to change the IDOC control record?

It's been a long time since I have done any IDOC processing.
Go to SE37 and enter the function module IDOC_INPUT_ORDERS. Display the source code. Search for "CALL CUSTOMER". You should see several "CALL CUSTOMER-FUNCTION" lines. These are enhancements where you can manipulate the IDOC data. If you locate the correct one (where the data is read from the IDOC but not yet validated), you should be able to map the partner function value. Double-clicking on the number in quotes will bring you to an "EXIT_" function module. A "ZX" INCLUDE program is referenced. If you haven't used the exit yet, double-clicking on the ZX INCLUDE will create it. The values passed into the function module are available in the INCLUDE.
Ideally, you should create a project in transaction CMOD that references the chosen enhancement. This way you can activate/deactivate without commenting/uncommenting the code in the INCLUDE.

What is the user exit for message type BENREP, IDoc BENEFIT3?

Hello,
We are looking for a user exit to use with IDoc BENEFIT3. Our benefits provider requires information which is not stored in any infotype in SAP, but can be calculated based on 3 existing infotypes. We need a user exit for this.
We thought we could use PBEN0018 w/function module EXIT_SAPLHRBEN00FEATURE_018, but our ABAP developer says this doesn't access any IDoc tables. HR_BEN_IDOC_SEND doesn't work for this purpose either. We also found PBEN0033 for function module HR_BEN_GET_IDOC_EVENTS, but this is labeled as obsolete.
Does anyone know if there is an exit for this?
Thanks much!
Anke

For future reference in case anyone is trying to do this, we were not able to find a suitable user exit to enhance BENEFIT3 IDoc, so we put in an OSS note and received the following response:
"...currently there is no user exit/Badi in SAP Benefits Administration
to enhance IDoc BENEFIT3. Such functionality is indeed missing in the
system, which means that you will need to submit a development
request to enhance the system in this respect in a future release."
Anke

User exit for inbound idoc

could anyone please tell the user exit for inbound idoc : ACC_POSTING_GL01

I thnk the inbound idoc name is ACC_GL_POSTING01. User Exit for this is EXIT_SAPLACC4_001.
*****Reward points if useful
Regards,
Kiran Bobbala

User exit for IDoc MBGMCR - BAPI_IDOC_INPUT1 - BAPI_GOODSMVT_CREATE

Similar Messages

Maybe you are looking for